SLSimone Lamon

Simone Lamon

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Simone Lamon has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Two-photon-nanoprinted Pancharatnam–Berry phase element for compact high-aspect-ratio optical needle generation

    by Ruochen Li, Yunyue Zhang, Wei Xin, Yipin Sun, Weijun Sun, Chao Meng, Yuting Guo, Xiaoxiang Zhang, Simone Lamon, Haoyi Yu

    Optical needle beams combine tight transverse confinement with an extended focus length, but conventional generation methods generally require multiple diffractive and refractive components, limiting system miniaturization and integration. Here, we demonstrate a single nanoprinted Pancharatnam–Berry geometric-phase element that simultaneously performs focusing and axial beam shaping without an additional focusing lens. A multi-plane inverse-design algorithm based on Rayleigh–Sommerfeld diffraction is used to optimize the optical intensity distribution throughout the target three-dimensional volume. The resulting phase profile is encoded into the spatial orientations of anisotropic dielectric elements and fabricated by free-form two-photon nanolithography. With a diameter of approximately 100 µm, the fabricated element generates an optical needle with a transverse full width at half maximum of approximately 1.47 µm over an axial distance of 31.25 µm, corresponding to an aspect ratio exceeding 21:1. This single-element approach provides a flexible route toward compact three-dimensional light-field engineering and could facilitate miniaturized systems for optical imaging, manipulation, and laser processing.

  • Giant phonon-assisted upconversion photoluminescence of in situ photo-carbonized polymer dots for 3D high-definition optical disks

    by Hui Zhang, Simone Lamon, Haoyi Yu, Weizhao Gu, Haibo Ding, Liying Liu, Qiming Zhang, Min Gu

  • Open Access

    Chip‐Compatible Optical Field Manipulation for a Single Mode Fiber Using Ultrathin 3D‐Nanoprinted Diffractive Neural Surfaces

    by Jiayue Zhang, Haoyi Yu, Chao Meng, Yuting Guo, Wei Xin, Weijun Sun, Yipin Sun, Ruochen Li, Hanyu Sun, Simone Lamon, et al.

    Hybrid optical computing seeks to merge the versatility of free‐space diffractive systems with the compactness and stability of integrated photonics, thereby providing a promising hardware platform for high‐bandwidth, low‐latency optical interconnects in GPU‐accelerated and data‐intensive computing systems. Yet, this integration remains fundamentally limited by the mismatch between guided optical modes and free‐space architectures, which typically require complex alignment and mode adaptation. Here, we introduce miniaturized vertical diffractive surfaces (MVDSs)—a new class of chip‐compatible diffractive neural surfaces that unify diffractive neural network principles with integrated photonic platforms. By combining physics‐driven neural network design with ultrafast three‐dimensional Galvo‐dithering and scanning two‐photon nanolithography (3D GDS‐TPN), we fabricate wavelength‐scale diffractive elements featuring vertical optical geometries, subwavelength alignment precision, and high structural scalability. These MVDSs perform diverse optical transformations—including focusing, beam steering, orbital angular momentum (OAM) generation—with diffraction efficiencies up to 91%. This work establishes a design and fabrication paradigm that bridges free‐space diffractive optics and guided‐wave photonics, enabling hybrid optical neural architectures where light itself performs customizable wavefront transformation and beam control at the chip scale.

  • Ultrabright Upconversion in Thermally Crystallized BaYF5:Yb,Er Glass-Ceramics via Dopant Enrichment for Reconfigurable Optical Data Encoding and Logic Operations

    by Tianfeng Weng, Simone Lamon, Zongsong Gan, Min Gu, Qiming Zhang

    All-optical data encoding provides a route to ultrafast, low-energy photonic memory and computation, yet its implementation is hindered by weak nonlinearities and low emission efficiencies in conventional materials. Upconversion luminescence offers strong nonlinear behavior, but typical hosts suffer from inefficient energy transfer, dilute and randomly distributed dopants, and complex excitation demands. Here, we report thermally crystallized BaYF5:Yb,Er glass-ceramics that overcome low upconversion efficiency and dopant inhomogeneity through controlled Er3+ enrichment within BaYF5 nanocrystals. Thermal crystallization reduces interionic distances, promoting cooperative Yb3+–Er3+ sensitization and Er3+–Er3+ energy migration. The combination of theoretical modeling and experiments shows efficient population of high-energy emitting states, yielding ultrabright upconversion emission with enhancement factors of 113-, 118-, and 110-fold for the blue, green, and red channels under 980 nm excitation. Optimized nanocrystals also prolong emission lifetimes, suppress nonradiative relaxation, and produce clear saturation behavior. Leveraging strongly nonlinear responses, power- and pulse-width-modulated excitation enables precise control of both spectral and temporal outputs, forming a highly reconfigurable platform. This allows multidimensional data encoding and implementation of fundamental optical logic gates with high fidelity and self-referenced decoding. The system offers robust, secure, and scalable functionality for advanced all-optical information processing applications.

  • Open Access

    Topology-driven energy transfer networks for upconversion stimulated emission depletion microscopy

    by Weizhao Gu, Simone Lamon, Haoyi Yu, Qiming Zhang, Min Gu

    Lanthanide-doped upconversion nanoparticles enable upconversion stimulated emission depletion microscopy with high photostability and low-intensity near-infrared continuous-wave lasers. Controlling energy transfer dynamics in these nanoparticles is crucial for super-resolution microscopy with minimal laser intensities and high photon budgets. However, traditional methods neglect the spatial distribution of lanthanide ions and its effect on energy transfer dynamics. Here, we introduce topology-driven energy transfer networks in lanthanide-doped upconversion nanoparticles for upconversion stimulated emission depletion microscopy with reduced laser intensities, maintaining a high photon budget. Spatial separation of Yb 3+ sensitizers and Tm 3+ emitters in 50-nm core-shell nanoparticles enhance energy transfer dynamics for super-resolution microscopy. Topology-dependent energy migration produces strong 450-nm upconversion luminescence under low-power 980-nm excitation. Enhanced cross-relaxation improves optical switching efficiency, achieving a saturation intensity of 0.06 MW cm −2 under excitation at 980 nm and depletion at 808 nm. Super-resolution imaging with a 65-nm lateral resolution is achieved using intensities of 0.03 MW cm −2 for a Gaussian-shaped excitation laser at 980 nm and 1 MW cm −2 for a donut-shaped depletion laser at 808 nm, representing a 10-fold reduction in excitation intensity and a 3-fold reduction in depletion intensity compared to conventional methods. These findings demonstrate the potential of harnessing topology-dependent energy transfer dynamics in upconversion nanoparticles for advancing low-power super-resolution applications.


  • Two-wavelength achromatic diffractive microlens designed by height optimization method fabricated by two-photon nanolithography

    by Yipin Sun, Weijun Sun, Chao Meng, Simone Lamon, Yuting Guo, Jiayue Zhang, Haoyi Yu

    Three-dimensional two-photon nanolithography (3D TPN) enables the mask-free fabrication of arbitrary 3D microstructures, which makes it a powerful tool for creating complex micrometer-scale diffractive optical elements (DOEs) in micro-optics and nanophotonics. Among these, the development of multiwavelength achromatic diffractive microlenses has emerged as a critical challenge, as conventional methods often rely on computationally intensive full-wave Maxwell simulations (e.g., finite-difference time-domain, FDTD) or complex meta-atom fabrication processes. Here, we propose an optimization framework that integrates the optical path difference equation into the Rayleigh-Sommerfeld diffraction equation, enabling direct optimization of height distribution for multiwavelength diffractive microlenses with significantly reduced computational demands compared to FDTD-based approaches. As a demonstration, we designed and fabricated a dual-wavelength (green and near-infrared) height-optimized achromatic microlens using 3D TPN, achieving excellent agreement between experimental characterization and theoretical calculations. Our approach offers a computationally efficient strategy for advancing multiwavelength DOE design, with potential applications in integrated photonics and bioimaging.


  • Light field manipulation using micrometer-scale diffractive surfaces fabricated by two-photon nanolithography

    by Yuting Guo, Chao Meng, Jiayue Zhang, Wei Xin, Simone Lamon, Qiming Zhang, Min Gu, Haoyi Yu

    The manipulation of light at the micrometer scale has been the core technology for the recent development of diffractive optics, especially for optical displays and diffractive neural networks (NNs). However, the factors that influence the diffraction efficiency of the diffractive surfaces have not been well understood. Taking advantage of a simplified physics-driven neural network model and two-photon nanolithography (TPN) technology, we theoretically and experimentally investigated the factors that influence the diffraction efficiency of the diffractive surfaces, such as diffraction propagation distances and a variety of diffraction patterns with different geometrical features, the result of which enables the generation of two-dimensional images with high diffraction efficiencies through the diffractive surfaces with a thickness of less than 1 μm and a size of 100 μm by 100 μm. The demonstrated results are of great significance for optical light manipulation in optical display and computational imaging using free-space diffractive optical elements.


  • Femtosecond laser melting upconversion nanoparticles for sub-micrometer optical patterning

    by Weizhao Gu, Simone Lamon, Min Gu, Qiming Zhang

    This study introduces a method for precise modulation of upconversion luminescence (UCL) in UCNP thin films via laser-induced melting, enabling high-resolution, sub-micrometer optical patterning. By employing a 460-nm femtosecond (fs) laser, localized melting disrupts the UCNP crystalline lattice, facilitating tunable UCL quenching with efficiencies exceeding 90%. This approach relies solely on the intrinsic properties of UCNPs, avoiding the need for composite materials or complex multi-stimulus systems. The technique provides precise control of UCL modulation, making it suitable for sub-micrometer-scale optical patterning.


  • Top Cited Papers

    All-optical image transportation through a multimode fibre using a miniaturized diffractive neural network on the distal facet

    by Haoyi Yu, Zihao Huang, Simone Lamon, Baokai Wang, Haibo Ding, Jian Lin, Qi Wang, Haitao Luan, Min Gu, Qiming Zhang