JCJing Chen

Jing Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jing Chen has a total of 65 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A visible‐to‐infrared miniaturized indium selenide spectrometer enabled by a gate‐tunable spectral response matrix

    by Jing Chen, Zhen‐Hua Wang, Zheng Zhang, Hengji Li, Xiao‐Ming Wu, Tian‐Ling Ren, Hong Liu, Min Jin, Lin Han

    Two‐dimensional heterostructure‐based computational spectrometers with broad operational bandwidths demonstrate significant potential for laboratory and industrial applications, including medical diagnostics, chemical analysis, and environmental monitoring. However, the fabrication difficulty of two‐dimensional heterostructures hinders their practical and scalable applications. Multilayer indium selenide (InSe), with its high carrier mobility (>10 3 cm 2 V −1 s −1 ) and direct bandgap of ∼1.3 eV, is a promising candidate for high‐performance broadband spectrometers. Here, we develop a homostructure InSe spectrometer, combining advanced computational spectral‐reconstruction algorithms with a gate‐tunable spectral response matrix to demonstrate a room‐temperature InSe‐based spectrometer with a broad operational bandwidth ranging from 450 to 973 nm. The device features a miniaturized footprint of approximately 20 × 50 μm 2 , achieves nanometer‐level resolution (<0.33 nm), and operates at low voltages ranging from −4 to+4 V. Our work paves the way for high‐performance computational spectrometers with diverse applications, including sensing, surveillance, proof‐of‐concept spectral imaging, and spectral measurements.

  • InSe Ferroelectric Field-Effect Transistor for Simultaneous Perception–Memory–Computation All-in-One Broadband Motion Detection

    by Jing Chen, Ping Li, Junqiang Zhu, Jianguo Hu, Guanhua Dun, Zhen-Hua Wang, Zheng Zhang, Hengji Li, Xiao-Ming Wu, Tian-Ling Ren, et al.

    With the ardent use of artificially intelligent robots, broadband motion detection and recognition (BMDR) technology with simultaneous perception-memory-computation functions is becoming essentially important. However, the existing state-of-the-art all-in-one BMDR remains insufficient. Herein, we demonstrate an InSe ferroelectric field-effect transistor exhibiting broadband responsivity from 450 to 973 nm, attributed to the moderate band gap of approximately 1.3 eV in InSe. The InSe device displays memory functionality derived from the ferroelectric properties of Pb(Zr0.2Ti0.8)O3 (PZT) and computational capability enabled by its progressive nonvolatile modulation of conductance, which facilitates artificial synapse-weight updating. Hence, the InSe ferroelectric field-effect transistor has a broadband perception-memory-computation functionality. Importantly, by integrating bias-based nonvolatile positive-direction/negative-direction photoconductive mechanisms with interframe differencing computations, the proposed InSe ferroelectric field-effect transistor achieves efficient motion detection and recognition (MDR) of a moving rabbit. The detected moving-rabbit images are subsequently fed into a neural network built on conductance mapping principles for classification, achieving 100% accuracy after only 40 training epochs, outperforming comparable results. The proposed work enables the development of the next-generation all-in-one BMDR technology based on two-dimensional devices.


  • Open Access

    Two-dimensional photosensor arrays for motion detection systems

    by Jing Chen, Tian-Ling Ren, Lin Han


  • InSe Dynamic Memristor-Based Reservoir Computing for Temporal and Spatial Signal Recognition

    by Jing Chen, Junqiang Zhu, Ping Li, Jianguo Hu, Qiuliang Li, Zhen-Hua Wang, Zheng Zhang, Hengji Li, Siqi Lin, Xiaofei Yue, et al.

    Multimodal recognition techniques are pivotal for advancing contemporary artificial intelligence, particularly in enhancing visual perception. However, research on electronic devices capable of robust multimodal recognition remains limited. In this study, we employ an InSe/Al2O3/ Pb(Zr0·2Ti0·8)O3 (PZT) heterostructure as a dynamic memristor. Moreover, the InSe dynamic-memristor-based optoelectronic reservoir computing (RC) system is developed for multimodal recognition of temporal and spatial signals. Under electrical modulation, the InSe dynamic-memristor-based parallel RC system has been employed to efficiently process temporal signal tasks, such as a waveform classification task with a normalized root-mean-square error (NRMSE) of 0.0873, and a spoken-digit recognition task achieving a recognition accuracy of 99%. Under optical modulation, the InSe dynamic-memristor-based RC system has been used for processing a spatial signal task for number-image recognition with 100% accuracy. The InSe dynamic-memristor-based optoelectronic RC system sets the stage for future interactive AI vision applications based on 2D electronic devices.


  • Polarized Tunneling Transistor for Ultralow-Energy-Consumption Artificial Synapse toward Neuromorphic Computing

    by Jing Chen, Xue-Chun Zhao, Ye-Qing Zhu, Zheng-Hua Wang, Zheng Zhang, Ming-Yuan Sun, Shuai Wang, Yu Zhang, Lin Han, Xiao-Ming Wu, et al.

    Neural networks based on low-power artificial synapses can significantly reduce energy consumption, which is of great importance in today's era of artificial intelligence. Two-dimensional (2D) material-based floating-gate transistors (FGTs) have emerged as compelling candidates for simulating artificial synapses owing to their multilevel and nonvolatile data storage capabilities. However, the low erasing/programming speed of FGTs renders them unsuitable for low-energy-consumption artificial synapses, thereby limiting their potential in high-energy-efficient neuromorphic computing. Here, we introduce a FGT-inspired MoS2/Trap/PZT heterostructure-based polarized tunneling transistor (PTT) with a simple fabrication process and significantly enhanced erasing/programming speed. Distinct from the FGT, the PTT lacks a tunnel layer, leading to a marked improvement in its erasing/programming speed. The PTT's highest erasing/programming (operation) speed can reach ∼20 ns, which outperforms the performance of most FGTs based on 2D heterostructures. Furthermore, the PTT has been utilized as an artificial synapse, and its weight-update energy consumption can be as low as 0.0002 femtojoule (fJ), which benefits from the PTT's ultrahigh operation speed. Additionally, PTT-based artificial synapses have been employed in constructing artificial neural network simulations, achieving facial-recognition accuracy (95%). This groundbreaking work makes it possible for fabricating future high-energy-efficient neuromorphic transistors utilizing 2D materials.


  • PZT-Enabled MoS2 Floating Gate Transistors: Overcoming Boltzmann Tyranny and Achieving Ultralow Energy Consumption for High-Accuracy Neuromorphic Computing

    by Jing Chen, Ye-Qing Zhu, Xue-Chun Zhao, Zheng-Hua Wang, Kai Zhang, Zheng Zhang, Ming-Yuan Sun, Shuai Wang, Yu Zhang, Lin Han, et al.

    Low-power electronic devices play a pivotal role in the burgeoning artificial intelligence era. The study of such devices encompasses low-subthreshold swing (SS) transistors and neuromorphic devices. However, conventional field-effect transistors (FETs) face the inherent limitation of the "Boltzmann tyranny", which restricts SS to 60 mV decade-1 at room temperature. Additionally, FET-based neuromorphic devices lack sufficient conductance states for highly accurate neuromorphic computing due to a narrow memory window. In this study, we propose a pioneering PZT-enabled MoS2 floating gate transistor (PFGT) configuration, demonstrating a low SS of 46 mV decade-1 and a wide memory window of 7.2 V in the dual-sweeping gate voltage range from -7 to 7 V. The wide memory window provides 112 distinct conductance states for PFGT. Moreover, the PFGT-based artificial neural network achieves an outstanding facial-recognition accuracy of 97.3%. This study lays the groundwork for the development of low-SS transistors and highly energy efficient artificial synapses utilizing two-dimensional materials.


  • Polarized Tunneling Transistor for Ultrafast Memory

    by Jing Chen, Guanhua Dun, Jianguo Hu, Zhu Lin, Yuhao Wang, Tian Lu, Ping Li, Tiantian Wei, Junqiang Zhu, Jing Wang, et al.

    In today's information age, high performance nonvolatile memory devices have become extremely important. Despite their potential, existing devices suffer from limitations, such as low operation speed, low memory capacity, short retention time, and a complex preparation process. To overcome these limitations, advanced memory designs are required to improve speed, memory capacity, and retention time and reduce the number of preparation steps. Here, we present a nonvolatile floating-gate-like memory device based on a transistor that uses the polarization effect of ferroelectric material PZT (Pb[Zr0.2Ti0.8]O3) for regulating tunneling electrons for charging and discharging the MoS2 channel layer. The transistor is defined as a polarized tunneling transistor (PTT) and does not require a tunnel layer or a floating-gate layer. The PTT demonstrates an ultrafast programming/erasing speed of 25/20 ns and a response time of 120/105 ns, which is comparable to the ultrafast flash memories based on van der Waals heterostructures. Additionally, the PTT has a high extinction ratio of 104, a long retention time of 10 years, and a simple fabrication process. Our research provides future guidelines for the development of the next generation of ultrafast nonvolatile memory devices.


  • Open Access

    Effect of Electrode Thickness on Quality Factor of Ring Electrode QCM Sensor

    by Zhenfang Wei, Jianguo Hu, Yuanyuan Li, Jing Chen

    As a key type of sensor, the quartz crystal microbalance (QCM) has been widely used in many research areas. Recently, the ring electrode QCM sensor (R-QCM) with more uniform mass sensitivity has been reported. However, the quality factor (Q-factor) of the R-QCM has still not been studied, especially regarding the effect of electrode thickness on the Q-factor. Considering that the Q-factor is one of crucial parameter to the QCM and it is closely related to the output frequency stability of the QCM, we study the effect of different electrode thicknesses on the Q-factor of the R-QCM in this paper. On the other hand, we clarify the relationship between the electrode thickness and the Q-factor of the R-QCM. The measurement results show that the average Q-factor increases with increases in the thickness of ring electrodes generally; however, the resonance frequency of the QCM resonator decreases with increases in the thickness. The low half-bandwidth (2Γ < 1630 Hz) of the R-QCM shows that the frequency performance is good. Additionally, the R-QCM has a higher Q-factor (Q > 6000), which indicates that it has a higher frequency stability and can be applied in many research areas.


  • The α-In2Se3 THz Photodetector

    by Jing Chen, Fan Wu, Ping Li, Jianguo Hu, He Tian, Xiao-Ming Wu, Yi Yang, Tian-Ling Ren

    Terahertz (THz) photodetectors are widely used for applications related to security measurements and medicine due to their noninvasive properties; they are also used in the sixth-generation (6G) communication standard. High-performance THz photodetectors are in high demand; 2-D materials with intriguing ultrafast charge transport characteristics are promising candidates for preparing high-performance THz photodetectors. However, only graphene and black phosphorus (BP), which have a high carrier mobility, have been extensively used for fabricating THz photodetectors. THz photodetectors based on other 2-D materials are extremely rare. This work focuses on the 2-D material $\alpha $ -In 2 Se 3 , which has a high carrier mobility, comparable to that of BP. An $\alpha $ -In 2 Se 3 transistor based on the plasma-wave-rectification effect was fabricated as a THz photodetector. The photocurrent of the $\alpha $ -In 2 Se 3 transistor under 0.12-THz illumination is smaller than that measured in dark conditions. Our THz photoresponse result is unusual compared with that of conventional THz devices. Two main factors contribute to this result. When the $\alpha $ -In 2 Se 3 transistor is under 0.12-THz illumination, first, a higher order recombination occurs, and the net carrier concentration then decreases; second, the carrier movement changes from being temperature-activated to being band-like transport, and the carrier mobility then decreases. Therefore, the photocurrent of the $\alpha $ -In 2 Se 3 transistor is smaller than the dark current. Furthermore, the $\alpha $ -In 2 Se 3 transistor has potential uses in memory applications due to the ferroelectricity of $\alpha $ -In 2 Se 3 . Thus, the $\alpha $ -In 2 Se 3 transistor can be developed for use as an artificial photoinhibitory synaptic device in all-optical neural network simulations and low-energy-consumption THz photodetectors.


  • Exploration of the Mass Sensitivity of Quartz Crystal Microbalance under Overtone Modes Using Electrodeposition Method

    by Jianguo Hu, Göktug Yesilbas, Yuanyuan Li, Xiangshun Geng, Ping Li, Jing Chen, Xiaoming Wu, Alois Knoll, Tian-Ling Ren

    With the in-depth application of quartz crystal microbalance (QCM) sensors in the fields of science and engineering, there is an urgent need for QCM sensors with high mass sensitivity. The mass sensitivity of a QCM is closely related to its resonance frequency, and the high resonance frequency leads to improve its mass sensitivity. However, the resonance frequency of a QCM resonator cannot be increased all the time due to the fragility of quartz wafer and the limits of energy trapping effect. Few studies are associated with mass sensitivity of a QCM resonator under overtone modes. Herein, we propose to make a QCM resonator work in its n-th overtone (n = 3, 5, 7, 9 in this study) mode to increase its resonance frequency during operating. Thereby, the purpose of improving QCM mass sensitivity is achieved, and the mass sensitivity of a QCM working in the n-th overtone mode can be called as n-th overtone mass sensitivity. Then, the n-th overtone mass sensitivity of a QCM sensor is measured by an electrodeposition method. The experimental results show that the n-th overtone mass sensitivity of a QCM is a bit more than n times that of the fundamental mass sensitivity, and it is consistent with the theoretical calculation results. The application of overtone mass sensitivity will greatly improve the sensitivity of QCM sensors, which is very attractive for the research fields that require QCM sensors with high sensitivity.