Wenxin Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wenxin Li has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Ying Xin
School of Electrical & Information Engineering, Tianjin University, Tianjin 300072, People’s Republic of China
18 shared publications - Tianhui Yang
Beijing Huairou Laboratory, Beijing, China
14 shared publications - Chao Li
Tianjin University
6 shared publications - Wei Hong
School of New Energy and Intelligent Connected Vehicle, Anhui University of Science and Technology, Hefei, China
5 shared publications Gengyao Li
School of Electrical and Information Engineering, Tianjin University, No. 92, Weijin Rd., Tianjin 300072, People’s Republic of China
4 shared publicationsTianhui Yang
Beijing Huairou Laboratory, Beijing 101400, People’s Republic of China
3 shared publications
Latest Publications
- Open Access
- 28 July 2026
- Published by Elsevier in Superconductivity
- Vol. 19
An overview of magnetic confinement fusion:tokamak, stellarator, reversed-field pinch, field-reversed configuration, magnetic mirror
- 28 July 2026
- Published by Elsevier in Superconductivity
- Vol. 19
Open AccessAn overview of magnetic confinement fusion:tokamak, stellarator, reversed-field pinch, field-reversed configuration, magnetic mirror
- Open Access
- 21 August 2025
- Published by Universal Wiser Publisher Pte. Ltd in Journal of Electronics and Electrical Engineering
- p. 124-132
The Unique Interaction Behavior Between A Superconductor Coil And A Magnet: A Comprehensive Review
It was found that the interaction between a superconductor coil and a magnet does not comply with one of the primary interpretations of Lenz's law: "the current induced in a circuit due to a change or a motion in a magnetic field is directed so as to exert a mechanical force opposing the motion." There are a number of exclusive features in the interaction between a superconducting coil and a magnet. The discovery of this unique behavioural interaction leads to a principle of developing a new kind of superconducting energy conversion/storage device. With a high-temperature superconducting (HTS) coil and a magnet, this new device is able to complete an energy conversion cycle from mechanical to electromagnetic then to mechanical without need of either a power supply or a motor/generator. Intrinsically, this kind of device has a simple structure, high energy conversion efficiency, high energy storage density, and low operation energy loss. Optimized configuration of the superconductor coil and magnets to enhance the storage capacity and conversion efficiency has been investigated and actualized with theoretical analysis, numerical modelling and experimentation. This article systematically reviews the discovery, the working principle and state of the art of the new energy convertor/storage device as well as its application potentials.
- 21 August 2025
- Published by Universal Wiser Publisher Pte. Ltd in Journal of Electronics and Electrical Engineering
- p. 124-132
Open AccessThe Unique Interaction Behavior Between A Superconductor Coil And A Magnet: A Comprehensive Review
It was found that the interaction between a superconductor coil and a magnet does not comply with one of the primary interpretations of Lenz's law: "the current induced in a circuit due to a change or a motion in a magnetic field is directed so as to exert a mechanical force opposing the motion." There are a number of exclusive features in the interaction between a superconducting coil and a magnet. The discovery of this unique behavioural interaction leads to a principle of developing a new kind of superconducting energy conversion/storage device. With a high-temperature superconducting (HTS) coil and a magnet, this new device is able to complete an energy conversion cycle from mechanical to electromagnetic then to mechanical without need of either a power supply or a motor/generator. Intrinsically, this kind of device has a simple structure, high energy conversion efficiency, high energy storage density, and low operation energy loss. Optimized configuration of the superconductor coil and magnets to enhance the storage capacity and conversion efficiency has been investigated and actualized with theoretical analysis, numerical modelling and experimentation. This article systematically reviews the discovery, the working principle and state of the art of the new energy convertor/storage device as well as its application potentials.
- 7 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-5
Principle, Modeling and Experiment of a New Axial-Type Superconducting Magnetic Bearing With Superconducting Coil
In this paper, we proposed a new axial-type superconducting magnetic bearing (SMB) based on the interaction behavior between a permanent magnet and two closed superconducting coils. Firstly, the principle of the new SMB was presented. Then, the axial restoration characteristic is simulated based on a finite element simulation model. With the simulation results, the optimized parameters for designing the new SMB are obtained. Finally, we built a prototype of the axial SMB and a testing platform for measuring its axial restoring force. The experimental results indicated that the new axial-type SMB has practical axial double-direction stiffness and stability, and may provide an alternative technology for horizontal axle type flywheel energy storage system.
- 7 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-5
Principle, Modeling and Experiment of a New Axial-Type Superconducting Magnetic Bearing With Superconducting Coil
In this paper, we proposed a new axial-type superconducting magnetic bearing (SMB) based on the interaction behavior between a permanent magnet and two closed superconducting coils. Firstly, the principle of the new SMB was presented. Then, the axial restoration characteristic is simulated based on a finite element simulation model. With the simulation results, the optimized parameters for designing the new SMB are obtained. Finally, we built a prototype of the axial SMB and a testing platform for measuring its axial restoring force. The experimental results indicated that the new axial-type SMB has practical axial double-direction stiffness and stability, and may provide an alternative technology for horizontal axle type flywheel energy storage system.
- 27 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (3) , 1-5
Concept of an Auxiliary System for Carrier-Based Aircraft Catapult
In recent years, a new type of superconducting energy storage is proposed based on the interaction of a permanent magnet and a superconducting coil, and many studies on the superconducting energy storage have been conducted. Based on its unique ability of directly realizing energy conversion of mechanical → electromagnetic → mechanical, the new energy storage has promising potential in the applications of utilizing mechanical energy, such as the aircraft catapult. In this paper, we proposed an auxiliary system for the aircraft catapult using the new superconducting energy storage. It works with the conventional aircraft catapult, such as steam catapult and electromagnetic catapult, to realize the catapult capability improvement and energy regeneration. The expected structure and working principle are introduced. The simulation results indicate that a meter-scale auxiliary system can provide propulsion force of average about 100 kN at the beginning of launching, which is significantly helpful. Therefore, we confidently believe that the auxiliary system will greatly enhance the capability of aircraft catapults, both the steam catapult and electromagnetic catapult, which brings a breakthrough in aircraft catapult technology.
- 27 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (3) , 1-5
Concept of an Auxiliary System for Carrier-Based Aircraft Catapult
In recent years, a new type of superconducting energy storage is proposed based on the interaction of a permanent magnet and a superconducting coil, and many studies on the superconducting energy storage have been conducted. Based on its unique ability of directly realizing energy conversion of mechanical → electromagnetic → mechanical, the new energy storage has promising potential in the applications of utilizing mechanical energy, such as the aircraft catapult. In this paper, we proposed an auxiliary system for the aircraft catapult using the new superconducting energy storage. It works with the conventional aircraft catapult, such as steam catapult and electromagnetic catapult, to realize the catapult capability improvement and energy regeneration. The expected structure and working principle are introduced. The simulation results indicate that a meter-scale auxiliary system can provide propulsion force of average about 100 kN at the beginning of launching, which is significantly helpful. Therefore, we confidently believe that the auxiliary system will greatly enhance the capability of aircraft catapults, both the steam catapult and electromagnetic catapult, which brings a breakthrough in aircraft catapult technology.
- 2 February 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (3) , 035911
Comparative study of current carrying capacity between 1G and 2G HTS tape samples at different temperatures and magnetic fields
Two categories of high-temperature superconducting (HTS) tapes, the silver-sheathed BSCCO tape (1G HTS tape) and REBCO coated conductor (2G HTS tape), have been commercialized worldwide and widely used in applications. In this study, the 1G HTS tape produced by Sumitomo and 2G HTS tape produced by Superpower were selected for a systematic comparative study in critical current (I c) performances under various temperature and magnetic field conditions. The anisotropy and I c variation patterns of these two types of samples in the temperature range of 25–77 K, magnetic field from 0 to 7 T and field angle from 0 to 90° were compared and analyzed. The results of this study reveal certain comprehensive characteristic features of these two categories of HTS tapes, supplementing some new systematic information to the literature.
- 2 February 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (3) , 035911
Comparative study of current carrying capacity between 1G and 2G HTS tape samples at different temperatures and magnetic fields
Two categories of high-temperature superconducting (HTS) tapes, the silver-sheathed BSCCO tape (1G HTS tape) and REBCO coated conductor (2G HTS tape), have been commercialized worldwide and widely used in applications. In this study, the 1G HTS tape produced by Sumitomo and 2G HTS tape produced by Superpower were selected for a systematic comparative study in critical current (I c) performances under various temperature and magnetic field conditions. The anisotropy and I c variation patterns of these two types of samples in the temperature range of 25–77 K, magnetic field from 0 to 7 T and field angle from 0 to 90° were compared and analyzed. The results of this study reveal certain comprehensive characteristic features of these two categories of HTS tapes, supplementing some new systematic information to the literature.
- 30 January 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (2) , 025529
Experimental study on AC loss of 1G and 2G HTS coils with an identical structure, geometry and number of turns
Devices made of High Temperature Superconductor (HTS) will suffer AC loss during AC operations, which has unnegligible influence on energy consumption, overall efficiency, cooling cost, and operational stability of the devices. In this study, comparative measurements on 1G and 2G HTS coil samples with an identical structure, geometry, and number of turns were systematically conducted with a calorimetric method at different current values (I rmss) and frequencies (fs). The AC loss characteristics of the HTS samples were analyzed and compared based on the experimental results. The results show that eddy current and coupling play a more dominant role than magnetic hysteresis in the total AC loss of coils made of HTS tapes. The AC loss of both samples increases with I rms and f, but the AC loss is more sensitive to I rms than to f. Under the same conditions, the 1G coil sample has a slightly larger AC loss than the 2G one.
- 30 January 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (2) , 025529
Experimental study on AC loss of 1G and 2G HTS coils with an identical structure, geometry and number of turns
Devices made of High Temperature Superconductor (HTS) will suffer AC loss during AC operations, which has unnegligible influence on energy consumption, overall efficiency, cooling cost, and operational stability of the devices. In this study, comparative measurements on 1G and 2G HTS coil samples with an identical structure, geometry, and number of turns were systematically conducted with a calorimetric method at different current values (I rmss) and frequencies (fs). The AC loss characteristics of the HTS samples were analyzed and compared based on the experimental results. The results show that eddy current and coupling play a more dominant role than magnetic hysteresis in the total AC loss of coils made of HTS tapes. The AC loss of both samples increases with I rms and f, but the AC loss is more sensitive to I rms than to f. Under the same conditions, the 1G coil sample has a slightly larger AC loss than the 2G one.
- 26 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (3) , 1-5
The Study on Propulsion Force Character of an Integrated Operation System for HTS Maglev Train
The high temperature superconductor (HTS) maglev train has several merits in compare with other ones. In our previous work, the feasibility of using electromagnetic guideway (EMG) in HTS maglev trains has been verified and the HTS bulk is proved to gain repulsive force in a reversed magnetic field, which can be used for propulsion function based on EMG in HTS maglev train. In this paper, the repulsive force under different factors are experimented in both EMG unit and segment. With the single EMG unit, the propulsion force under different levitation height, different operation velocities and the hysteresis of propulsion force are discussed. With a 60 cm EMG segment, the periodicity of propulsion forces is discussed and a free propulsion experiment were conducted. The results verify the feasibility of a levitation, guidance and propulsion integrated operation system in HTS maglev train and can support the further development of it.
- 26 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (3) , 1-5
The Study on Propulsion Force Character of an Integrated Operation System for HTS Maglev Train
The high temperature superconductor (HTS) maglev train has several merits in compare with other ones. In our previous work, the feasibility of using electromagnetic guideway (EMG) in HTS maglev trains has been verified and the HTS bulk is proved to gain repulsive force in a reversed magnetic field, which can be used for propulsion function based on EMG in HTS maglev train. In this paper, the repulsive force under different factors are experimented in both EMG unit and segment. With the single EMG unit, the propulsion force under different levitation height, different operation velocities and the hysteresis of propulsion force are discussed. With a 60 cm EMG segment, the periodicity of propulsion forces is discussed and a free propulsion experiment were conducted. The results verify the feasibility of a levitation, guidance and propulsion integrated operation system in HTS maglev train and can support the further development of it.
- 22 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (3) , 1-5
The Interaction Between a High-Temperature Superconducting Coil and In-Series Permanent Magnets
Due to excellent properties of large current-carrying capability and high critical magnetic field, high-temperature superconducting (HTS) materials play an increasingly important role in the field of energy storage. The superconducting magnetic energy storage generally needs power electronic converters to realize the power exchange, where the loss is inevitable. In this paper, the interaction between a closed HTS coil and in-series permanent magnets are investigated, which can realize the efficient storage and release of electromagnetic energy without power electronic converters. The working principle and performance of the proposed structure have been verified through both simulation and experimental tests. The results can provide an insight into constructing high-performance superconducting magnetic energy storage devices.
- 22 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (3) , 1-5
The Interaction Between a High-Temperature Superconducting Coil and In-Series Permanent Magnets
Due to excellent properties of large current-carrying capability and high critical magnetic field, high-temperature superconducting (HTS) materials play an increasingly important role in the field of energy storage. The superconducting magnetic energy storage generally needs power electronic converters to realize the power exchange, where the loss is inevitable. In this paper, the interaction between a closed HTS coil and in-series permanent magnets are investigated, which can realize the efficient storage and release of electromagnetic energy without power electronic converters. The working principle and performance of the proposed structure have been verified through both simulation and experimental tests. The results can provide an insight into constructing high-performance superconducting magnetic energy storage devices.
- 11 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (3) , 1-5
Experiment Studies of a DC Inductive Superconducting Fault Current Limiter With Energy Dissipation Capability
The fast dc fault current-limiting and the fast fault isolation are both necessary technologies in dc power system. In this research, a self-adaptive dc inductive superconducting fault current limiter (SFCL) with energy dissipation capability was proposed, which can restrict dc fault current rising-rate and amplitude at the initial stage of dc fault. At the same time, it can also accelerate the fault isolation speed of dc circuit breaker. The structure and working principle of the proposed SFCL was deeply discussed firstly, the mathematical model at different operation stages was calculated. Then, the dc short-circuit tests were carried out on the experiment platform which consist the SFCL prototype and a dc circuit breaker connected to it. Finally, according to the experiment results, the current-limiting performances of SFCL were detailedly analyzed, including the limitation rate, the fault current cleaning speed, the energy absorption, etc.
- 11 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (3) , 1-5
Experiment Studies of a DC Inductive Superconducting Fault Current Limiter With Energy Dissipation Capability
The fast dc fault current-limiting and the fast fault isolation are both necessary technologies in dc power system. In this research, a self-adaptive dc inductive superconducting fault current limiter (SFCL) with energy dissipation capability was proposed, which can restrict dc fault current rising-rate and amplitude at the initial stage of dc fault. At the same time, it can also accelerate the fault isolation speed of dc circuit breaker. The structure and working principle of the proposed SFCL was deeply discussed firstly, the mathematical model at different operation stages was calculated. Then, the dc short-circuit tests were carried out on the experiment platform which consist the SFCL prototype and a dc circuit breaker connected to it. Finally, according to the experiment results, the current-limiting performances of SFCL were detailedly analyzed, including the limitation rate, the fault current cleaning speed, the energy absorption, etc.
- 22 September 2023
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 36 (11) , 115013
Exploration on the application of a new type of superconducting energy storage for regenerative braking in urban rail transit
Regenerative braking technology has become increasingly attractive due to its ability to recover and reuse the energy that would otherwise be lost. In recent years, a new superconducting energy storage technology is proposed and it has been proved experimentally and analytically that the technology has promising application potential in urban rail transit for regenerative braking. However, a comprehensive assessment of the new technology has not been conducted up to date. In this paper, the currently available energy storage technologies for regenerative braking, such as batteries, supercapacitors, flywheels, and SMES are introduced along with the new superconducting energy storage technology. Comparative studies between the existing technologies and the new one are conducted in terms of energy density, energy conversion efficiency, energy storage duration, capital cost and environmental impact. It is concluded that a regenerative braking system with the new superconducting energy storage has very high cycle efficiency and is superior to the existing energy storage systems. It has the potential to revolutionize the regenerative braking technology and to develop more efficient and sustainable urban rail transportation systems.
- 22 September 2023
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 36 (11) , 115013
Exploration on the application of a new type of superconducting energy storage for regenerative braking in urban rail transit
Regenerative braking technology has become increasingly attractive due to its ability to recover and reuse the energy that would otherwise be lost. In recent years, a new superconducting energy storage technology is proposed and it has been proved experimentally and analytically that the technology has promising application potential in urban rail transit for regenerative braking. However, a comprehensive assessment of the new technology has not been conducted up to date. In this paper, the currently available energy storage technologies for regenerative braking, such as batteries, supercapacitors, flywheels, and SMES are introduced along with the new superconducting energy storage technology. Comparative studies between the existing technologies and the new one are conducted in terms of energy density, energy conversion efficiency, energy storage duration, capital cost and environmental impact. It is concluded that a regenerative braking system with the new superconducting energy storage has very high cycle efficiency and is superior to the existing energy storage systems. It has the potential to revolutionize the regenerative braking technology and to develop more efficient and sustainable urban rail transportation systems.