VSVladimir A. Syasko

Vladimir A. Syasko

*This is an algorithmically generated author record based on publicly available information.

Vladimir A. Syasko has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Rolled Waterproofing Coating Delamination Detection by High-Voltage Testing

    by Vladimir Syasko, Alexey Musikhin, Igor Gnivush, Maria Stepanova, Anna Vinogradova

    This study assesses the possibility of identifying non-through defects in dielectric coatings, specifically interfacial defects located at the metal–coating boundary, by means of high-voltage non-destructive testing. It is demonstrated that partial discharges causing characteristic distortions of the applied test-voltage pulse can be used as a reliable diagnostic feature of such defects. Using an equivalent capacitive representation of a defective coating, a relationship is established between the apparent charge and the geometry of the air-filled gap. The proposed approach is supported by COMSOL simulations of the electric-field distribution and by experiments performed on Plexiglas specimens containing blind holes of different depths. In addition, a method is developed for isolating the partial-discharge signal based on a weighted sum of increments in the root-mean-square deviations of the second derivative of the voltage waveform. The resulting relationships enable estimation of the residual coating thickness in the defect region.


  • Open Access

    Determination of core body temperature during pre-shift medical examination

    by V. V. Savchenko, V. A. Syasko

    The purpose of the research is to develop a method for indirect assessment of core body temperature based on measurements of heart rate and palm temperature using a technical equipment kit during a complex visual-motor reaction test. Methods. During the development process, a series of examinations were conducted with sequential measurements of CBT using a medical thermometer and the TEK employed in the proposed measurement method. The obtained measurement results were processed using regression analysis, and based on the derived generalizations, a dataset was synthesized for training a machine learning regression model using the "random forest" algorithm. The developed measurement method was verified in accordance with the requirements for CBT assessment during pre-shift medical examinations. Results. As a result of the conducted research and the identified parameters (data preprocessing, data synthesis and the regression model algorithm), a technique for indirect assessment of CTT was developed, and its accuracy characteristics were determined. Conclusion. The developed method complies with the regulatory requirements for CBT measurement during pre-shift medical examinations. The method is applicable within an ambient temperature range of 18 to 35°C, measures CBT in the range of 35 to 42°C, and has an absolute measurement error of ±0.1°C. The method has been certified and registered by the Federal Agency for Technical Regulation and Metrology (Rosstandart). The certification number for the measurement method is 2207/2411-(RA.RU.310494)-2023, and the registry entry number is FR.1.32.2024.47935. Based on this method, specialized software (SSW) "Functional State Assessment" was developed. The SSW is registered with the Federal Service for Intellectual Property (Rospatent) and included in the register of computer programs. The state registration number for the computer program is 2024612210. The SSW, developed in accordance with the proposed method, is used in a hardware-software complex designed for conducting pre-shift medical examinations.

  • Open Access

    Methods and Means of Eddy Current Testing of Soldered Lap Joints of Electrical Machines

    by Anton Gorbunov, Vladimir Syasko, Pavel Solomenchuk, Alexander Umanskii

    This article is devoted to the non-destructive testing of the soldering integrity of soldered lap joints of the current-carrying busbars in electrical machines’ stator windings. The design of a two-element eddy current probe with tangentially positioned coils and active shielding for measuring the soldering integrity of soldered lap joints is developed. This paper considers the method of suppressing the influence of stray parameters on the testing results and the method of correcting the measurements in the case of a deviation in the electrical conductivity of the conductive busbar material. The test results demonstrate the performance of the developed eddy current probe for determining the actual value of the soldering integrity of soldered lap joints in the range of 0–100% with a permissible relative error of no more than 5%.


  • Ensuring the reliability of automated pulse electric spark control of pipe coatings in in-line production

    by D. I. Antonov, M. S. Stepanova, A. S. Musikhin, V. A. Syasko, K. A. Tomsky

    The issues of ensuring the reliability of automated electric spark testing of the continuity of dielectric coatings on metal pipes with diameters up to 1.5 meters in the context of in-line manufacturing are addressed. A simulation of the “high-voltage pulse source – electrode – dielectric coating – metal substrate” system has been conducted. Experimental studies have been conducted to evaluate the load capacity and voltage stability of the Corona 2.2 holiday detector using an improved generator at high capacitive loads.


  • Open Access

    Multi-Parameter Complex Control of Metal Coatings on Ball Plugs of Pipeline Shut-Off Valves

    by Varvara Alekhnovich, Vladimir Syasko, Alexander Umanskii

    The greatest losses during gas transportation occur in the elements of shut-off valves, the operating parameters of which, among other things, depend on the thickness and hardness of the protective coating of the ball plugs. The study of the parameters of nickel–phosphorus and chrome coatings on ball plugs of serially produced shut-off valves, including control of their thickness and hardness, was carried out. Based on the test results, deviations in the actual parameters of coatings from the requirements of technological documentation were revealed, the necessity of their complex control was substantiated, recommendations on the choice of methods and equipment were formulated, and the main provisions of the test methodology were developed.


  • Modeling Defects in Ultrasonic Nondestructive Testing: State-of-the-Art and Prospects

    by L. Yu. Mogilner, V. A. Syasko, A. I. Shikhov

    In the introduction to the article we mention four factors that are most important for ensuring the accuracy of characterizing defects during ultrasonic inspection, viz., parameters of artificial reflectors in samples, compliance of the acoustic properties of the material of tuning samples and tested products, transient characteristics of electroacoustic paths, and methodological features of measurements. The present article is devoted to the analysis of the first and partly fourth of listed factors. The review of reflectors, the use of which is regulated in various standards, is carried out. Advantages and disadvantages of flat-bottomed holes, segmental and corner reflectors (“notches”), lateral (SDH) and vertical cylindrical holes, and grooves are noted. Taking into account the specific features of ultrasonic wave scattering, it is noted that artificial “reflectors” such as “grooves” and SDHs are used to adjust the parameters of modern diffraction testing methods. It is recommended to expand the use of grooves, SDHs, and vertical drilling when revising the standards governing the use of conventional echo methods. The estimation of accuracy of measurement of defects parameters, first of all, the crack tip coordinates, with application of modern digital methods of information processing during ultrasonic testing is given. It is indicated that to increase the measurement accuracy and to determine the position and orientation of cracks in welds, it is necessary to create a database of digital twins of samples with artificial reflectors and products with real defects. A general scheme of executing the quality control is given that takes into account the use of standards (measures), digital models of artificial reflectors, and digital twins of the testing process to ensure the necessary detectability of defects and reliability of manual, automated, and, potentially, automatic testing.


  • Open Access

    Improvement of Methods and Devices for Multi-Parameter High-Voltage Testing of Dielectric Coatings

    by Vladimir Syasko, Alexey Musikhin, Igor Gnivush

    Currently, the high voltage testing method is widely used to detect pinholes and porosity defects in dielectric coatings. However, most modern coatings also have requirements for the minimum allowable coating thickness. Conducting tolerance tests on the thickness of dielectric coatings concurrently along with monitoring integrity within a single technological process appears promising. Additionally, mitigating the impact of various interfering parameters is crucial. This paper conducts a theoretical and experimental examination of spark formation processes in both gas and dielectrics. This analysis takes place during the identification of both through and non-through defects in dielectric coatings on conductive substrates. The principles of selecting the test voltage for the investigated dielectric coatings, considering the need to detect both through defects and inadmissible thinning, are theoretically and experimentally justified. It is suggested to utilize a probabilistic approach for evaluating the detectability of the mentioned defects. It is demonstrated that, when the dielectric strength of the coating is known, it is feasible to identify both through and non-through defects in coatings with a calculated probability under a specified test voltage. The conditions of occurrence of partial discharges in the process of testing are investigated, and measures to suppress their influence on the inspection results are proposed. The influence of the substrate surface roughness on the magnitude of the breakdown voltage during testing is considered.


  • Influence of interfering parameters on the results of continuity control of coatings by the electric spark method

    by I. S Gnivush, V. A Syasko, A. S Musikhin, Сясько В. А, Мусихин А. С

    The analysis of the influence of the surface roughness of the electrically conductive base and partial discharges on the process of testing dielectric coatings by the electrospark method is given. The simulation results and the obtained dependencies made it possible to formulate proposals regarding the operating modes of the equipment and the principles of fixing the discharge current, which reduce their influence on the reliability of the control.

  • Open Access

    Wavelet Analysis for Evaluating the Length of Precast Spliced Piles Using Low Strain Integrity Testing

    by Elizaveta Loseva, Ilya Lozovsky, Ruslan Zhostkov, Vladimir Syasko

    The difficulties with the application of low strain integrity testing for evaluating the length of driven precast piles of two sections justify the need for new data acquisition and analysis techniques. The standard time domain analysis of the recorded signals may not allow for distinguishing the desired responses from a pile toe and a splice. In this paper, we propose the use of a set of hammers of different weights and tip materials that will provide various sensitivities of the test to a pile splice. To further analyze the collected data, we study the distributions of phase angles obtained using complex continuous wavelet transform. The characteristic phase shifts that distribute from higher to lower frequencies can be interpreted as responses from a pile toe and a splice. To verify the proposed approaches, a series of numerical simulations were performed using the finite element method for the driven pile models with the different properties of a splice zone. Numerical simulation results show that the pile splices are clearly identified when using the shorter input pulses which can be generated by light hammers with a hard head material. The total length of a simulated pile with a 1 mm air gap between sections was undetectable by standard data analysis approaches and was evaluated when analyzing the wavelet phase angle distributions. Numerically validated data acquisition and analysis techniques were applied to field data analysis and allowed us to confidently identify the length of two-section piles grouped with a pile cap.


  • Open Access

    Modification of the Leeb Impact Device for Measuring Hardness by the Dynamic Instrumented Indentation Method

    by Aleksander Umanskii, Kirill Gogolinskii, Vladimir Syasko, Artem Golev

    The article is devoted to modification of the impact devices of Leeb hardness testers for the implementation of the dynamic instrumented indentation method. The results obtained made it possible to construct a load–displacement curve using primary EMF signals and made it possible to determine the values of the dissipated and elastic impact body energy, the maximal load of indentation, the maximal and residual penetration depth and the geometric parameters of the indentation region, namely the contact area of the indenter with the surface and the volume of the displaced material. The listed parameters of the indentation process allow us to measure the contact and volume hardness, the elastic modulus and the yield strength of test objects with portable hardness testers.