TYTianhui Yang

Tianhui Yang

*This is an algorithmically generated author record based on publicly available information.

Tianhui Yang has a total of 52 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Study on the Press-Fitting Process of HCC Power Components Based on Large-Sized IGCT Devices

    by Tianhui Yang, Lu Qu, Xiaoguang Wei, Zhanqing Yu, Fang Cai, Xu He, Gongyi Zhang, Chengbo Lei

    With the increasing demand for power transmission capacity, the required capacity for converters have grown accordingly, posing severe challenges to the press-fitting reliability of large-sized, multistage integrated gate commutated thyristor (IGCT) components in the hybrid commutated converter (HCC) systems. This study addresses the unclear thermo‑mechanical coupling mechanisms for the press-fitting process of large-sized, multistage IGCT components suitable for HCC. The 6-inch IGCT device/component is selected as the research subject, and numerical calculations, simulation analysis, and experimental validation are employed in this study. A thermal-mechanical coupling model for IGCT device/component is established, and a test platform for thermal resistance under various press-fitting conditions is developed. Through comparative analysis of the thermal resistance characteristics of IGCT device/component under different clamping forces and pressure uniformities, the coupled influences of series count, clamping force, contact position, and contact area percentage on thermal characteristics of the IGCT device/component were elucidated and summarized. Based on these findings, press-fitting process guidelines for HCC power component utilizing large-sized IGCT devices are proposed: for 6-inch press-fitting IGCT devices, it is recommended that a total clamping force exceeding 100 kN should be applied in practical operation, with center clamping and contact area percentage exceeding 70%.

  • Principle, Modeling and Experiment of a New Axial-Type Superconducting Magnetic Bearing With Superconducting Coil

    by Wenxin Li, Tianhui Yang, Ying Xin

    In this paper, we proposed a new axial-type superconducting magnetic bearing (SMB) based on the interaction behavior between a permanent magnet and two closed superconducting coils. Firstly, the principle of the new SMB was presented. Then, the axial restoration characteristic is simulated based on a finite element simulation model. With the simulation results, the optimized parameters for designing the new SMB are obtained. Finally, we built a prototype of the axial SMB and a testing platform for measuring its axial restoring force. The experimental results indicated that the new axial-type SMB has practical axial double-direction stiffness and stability, and may provide an alternative technology for horizontal axle type flywheel energy storage system.


  • Concept of an Auxiliary System for Carrier-Based Aircraft Catapult

    by Wenxin Li, Tianhui Yang, Ying Xin

    In recent years, a new type of superconducting energy storage is proposed based on the interaction of a permanent magnet and a superconducting coil, and many studies on the superconducting energy storage have been conducted. Based on its unique ability of directly realizing energy conversion of mechanical → electromagnetic → mechanical, the new energy storage has promising potential in the applications of utilizing mechanical energy, such as the aircraft catapult. In this paper, we proposed an auxiliary system for the aircraft catapult using the new superconducting energy storage. It works with the conventional aircraft catapult, such as steam catapult and electromagnetic catapult, to realize the catapult capability improvement and energy regeneration. The expected structure and working principle are introduced. The simulation results indicate that a meter-scale auxiliary system can provide propulsion force of average about 100 kN at the beginning of launching, which is significantly helpful. Therefore, we confidently believe that the auxiliary system will greatly enhance the capability of aircraft catapults, both the steam catapult and electromagnetic catapult, which brings a breakthrough in aircraft catapult technology.


  • Comparative study of current carrying capacity between 1G and 2G HTS tape samples at different temperatures and magnetic fields

    by Tianhui Yang, Wenxin Li, Ying Xin

    Two categories of high-temperature superconducting (HTS) tapes, the silver-sheathed BSCCO tape (1G HTS tape) and REBCO coated conductor (2G HTS tape), have been commercialized worldwide and widely used in applications. In this study, the 1G HTS tape produced by Sumitomo and 2G HTS tape produced by Superpower were selected for a systematic comparative study in critical current (I c) performances under various temperature and magnetic field conditions. The anisotropy and I c variation patterns of these two types of samples in the temperature range of 25–77 K, magnetic field from 0 to 7 T and field angle from 0 to 90° were compared and analyzed. The results of this study reveal certain comprehensive characteristic features of these two categories of HTS tapes, supplementing some new systematic information to the literature.


  • Experimental study on AC loss of 1G and 2G HTS coils with an identical structure, geometry and number of turns

    by Yan Zhang, Tianhui Yang, Wenxin Li, Yuying Xing, Ning Li, Chao Li, Ying Xin

    Devices made of High Temperature Superconductor (HTS) will suffer AC loss during AC operations, which has unnegligible influence on energy consumption, overall efficiency, cooling cost, and operational stability of the devices. In this study, comparative measurements on 1G and 2G HTS coil samples with an identical structure, geometry, and number of turns were systematically conducted with a calorimetric method at different current values (I rmss) and frequencies (fs). The AC loss characteristics of the HTS samples were analyzed and compared based on the experimental results. The results show that eddy current and coupling play a more dominant role than magnetic hysteresis in the total AC loss of coils made of HTS tapes. The AC loss of both samples increases with I rms and f, but the AC loss is more sensitive to I rms than to f. Under the same conditions, the 1G coil sample has a slightly larger AC loss than the 2G one.


  • The Study on Propulsion Force Character of an Integrated Operation System for HTS Maglev Train

    by Wei Hong, Changqi Wang, Wenxin Li, Tianhui Yang, Ying Xin

    The high temperature superconductor (HTS) maglev train has several merits in compare with other ones. In our previous work, the feasibility of using electromagnetic guideway (EMG) in HTS maglev trains has been verified and the HTS bulk is proved to gain repulsive force in a reversed magnetic field, which can be used for propulsion function based on EMG in HTS maglev train. In this paper, the repulsive force under different factors are experimented in both EMG unit and segment. With the single EMG unit, the propulsion force under different levitation height, different operation velocities and the hysteresis of propulsion force are discussed. With a 60 cm EMG segment, the periodicity of propulsion forces is discussed and a free propulsion experiment were conducted. The results verify the feasibility of a levitation, guidance and propulsion integrated operation system in HTS maglev train and can support the further development of it.


  • The Interaction Between a High-Temperature Superconducting Coil and In-Series Permanent Magnets

    by Gengyao Li, Chao Li, Bo Han, Bin Li, Wenxin Li, Tianhui Yang, Ying Xin

    Due to excellent properties of large current-carrying capability and high critical magnetic field, high-temperature superconducting (HTS) materials play an increasingly important role in the field of energy storage. The superconducting magnetic energy storage generally needs power electronic converters to realize the power exchange, where the loss is inevitable. In this paper, the interaction between a closed HTS coil and in-series permanent magnets are investigated, which can realize the efficient storage and release of electromagnetic energy without power electronic converters. The working principle and performance of the proposed structure have been verified through both simulation and experimental tests. The results can provide an insight into constructing high-performance superconducting magnetic energy storage devices.


  • Experiment Studies of a DC Inductive Superconducting Fault Current Limiter With Energy Dissipation Capability

    by Changqi Wang, Wei Hong, Jianing Lu, Bin Li, Ying Xin, Wenxin Li, Tianhui Yang, Yumin Zhang

    The fast dc fault current-limiting and the fast fault isolation are both necessary technologies in dc power system. In this research, a self-adaptive dc inductive superconducting fault current limiter (SFCL) with energy dissipation capability was proposed, which can restrict dc fault current rising-rate and amplitude at the initial stage of dc fault. At the same time, it can also accelerate the fault isolation speed of dc circuit breaker. The structure and working principle of the proposed SFCL was deeply discussed firstly, the mathematical model at different operation stages was calculated. Then, the dc short-circuit tests were carried out on the experiment platform which consist the SFCL prototype and a dc circuit breaker connected to it. Finally, according to the experiment results, the current-limiting performances of SFCL were detailedly analyzed, including the limitation rate, the fault current cleaning speed, the energy absorption, etc.


  • Exploration on the application of a new type of superconducting energy storage for regenerative braking in urban rail transit

    by Wenxin Li, Tianhui Yang, Chao Li, Gengyao Li, Ying Xin

    Regenerative braking technology has become increasingly attractive due to its ability to recover and reuse the energy that would otherwise be lost. In recent years, a new superconducting energy storage technology is proposed and it has been proved experimentally and analytically that the technology has promising application potential in urban rail transit for regenerative braking. However, a comprehensive assessment of the new technology has not been conducted up to date. In this paper, the currently available energy storage technologies for regenerative braking, such as batteries, supercapacitors, flywheels, and SMES are introduced along with the new superconducting energy storage technology. Comparative studies between the existing technologies and the new one are conducted in terms of energy density, energy conversion efficiency, energy storage duration, capital cost and environmental impact. It is concluded that a regenerative braking system with the new superconducting energy storage has very high cycle efficiency and is superior to the existing energy storage systems. It has the potential to revolutionize the regenerative braking technology and to develop more efficient and sustainable urban rail transportation systems.


  • Open Access

    Origin of the anomalous electromechanical interaction between a moving magnetic dipole and a closed superconducting loop

    by Hongye Zhang, Tianhui Yang, Wenxin Li, Ying Xin, Chao Li, Matteo F Iacchetti, Alexander C Smith, Markus Mueller

    Lenz’s law states that ‘the current induced in a circuit due to a change in a magnetic field is directed to oppose the change in flux and to exert a mechanical force which opposes the motion’. This statement has been widely adopted to predict many effects in electromagnetism. However, multiple recent experimental measurements have shown that the interactions between a moving permanent magnet (PM) and a closed superconducting loop can disobey the fundamental statement of Lenz’s law: during the entire process of a PM threading a high temperature superconducting (HTS) coil, the current induced in the HTS coil keeps the same direction, and thus the mechanical force exerted on the PM does not always oppose its movement. The seeming ‘Lenz’s law-violated phenomenon’, namely the anomalous electromechanical interaction between a moving PM and a closed superconducting loop, can bring about numerous potential applications in the domains of superconducting magnetic energy storage, electromagnetic ejection, and flux pumps, etc. However, the cause of this anomalous phenomenon remains controversial. By representing the PM as a magnetic dipole, taking the perfect conductor approximation for the closed superconducting loop, this paper has theoretically studied the anomalous electromechanical effect with rigorous mathematical formulae derivation. The proposed analytical equations have been verified by numerical modelling and experimental measurements, which further confirms the effectiveness of the perfect conductor approximation in ease of calculation. Results have shown that both the induced electromotive force and the intrinsic properties of the conductive loop (resistance-dominant or inductance-dominant) determine together the electromechanical performance of the studied energy conversion system, and the nearly zero resistivity of superconductors is the dominant cause of the anomalous phenomenon. This paper has illuminated the origin of the anomalous electromechanical interaction between a moving magnetic dipole and a closed superconducting loop, provided an efficient and reliable tool to predict the electromechanical performance of the studied energy conversion system, and is believed to deepen people’s understanding of the interactions between magnetic field sources and superconductors.