Xiaoye Han
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Xiaoye Han has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Ming Zheng
Department of Mechanical, Automotive and Materials Engineering University of Windsor 401 Sunset Avenue N9B 3P4 Windsor ON Canada
11 shared publications - Jimi Tjong
PERDC, Ford, Windsor, ON N9A 6X3, Canada
6 shared publications Jimi Tjong
Department of Mechanical, Automotive, and Materials Engineering, University of Windsor, Windsor, Canada
5 shared publications- Kelvin Xie
Department of Mechanical, Automotive and Materials Engineering, University of Windsor, 401 Sunset Avenue, Windsor, ON N9B 3P4, Canada
2 shared publications Ming Zheng
Department of Mechanical, Automotive, and Materials Engineering, University of Windsor, Windsor, ON, Canada
2 shared publications- Prasad Divekar
Mechanical, Automotive, and materials Engineering, University of Windsor, Windsor, Ontario Canada N9B 3P4
2 shared publications
Latest Publications
- Open Access
- 8 December 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 236 (12) , 2661-2680
Elastic breakdown via multi-core high frequency discharge for lean-burn ignition
An advanced ignition technique is developed to achieve multi-event breakdown and multi-site ignition using a single coil for ignition quality improvements. The igniter enables a unique elastic breakdown process embracing a series of high-frequency discharge events at the spark gap. The equivalent electric circuits and current/voltage equations are identified and verified for the first time to explain the working principle that governs such an elastic breakdown process. Benchmarking tests are first performed to compare the elastic breakdown ignition with the conventional and advanced multi-electrode ignition systems. The elastic breakdown and spark events are thereafter analyzed through current and voltage measurements and high-speed imaging techniques. Finally, ignition tests in combustion chambers are performed to examine the effects on the ignition process in comparison with conventional coil-based ignition systems. The experiments show that, the elastic breakdown ignition can distribute multiple high-frequency breakdown events at all electrode pairs of a multi-electrode sparkplug while using only one ignition coil, thereby offering significant cost saving advantage and packaging practicability.
- 8 December 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 236 (12) , 2661-2680
Open AccessElastic breakdown via multi-core high frequency discharge for lean-burn ignition
An advanced ignition technique is developed to achieve multi-event breakdown and multi-site ignition using a single coil for ignition quality improvements. The igniter enables a unique elastic breakdown process embracing a series of high-frequency discharge events at the spark gap. The equivalent electric circuits and current/voltage equations are identified and verified for the first time to explain the working principle that governs such an elastic breakdown process. Benchmarking tests are first performed to compare the elastic breakdown ignition with the conventional and advanced multi-electrode ignition systems. The elastic breakdown and spark events are thereafter analyzed through current and voltage measurements and high-speed imaging techniques. Finally, ignition tests in combustion chambers are performed to examine the effects on the ignition process in comparison with conventional coil-based ignition systems. The experiments show that, the elastic breakdown ignition can distribute multiple high-frequency breakdown events at all electrode pairs of a multi-electrode sparkplug while using only one ignition coil, thereby offering significant cost saving advantage and packaging practicability.
- 12 November 2021
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 144 (8)
Neural Network Soft Sensors for Gasoline Engine Exhaust Emission Estimation
Worldwide research and development programs aim to reduce harmful emissions from transportation vehicles. Soft sensors have shown great potentials to reduce cost and improve onboard diagnosis for vehicle emission control. In this work, two sets of soft sensors are proposed to predict the emissions and exhaust heat flux of a gasoline engine. Extensive steady-state measurement points over the entire engine operating conditions are collected for model training and validation, and the locally linear model tree learning method is adopted. The CO, NOx, hydrocarbon, exhaust temperature, and exhaust heat flux are estimated by the soft sensors under steady-state conditions. Training of CO, exhaust temperature, and exhaust heat flux models has achieved high model accuracy over the entire engine map. Local models are developed for NOx and HC emissions to improve model performance at different engine operating speed/load conditions, especially in the low emission zone. Model validation has shown correlation coefficients ranging 0.983 ∼ 0.999
- 12 November 2021
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 144 (8)
Neural Network Soft Sensors for Gasoline Engine Exhaust Emission Estimation
Worldwide research and development programs aim to reduce harmful emissions from transportation vehicles. Soft sensors have shown great potentials to reduce cost and improve onboard diagnosis for vehicle emission control. In this work, two sets of soft sensors are proposed to predict the emissions and exhaust heat flux of a gasoline engine. Extensive steady-state measurement points over the entire engine operating conditions are collected for model training and validation, and the locally linear model tree learning method is adopted. The CO, NOx, hydrocarbon, exhaust temperature, and exhaust heat flux are estimated by the soft sensors under steady-state conditions. Training of CO, exhaust temperature, and exhaust heat flux models has achieved high model accuracy over the entire engine map. Local models are developed for NOx and HC emissions to improve model performance at different engine operating speed/load conditions, especially in the low emission zone. Model validation has shown correlation coefficients ranging 0.983 ∼ 0.999
- 22 October 2021
- Published by Taylor & Francis in Applied Artificial Intelligence
- Vol. 35 (15) , 1869-1886
Intelligent Detection and Real-time Monitoring of Engine Oil Aeration Using a Machine Learning Model
This research work develops a machine learning model for detecting and real-time monitoring engine oil aeration in an internal combustion engine using only single high-speed oil pressure sensor. The presented method uses a five level cascading discrete wavelet transform with Daubechies 4 tap wavelet and an associated variance metric to identify features related to oil aeration from a set of recorded oil pressure traces. A Gaussian process regression model is then used to correlate the identified features to measured oil aeration and the presented approach is successfully able to predict engine oil aeration to an uncertainty of under ±0.02 from the measured oil aeration values. The sensitivity of this method to varying sampling frequencies is also tested and the method is found to be successful over a wide range of sampling frequencies. This method of predicting measured oil aeration using a single high-speed oil pressure sensor has the benefit of monitoring engine oil aeration without the need for direct measurement.
- 22 October 2021
- Published by Taylor & Francis in Applied Artificial Intelligence
- Vol. 35 (15) , 1869-1886
Intelligent Detection and Real-time Monitoring of Engine Oil Aeration Using a Machine Learning Model
This research work develops a machine learning model for detecting and real-time monitoring engine oil aeration in an internal combustion engine using only single high-speed oil pressure sensor. The presented method uses a five level cascading discrete wavelet transform with Daubechies 4 tap wavelet and an associated variance metric to identify features related to oil aeration from a set of recorded oil pressure traces. A Gaussian process regression model is then used to correlate the identified features to measured oil aeration and the presented approach is successfully able to predict engine oil aeration to an uncertainty of under ±0.02 from the measured oil aeration values. The sensitivity of this method to varying sampling frequencies is also tested and the method is found to be successful over a wide range of sampling frequencies. This method of predicting measured oil aeration using a single high-speed oil pressure sensor has the benefit of monitoring engine oil aeration without the need for direct measurement.
- 13 October 2021
- Published by ASME International
Impact of Fuel Injection Pressure on Spray and Combustion Characteristics of OME and Diesel Blends
Emission regulations focus on the simultaneous reduction of NOx and particulate matter emissions, especially for heavy-duty engines. Oxygenated fuels offer significant advantages in reducing particulate emissions while having little effect on NOx emissions. In addition, renewable fuels present a GHG emission advantage to meet the zero-emission requirements of future hydrocarbon fuels. Among the leading contenders, oxymethylene dimethyl ether (OME) fuels have the potential to be used for direct injection applications. OME as a blend with diesel fuel offers a direct means of improving the emissions of current on-road diesel engines without modification. In this paper, an empirical investigation into spray behavior and engine performance of diesel/OME fuel at 10% by mass has been performed under various fuel injection pressures. Neat diesel fuel was tested as a baseline case. The results are compared to tests under matching conditions using a diesel and OME fuel blend with a focus on spray characteristics, combustion behavior, and engine-out emissions. The physical properties of OME improve the volatility of diesel fuel and can tolerate shorter mixing times without promoting PM production. The PM emissions were found to be reduced by up to 50% and the combustion efficiency was improved at matching NOx levels with OME blending.
- 13 October 2021
- Published by ASME International
Impact of Fuel Injection Pressure on Spray and Combustion Characteristics of OME and Diesel Blends
Emission regulations focus on the simultaneous reduction of NOx and particulate matter emissions, especially for heavy-duty engines. Oxygenated fuels offer significant advantages in reducing particulate emissions while having little effect on NOx emissions. In addition, renewable fuels present a GHG emission advantage to meet the zero-emission requirements of future hydrocarbon fuels. Among the leading contenders, oxymethylene dimethyl ether (OME) fuels have the potential to be used for direct injection applications. OME as a blend with diesel fuel offers a direct means of improving the emissions of current on-road diesel engines without modification. In this paper, an empirical investigation into spray behavior and engine performance of diesel/OME fuel at 10% by mass has been performed under various fuel injection pressures. Neat diesel fuel was tested as a baseline case. The results are compared to tests under matching conditions using a diesel and OME fuel blend with a focus on spray characteristics, combustion behavior, and engine-out emissions. The physical properties of OME improve the volatility of diesel fuel and can tolerate shorter mixing times without promoting PM production. The PM emissions were found to be reduced by up to 50% and the combustion efficiency was improved at matching NOx levels with OME blending.
- Open Access
- 16 July 2021
- Published by ASME International
An Investigation Into OME3 on a High Compression Ratio Engine
For decades, alternative fuels have been investigated to achieve high efficiency and low emission combustion in IC engines. Oxygenated fuels such as alcohols and ethers have shown advantageous benefits for their use in engine combustion. Polyoxymethylene dimethyl ether (PODE) fuels contain a high amount of oxygen (up to 50% by mass) and improved volatility as compared to diesel. In
- 16 July 2021
- Published by ASME International
Open AccessAn Investigation Into OME3 on a High Compression Ratio Engine
For decades, alternative fuels have been investigated to achieve high efficiency and low emission combustion in IC engines. Oxygenated fuels such as alcohols and ethers have shown advantageous benefits for their use in engine combustion. Polyoxymethylene dimethyl ether (PODE) fuels contain a high amount of oxygen (up to 50% by mass) and improved volatility as compared to diesel. In
- Open Access
- 4 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 104762-104774
A Study on Extreme Learning Machine for Gasoline Engine Torque Prediction
This research presents an extreme learning machine (ELM) based neural network modeling technique for gasoline engine torque prediction. The technique adopts a single-hidden layer feedforward neural network (SLFN) structure which has the potential to approximate any continuous function with high accuracy. To verify the robustness of this technique, over 3300 data points collected from a real-world gasoline engine are used to train, validate, and test the model. These data points cover a wide spectrum of normal engine operating conditions, with the engine speed from 1000 rpm to 4500 rpm, and the engine torque from idle to full load. The experiment results demonstrate that the model can predict the gasoline engine torque with high accuracy. Moreover, this research proposes a weight factor approach to further improve the prediction accuracy of the model in the desired data regions without modifying the input data set. The evaluation shows that the weight factor approach can reduce the overall prediction errors in the regions significantly. This feature is particularly useful in tuning the performance of the model when the significance of the individual data points varies, or when the distribution of the data points is imbalanced. In practice, the modeling approaches presented in this research will help reduce the engine test and verification time.
- 4 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 104762-104774
Open AccessA Study on Extreme Learning Machine for Gasoline Engine Torque Prediction
This research presents an extreme learning machine (ELM) based neural network modeling technique for gasoline engine torque prediction. The technique adopts a single-hidden layer feedforward neural network (SLFN) structure which has the potential to approximate any continuous function with high accuracy. To verify the robustness of this technique, over 3300 data points collected from a real-world gasoline engine are used to train, validate, and test the model. These data points cover a wide spectrum of normal engine operating conditions, with the engine speed from 1000 rpm to 4500 rpm, and the engine torque from idle to full load. The experiment results demonstrate that the model can predict the gasoline engine torque with high accuracy. Moreover, this research proposes a weight factor approach to further improve the prediction accuracy of the model in the desired data regions without modifying the input data set. The evaluation shows that the weight factor approach can reduce the overall prediction errors in the regions significantly. This feature is particularly useful in tuning the performance of the model when the significance of the individual data points varies, or when the distribution of the data points is imbalanced. In practice, the modeling approaches presented in this research will help reduce the engine test and verification time.
- 1 January 2020
- Published by Elsevier in Applied Energy
- Vol. 257
Study of an innovative three-pole igniter to improve efficiency and stability of gasoline combustion under charge dilution conditions
- 1 January 2020
- Published by Elsevier in Applied Energy
- Vol. 257
Study of an innovative three-pole igniter to improve efficiency and stability of gasoline combustion under charge dilution conditions
- 5 April 2016
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
The Effect of High-Power Capacitive Spark Discharge on the Ignition and Flame Propagation in a Lean and Diluted Cylinder Charge
Research studies have suggested that changes to the ignition system are required to generate a more robust flame kernel in order to secure the ignition process for the future advanced high efficiency spark-ignition (SI) engines. In a typical inductive ignition system, the spark discharge is initiated by a transient high-power electrical breakdown and sustained by a relatively low-power glow process. The electrical breakdown is characterized as a capacitive discharge process with a small quantity of energy coming mainly from the gap parasitic capacitor. Enhancement of the breakdown is a potential avenue effectively for extending the lean limit of SI engine. In this work, the effect of high-power capacitive spark discharge on the early flame kernel growth of premixed methane-air mixtures is investigated through electrical probing and optical diagnosis. The capacitance paralleled to the spark gap and the in-line resistance installed in the capacitive discharge loop are varied to produce different levels of breakdown enhancement. The burnt fraction and the ignition success rate of the premixed methane-air mixtures are analyzed to evaluate the ignitability improvement. The results indicated that the increase of the capacitance can increase the discharge current and the transient power. It is observed that the voltage buildup rate decreased because of the addition of the capacitor. Different to the conventional peaking capacitor ignition techniques, which normally employ non-resistor spark plugs, the high-power capacitive discharge ignition described in this paper employed an in-line resistor to lower the transient discharge current which might lower the electromagnet interference associated with the high-power capacitive discharge. With a 200pF parallel capacitance, the addition of a 50Ω resistance cuts off 27% peak discharge current compared with a conventional non-resistor case while maintains a same lean ignitable boundary under low pressure experiment conditions.
- 5 April 2016
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
The Effect of High-Power Capacitive Spark Discharge on the Ignition and Flame Propagation in a Lean and Diluted Cylinder Charge
Research studies have suggested that changes to the ignition system are required to generate a more robust flame kernel in order to secure the ignition process for the future advanced high efficiency spark-ignition (SI) engines. In a typical inductive ignition system, the spark discharge is initiated by a transient high-power electrical breakdown and sustained by a relatively low-power glow process. The electrical breakdown is characterized as a capacitive discharge process with a small quantity of energy coming mainly from the gap parasitic capacitor. Enhancement of the breakdown is a potential avenue effectively for extending the lean limit of SI engine. In this work, the effect of high-power capacitive spark discharge on the early flame kernel growth of premixed methane-air mixtures is investigated through electrical probing and optical diagnosis. The capacitance paralleled to the spark gap and the in-line resistance installed in the capacitive discharge loop are varied to produce different levels of breakdown enhancement. The burnt fraction and the ignition success rate of the premixed methane-air mixtures are analyzed to evaluate the ignitability improvement. The results indicated that the increase of the capacitance can increase the discharge current and the transient power. It is observed that the voltage buildup rate decreased because of the addition of the capacitor. Different to the conventional peaking capacitor ignition techniques, which normally employ non-resistor spark plugs, the high-power capacitive discharge ignition described in this paper employed an in-line resistor to lower the transient discharge current which might lower the electromagnet interference associated with the high-power capacitive discharge. With a 200pF parallel capacitance, the addition of a 50Ω resistance cuts off 27% peak discharge current compared with a conventional non-resistor case while maintains a same lean ignitable boundary under low pressure experiment conditions.
- 2 June 2015
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 137 (12) , 121501
A Study of Combustion Inefficiency in Diesel Low Temperature Combustion and Gasoline–Diesel RCCI Via Detailed Emission Measurement
Reduction of engine-out NOx emissions to ultra-low levels is facilitated by enabling low temperature combustion (LTC) strategies. However, there is a significant energy penalty in terms of combustion efficiency as evidenced by the high levels of hydrocarbon (HC), carbon monoxide (CO), and hydrogen emissions. In this work, the net fuel energy lost as a result of incomplete combustion in two different LTC regimes is studied—partially premixed compression ignition (PPCI) using in-cylinder injection of diesel fuel and reactivity controlled compression ignition (RCCI) of port injected gasoline and direct injected diesel. A detailed analysis of the incomplete combustion products was conducted. Test results indicated that carbon monoxide (CO), hydrogen, and light hydrocarbon (HC) made up for most of the combustion in-efficiency in the PPCI mode, while heavier HC and aromatics were significantly higher in the RCCI mode.
- 2 June 2015
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 137 (12) , 121501
A Study of Combustion Inefficiency in Diesel Low Temperature Combustion and Gasoline–Diesel RCCI Via Detailed Emission Measurement
Reduction of engine-out NOx emissions to ultra-low levels is facilitated by enabling low temperature combustion (LTC) strategies. However, there is a significant energy penalty in terms of combustion efficiency as evidenced by the high levels of hydrocarbon (HC), carbon monoxide (CO), and hydrogen emissions. In this work, the net fuel energy lost as a result of incomplete combustion in two different LTC regimes is studied—partially premixed compression ignition (PPCI) using in-cylinder injection of diesel fuel and reactivity controlled compression ignition (RCCI) of port injected gasoline and direct injected diesel. A detailed analysis of the incomplete combustion products was conducted. Test results indicated that carbon monoxide (CO), hydrogen, and light hydrocarbon (HC) made up for most of the combustion in-efficiency in the PPCI mode, while heavier HC and aromatics were significantly higher in the RCCI mode.