Spyros Kamnis
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Spyros Kamnis has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Alexander Efstathios Karantzalis
Department of Materials Science and Engineering, University of Ioannina, 45110 Ioannina, Greece
2 shared publications - Anthoula Poulia
Department of Materials Science and Engineering, University of Ioannina, 45110 Ioannina, Greece
2 shared publications - Emmanuel Georgatis
Department of Materials Science and Engineering, University of Ioannina, 45110 Ioannina, Greece
2 shared publications - Stavros Kiape
Department of Materials Science and Engineering, University of Ioannina, 45110 Ioannina, Greece
2 shared publications - Christina Mathiou
Department of Materials Science and Engineering, University of Ioannina, 45110 Ioannina, Greece
1 shared publication - Dimitrios Nousias
Department of Materials Science and Engineering, University of Ioannina, 45110 Ioannina, Greece
1 shared publication
Latest Publications
- Open Access
Microstructure, Sliding Wear, and Electrochemical Corrosion of a High-Entropy Alloy–Cermet Composite Thermal Spray Coating
This study investigates the design, microstructure, and performance profile of a novel composite coating combining a high-entropy alloy (HEA) matrix with cermet reinforcement. A 50wt.%CoCrFeMnNi0.8V–50wt.% Cr3C2-Ni80Cr20 powder mixture was successfully deposited onto steel substrates via high-velocity oxy-fuel (HVOF) thermal spraying. Microstructural analysis revealed a highly dense, well-bonded coating architecture (450–500 μm thick) where partially melted, spherical HEA splats were uniformly surrounded by the Cr3C2-Ni80Cr20 phase. X-ray diffraction confirmed a complex multiphase evolution consisting of FCC, BCC, and σ-NiCr phases driven by the rapid solidification inherent to the HVOF process. Tribological evaluations via ball-on-disc testing demonstrated that incorporating the Cr3C2-Ni80Cr20 reinforcement significantly improves wear resistance compared to the monolithic HEA coating. The composite’s wear behavior is governed by a synergistic mechanism: the ductile HEA matrix accommodates plastic deformation, while the harder carbide particles enhance load-bearing capacity, transitioning from adhesive wear to mild third-body abrasion and protective tribo-oxidation. Conversely, electrochemical testing in a 3.5 wt.% NaCl solution showed that the composite coating exhibits higher corrosion current densities (10.53 × 10−6 A/cm2) and more active corrosion potentials than the pure HEA matrix. This behavior is attributed to localized micro-galvanic cells forming at the heterogeneous interfaces between the different phases, alongside chloride-induced destabilization of the surface oxide film. Overall, the novel composite coating offers a compelling, sustainable alternative for surface engineering applications requiring a balanced trade-off between mechanical toughness and acceptable environmental durability. This behavior is also verified by the comparison with previous results dealing with monolithic CoCrFeMnNi0.8V and 75wt.%CoCrFeMnNi0.8V–25wt.% Cr3C2-Ni80Cr20 thermal sprayed coatings, where it is evident that the increase of the reinforcing phase leads to an optimum combination of properties.
Open AccessMicrostructure, Sliding Wear, and Electrochemical Corrosion of a High-Entropy Alloy–Cermet Composite Thermal Spray Coating
This study investigates the design, microstructure, and performance profile of a novel composite coating combining a high-entropy alloy (HEA) matrix with cermet reinforcement. A 50wt.%CoCrFeMnNi0.8V–50wt.% Cr3C2-Ni80Cr20 powder mixture was successfully deposited onto steel substrates via high-velocity oxy-fuel (HVOF) thermal spraying. Microstructural analysis revealed a highly dense, well-bonded coating architecture (450–500 μm thick) where partially melted, spherical HEA splats were uniformly surrounded by the Cr3C2-Ni80Cr20 phase. X-ray diffraction confirmed a complex multiphase evolution consisting of FCC, BCC, and σ-NiCr phases driven by the rapid solidification inherent to the HVOF process. Tribological evaluations via ball-on-disc testing demonstrated that incorporating the Cr3C2-Ni80Cr20 reinforcement significantly improves wear resistance compared to the monolithic HEA coating. The composite’s wear behavior is governed by a synergistic mechanism: the ductile HEA matrix accommodates plastic deformation, while the harder carbide particles enhance load-bearing capacity, transitioning from adhesive wear to mild third-body abrasion and protective tribo-oxidation. Conversely, electrochemical testing in a 3.5 wt.% NaCl solution showed that the composite coating exhibits higher corrosion current densities (10.53 × 10−6 A/cm2) and more active corrosion potentials than the pure HEA matrix. This behavior is attributed to localized micro-galvanic cells forming at the heterogeneous interfaces between the different phases, alongside chloride-induced destabilization of the surface oxide film. Overall, the novel composite coating offers a compelling, sustainable alternative for surface engineering applications requiring a balanced trade-off between mechanical toughness and acceptable environmental durability. This behavior is also verified by the comparison with previous results dealing with monolithic CoCrFeMnNi0.8V and 75wt.%CoCrFeMnNi0.8V–25wt.% Cr3C2-Ni80Cr20 thermal sprayed coatings, where it is evident that the increase of the reinforcing phase leads to an optimum combination of properties.
- Open Access
AI-Assisted Screening of Oral Reading in Primary School: Using Short Recordings to Flag Reading Difficulty in Greek Pupils
Early identification of reading difficulties enables timely classroom intervention; however, teachers often have limited time and restricted access to specialist assessment. This study explores a brief, teacher-friendly screening approach based on short oral reading recordings to support classroom decision-making. Oral reading samples were collected from 77 Greek primary school pupils (Grades 3–6) during a standardized reading task. Recordings were segmented into 7 s excerpts, converted into spectrogram images, and analyzed using a deep learning model to classify each excerpt as indicative of reading difficulties or not. To reflect realistic school implementation, model development followed an 80/20 participant-level split, with validation conducted on pupils not included in the training set. At the selected operating threshold, the model achieved approximately 84% overall accuracy and a balanced accuracy of 0.85. For practical applicability, a pupil-level indicator—representing the proportion of excerpts flagged as difficult—showed a strong association with expert judgments (r ≈ 0.74). These findings suggest that brief oral reading recordings can provide teachers with an interpretable screening signal to inform monitoring, prioritization, and early classroom support while underscoring the need for further validation under routine school conditions.
Open AccessAI-Assisted Screening of Oral Reading in Primary School: Using Short Recordings to Flag Reading Difficulty in Greek Pupils
Early identification of reading difficulties enables timely classroom intervention; however, teachers often have limited time and restricted access to specialist assessment. This study explores a brief, teacher-friendly screening approach based on short oral reading recordings to support classroom decision-making. Oral reading samples were collected from 77 Greek primary school pupils (Grades 3–6) during a standardized reading task. Recordings were segmented into 7 s excerpts, converted into spectrogram images, and analyzed using a deep learning model to classify each excerpt as indicative of reading difficulties or not. To reflect realistic school implementation, model development followed an 80/20 participant-level split, with validation conducted on pupils not included in the training set. At the selected operating threshold, the model achieved approximately 84% overall accuracy and a balanced accuracy of 0.85. For practical applicability, a pupil-level indicator—representing the proportion of excerpts flagged as difficult—showed a strong association with expert judgments (r ≈ 0.74). These findings suggest that brief oral reading recordings can provide teachers with an interpretable screening signal to inform monitoring, prioritization, and early classroom support while underscoring the need for further validation under routine school conditions.
- Open Access
Microstructural Observations, Mechanical Hierarchy, and Tribological Performance in CrFeMoV-Alx High-Entropy Alloys
This work investigates the synthesis, thermodynamic phase stability and microstructural, mechanical and tribological behavior of the CrFeMoV alloy system and its Al-modified derivatives, CrFeMoV-Al2 and CrFeMoV-Al6, which belong to the family of high- and medium-entropy alloys. The studied systems were produced via Vacuum Arc Melting (VAM), followed by a comprehensive characterization. Thermodynamic and geometric phase-formation models were employed to predict the formation of BCC/Β2 solid solutions and the potential emergence of σ-type intermetallic compounds. An ML model was also employed to further predict elemental interactions and phase evolution. These predictions were experimentally confirmed via X-ray diffraction analysis, which verified the presence of a BCC matrix in all compositions, the presence of σ-phase precipitates whose volume fraction systematically reduced with Al inclusion and the gradual increase in the B2 phase with the increase in the Al content. Scanning electron microscopy and EDX analyses uncovered noticeable dendritic segregation, with Mo and Fe enrichment in dendrite cores and in interdendritic regions, respectively. Cr, V, and Al were more uniformly distributed. Mechanical property data derived by micro hardness testing demonstrated a high hardness of 816 HV for the base alloy, ascribed to σ-phase strengthening, followed by a progressive reduction in this value to 802 HV and 756 HV in Al-containing alloys due to the attenuation of σ-phase formation and the gradual increase in the B2 phase. Dry sliding wear results unveiled a positive correlation between wear resistance and hardness, confirming the beneficial role of intermetallic strengthening. Finally, nanoindentation tests shed light on the nanoscale mechanical response, confirming the trends observed at the microscale. Overall, the combination of thermodynamic modeling and experimental analysis provide a robust framework for understanding phase stability, microstructural evolution, and mechanical performance in Al-alloyed CrFeMoV high-entropy systems, while highlighting the potential of controlled Al additions to tailor microstructure and properties.
Open AccessMicrostructural Observations, Mechanical Hierarchy, and Tribological Performance in CrFeMoV-Alx High-Entropy Alloys
This work investigates the synthesis, thermodynamic phase stability and microstructural, mechanical and tribological behavior of the CrFeMoV alloy system and its Al-modified derivatives, CrFeMoV-Al2 and CrFeMoV-Al6, which belong to the family of high- and medium-entropy alloys. The studied systems were produced via Vacuum Arc Melting (VAM), followed by a comprehensive characterization. Thermodynamic and geometric phase-formation models were employed to predict the formation of BCC/Β2 solid solutions and the potential emergence of σ-type intermetallic compounds. An ML model was also employed to further predict elemental interactions and phase evolution. These predictions were experimentally confirmed via X-ray diffraction analysis, which verified the presence of a BCC matrix in all compositions, the presence of σ-phase precipitates whose volume fraction systematically reduced with Al inclusion and the gradual increase in the B2 phase with the increase in the Al content. Scanning electron microscopy and EDX analyses uncovered noticeable dendritic segregation, with Mo and Fe enrichment in dendrite cores and in interdendritic regions, respectively. Cr, V, and Al were more uniformly distributed. Mechanical property data derived by micro hardness testing demonstrated a high hardness of 816 HV for the base alloy, ascribed to σ-phase strengthening, followed by a progressive reduction in this value to 802 HV and 756 HV in Al-containing alloys due to the attenuation of σ-phase formation and the gradual increase in the B2 phase. Dry sliding wear results unveiled a positive correlation between wear resistance and hardness, confirming the beneficial role of intermetallic strengthening. Finally, nanoindentation tests shed light on the nanoscale mechanical response, confirming the trends observed at the microscale. Overall, the combination of thermodynamic modeling and experimental analysis provide a robust framework for understanding phase stability, microstructural evolution, and mechanical performance in Al-alloyed CrFeMoV high-entropy systems, while highlighting the potential of controlled Al additions to tailor microstructure and properties.
- Open Access
- 7 April 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-19
High entropy alloy property predictions using a transformer-based language model
This study introduces a language transformer-based machine learning model to predict key mechanical properties of high-entropy alloys (HEAs), addressing the challenges due to their complex, multi-principal element compositions and limited experimental data. By pre-training the transformer on extensive synthetic materials data and fine-tuning it with specific HEA datasets, the model effectively captures intricate elemental interactions through self-attention mechanisms. This approach mitigates data scarcity issues via transfer learning, enhancing predictive accuracy for properties like elongation (%) and ultimate tensile strength compared to traditional regression models such as random forests and Gaussian processes. The model’s interpretability is enhanced by visualizing attention weights, revealing significant elemental relationships that align with known metallurgical principles. This work demonstrates the potential of transformer models to accelerate materials discovery and optimization, enabling accurate property predictions, thereby advancing the field of materials informatics. To fully realize the model’s potential in practical applications, future studies should incorporate more advanced preprocessing methods, realistic constraints during synthetic dataset generation, and more refined tokenization techniques.
- 7 April 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-19
Open AccessHigh entropy alloy property predictions using a transformer-based language model
This study introduces a language transformer-based machine learning model to predict key mechanical properties of high-entropy alloys (HEAs), addressing the challenges due to their complex, multi-principal element compositions and limited experimental data. By pre-training the transformer on extensive synthetic materials data and fine-tuning it with specific HEA datasets, the model effectively captures intricate elemental interactions through self-attention mechanisms. This approach mitigates data scarcity issues via transfer learning, enhancing predictive accuracy for properties like elongation (%) and ultimate tensile strength compared to traditional regression models such as random forests and Gaussian processes. The model’s interpretability is enhanced by visualizing attention weights, revealing significant elemental relationships that align with known metallurgical principles. This work demonstrates the potential of transformer models to accelerate materials discovery and optimization, enabling accurate property predictions, thereby advancing the field of materials informatics. To fully realize the model’s potential in practical applications, future studies should incorporate more advanced preprocessing methods, realistic constraints during synthetic dataset generation, and more refined tokenization techniques.