Shoujie Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shoujie Liu has a total of 369 co-authors. Here are the top co-authors by number of shared publications:
- Buxing Han
Institute of Chemistry, Chinese Academy of Sciences
13 shared publications - Chen Chen
Department of Chemistry, Tsinghua University, Beijing 100084, China
10 shared publications - Chunjun Chen
Shanghai Key Laboratory of Green Chemistry and Chemical Processes, State Key Laboratory of Petroleum Molecular & Process Engineering, School of Chemistry and Molecular Engineering East China Normal University Shanghai China
9 shared publications Yahui Wu
Beijing National Laboratory for Molecular Sciences, CAS Laboratory of Colloid and Interface and Thermodynamics, CAS Research/Education Center for Excellence in Molecular Sciences, Center for Carbon Neutral Chemistry, Institute of Chemistry Chinese Academy of Sciences Beijing 100190 P. R. China
9 shared publications- Xiaofu Sun
Beijing National Laboratory For Molecular Sciences CAS Laboratory of Colloid and Interface and Thermodynamics CAS Research/Education Centre For Excellence in Molecular Sciences Centre For Carbon Neutral Chemistry Institute of Chemistry Chinese Academy of Sciences Beijing China
8 shared publications Xupeng Yan
Beijing National Laboratory for Molecular Sciences, Key Laboratory of Colloid and Interface and Thermodynamics, Institute of Chemistry, Chinese Academy of Sciences, Beijing, China
8 shared publications
Latest Publications
- 6 November 2026
- Published by Wiley in Angewandte Chemie International Edition
Rare‐Earth Terbium Frustrates Deep Reconstruction of Cobalt Sulfide for Long‑Lived Anion Exchange Membrane Water Electrolysis
The practical application of metal sulfides in anion‐exchange membrane water electrolysis (AEMWE) is fundamentally hindered by the uncontrolled deep reconstruction under anodic conditions, which leads to rapid catalyst deactivation. Herein, with cobalt sulfide (Co 9 S 8 ) as a model, we introduce terbium (Tb) sites to frustrate deep reconstruction and relieve catalyst deactivation toward the oxygen evolution reaction (OER). The Tb‐Co 9 S 8 exhibits a low overpotential of 239 and 308 mV to reach 10 and 100 mA cm −2 , respectively toward OER. As an AEMWE anode, the Tb‐Co 9 S 8 achieves 1.0 A cm −2 at only 1.80 V and sustains continuous operation for 4200 h with a degradation rate of only 0.018 mV h −1 . The enhanced OER activity of Tb‐Co 9 S 8 originates from Tb incorporation, which inhibits deep bulk S‐O exchange and induces breathing‐like Co‐O coordination dynamics on the CoOOH active surface to curb over‐reconstruction and alleviate catalyst deactivation. Furthermore, asymmetric Tb atomic sites increase occupancy of spin‐state Co 3+ and optimize the local hydrogen‐bond network, which enhances lattice‐oxygen activation and renders *OH backfilling more spontaneous, thereby mitigating the activity‐stability trade‐off in the lattice oxygen mechanism. This work establishes a new rare‐earth‐mediated strategy to frustrate deep reconstruction and stabilize a real active surface for efficient and stable hydrogen production.
- 6 November 2026
- Published by Wiley in Angewandte Chemie International Edition
Rare‐Earth Terbium Frustrates Deep Reconstruction of Cobalt Sulfide for Long‑Lived Anion Exchange Membrane Water Electrolysis
The practical application of metal sulfides in anion‐exchange membrane water electrolysis (AEMWE) is fundamentally hindered by the uncontrolled deep reconstruction under anodic conditions, which leads to rapid catalyst deactivation. Herein, with cobalt sulfide (Co 9 S 8 ) as a model, we introduce terbium (Tb) sites to frustrate deep reconstruction and relieve catalyst deactivation toward the oxygen evolution reaction (OER). The Tb‐Co 9 S 8 exhibits a low overpotential of 239 and 308 mV to reach 10 and 100 mA cm −2 , respectively toward OER. As an AEMWE anode, the Tb‐Co 9 S 8 achieves 1.0 A cm −2 at only 1.80 V and sustains continuous operation for 4200 h with a degradation rate of only 0.018 mV h −1 . The enhanced OER activity of Tb‐Co 9 S 8 originates from Tb incorporation, which inhibits deep bulk S‐O exchange and induces breathing‐like Co‐O coordination dynamics on the CoOOH active surface to curb over‐reconstruction and alleviate catalyst deactivation. Furthermore, asymmetric Tb atomic sites increase occupancy of spin‐state Co 3+ and optimize the local hydrogen‐bond network, which enhances lattice‐oxygen activation and renders *OH backfilling more spontaneous, thereby mitigating the activity‐stability trade‐off in the lattice oxygen mechanism. This work establishes a new rare‐earth‐mediated strategy to frustrate deep reconstruction and stabilize a real active surface for efficient and stable hydrogen production.
- 6 November 2026
- Published by Wiley in Angewandte Chemie
Rare‐Earth Terbium Frustrates Deep Reconstruction of Cobalt Sulfide for Long‑Lived Anion Exchange Membrane Water Electrolysis
The practical application of metal sulfides in anion‐exchange membrane water electrolysis (AEMWE) is fundamentally hindered by the uncontrolled deep reconstruction under anodic conditions, which leads to rapid catalyst deactivation. Herein, with cobalt sulfide (Co 9 S 8 ) as a model, we introduce terbium (Tb) sites to frustrate deep reconstruction and relieve catalyst deactivation toward the oxygen evolution reaction (OER). The Tb‐Co 9 S 8 exhibits a low overpotential of 239 and 308 mV to reach 10 and 100 mA cm −2 , respectively toward OER. As an AEMWE anode, the Tb‐Co 9 S 8 achieves 1.0 A cm −2 at only 1.80 V and sustains continuous operation for 4200 h with a degradation rate of only 0.018 mV h −1 . The enhanced OER activity of Tb‐Co 9 S 8 originates from Tb incorporation, which inhibits deep bulk S‐O exchange and induces breathing‐like Co‐O coordination dynamics on the CoOOH active surface to curb over‐reconstruction and alleviate catalyst deactivation. Furthermore, asymmetric Tb atomic sites increase occupancy of spin‐state Co 3+ and optimize the local hydrogen‐bond network, which enhances lattice‐oxygen activation and renders *OH backfilling more spontaneous, thereby mitigating the activity‐stability trade‐off in the lattice oxygen mechanism. This work establishes a new rare‐earth‐mediated strategy to frustrate deep reconstruction and stabilize a real active surface for efficient and stable hydrogen production.
- 6 November 2026
- Published by Wiley in Angewandte Chemie
Rare‐Earth Terbium Frustrates Deep Reconstruction of Cobalt Sulfide for Long‑Lived Anion Exchange Membrane Water Electrolysis
The practical application of metal sulfides in anion‐exchange membrane water electrolysis (AEMWE) is fundamentally hindered by the uncontrolled deep reconstruction under anodic conditions, which leads to rapid catalyst deactivation. Herein, with cobalt sulfide (Co 9 S 8 ) as a model, we introduce terbium (Tb) sites to frustrate deep reconstruction and relieve catalyst deactivation toward the oxygen evolution reaction (OER). The Tb‐Co 9 S 8 exhibits a low overpotential of 239 and 308 mV to reach 10 and 100 mA cm −2 , respectively toward OER. As an AEMWE anode, the Tb‐Co 9 S 8 achieves 1.0 A cm −2 at only 1.80 V and sustains continuous operation for 4200 h with a degradation rate of only 0.018 mV h −1 . The enhanced OER activity of Tb‐Co 9 S 8 originates from Tb incorporation, which inhibits deep bulk S‐O exchange and induces breathing‐like Co‐O coordination dynamics on the CoOOH active surface to curb over‐reconstruction and alleviate catalyst deactivation. Furthermore, asymmetric Tb atomic sites increase occupancy of spin‐state Co 3+ and optimize the local hydrogen‐bond network, which enhances lattice‐oxygen activation and renders *OH backfilling more spontaneous, thereby mitigating the activity‐stability trade‐off in the lattice oxygen mechanism. This work establishes a new rare‐earth‐mediated strategy to frustrate deep reconstruction and stabilize a real active surface for efficient and stable hydrogen production.
- 1 November 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (11)
A wide-energy range multi-crystal x-ray emission spectrometer in the laboratory
We report on the design and performance of a wide-energy range, multi-crystal von Hamos-type spectrometer for x-ray emission spectroscopy (XES) in the laboratory. The instrument covers an energy range of 1.4–9 keV, encompassing emission lines from aluminum to actinide elements, thereby facilitating investigations of a broad range of complex reaction systems. An energy resolution of 0.9 eV is achieved at the S Kα emission line, enabling the detection of fine electronic structure details. By employing a 3 × 3 array of crystal analyzers, the solid angle per unit energy is increased to 0.87 msr/eV. Further coupling with a high-power x-ray source, the spectrometer provides a foundation for time-resolved XES measurements. The entire spectrometer is integrated into a glovebox and operates under an atmospheric helium atmosphere, allowing for in situ monitoring of reactions under diverse conditions. The development and deployment of this instrument provide a powerful tool for rapid material screening and tracking of dynamic electronic structure evolution.
- 1 November 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (11)
A wide-energy range multi-crystal x-ray emission spectrometer in the laboratory
We report on the design and performance of a wide-energy range, multi-crystal von Hamos-type spectrometer for x-ray emission spectroscopy (XES) in the laboratory. The instrument covers an energy range of 1.4–9 keV, encompassing emission lines from aluminum to actinide elements, thereby facilitating investigations of a broad range of complex reaction systems. An energy resolution of 0.9 eV is achieved at the S Kα emission line, enabling the detection of fine electronic structure details. By employing a 3 × 3 array of crystal analyzers, the solid angle per unit energy is increased to 0.87 msr/eV. Further coupling with a high-power x-ray source, the spectrometer provides a foundation for time-resolved XES measurements. The entire spectrometer is integrated into a glovebox and operates under an atmospheric helium atmosphere, allowing for in situ monitoring of reactions under diverse conditions. The development and deployment of this instrument provide a powerful tool for rapid material screening and tracking of dynamic electronic structure evolution.
- 26 October 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (41) , 16576-16589
Constructing Ce–O–Ni/Co units to modulate bimetallic active sites in regenerated terephthalic acid derived MOF catalysts for efficient upgrading of waste PET
Ce-decorated NiCo-MOF was fabricated with PET depolymerization-derived terephthalic acid as ligand. Asymmetric Ce–O–Ni/Co sites induce electron redistribution, boosting ethylene glycol oxidation to formic acid with high faradaic efficiency.
- 26 October 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (41) , 16576-16589
Constructing Ce–O–Ni/Co units to modulate bimetallic active sites in regenerated terephthalic acid derived MOF catalysts for efficient upgrading of waste PET
Ce-decorated NiCo-MOF was fabricated with PET depolymerization-derived terephthalic acid as ligand. Asymmetric Ce–O–Ni/Co sites induce electron redistribution, boosting ethylene glycol oxidation to formic acid with high faradaic efficiency.
- 22 October 2026
- Published by Springer Nature in Nature Catalysis
- Vol. 9 (10) , 1158-1168
Inducing local heating fields in ferromagnetic high-entropy alloys to inhibit (bi)carbonate formation for durable CO2 electroreduction
- 22 October 2026
- Published by Springer Nature in Nature Catalysis
- Vol. 9 (10) , 1158-1168
Inducing local heating fields in ferromagnetic high-entropy alloys to inhibit (bi)carbonate formation for durable CO2 electroreduction
- 20 April 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (23)
Unraveling the Crystal‐Field‐Mediated Cobalt Spin‐State Evolution for Electrocatalytic Ethylene Glycol Oxidation by In Situ X‐Ray Emission Spectroscopy
The electrocatalytic oxidation of polyethylene terephthalate (PET) derived ethylene glycol (EG) into valuable formate and hydrogen represents a sustainable waste valorization strategy. Although cobalt‐based oxyhydroxides (CoOOH) have emerged as promising electrocatalysts for the ethylene glycol oxidation reaction (EGOR), achieving high product selectivity remains challenging due to incomplete understanding of reaction mechanisms. Herein, we developed a phosphorus‐doped P‐CoOOH catalyst, in which the heteroatom incorporation effectively triggers lattice distortion and electronic reconstruction. These synergistic effects collectively promote a spin‐state transition of cobalt centers from a low‐spin to a high‐spin configuration. Such electronic reconfiguration creates synergistic electron‐deficient Co and electron‐rich P sites, with non‐degenerate orbitals facilitating selective C─C bond cleavage during EGOR. The innovative application of in situ x‐ray emission spectroscopy (XES) and x‐ray absorption spectroscopy (XAS) dynamically captures spin‐state evolution and suggests the structure‐activity relationship between high‐spin Co 3+ electronic configuration and product selectivity. The optimized P‐CoOOH/NF electrode achieves a low potential of 1.26 V versus RHE at 10 mA cm −2 with a formate selectivity of 93.7%. Overall, this work highlights that spin‐state engineering offers an effective strategy for steering polyol electrooxidation pathways.
- 20 April 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (23)
Unraveling the Crystal‐Field‐Mediated Cobalt Spin‐State Evolution for Electrocatalytic Ethylene Glycol Oxidation by In Situ X‐Ray Emission Spectroscopy
The electrocatalytic oxidation of polyethylene terephthalate (PET) derived ethylene glycol (EG) into valuable formate and hydrogen represents a sustainable waste valorization strategy. Although cobalt‐based oxyhydroxides (CoOOH) have emerged as promising electrocatalysts for the ethylene glycol oxidation reaction (EGOR), achieving high product selectivity remains challenging due to incomplete understanding of reaction mechanisms. Herein, we developed a phosphorus‐doped P‐CoOOH catalyst, in which the heteroatom incorporation effectively triggers lattice distortion and electronic reconstruction. These synergistic effects collectively promote a spin‐state transition of cobalt centers from a low‐spin to a high‐spin configuration. Such electronic reconfiguration creates synergistic electron‐deficient Co and electron‐rich P sites, with non‐degenerate orbitals facilitating selective C─C bond cleavage during EGOR. The innovative application of in situ x‐ray emission spectroscopy (XES) and x‐ray absorption spectroscopy (XAS) dynamically captures spin‐state evolution and suggests the structure‐activity relationship between high‐spin Co 3+ electronic configuration and product selectivity. The optimized P‐CoOOH/NF electrode achieves a low potential of 1.26 V versus RHE at 10 mA cm −2 with a formate selectivity of 93.7%. Overall, this work highlights that spin‐state engineering offers an effective strategy for steering polyol electrooxidation pathways.
- 18 April 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (23) , e4512481
Unraveling the Crystal‐Field‐Mediated Cobalt Spin‐State Evolution for Electrocatalytic Ethylene Glycol Oxidation by In Situ X‐Ray Emission Spectroscopy
The electrocatalytic oxidation of polyethylene terephthalate (PET) derived ethylene glycol (EG) into valuable formate and hydrogen represents a sustainable waste valorization strategy. Although cobalt‐based oxyhydroxides (CoOOH) have emerged as promising electrocatalysts for the ethylene glycol oxidation reaction (EGOR), achieving high product selectivity remains challenging due to incomplete understanding of reaction mechanisms. Herein, we developed a phosphorus‐doped P‐CoOOH catalyst, in which the heteroatom incorporation effectively triggers lattice distortion and electronic reconstruction. These synergistic effects collectively promote a spin‐state transition of cobalt centers from a low‐spin to a high‐spin configuration. Such electronic reconfiguration creates synergistic electron‐deficient Co and electron‐rich P sites, with non‐degenerate orbitals facilitating selective C─C bond cleavage during EGOR. The innovative application of in situ x‐ray emission spectroscopy (XES) and x‐ray absorption spectroscopy (XAS) dynamically captures spin‐state evolution and suggests the structure‐activity relationship between high‐spin Co 3+ electronic configuration and product selectivity. The optimized P‐CoOOH/NF electrode achieves a low potential of 1.26 V versus RHE at 10 mA cm −2 with a formate selectivity of 93.7%. Overall, this work highlights that spin‐state engineering offers an effective strategy for steering polyol electrooxidation pathways.
- 18 April 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (23) , e4512481
Unraveling the Crystal‐Field‐Mediated Cobalt Spin‐State Evolution for Electrocatalytic Ethylene Glycol Oxidation by In Situ X‐Ray Emission Spectroscopy
The electrocatalytic oxidation of polyethylene terephthalate (PET) derived ethylene glycol (EG) into valuable formate and hydrogen represents a sustainable waste valorization strategy. Although cobalt‐based oxyhydroxides (CoOOH) have emerged as promising electrocatalysts for the ethylene glycol oxidation reaction (EGOR), achieving high product selectivity remains challenging due to incomplete understanding of reaction mechanisms. Herein, we developed a phosphorus‐doped P‐CoOOH catalyst, in which the heteroatom incorporation effectively triggers lattice distortion and electronic reconstruction. These synergistic effects collectively promote a spin‐state transition of cobalt centers from a low‐spin to a high‐spin configuration. Such electronic reconfiguration creates synergistic electron‐deficient Co and electron‐rich P sites, with non‐degenerate orbitals facilitating selective C─C bond cleavage during EGOR. The innovative application of in situ x‐ray emission spectroscopy (XES) and x‐ray absorption spectroscopy (XAS) dynamically captures spin‐state evolution and suggests the structure‐activity relationship between high‐spin Co 3+ electronic configuration and product selectivity. The optimized P‐CoOOH/NF electrode achieves a low potential of 1.26 V versus RHE at 10 mA cm −2 with a formate selectivity of 93.7%. Overall, this work highlights that spin‐state engineering offers an effective strategy for steering polyol electrooxidation pathways.
- Open Access
- 6 June 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (23) , eadw2028
Synergy between unique Pt–C coordination and Pt quantum dots on TiO 2 for exceptional photocatalytic methanol dehydrogenation
Photocatalytic hydrogen production has emerged as a promising strategy to mitigate the environmental impact of carbon-intensive chemical industries. Loading single atoms is known to enhance photocatalytic efficiency, as their activity is heavily influenced by the microenvironment. Therefore, achieving precise control over the microenvironment of single atoms is crucial but remains a substantial challenge. Here, we reported a unique Pt–C/TiO 2 photocatalyst with Pt quantum dots (Pt QD ) and C-coordinated Pt single atoms (Pt SA ). Under the given experimental conditions, the hydrogen production rate reaches 43.2 mmol hour −1 with 70 mg of the photocatalyst. Notably, the hydrogen molecules generated per incident photon (H 2 /photon) reach 0.92. The special coordination environment influenced by C not only provides a direct transmission channel for photogenerated electrons but also activates surrounding Ti, thus improving the separation of the electron-hole pairs and H 2 production performance. This research provides a prospect of efficient on-site hydrogen production.
- 6 June 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (23) , eadw2028
Open AccessSynergy between unique Pt–C coordination and Pt quantum dots on TiO 2 for exceptional photocatalytic methanol dehydrogenation
Photocatalytic hydrogen production has emerged as a promising strategy to mitigate the environmental impact of carbon-intensive chemical industries. Loading single atoms is known to enhance photocatalytic efficiency, as their activity is heavily influenced by the microenvironment. Therefore, achieving precise control over the microenvironment of single atoms is crucial but remains a substantial challenge. Here, we reported a unique Pt–C/TiO 2 photocatalyst with Pt quantum dots (Pt QD ) and C-coordinated Pt single atoms (Pt SA ). Under the given experimental conditions, the hydrogen production rate reaches 43.2 mmol hour −1 with 70 mg of the photocatalyst. Notably, the hydrogen molecules generated per incident photon (H 2 /photon) reach 0.92. The special coordination environment influenced by C not only provides a direct transmission channel for photogenerated electrons but also activates surrounding Ti, thus improving the separation of the electron-hole pairs and H 2 production performance. This research provides a prospect of efficient on-site hydrogen production.
- 3 June 2025
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 15 (14) , 4291-4302
Hierarchical construction of Co nanoparticles embedded in an N doped carbon nanotube/porous nanosheet electrocatalyst for Zn–air batteries
Inefficient cathodic reactions severely limit the practical performance of rechargeable zinc–air batteries (RZABs) and become a fundamental bottleneck in their development. The exploitation of cost-effective cathode electrocatalysts is significant for addressing this issue. Herein, we demonstrate a facile programmed annealing strategy to fabricate an efficient electrocatalyst with a structure of Co nanoparticles embedded in N doped carbon nanotubes/porous nanosheets (Co@DUGC). Benefiting from the in situ wrapped Co nanoparticles and doped N as catalytic and adsorptive sites, and a hierarchical carbon nanotube/porous nanosheet architecture for fast electron transfer and mass diffusion, the fabricated Co@DUGC exhibits excellent bifunctional electrocatalytic performance with a positive half-wave potential of 0.87 V in the ORR and a low overpotential of 414 mV in the OER. As a cathodic catalyst, Co@DUGC endows a home-made liquid RZAB with a high peak power density of 150 mW cm−2, a large specific discharge capacity of 816.9 mA h gZn −1 and a durable rechargeability of 314 cycles. Meanwhile, a button RZAB based on Co@DUGC displays a peak power density of 85.3 mW cm−2, a specific discharge capacity of 643.7 mA h gZn −1 and a charge–discharge cycle life over 95 times, revealing its reliability for portable applications. This work demonstrates a convenient and rational design of transition metal decorated carbon electrocatalysts for high-performance RZABs.
- 3 June 2025
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 15 (14) , 4291-4302
Hierarchical construction of Co nanoparticles embedded in an N doped carbon nanotube/porous nanosheet electrocatalyst for Zn–air batteries
Inefficient cathodic reactions severely limit the practical performance of rechargeable zinc–air batteries (RZABs) and become a fundamental bottleneck in their development. The exploitation of cost-effective cathode electrocatalysts is significant for addressing this issue. Herein, we demonstrate a facile programmed annealing strategy to fabricate an efficient electrocatalyst with a structure of Co nanoparticles embedded in N doped carbon nanotubes/porous nanosheets (Co@DUGC). Benefiting from the in situ wrapped Co nanoparticles and doped N as catalytic and adsorptive sites, and a hierarchical carbon nanotube/porous nanosheet architecture for fast electron transfer and mass diffusion, the fabricated Co@DUGC exhibits excellent bifunctional electrocatalytic performance with a positive half-wave potential of 0.87 V in the ORR and a low overpotential of 414 mV in the OER. As a cathodic catalyst, Co@DUGC endows a home-made liquid RZAB with a high peak power density of 150 mW cm−2, a large specific discharge capacity of 816.9 mA h gZn −1 and a durable rechargeability of 314 cycles. Meanwhile, a button RZAB based on Co@DUGC displays a peak power density of 85.3 mW cm−2, a specific discharge capacity of 643.7 mA h gZn −1 and a charge–discharge cycle life over 95 times, revealing its reliability for portable applications. This work demonstrates a convenient and rational design of transition metal decorated carbon electrocatalysts for high-performance RZABs.
- Top Cited Papers
- 4 April 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (23) , e202506072
Engineering Heteronuclear Dual‐Metal Active Sites in Ordered Macroporous Architectures for Enhanced C2H4 Production from CO2 Photoreduction
Photocatalytic C2H4 synthesis from CO2 and H2O by utilizing solar energy represents a promising sustainable process, yet its efficiency remains significantly limited. Herein, we proposed a dual‐engineered strategy integrating 3D ordered macroporous (3DOM) architectures with heteronuclear dual‐metal active sites to synergistically promote the photocatalytic C2H4 production. As an example, the Cu/3DOM‐In2O3 photocatalyst was synthesized by in situ incorporating Cu single atoms (Cu SAs) into 3DOM In2O3 through a template‐assisted pyrolysis process. The strong interaction between Cu SAs and In2O3 resulted in the formation of charge‐polarized Cu─In active sites along with abundant oxygen vacancies (OVs). 3DOM architectures serving as special nanoreactors displayed significant advantages in promoting CO2 enrichment and confining key intermediates, thereby increasing *CO coverage. Meanwhile, the charge‐polarized Cu─In active sites effectively mitigated electrostatic repulsion and promoted the formation of *CO + *CHO intermediates, resulting in a thermodynamically spontaneous C─C coupling step. Therefore, the Cu/3DOM‐In2O3 photocatalyst exhibited robust CO2 reduction to C2H4, achieving high C2H4 evolution rates under various CO2 concentrations, including pure CO2, 10% CO2 in Ar (simulated flue gas), and 0.04% CO2 in Ar (simulated air). This work offers a novel strategy for the construction of photocatalysts with tailored microstructures and specific active sites to promote the conversion of CO2 and H2O into multicarbon products.
- 4 April 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (23) , e202506072
Top Cited PapersEngineering Heteronuclear Dual‐Metal Active Sites in Ordered Macroporous Architectures for Enhanced C2H4 Production from CO2 Photoreduction
Photocatalytic C2H4 synthesis from CO2 and H2O by utilizing solar energy represents a promising sustainable process, yet its efficiency remains significantly limited. Herein, we proposed a dual‐engineered strategy integrating 3D ordered macroporous (3DOM) architectures with heteronuclear dual‐metal active sites to synergistically promote the photocatalytic C2H4 production. As an example, the Cu/3DOM‐In2O3 photocatalyst was synthesized by in situ incorporating Cu single atoms (Cu SAs) into 3DOM In2O3 through a template‐assisted pyrolysis process. The strong interaction between Cu SAs and In2O3 resulted in the formation of charge‐polarized Cu─In active sites along with abundant oxygen vacancies (OVs). 3DOM architectures serving as special nanoreactors displayed significant advantages in promoting CO2 enrichment and confining key intermediates, thereby increasing *CO coverage. Meanwhile, the charge‐polarized Cu─In active sites effectively mitigated electrostatic repulsion and promoted the formation of *CO + *CHO intermediates, resulting in a thermodynamically spontaneous C─C coupling step. Therefore, the Cu/3DOM‐In2O3 photocatalyst exhibited robust CO2 reduction to C2H4, achieving high C2H4 evolution rates under various CO2 concentrations, including pure CO2, 10% CO2 in Ar (simulated flue gas), and 0.04% CO2 in Ar (simulated air). This work offers a novel strategy for the construction of photocatalysts with tailored microstructures and specific active sites to promote the conversion of CO2 and H2O into multicarbon products.