Chunjun Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Chunjun Chen has a total of 92 co-authors. Here are the top co-authors by number of shared publications:
- Buxing Han
Institute of Chemistry, Chinese Academy of Sciences
27 shared publications Yahui Wu
School of Pharmacy Bengbu Medical University Bengbu PR China
14 shared publicationsXupeng Yan
Beijing National Laboratory for Molecular Sciences, CAS Key Laboratory of Colloid and Interface and Thermodynamics, CAS Research/ Education Center for Excellence in Molecular Sciences, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, P. R. China
12 shared publications- Haihong Wu
Shanghai Key Laboratory of Green Chemistry and Chemical Processes, State Key Laboratory of Petroleum Molecular & Process Engineering, School of Chemistry and Molecular Engineering East China Normal University Shanghai China
11 shared publications Mingyuan He
Shanghai Key Laboratory of Green Chemistry and Chemical Processes, State Key Laboratory of Petroleum Molecular & Process Engineering, School of Chemistry and Molecular Engineering East China Normal University Shanghai China
9 shared publications- Shoujie Liu
School of Materials Science and Engineering Anhui University Hefei China
9 shared publications
Latest Publications
- 23 October 2026
- Published by Wiley in Angewandte Chemie
- p. e8790413
Electrosynthesis of p ‐Hydroxybenzoic Acid From Phenol and CO 2
P ‐hydroxybenzoic acid ( p ‐HBA), with wide applications in food preservatives, pesticides, pharmaceuticals, and liquid crystalline polyether, is currently synthesized via the Kolbe–Schmitt reaction using anhydrous phenolate (PhO − ) and carbon dioxide (CO 2 ). However, this reaction typically suffers from poor selectivity, and requires high temperature/pressure, strongly base, and metal/organic cations for selectivity control. Herein, we report a new method for the electrosynthesis of p ‐HBA from phenol (PhOH) and CO 2 by iodine mediation, achieving 61% yield and 90% selectivity without strong bases and metal cations under ambient temperature and pressure conditions. Mechanism studies indicated that PhOH was first selectively iodinated by iodine cations (I + ) generated at the anode to form p ‐iodophenol (HOPh‐I). Subsequently, HOPh‐I and CO 2 were respectively activated on Ag catalyst with abundant grain boundaries (GB‐Ag) through single‐electron reduction, and then underwent radical coupling processes to produce p ‐HBA. Notably, this electrochemical method also successfully converted various oxygen‐containing and nitrogen‐containing aromatic compounds, including the typical structural units of lignin and its derivatives, into valuable carboxylic acids. This innovative electrochemical approach overcomes the inherent limitations of the traditional Kolbe–Schmitt reaction, offering a promising strategy for the sustainable utilization of CO 2 and biomass resources.
- 23 October 2026
- Published by Wiley in Angewandte Chemie
- p. e8790413
Electrosynthesis of p ‐Hydroxybenzoic Acid From Phenol and CO 2
P ‐hydroxybenzoic acid ( p ‐HBA), with wide applications in food preservatives, pesticides, pharmaceuticals, and liquid crystalline polyether, is currently synthesized via the Kolbe–Schmitt reaction using anhydrous phenolate (PhO − ) and carbon dioxide (CO 2 ). However, this reaction typically suffers from poor selectivity, and requires high temperature/pressure, strongly base, and metal/organic cations for selectivity control. Herein, we report a new method for the electrosynthesis of p ‐HBA from phenol (PhOH) and CO 2 by iodine mediation, achieving 61% yield and 90% selectivity without strong bases and metal cations under ambient temperature and pressure conditions. Mechanism studies indicated that PhOH was first selectively iodinated by iodine cations (I + ) generated at the anode to form p ‐iodophenol (HOPh‐I). Subsequently, HOPh‐I and CO 2 were respectively activated on Ag catalyst with abundant grain boundaries (GB‐Ag) through single‐electron reduction, and then underwent radical coupling processes to produce p ‐HBA. Notably, this electrochemical method also successfully converted various oxygen‐containing and nitrogen‐containing aromatic compounds, including the typical structural units of lignin and its derivatives, into valuable carboxylic acids. This innovative electrochemical approach overcomes the inherent limitations of the traditional Kolbe–Schmitt reaction, offering a promising strategy for the sustainable utilization of CO 2 and biomass resources.
- 22 October 2026
- Published by Wiley in Angewandte Chemie International Edition
Electrosynthesis of p ‐Hydroxybenzoic Acid From Phenol and CO 2
P ‐hydroxybenzoic acid ( p ‐HBA), with wide applications in food preservatives, pesticides, pharmaceuticals, and liquid crystalline polyether, is currently synthesized via the Kolbe–Schmitt reaction using anhydrous phenolate (PhO − ) and carbon dioxide (CO 2 ). However, this reaction typically suffers from poor selectivity, and requires high temperature/pressure, strongly base, and metal/organic cations for selectivity control. Herein, we report a new method for the electrosynthesis of p ‐HBA from phenol (PhOH) and CO 2 by iodine mediation, achieving 61% yield and 90% selectivity without strong bases and metal cations under ambient temperature and pressure conditions. Mechanism studies indicated that PhOH was first selectively iodinated by iodine cations (I + ) generated at the anode to form p ‐iodophenol (HOPh‐I). Subsequently, HOPh‐I and CO 2 were respectively activated on Ag catalyst with abundant grain boundaries (GB‐Ag) through single‐electron reduction, and then underwent radical coupling processes to produce p ‐HBA. Notably, this electrochemical method also successfully converted various oxygen‐containing and nitrogen‐containing aromatic compounds, including the typical structural units of lignin and its derivatives, into valuable carboxylic acids. This innovative electrochemical approach overcomes the inherent limitations of the traditional Kolbe–Schmitt reaction, offering a promising strategy for the sustainable utilization of CO 2 and biomass resources.
- 22 October 2026
- Published by Wiley in Angewandte Chemie International Edition
Electrosynthesis of p ‐Hydroxybenzoic Acid From Phenol and CO 2
P ‐hydroxybenzoic acid ( p ‐HBA), with wide applications in food preservatives, pesticides, pharmaceuticals, and liquid crystalline polyether, is currently synthesized via the Kolbe–Schmitt reaction using anhydrous phenolate (PhO − ) and carbon dioxide (CO 2 ). However, this reaction typically suffers from poor selectivity, and requires high temperature/pressure, strongly base, and metal/organic cations for selectivity control. Herein, we report a new method for the electrosynthesis of p ‐HBA from phenol (PhOH) and CO 2 by iodine mediation, achieving 61% yield and 90% selectivity without strong bases and metal cations under ambient temperature and pressure conditions. Mechanism studies indicated that PhOH was first selectively iodinated by iodine cations (I + ) generated at the anode to form p ‐iodophenol (HOPh‐I). Subsequently, HOPh‐I and CO 2 were respectively activated on Ag catalyst with abundant grain boundaries (GB‐Ag) through single‐electron reduction, and then underwent radical coupling processes to produce p ‐HBA. Notably, this electrochemical method also successfully converted various oxygen‐containing and nitrogen‐containing aromatic compounds, including the typical structural units of lignin and its derivatives, into valuable carboxylic acids. This innovative electrochemical approach overcomes the inherent limitations of the traditional Kolbe–Schmitt reaction, offering a promising strategy for the sustainable utilization of CO 2 and biomass resources.
- 7 July 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (37)
Direct Electrosynthesis of Glycolate From Carbon Dioxide
Electrocatalytic carbon dioxide reduction reaction (CO 2 RR) is an attractive and green technology that can convert renewable electricity into high‐energy‐density fuel, which is of great significance for alleviating the dual pressures of energy and environmental concern. Although the electrosynthesis of some C 2 products (e.g., ethylene, acetate, and ethanol) has achieved certain success, the generation of glycolate is still beyond the scope of existing electrocatalytic technologies. Here, we report the electrochemical reaction of direct conversion of CO 2 to glycolate in aqueous media under ambient conditions using unsaturated Cu sites as the catalyst, with a production rate of glycolate up to 305 ± 24 mmol h −1 g −1 . Further mechanism studies have shown that the key to glycolate generation is the formation and timely desorption of the *OHCCHO intermediate after C–C coupling, followed by a disproportionation reaction with base to generate the product. This work provides a successful case for the sustainable synthesis of glycolic acid from CO 2 in aqueous media, which represents a new product from electrocatalytic CO 2 RR.
- 7 July 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (37)
Direct Electrosynthesis of Glycolate From Carbon Dioxide
Electrocatalytic carbon dioxide reduction reaction (CO 2 RR) is an attractive and green technology that can convert renewable electricity into high‐energy‐density fuel, which is of great significance for alleviating the dual pressures of energy and environmental concern. Although the electrosynthesis of some C 2 products (e.g., ethylene, acetate, and ethanol) has achieved certain success, the generation of glycolate is still beyond the scope of existing electrocatalytic technologies. Here, we report the electrochemical reaction of direct conversion of CO 2 to glycolate in aqueous media under ambient conditions using unsaturated Cu sites as the catalyst, with a production rate of glycolate up to 305 ± 24 mmol h −1 g −1 . Further mechanism studies have shown that the key to glycolate generation is the formation and timely desorption of the *OHCCHO intermediate after C–C coupling, followed by a disproportionation reaction with base to generate the product. This work provides a successful case for the sustainable synthesis of glycolic acid from CO 2 in aqueous media, which represents a new product from electrocatalytic CO 2 RR.
- 7 July 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (37) , e2505348
Direct Electrosynthesis of Glycolate From Carbon Dioxide
Electrocatalytic carbon dioxide reduction reaction (CO 2 RR) is an attractive and green technology that can convert renewable electricity into high‐energy‐density fuel, which is of great significance for alleviating the dual pressures of energy and environmental concern. Although the electrosynthesis of some C 2 products (e.g., ethylene, acetate, and ethanol) has achieved certain success, the generation of glycolate is still beyond the scope of existing electrocatalytic technologies. Here, we report the electrochemical reaction of direct conversion of CO 2 to glycolate in aqueous media under ambient conditions using unsaturated Cu sites as the catalyst, with a production rate of glycolate up to 305 ± 24 mmol h −1 g −1 . Further mechanism studies have shown that the key to glycolate generation is the formation and timely desorption of the *OHCCHO intermediate after C–C coupling, followed by a disproportionation reaction with base to generate the product. This work provides a successful case for the sustainable synthesis of glycolic acid from CO 2 in aqueous media, which represents a new product from electrocatalytic CO 2 RR.
- 7 July 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (37) , e2505348
Direct Electrosynthesis of Glycolate From Carbon Dioxide
Electrocatalytic carbon dioxide reduction reaction (CO 2 RR) is an attractive and green technology that can convert renewable electricity into high‐energy‐density fuel, which is of great significance for alleviating the dual pressures of energy and environmental concern. Although the electrosynthesis of some C 2 products (e.g., ethylene, acetate, and ethanol) has achieved certain success, the generation of glycolate is still beyond the scope of existing electrocatalytic technologies. Here, we report the electrochemical reaction of direct conversion of CO 2 to glycolate in aqueous media under ambient conditions using unsaturated Cu sites as the catalyst, with a production rate of glycolate up to 305 ± 24 mmol h −1 g −1 . Further mechanism studies have shown that the key to glycolate generation is the formation and timely desorption of the *OHCCHO intermediate after C–C coupling, followed by a disproportionation reaction with base to generate the product. This work provides a successful case for the sustainable synthesis of glycolic acid from CO 2 in aqueous media, which represents a new product from electrocatalytic CO 2 RR.
- Open Access
- 11 June 2026
- Published by Wiley in Carbon Energy
Constructing Enzyme‐Inspired Multisite Synergistic Catalyst for Promoting CO 2 Electroreduction to Ethylene at pH Universal Condition
Natural enzymes achieve high catalytic efficiency through the cooperative integration of catalytic centers, substrate‐binding sites, and a regulated local water environment. Inspired by this principle, we report an enzyme‐functional electrocatalyst that integrates these key elements into a Cu‐based architecture through molecular amine modification. The resulting multisite catalyst enables highly selective electrochemical CO 2 reduction to ethylene (C 2 H 4 ) with Faradaic efficiencies among the highest reported under pH‐universal conditions, delivering values of 64.5%, 72.0%, and 74.6% in acidic, neutral, and alkaline electrolytes, respectively. Mechanistic studies reveal that amine modification not only enhances CO 2 binding and *CO stabilization on Cu but also tailors the interfacial water structure by constructing a hydrogen‐bond network and suppressing excessive free water, thereby optimizing proton transfer and *CO/*H competition. This work establishes enzyme‐inspired interfacial water regulation as an effective strategy for selective CO 2 ‐to‐C 2 H 4 conversion.
- 11 June 2026
- Published by Wiley in Carbon Energy
Open AccessConstructing Enzyme‐Inspired Multisite Synergistic Catalyst for Promoting CO 2 Electroreduction to Ethylene at pH Universal Condition
Natural enzymes achieve high catalytic efficiency through the cooperative integration of catalytic centers, substrate‐binding sites, and a regulated local water environment. Inspired by this principle, we report an enzyme‐functional electrocatalyst that integrates these key elements into a Cu‐based architecture through molecular amine modification. The resulting multisite catalyst enables highly selective electrochemical CO 2 reduction to ethylene (C 2 H 4 ) with Faradaic efficiencies among the highest reported under pH‐universal conditions, delivering values of 64.5%, 72.0%, and 74.6% in acidic, neutral, and alkaline electrolytes, respectively. Mechanistic studies reveal that amine modification not only enhances CO 2 binding and *CO stabilization on Cu but also tailors the interfacial water structure by constructing a hydrogen‐bond network and suppressing excessive free water, thereby optimizing proton transfer and *CO/*H competition. This work establishes enzyme‐inspired interfacial water regulation as an effective strategy for selective CO 2 ‐to‐C 2 H 4 conversion.
- 11 March 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (17)
Ambient One‐Pot Electrocatalytic Synthesis of Caprolactam From Cyclohexanone and Nitrate Over Ag‐Ag 4 Sn‐SnO 2 Nanoparticles
Caprolactam (CPL), a monomer of nylon‐6 widely used in automotive, machinery, and electronics, is traditionally synthesized from cyclohexanone (CYC) through a complex process that generates low‐value ammonium sulfate, leading to environmental pollution. In contrast, electrochemical methods offer a safer, greener one‐pot synthesis of CPL from waste NO 3 – , but currently, the coupling of CYC and NO 3 – primarily produces cyclohexanone oxime (CHO), and the direct generation of CPL is challenging. Here, we report for the first time the electrochemical conversion of CYC and NO 3 – to high‐value CPL in a one‐pot process under ambient conditions. Using Ag‐Ag 4 Sn‐SnO 2 nanoparticle catalysts, we achieved a remarkable 96% yield and 97% selectivity for CPL electrosynthesis. In situ characterizations, control experiments, and theoretical calculations suggested the importance of balanced activation of NO 3 – and CYC substrates on the Ag‐Ag 4 Sn‐SnO 2 catalysts for achieving high‐efficient CPL electrosynthesis. The method also exhibits broad versatility in synthesizing various amide compounds, including paracetamol for antipyretic. Notably, scaling up the reactor enabled a high CPL production rate of 3.41 g h −1 g cat −1 with a 90.5% isolated yield, highlighting the potential of this technique for large‐scale electrosynthesis.
- 11 March 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (17)
Ambient One‐Pot Electrocatalytic Synthesis of Caprolactam From Cyclohexanone and Nitrate Over Ag‐Ag 4 Sn‐SnO 2 Nanoparticles
Caprolactam (CPL), a monomer of nylon‐6 widely used in automotive, machinery, and electronics, is traditionally synthesized from cyclohexanone (CYC) through a complex process that generates low‐value ammonium sulfate, leading to environmental pollution. In contrast, electrochemical methods offer a safer, greener one‐pot synthesis of CPL from waste NO 3 – , but currently, the coupling of CYC and NO 3 – primarily produces cyclohexanone oxime (CHO), and the direct generation of CPL is challenging. Here, we report for the first time the electrochemical conversion of CYC and NO 3 – to high‐value CPL in a one‐pot process under ambient conditions. Using Ag‐Ag 4 Sn‐SnO 2 nanoparticle catalysts, we achieved a remarkable 96% yield and 97% selectivity for CPL electrosynthesis. In situ characterizations, control experiments, and theoretical calculations suggested the importance of balanced activation of NO 3 – and CYC substrates on the Ag‐Ag 4 Sn‐SnO 2 catalysts for achieving high‐efficient CPL electrosynthesis. The method also exhibits broad versatility in synthesizing various amide compounds, including paracetamol for antipyretic. Notably, scaling up the reactor enabled a high CPL production rate of 3.41 g h −1 g cat −1 with a 90.5% isolated yield, highlighting the potential of this technique for large‐scale electrosynthesis.
- 10 March 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (17) , e6842784
Ambient One‐Pot Electrocatalytic Synthesis of Caprolactam From Cyclohexanone and Nitrate Over Ag‐Ag 4 Sn‐SnO 2 Nanoparticles
Caprolactam (CPL), a monomer of nylon‐6 widely used in automotive, machinery, and electronics, is traditionally synthesized from cyclohexanone (CYC) through a complex process that generates low‐value ammonium sulfate, leading to environmental pollution. In contrast, electrochemical methods offer a safer, greener one‐pot synthesis of CPL from waste NO 3 – , but currently, the coupling of CYC and NO 3 – primarily produces cyclohexanone oxime (CHO), and the direct generation of CPL is challenging. Here, we report for the first time the electrochemical conversion of CYC and NO 3 – to high‐value CPL in a one‐pot process under ambient conditions. Using Ag‐Ag 4 Sn‐SnO 2 nanoparticle catalysts, we achieved a remarkable 96% yield and 97% selectivity for CPL electrosynthesis. In situ characterizations, control experiments, and theoretical calculations suggested the importance of balanced activation of NO 3 – and CYC substrates on the Ag‐Ag 4 Sn‐SnO 2 catalysts for achieving high‐efficient CPL electrosynthesis. The method also exhibits broad versatility in synthesizing various amide compounds, including paracetamol for antipyretic. Notably, scaling up the reactor enabled a high CPL production rate of 3.41 g h −1 g cat −1 with a 90.5% isolated yield, highlighting the potential of this technique for large‐scale electrosynthesis.
- 10 March 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (17) , e6842784
Ambient One‐Pot Electrocatalytic Synthesis of Caprolactam From Cyclohexanone and Nitrate Over Ag‐Ag 4 Sn‐SnO 2 Nanoparticles
Caprolactam (CPL), a monomer of nylon‐6 widely used in automotive, machinery, and electronics, is traditionally synthesized from cyclohexanone (CYC) through a complex process that generates low‐value ammonium sulfate, leading to environmental pollution. In contrast, electrochemical methods offer a safer, greener one‐pot synthesis of CPL from waste NO 3 – , but currently, the coupling of CYC and NO 3 – primarily produces cyclohexanone oxime (CHO), and the direct generation of CPL is challenging. Here, we report for the first time the electrochemical conversion of CYC and NO 3 – to high‐value CPL in a one‐pot process under ambient conditions. Using Ag‐Ag 4 Sn‐SnO 2 nanoparticle catalysts, we achieved a remarkable 96% yield and 97% selectivity for CPL electrosynthesis. In situ characterizations, control experiments, and theoretical calculations suggested the importance of balanced activation of NO 3 – and CYC substrates on the Ag‐Ag 4 Sn‐SnO 2 catalysts for achieving high‐efficient CPL electrosynthesis. The method also exhibits broad versatility in synthesizing various amide compounds, including paracetamol for antipyretic. Notably, scaling up the reactor enabled a high CPL production rate of 3.41 g h −1 g cat −1 with a 90.5% isolated yield, highlighting the potential of this technique for large‐scale electrosynthesis.
- Open Access
- 1 May 2025
- Published by Wiley in Carbon and Hydrogen
- Vol. 27 (1) , 5-9
Efficient Electroreduction of CO2 to CH4 Over Amino Acid‐Modified Copper Under Acidic Conditions
Electroreduction of CO2 into CH4 under acidic conditions is a promising strategy for CO2 utilization, which allows for high CO2 conversion efficiency. However, the selectivity of CH4 is low because the hydrogen evolution reaction is enhanced under acidic conditions. Here, we report that the CO2 can be efficiently reduced into CH4 over a Cu catalyst by modifying with a glutamic acid molecule under acidic conditions. The CH4 Faradaic efficiency can reach 62.9% with a current density of 450 mA cm−2. Meanwhile, a single‐pass carbon efficiency of 48.1% toward CH4 is achieved. Experiments revealed that the glutamic acid molecule can enhance the concentration of K+ on the surface of Cu, which can suppress the HER and promote CO2 reduction, resulting in high selectivity of CH4 under acidic conditions.
- 1 May 2025
- Published by Wiley in Carbon and Hydrogen
- Vol. 27 (1) , 5-9
Open AccessEfficient Electroreduction of CO2 to CH4 Over Amino Acid‐Modified Copper Under Acidic Conditions
Electroreduction of CO2 into CH4 under acidic conditions is a promising strategy for CO2 utilization, which allows for high CO2 conversion efficiency. However, the selectivity of CH4 is low because the hydrogen evolution reaction is enhanced under acidic conditions. Here, we report that the CO2 can be efficiently reduced into CH4 over a Cu catalyst by modifying with a glutamic acid molecule under acidic conditions. The CH4 Faradaic efficiency can reach 62.9% with a current density of 450 mA cm−2. Meanwhile, a single‐pass carbon efficiency of 48.1% toward CH4 is achieved. Experiments revealed that the glutamic acid molecule can enhance the concentration of K+ on the surface of Cu, which can suppress the HER and promote CO2 reduction, resulting in high selectivity of CH4 under acidic conditions.
- 30 October 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (49)
Highly Selective CO 2 Electroreduction to Multi‐Carbon Alcohols via Amine Modified Copper Nanoparticles at Acidic Conditions
Electroreduction of CO 2 into multi‐carbon (C2+) products (e.g. C2+ alcohols) offers a promising way for CO 2 utilization. Use of strong alkaline electrolytes is favorable to producing C2+ products. However, CO 2 can react with hydroxide to form carbonate/bicarbonate, which results in low carbon utilization efficiency and poor stability. Using acidic electrolyte is an efficient way to solve the problems, but it is a challenge to achieve high selectivity of C2+ products. Here we report that the amine modified copper nanoparticles exhibit high selectivity of C2+ products and carbon utilization at acidic condition. The Faradaic efficiency (FE) of C2+ products reach up to 81.8 % at acidic media (pH=2) with a total current density of 410 mA cm −2 over n‐butylamine modified Cu. Especially the FE of C2+ alcohols is 52.6 %, which is higher than those reported for CO 2 electroreduction at acidic condition. In addition, the single‐pass carbon efficiency towards C2+ production reach up to 60 %. Detailed studies demonstrate that the amine molecule on the surface of Cu cannot only enhance the formation, adsorption and coverage of *CO, but also provide a hydrophobic environment, which result in the high selectivity of C2+ alcohols at acidic condition.
- 30 October 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (49)
Highly Selective CO 2 Electroreduction to Multi‐Carbon Alcohols via Amine Modified Copper Nanoparticles at Acidic Conditions
Electroreduction of CO 2 into multi‐carbon (C2+) products (e.g. C2+ alcohols) offers a promising way for CO 2 utilization. Use of strong alkaline electrolytes is favorable to producing C2+ products. However, CO 2 can react with hydroxide to form carbonate/bicarbonate, which results in low carbon utilization efficiency and poor stability. Using acidic electrolyte is an efficient way to solve the problems, but it is a challenge to achieve high selectivity of C2+ products. Here we report that the amine modified copper nanoparticles exhibit high selectivity of C2+ products and carbon utilization at acidic condition. The Faradaic efficiency (FE) of C2+ products reach up to 81.8 % at acidic media (pH=2) with a total current density of 410 mA cm −2 over n‐butylamine modified Cu. Especially the FE of C2+ alcohols is 52.6 %, which is higher than those reported for CO 2 electroreduction at acidic condition. In addition, the single‐pass carbon efficiency towards C2+ production reach up to 60 %. Detailed studies demonstrate that the amine molecule on the surface of Cu cannot only enhance the formation, adsorption and coverage of *CO, but also provide a hydrophobic environment, which result in the high selectivity of C2+ alcohols at acidic condition.
- 30 October 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (49) , e202410659
Highly Selective CO 2 Electroreduction to Multi‐Carbon Alcohols via Amine Modified Copper Nanoparticles at Acidic Conditions
Electroreduction of CO 2 into multi‐carbon (C2+) products (e.g. C2+ alcohols) offers a promising way for CO 2 utilization. Use of strong alkaline electrolytes is favorable to producing C2+ products. However, CO 2 can react with hydroxide to form carbonate/bicarbonate, which results in low carbon utilization efficiency and poor stability. Using acidic electrolyte is an efficient way to solve the problems, but it is a challenge to achieve high selectivity of C2+ products. Here we report that the amine modified copper nanoparticles exhibit high selectivity of C2+ products and carbon utilization at acidic condition. The Faradaic efficiency (FE) of C2+ products reach up to 81.8 % at acidic media (pH=2) with a total current density of 410 mA cm −2 over n‐butylamine modified Cu. Especially the FE of C2+ alcohols is 52.6 %, which is higher than those reported for CO 2 electroreduction at acidic condition. In addition, the single‐pass carbon efficiency towards C2+ production reach up to 60 %. Detailed studies demonstrate that the amine molecule on the surface of Cu cannot only enhance the formation, adsorption and coverage of *CO, but also provide a hydrophobic environment, which result in the high selectivity of C2+ alcohols at acidic condition.
- 30 October 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (49) , e202410659
Highly Selective CO 2 Electroreduction to Multi‐Carbon Alcohols via Amine Modified Copper Nanoparticles at Acidic Conditions
Electroreduction of CO 2 into multi‐carbon (C2+) products (e.g. C2+ alcohols) offers a promising way for CO 2 utilization. Use of strong alkaline electrolytes is favorable to producing C2+ products. However, CO 2 can react with hydroxide to form carbonate/bicarbonate, which results in low carbon utilization efficiency and poor stability. Using acidic electrolyte is an efficient way to solve the problems, but it is a challenge to achieve high selectivity of C2+ products. Here we report that the amine modified copper nanoparticles exhibit high selectivity of C2+ products and carbon utilization at acidic condition. The Faradaic efficiency (FE) of C2+ products reach up to 81.8 % at acidic media (pH=2) with a total current density of 410 mA cm −2 over n‐butylamine modified Cu. Especially the FE of C2+ alcohols is 52.6 %, which is higher than those reported for CO 2 electroreduction at acidic condition. In addition, the single‐pass carbon efficiency towards C2+ production reach up to 60 %. Detailed studies demonstrate that the amine molecule on the surface of Cu cannot only enhance the formation, adsorption and coverage of *CO, but also provide a hydrophobic environment, which result in the high selectivity of C2+ alcohols at acidic condition.