Anthoula Poulia
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Anthoula Poulia has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Alexander Efstathios Karantzalis
Department of Materials Science and Engineering, University of Ioannina, 45110 Ioannina, Greece
6 shared publications - Emmanuel Georgatis
Department of Materials Science and Engineering, University of Ioannina, 45110 Ioannina, Greece
4 shared publications - Stavros Kiape
Department of Materials Science and Engineering, University of Ioannina, 45110 Ioannina, Greece
4 shared publications - Margarita Ziavra
Department of Materials Science and Engineering, University of Ioannina, 45100 Ioánnina, Greece
2 shared publications - Spyros Kamnis
Computer Science and Biomedical Informatics, University of Thessaly, 35131 Lamia, Greece
2 shared publications - Theodore Matikas
Mechanics, Smart Sensors & Nondestructive Evaluation (MSS-NDE) Laboratory, Department of Materials Science and Engineering, University of Ioannina, GR-45110 Ioannina, Greece
2 shared publications
Latest Publications
- Open Access
Microstructure, Sliding Wear, and Electrochemical Corrosion of a High-Entropy Alloy–Cermet Composite Thermal Spray Coating
This study investigates the design, microstructure, and performance profile of a novel composite coating combining a high-entropy alloy (HEA) matrix with cermet reinforcement. A 50wt.%CoCrFeMnNi0.8V–50wt.% Cr3C2-Ni80Cr20 powder mixture was successfully deposited onto steel substrates via high-velocity oxy-fuel (HVOF) thermal spraying. Microstructural analysis revealed a highly dense, well-bonded coating architecture (450–500 μm thick) where partially melted, spherical HEA splats were uniformly surrounded by the Cr3C2-Ni80Cr20 phase. X-ray diffraction confirmed a complex multiphase evolution consisting of FCC, BCC, and σ-NiCr phases driven by the rapid solidification inherent to the HVOF process. Tribological evaluations via ball-on-disc testing demonstrated that incorporating the Cr3C2-Ni80Cr20 reinforcement significantly improves wear resistance compared to the monolithic HEA coating. The composite’s wear behavior is governed by a synergistic mechanism: the ductile HEA matrix accommodates plastic deformation, while the harder carbide particles enhance load-bearing capacity, transitioning from adhesive wear to mild third-body abrasion and protective tribo-oxidation. Conversely, electrochemical testing in a 3.5 wt.% NaCl solution showed that the composite coating exhibits higher corrosion current densities (10.53 × 10−6 A/cm2) and more active corrosion potentials than the pure HEA matrix. This behavior is attributed to localized micro-galvanic cells forming at the heterogeneous interfaces between the different phases, alongside chloride-induced destabilization of the surface oxide film. Overall, the novel composite coating offers a compelling, sustainable alternative for surface engineering applications requiring a balanced trade-off between mechanical toughness and acceptable environmental durability. This behavior is also verified by the comparison with previous results dealing with monolithic CoCrFeMnNi0.8V and 75wt.%CoCrFeMnNi0.8V–25wt.% Cr3C2-Ni80Cr20 thermal sprayed coatings, where it is evident that the increase of the reinforcing phase leads to an optimum combination of properties.
Open AccessMicrostructure, Sliding Wear, and Electrochemical Corrosion of a High-Entropy Alloy–Cermet Composite Thermal Spray Coating
This study investigates the design, microstructure, and performance profile of a novel composite coating combining a high-entropy alloy (HEA) matrix with cermet reinforcement. A 50wt.%CoCrFeMnNi0.8V–50wt.% Cr3C2-Ni80Cr20 powder mixture was successfully deposited onto steel substrates via high-velocity oxy-fuel (HVOF) thermal spraying. Microstructural analysis revealed a highly dense, well-bonded coating architecture (450–500 μm thick) where partially melted, spherical HEA splats were uniformly surrounded by the Cr3C2-Ni80Cr20 phase. X-ray diffraction confirmed a complex multiphase evolution consisting of FCC, BCC, and σ-NiCr phases driven by the rapid solidification inherent to the HVOF process. Tribological evaluations via ball-on-disc testing demonstrated that incorporating the Cr3C2-Ni80Cr20 reinforcement significantly improves wear resistance compared to the monolithic HEA coating. The composite’s wear behavior is governed by a synergistic mechanism: the ductile HEA matrix accommodates plastic deformation, while the harder carbide particles enhance load-bearing capacity, transitioning from adhesive wear to mild third-body abrasion and protective tribo-oxidation. Conversely, electrochemical testing in a 3.5 wt.% NaCl solution showed that the composite coating exhibits higher corrosion current densities (10.53 × 10−6 A/cm2) and more active corrosion potentials than the pure HEA matrix. This behavior is attributed to localized micro-galvanic cells forming at the heterogeneous interfaces between the different phases, alongside chloride-induced destabilization of the surface oxide film. Overall, the novel composite coating offers a compelling, sustainable alternative for surface engineering applications requiring a balanced trade-off between mechanical toughness and acceptable environmental durability. This behavior is also verified by the comparison with previous results dealing with monolithic CoCrFeMnNi0.8V and 75wt.%CoCrFeMnNi0.8V–25wt.% Cr3C2-Ni80Cr20 thermal sprayed coatings, where it is evident that the increase of the reinforcing phase leads to an optimum combination of properties.
- Open Access
Multi-Phase Evolution and Surface Degradation Kinetics of a Non-Equiatomic (FeCoNiCr)85Ga15 High Entropy Alloy: The Role of Low-Temperature Thermal Activation
This study provides a rigorous analysis of the phase stability, mechanical behavior, and surface integrity of a non-equiatomic (FeCoNiCr)85Ga15 high-entropy alloy (HEA). By transitioning from the conventional equiatomic design to a gallium-doped 3d-transition metal matrix, we explore the interplay between lattice distortion and phase separation. Synthesized via vacuum arc melting, the as-cast alloy exhibits a non-homogeneous dendritic morphology consisting of a Cr-Fe-Co rich face-centered cubic (FCC) matrix and Ni-Ga rich body-centered cubic (BCC) interdendritic regions. While global thermodynamic criteria (δ = 3.65, ΔHmix = −9.28 kJ/mol, and Ω = 2.23) favor single-phase solid solution stability, the Valence Electron Concentration (VEC = 7.46) precisely forecasts this dual-phase structure. Following low-temperature annealing at 250 °C for 24 h, high lattice strain energy drives a significant morphological transformation where the continuous interdendritic network resolves into discrete, phase-separated B2/BCC “islands”. Mechanical and tribological characterizations reveal that this low-temperature thermal activation triggers precipitate hardening; the macro-hardness increases from 146 ± 11 HB to 153 ± 7.5 HB and the micro-hardness rises from 186 ± 4 HV0.5 to 206 ± 17.5 HV0.5, yielding enhanced resistance to oxidation-delamination wear. However, electrochemical evaluation in a 3.5 wt.% NaCl solution highlights a fundamental trade-off: the formation of localized galvanic micro-cells between the phase-separated islands and the matrix causes the corrosion current density (icorr) to increase from ≈10−9 A/cm2 in the as-cast state to ≈10−6 A/cm2 post-heat treatment, accompanied by a heightened susceptibility to localized pitting. These findings elucidate the primary role of electronic structure and minor p-block additions in regulating the lifecycle performance of transition metal HEAs under extreme conditions.
Open AccessMulti-Phase Evolution and Surface Degradation Kinetics of a Non-Equiatomic (FeCoNiCr)85Ga15 High Entropy Alloy: The Role of Low-Temperature Thermal Activation
This study provides a rigorous analysis of the phase stability, mechanical behavior, and surface integrity of a non-equiatomic (FeCoNiCr)85Ga15 high-entropy alloy (HEA). By transitioning from the conventional equiatomic design to a gallium-doped 3d-transition metal matrix, we explore the interplay between lattice distortion and phase separation. Synthesized via vacuum arc melting, the as-cast alloy exhibits a non-homogeneous dendritic morphology consisting of a Cr-Fe-Co rich face-centered cubic (FCC) matrix and Ni-Ga rich body-centered cubic (BCC) interdendritic regions. While global thermodynamic criteria (δ = 3.65, ΔHmix = −9.28 kJ/mol, and Ω = 2.23) favor single-phase solid solution stability, the Valence Electron Concentration (VEC = 7.46) precisely forecasts this dual-phase structure. Following low-temperature annealing at 250 °C for 24 h, high lattice strain energy drives a significant morphological transformation where the continuous interdendritic network resolves into discrete, phase-separated B2/BCC “islands”. Mechanical and tribological characterizations reveal that this low-temperature thermal activation triggers precipitate hardening; the macro-hardness increases from 146 ± 11 HB to 153 ± 7.5 HB and the micro-hardness rises from 186 ± 4 HV0.5 to 206 ± 17.5 HV0.5, yielding enhanced resistance to oxidation-delamination wear. However, electrochemical evaluation in a 3.5 wt.% NaCl solution highlights a fundamental trade-off: the formation of localized galvanic micro-cells between the phase-separated islands and the matrix causes the corrosion current density (icorr) to increase from ≈10−9 A/cm2 in the as-cast state to ≈10−6 A/cm2 post-heat treatment, accompanied by a heightened susceptibility to localized pitting. These findings elucidate the primary role of electronic structure and minor p-block additions in regulating the lifecycle performance of transition metal HEAs under extreme conditions.
- Open Access
Evolution of Microstructural Features and Electrochemical Corrosion Assessment of Ga-Doped CoCrFeNi High-Entropy Alloys: A Comparative Study
This study investigates the microstructural evolution of the CoCrFeNi system after incorporating Gallium (Ga) at varying concentrations (0, 15, and 20 at.%). The systems were synthesized by Vacuum Arc Melting (VAM) and characterized through X-ray Diffraction diffraction (XRD) and Scanning Electron Microscopy (SEM/EDS). Findings showed that the CoCrFeNi medium medium-entropy alloy stabilizes in a single-phase Face-Centered Cubic (FCC) structure. Upon the addition of 15 at.% Ga a dendritic morphology with a transition towards a duplex FCC + BCC microstructure was induced, a trend which was further solified in the equiatomic FeCoNiCrGa system. In this case the proportion of the Ga-rich BCC phase was increased from 18–22% to 31–34% for the Ga15 and Ga20 systems respectively. A combined approach of Electrochemical Frequency Modulation (EFM), Cyclic Potentiodynamic Polarization (CPP), and Electrochemical Impedance Spectroscopy (EIS) was selected for studying the electrochemical corrosion behavior of the produced systems. EFM results indicated a progressive deterioration of corrosion resistance when increasing Ga concentration (Icorr: 4.142, 5.619 and 10.01 μA/cm2, and Rp: 12,035, 10,736 and 7254 Ω for the Ga0, Ga15 and Ga20 alloys respectively). Surface inhomogeneity, rapid passivation, and diffusion-controlled processes caused deviations from the ideal causality factors’ values. CPP measurements revealed increasing corrosion current densities with Ga addition within the Tafel region (2.81 × 10−7, 3.72 × 10−7 and 5.11 × 10−7A/cm2 for the Ga0, Ga15 and Ga20 alloys respectively). All alloys showed positive hysteresis loops and an absence of repassivation, indicating susceptibility to pitting corrosion. Nevertheless, detailed analysis of the forward polarization region highlighted a more complex aspect. Reverse polarization scans confirmed stable pit growth in all alloys, with the absence of a repassivation tendency. EIS tests, performed after the completion of CPP measurements, further clarified the corrosion mechanisms. Equivalent circuit modeling revealed that although Ga-containing alloys exhibited relatively improved film characteristics in the forward polarization stage, the charge transfer resistance (Rct) was highest for the CoCrFeNi alloy, followed by Ga15 and Ga20 (22,620, 11,380, 10,060 Ω respectively). The overall impedance ranking (Ga0 > Ga15 > Ga20, i.e., 27,139 > 20,279.5 > 16,341 ohms respectively) showed that, despite microstructural and entropic effects enhancing certain passivation aspects, the reduced Cr content highly impacted long-term corrosion resistance. This holistic electrochemical approach showcases the complex interactions between compositional alterations, phase structure, grain refinement, passive film chemistry, and diffusion trends in establishing the corrosion performance of Ga-modified CoCrFeNi HEAs.
Open AccessEvolution of Microstructural Features and Electrochemical Corrosion Assessment of Ga-Doped CoCrFeNi High-Entropy Alloys: A Comparative Study
This study investigates the microstructural evolution of the CoCrFeNi system after incorporating Gallium (Ga) at varying concentrations (0, 15, and 20 at.%). The systems were synthesized by Vacuum Arc Melting (VAM) and characterized through X-ray Diffraction diffraction (XRD) and Scanning Electron Microscopy (SEM/EDS). Findings showed that the CoCrFeNi medium medium-entropy alloy stabilizes in a single-phase Face-Centered Cubic (FCC) structure. Upon the addition of 15 at.% Ga a dendritic morphology with a transition towards a duplex FCC + BCC microstructure was induced, a trend which was further solified in the equiatomic FeCoNiCrGa system. In this case the proportion of the Ga-rich BCC phase was increased from 18–22% to 31–34% for the Ga15 and Ga20 systems respectively. A combined approach of Electrochemical Frequency Modulation (EFM), Cyclic Potentiodynamic Polarization (CPP), and Electrochemical Impedance Spectroscopy (EIS) was selected for studying the electrochemical corrosion behavior of the produced systems. EFM results indicated a progressive deterioration of corrosion resistance when increasing Ga concentration (Icorr: 4.142, 5.619 and 10.01 μA/cm2, and Rp: 12,035, 10,736 and 7254 Ω for the Ga0, Ga15 and Ga20 alloys respectively). Surface inhomogeneity, rapid passivation, and diffusion-controlled processes caused deviations from the ideal causality factors’ values. CPP measurements revealed increasing corrosion current densities with Ga addition within the Tafel region (2.81 × 10−7, 3.72 × 10−7 and 5.11 × 10−7A/cm2 for the Ga0, Ga15 and Ga20 alloys respectively). All alloys showed positive hysteresis loops and an absence of repassivation, indicating susceptibility to pitting corrosion. Nevertheless, detailed analysis of the forward polarization region highlighted a more complex aspect. Reverse polarization scans confirmed stable pit growth in all alloys, with the absence of a repassivation tendency. EIS tests, performed after the completion of CPP measurements, further clarified the corrosion mechanisms. Equivalent circuit modeling revealed that although Ga-containing alloys exhibited relatively improved film characteristics in the forward polarization stage, the charge transfer resistance (Rct) was highest for the CoCrFeNi alloy, followed by Ga15 and Ga20 (22,620, 11,380, 10,060 Ω respectively). The overall impedance ranking (Ga0 > Ga15 > Ga20, i.e., 27,139 > 20,279.5 > 16,341 ohms respectively) showed that, despite microstructural and entropic effects enhancing certain passivation aspects, the reduced Cr content highly impacted long-term corrosion resistance. This holistic electrochemical approach showcases the complex interactions between compositional alterations, phase structure, grain refinement, passive film chemistry, and diffusion trends in establishing the corrosion performance of Ga-modified CoCrFeNi HEAs.
- Open Access
Microstructural Observations, Mechanical Hierarchy, and Tribological Performance in CrFeMoV-Alx High-Entropy Alloys
This work investigates the synthesis, thermodynamic phase stability and microstructural, mechanical and tribological behavior of the CrFeMoV alloy system and its Al-modified derivatives, CrFeMoV-Al2 and CrFeMoV-Al6, which belong to the family of high- and medium-entropy alloys. The studied systems were produced via Vacuum Arc Melting (VAM), followed by a comprehensive characterization. Thermodynamic and geometric phase-formation models were employed to predict the formation of BCC/Β2 solid solutions and the potential emergence of σ-type intermetallic compounds. An ML model was also employed to further predict elemental interactions and phase evolution. These predictions were experimentally confirmed via X-ray diffraction analysis, which verified the presence of a BCC matrix in all compositions, the presence of σ-phase precipitates whose volume fraction systematically reduced with Al inclusion and the gradual increase in the B2 phase with the increase in the Al content. Scanning electron microscopy and EDX analyses uncovered noticeable dendritic segregation, with Mo and Fe enrichment in dendrite cores and in interdendritic regions, respectively. Cr, V, and Al were more uniformly distributed. Mechanical property data derived by micro hardness testing demonstrated a high hardness of 816 HV for the base alloy, ascribed to σ-phase strengthening, followed by a progressive reduction in this value to 802 HV and 756 HV in Al-containing alloys due to the attenuation of σ-phase formation and the gradual increase in the B2 phase. Dry sliding wear results unveiled a positive correlation between wear resistance and hardness, confirming the beneficial role of intermetallic strengthening. Finally, nanoindentation tests shed light on the nanoscale mechanical response, confirming the trends observed at the microscale. Overall, the combination of thermodynamic modeling and experimental analysis provide a robust framework for understanding phase stability, microstructural evolution, and mechanical performance in Al-alloyed CrFeMoV high-entropy systems, while highlighting the potential of controlled Al additions to tailor microstructure and properties.
Open AccessMicrostructural Observations, Mechanical Hierarchy, and Tribological Performance in CrFeMoV-Alx High-Entropy Alloys
This work investigates the synthesis, thermodynamic phase stability and microstructural, mechanical and tribological behavior of the CrFeMoV alloy system and its Al-modified derivatives, CrFeMoV-Al2 and CrFeMoV-Al6, which belong to the family of high- and medium-entropy alloys. The studied systems were produced via Vacuum Arc Melting (VAM), followed by a comprehensive characterization. Thermodynamic and geometric phase-formation models were employed to predict the formation of BCC/Β2 solid solutions and the potential emergence of σ-type intermetallic compounds. An ML model was also employed to further predict elemental interactions and phase evolution. These predictions were experimentally confirmed via X-ray diffraction analysis, which verified the presence of a BCC matrix in all compositions, the presence of σ-phase precipitates whose volume fraction systematically reduced with Al inclusion and the gradual increase in the B2 phase with the increase in the Al content. Scanning electron microscopy and EDX analyses uncovered noticeable dendritic segregation, with Mo and Fe enrichment in dendrite cores and in interdendritic regions, respectively. Cr, V, and Al were more uniformly distributed. Mechanical property data derived by micro hardness testing demonstrated a high hardness of 816 HV for the base alloy, ascribed to σ-phase strengthening, followed by a progressive reduction in this value to 802 HV and 756 HV in Al-containing alloys due to the attenuation of σ-phase formation and the gradual increase in the B2 phase. Dry sliding wear results unveiled a positive correlation between wear resistance and hardness, confirming the beneficial role of intermetallic strengthening. Finally, nanoindentation tests shed light on the nanoscale mechanical response, confirming the trends observed at the microscale. Overall, the combination of thermodynamic modeling and experimental analysis provide a robust framework for understanding phase stability, microstructural evolution, and mechanical performance in Al-alloyed CrFeMoV high-entropy systems, while highlighting the potential of controlled Al additions to tailor microstructure and properties.
- Top Cited PapersOpen Access
Latest Advancements and Mechanistic Insights into High-Entropy Alloys: Design, Properties and Applications
High-entropy alloys (HEAs) are a class of multi-principal element materials composed of five or more elements in near-equimolar ratios. This unique compositional design generates high configurational entropy, which stabilizes simple solid solution phases and reduces the tendency for intermetallic compound formation. Unlike conventional alloys, HEAs exhibit a combination of properties that are often mutually exclusive, such as high strength and ductility, excellent thermal stability, superior corrosion and oxidation resistance. The exceptional mechanical performance of HEAs is attributed to mechanisms including lattice distortion strengthening, sluggish diffusion, and multiple active deformation pathways such as dislocation slip, twinning, and phase transformation. Advanced characterization techniques such as transmission electron microscopy (TEM), atom probe tomography (APT), and in situ mechanical testing have revealed the complex interplay between microstructure and properties. Computational approaches, including CALPHAD modeling, density functional theory (DFT), and machine learning, have significantly accelerated HEA design, allowing prediction of phase stability, mechanical behavior, and environmental resistance. Representative examples include the FCC-structured CoCrFeMnNi alloy, known for its exceptional cryogenic toughness, Al-containing dual-phase HEAs, such as AlCoCrFeNi, which exhibit high hardness and moderate ductility and refractory HEAs, such as NbMoTaW, which maintain ultra-high strength at temperatures above 1200 °C. Despite these advances, challenges remain in controlling microstructural homogeneity, understanding long-term environmental stability, and developing cost-effective manufacturing routes. This review provides a comprehensive and analytical study of recent progress in HEA research (focusing on literature from 2022–2025), covering thermodynamic fundamentals, design strategies, processing techniques, mechanical and chemical properties, and emerging applications, through highlighting opportunities and directions for future research. In summary, the review’s unique contribution lies in offering an up-to-date, mechanistically grounded, and computationally informed study on the HEAs research-linking composition, processing, structure, and properties to guide the next phase of alloy design and application.
Top Cited PapersOpen AccessLatest Advancements and Mechanistic Insights into High-Entropy Alloys: Design, Properties and Applications
High-entropy alloys (HEAs) are a class of multi-principal element materials composed of five or more elements in near-equimolar ratios. This unique compositional design generates high configurational entropy, which stabilizes simple solid solution phases and reduces the tendency for intermetallic compound formation. Unlike conventional alloys, HEAs exhibit a combination of properties that are often mutually exclusive, such as high strength and ductility, excellent thermal stability, superior corrosion and oxidation resistance. The exceptional mechanical performance of HEAs is attributed to mechanisms including lattice distortion strengthening, sluggish diffusion, and multiple active deformation pathways such as dislocation slip, twinning, and phase transformation. Advanced characterization techniques such as transmission electron microscopy (TEM), atom probe tomography (APT), and in situ mechanical testing have revealed the complex interplay between microstructure and properties. Computational approaches, including CALPHAD modeling, density functional theory (DFT), and machine learning, have significantly accelerated HEA design, allowing prediction of phase stability, mechanical behavior, and environmental resistance. Representative examples include the FCC-structured CoCrFeMnNi alloy, known for its exceptional cryogenic toughness, Al-containing dual-phase HEAs, such as AlCoCrFeNi, which exhibit high hardness and moderate ductility and refractory HEAs, such as NbMoTaW, which maintain ultra-high strength at temperatures above 1200 °C. Despite these advances, challenges remain in controlling microstructural homogeneity, understanding long-term environmental stability, and developing cost-effective manufacturing routes. This review provides a comprehensive and analytical study of recent progress in HEA research (focusing on literature from 2022–2025), covering thermodynamic fundamentals, design strategies, processing techniques, mechanical and chemical properties, and emerging applications, through highlighting opportunities and directions for future research. In summary, the review’s unique contribution lies in offering an up-to-date, mechanistically grounded, and computationally informed study on the HEAs research-linking composition, processing, structure, and properties to guide the next phase of alloy design and application.
- Open Access
- 1 December 2025
- Published by MDPI AG in Preprints.org
Latest Advancements and Mechanistic Insights into High-Entropy Alloys: Design, Properties and Applications
High-entropy alloys (HEAs) are a class of multi-principal element materials composed of five or more elements in near-equimolar ratios. This unique compositional design generates high configurational entropy, which stabilizes simple solid solution phases and reduces the tendency for intermetallic compound formation. Unlike conventional alloys, HEAs exhibit a combination of properties that are often mutually exclusive, such as high strength and ductility, excellent thermal stability, superior corrosion and oxidation resistance. The exceptional mechanical performance of HEAs is attributed to mechanisms including lattice distortion strengthening, sluggish diffusion, and multiple active deformation pathways such as dislocation slip, twinning, and phase transformation. Advanced characterization techniques such as transmission electron microscopy (TEM), atom probe tomography (APT), and in-situ mechanical testing have revealed the complex interplay between microstructure and properties. Computational approaches, including CALPHAD modeling, density functional theory (DFT), and machine learning, have significantly accelerated HEA design, allowing prediction of phase stability, mechanical behavior, and environmental resistance. Representative examples include the FCC-structured CoCrFeMnNi alloy, known for its exceptional cryogenic toughness, Al-containing dual-phase HEAs, such as AlCoCrFeNi, which exhibit high hardness and moderate ductility and refractory HEAs, such as NbMoTaW, which maintain ultra-high strength at temperatures above 1200°C. Despite these advances, challenges remain in controlling microstructural homogeneity, understanding long-term environmental stability, and developing cost-effective manufacturing routes. This review provides a comprehensive and analytical study of recent progress in HEA research (focusing on literature from 2022–2025), covering thermodynamic fundamentals, design strategies, processing techniques, mechanical and chemical properties, and emerging applications, through highlighting opportunities and directions for future research. In summary, the review’s unique contribution lies in offering an up-to-date, mechanistically grounded, and computationally informed study on the HEAs research-linking composition, processing, structure, and properties to guide the next phase of alloy design and application.
- 1 December 2025
- Published by MDPI AG in Preprints.org
Open AccessLatest Advancements and Mechanistic Insights into High-Entropy Alloys: Design, Properties and Applications
High-entropy alloys (HEAs) are a class of multi-principal element materials composed of five or more elements in near-equimolar ratios. This unique compositional design generates high configurational entropy, which stabilizes simple solid solution phases and reduces the tendency for intermetallic compound formation. Unlike conventional alloys, HEAs exhibit a combination of properties that are often mutually exclusive, such as high strength and ductility, excellent thermal stability, superior corrosion and oxidation resistance. The exceptional mechanical performance of HEAs is attributed to mechanisms including lattice distortion strengthening, sluggish diffusion, and multiple active deformation pathways such as dislocation slip, twinning, and phase transformation. Advanced characterization techniques such as transmission electron microscopy (TEM), atom probe tomography (APT), and in-situ mechanical testing have revealed the complex interplay between microstructure and properties. Computational approaches, including CALPHAD modeling, density functional theory (DFT), and machine learning, have significantly accelerated HEA design, allowing prediction of phase stability, mechanical behavior, and environmental resistance. Representative examples include the FCC-structured CoCrFeMnNi alloy, known for its exceptional cryogenic toughness, Al-containing dual-phase HEAs, such as AlCoCrFeNi, which exhibit high hardness and moderate ductility and refractory HEAs, such as NbMoTaW, which maintain ultra-high strength at temperatures above 1200°C. Despite these advances, challenges remain in controlling microstructural homogeneity, understanding long-term environmental stability, and developing cost-effective manufacturing routes. This review provides a comprehensive and analytical study of recent progress in HEA research (focusing on literature from 2022–2025), covering thermodynamic fundamentals, design strategies, processing techniques, mechanical and chemical properties, and emerging applications, through highlighting opportunities and directions for future research. In summary, the review’s unique contribution lies in offering an up-to-date, mechanistically grounded, and computationally informed study on the HEAs research-linking composition, processing, structure, and properties to guide the next phase of alloy design and application.
- 1 August 2019
- Published by International Information and Engineering Technology Association in Annales de Chimie - Science des Matériaux
- Vol. 43 (4) , 199-205
Electrochemical Study of MoTaNbVTi High Entropy Alloy in Aqueous Environments
- 1 August 2019
- Published by International Information and Engineering Technology Association in Annales de Chimie - Science des Matériaux
- Vol. 43 (4) , 199-205
Electrochemical Study of MoTaNbVTi High Entropy Alloy in Aqueous Environments