HYHaoyi Yu

Haoyi Yu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Haoyi Yu has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Two-photon-nanoprinted Pancharatnam–Berry phase element for compact high-aspect-ratio optical needle generation

    by Ruochen Li, Yunyue Zhang, Wei Xin, Yipin Sun, Weijun Sun, Chao Meng, Yuting Guo, Xiaoxiang Zhang, Simone Lamon, Haoyi Yu

    Optical needle beams combine tight transverse confinement with an extended focus length, but conventional generation methods generally require multiple diffractive and refractive components, limiting system miniaturization and integration. Here, we demonstrate a single nanoprinted Pancharatnam–Berry geometric-phase element that simultaneously performs focusing and axial beam shaping without an additional focusing lens. A multi-plane inverse-design algorithm based on Rayleigh–Sommerfeld diffraction is used to optimize the optical intensity distribution throughout the target three-dimensional volume. The resulting phase profile is encoded into the spatial orientations of anisotropic dielectric elements and fabricated by free-form two-photon nanolithography. With a diameter of approximately 100 µm, the fabricated element generates an optical needle with a transverse full width at half maximum of approximately 1.47 µm over an axial distance of 31.25 µm, corresponding to an aspect ratio exceeding 21:1. This single-element approach provides a flexible route toward compact three-dimensional light-field engineering and could facilitate miniaturized systems for optical imaging, manipulation, and laser processing.

  • Ultrathin high-refractive-index coating for enhanced phase modulation in two-photon-printed diffractive optical elements

    by Li Li, Zhengfen Wan, Xiao Huang, Simone Lamon, Haoyi Yu

    Two-photon lithography (TPL) enables three-dimensional micro/nano-fabrication for diffractive optical neural networks (D2NNs), but its commonly used polymeric materials exhibit low refractive indices, limiting phase modulation and diffraction efficiency in compact optical processors. Here, we introduce an ultrathin high-refractive-index ZnO coating (44.5 nm, λ/10 at 532 nm) on TPL-fabricated blazed gratings and Fresnel microlenses to overcome this intrinsic material limitation. The conformal ZnO layer preserves the original polymer microstructure geometry while significantly increasing the local optical path difference, thereby enhancing phase accumulation for high-fidelity diffraction. Experimental measurements show that diffraction efficiency is improved by 20% for blazed gratings and >50% for microlenses, accompanied by stronger focal confinement and reduced FWHM, consistent with enhanced wavefront control. Material characterization via XPS, XRD, SEM, and EDS confirms uniformity, crystallinity, and chemical stability of the ZnO coating. This hybrid polymer–ZnO strategy addresses the low-index limitation of TPL materials and demonstrates a feasible route toward compact, high-performance D2NN components with precise phase modulation and energy-efficient optical processing.

  • Giant phonon-assisted upconversion photoluminescence of in situ photo-carbonized polymer dots for 3D high-definition optical disks

    by Hui Zhang, Simone Lamon, Haoyi Yu, Weizhao Gu, Haibo Ding, Liying Liu, Qiming Zhang, Min Gu

  • Open Access

    Chip‐Compatible Optical Field Manipulation for a Single Mode Fiber Using Ultrathin 3D‐Nanoprinted Diffractive Neural Surfaces

    by Jiayue Zhang, Haoyi Yu, Chao Meng, Yuting Guo, Wei Xin, Weijun Sun, Yipin Sun, Ruochen Li, Hanyu Sun, Simone Lamon, et al.

    Hybrid optical computing seeks to merge the versatility of free‐space diffractive systems with the compactness and stability of integrated photonics, thereby providing a promising hardware platform for high‐bandwidth, low‐latency optical interconnects in GPU‐accelerated and data‐intensive computing systems. Yet, this integration remains fundamentally limited by the mismatch between guided optical modes and free‐space architectures, which typically require complex alignment and mode adaptation. Here, we introduce miniaturized vertical diffractive surfaces (MVDSs)—a new class of chip‐compatible diffractive neural surfaces that unify diffractive neural network principles with integrated photonic platforms. By combining physics‐driven neural network design with ultrafast three‐dimensional Galvo‐dithering and scanning two‐photon nanolithography (3D GDS‐TPN), we fabricate wavelength‐scale diffractive elements featuring vertical optical geometries, subwavelength alignment precision, and high structural scalability. These MVDSs perform diverse optical transformations—including focusing, beam steering, orbital angular momentum (OAM) generation—with diffraction efficiencies up to 91%. This work establishes a design and fabrication paradigm that bridges free‐space diffractive optics and guided‐wave photonics, enabling hybrid optical neural architectures where light itself performs customizable wavefront transformation and beam control at the chip scale.

  • Open Access

    Demultiplexing through a multimode fiber using chip-scale diffractive neural networks

    by Qian Zhang, Haoyi Yu, Jie Zhang, Yuedi Zhang, Chao Meng, Jiali Sun, Yu Miao, Qiming Zhang, Min Gu, Juergen Czarske

    The explosive growth of global data traffic is pushing conventional single-mode fiber systems toward their fundamental capacity limits. Multimode fibers (MMFs) using space-division multiplexing (SDM) are promising for improved transmission capacity, connection flexibility, and security of data. However, the complex transmission characteristics of MMFs significantly hinder precise mode demultiplexing. Conventional approaches, such as holographic measurements, phase recovery algorithms, photonic lanterns, and multi-plane light conversion, are severely limited by instability, ambiguity, flexibility, or the complexity of the system. In this paper, we demonstrate for the first time a purely optical, chip-scale AI solution for high-mode isolation, speed-of-light demultiplexing of MMF modes using a three-dimensional diffractive neural network (DNN). The DNN is trained with synthetic modal data and fabricated using two-photon nanolithography. It features a compact size of 120μm ×120μm ×80μm and a diffractive structure size of 1μm for the neurons at the hidden layers of the network. The proposed DNN-based demultiplexer achieves a relative modal amplitude error of 6.93% in simulation and 17.96% in experiment. The AI approach of DNN allows for flexible design and overcomes the size and performance limitations of digital-optical demultiplexers. This work paves the way for compact, low-latency optical processors for high-performance demultiplexers and enables scalable, chip-integrated solutions for next-generation fiber optic networks.


  • Two-wavelength achromatic diffractive microlens designed by height optimization method fabricated by two-photon nanolithography

    by Yipin Sun, Weijun Sun, Chao Meng, Simone Lamon, Yuting Guo, Jiayue Zhang, Haoyi Yu

    Three-dimensional two-photon nanolithography (3D TPN) enables the mask-free fabrication of arbitrary 3D microstructures, which makes it a powerful tool for creating complex micrometer-scale diffractive optical elements (DOEs) in micro-optics and nanophotonics. Among these, the development of multiwavelength achromatic diffractive microlenses has emerged as a critical challenge, as conventional methods often rely on computationally intensive full-wave Maxwell simulations (e.g., finite-difference time-domain, FDTD) or complex meta-atom fabrication processes. Here, we propose an optimization framework that integrates the optical path difference equation into the Rayleigh-Sommerfeld diffraction equation, enabling direct optimization of height distribution for multiwavelength diffractive microlenses with significantly reduced computational demands compared to FDTD-based approaches. As a demonstration, we designed and fabricated a dual-wavelength (green and near-infrared) height-optimized achromatic microlens using 3D TPN, achieving excellent agreement between experimental characterization and theoretical calculations. Our approach offers a computationally efficient strategy for advancing multiwavelength DOE design, with potential applications in integrated photonics and bioimaging.


  • Light field manipulation using micrometer-scale diffractive surfaces fabricated by two-photon nanolithography

    by Yuting Guo, Chao Meng, Jiayue Zhang, Wei Xin, Simone Lamon, Qiming Zhang, Min Gu, Haoyi Yu

    The manipulation of light at the micrometer scale has been the core technology for the recent development of diffractive optics, especially for optical displays and diffractive neural networks (NNs). However, the factors that influence the diffraction efficiency of the diffractive surfaces have not been well understood. Taking advantage of a simplified physics-driven neural network model and two-photon nanolithography (TPN) technology, we theoretically and experimentally investigated the factors that influence the diffraction efficiency of the diffractive surfaces, such as diffraction propagation distances and a variety of diffraction patterns with different geometrical features, the result of which enables the generation of two-dimensional images with high diffraction efficiencies through the diffractive surfaces with a thickness of less than 1 μm and a size of 100 μm by 100 μm. The demonstrated results are of great significance for optical light manipulation in optical display and computational imaging using free-space diffractive optical elements.


  • Super-resolution optical imaging and memory enabled by scattering suppression of shell-coated gold nanorods

    by Xiangyu Ma, Le Gao, Longfang Yao, Jing Wang, Haoyi Yu, Min Gu, Qiming Zhang

    Owing to sensitive nonlinear plasmonic responses, anisotropic metal nanoparticles are effective nanoprobes for optical imaging. However, the photo-thermal instability issues have hindered their further nanophotonics application potentials. In this letter, we reported the super-resolution imaging and optical memory by suppressing the plasmonic scattering signal of core-shell gold nanorods (GNRs). Good thermal stability and conductivity from GNRs coated with 20 nm silica shell supported the super-resolution imaging with a lateral feature size of 114 nm (λ/5.6) via a very low suppressing laser power (0.9 mW). The GNRs were then employed for achieving super-resolved bioimaging with a feature size of 128 nm (λ/5). More importantly, we were able to realize the super-resolution optical recording (feature size: 173 nm) in a GNRs-polyvinyl alcohol sample. This work further extends our understanding of the nanophotonics application of core-shell anisotropic metal nanoparticles based on nonlinear plasmonic scattering.


  • Open Access

    Three-Dimensional High-Resolution Laser Lithography of CsPbBr3 Quantum Dots in Photoresist with Sub-100 nm Feature Size

    by Boyuan Cai, Haoran Jiang, Run Bai, Shengting Zhu, Yinan Zhang, Haoyi Yu, Min Gu, Qiming Zhang

    Perovskite quantum dots (PQDs), with their excellent optical properties, have become a leading semiconductor material in the field of optoelectronics. However, to date, it has been a challenge to achieve the three-dimensional high-resolution patterning of perovskite quantum dots. In this paper, an in situ femtosecond laser-direct-writing technology was demonstrated for three-dimensional high-resolution patterned CsPbBr3 PQDs using a two-photon photoresist nanocomposite doped with the CsPbBr3 perovskite precursor. By adjusting the laser processing parameters, the minimum line width of the PQDs material was confirmed to be 98.6 nm, achieving a sub-100 nm PQDs nanowire for the first time. In addition, the fluorescence intensity of the laser-processed PQDs can be regulated by the laser power. Our findings provide a new technology for fabricating high-resolution display devices based on laser-direct-writing CsPbBr3 PQDs materials.


  • Top Cited Papers

    All-optical image transportation through a multimode fibre using a miniaturized diffractive neural network on the distal facet

    by Haoyi Yu, Zihao Huang, Simone Lamon, Baokai Wang, Haibo Ding, Jian Lin, Qi Wang, Haitao Luan, Min Gu, Qiming Zhang