CBChristoph Blunk

Christoph Blunk

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Christoph Blunk has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Joints with lockbolts in steel structures – Part 2: Design and execution

    by Ralf Glienke, Mathias Schwarz, Andreas Ebert, Christoph Blunk, Martin‐Christoph Wanner

    Many mechanical joints in steel structures use conventional bolts. Nevertheless, this proven joining technology has some significant disadvantages. These basically include the high levels of scatter during application of the assembly preload using the torque‐controlled tightening process, the risk of loosening during cyclic loads due to transverse displacement of the components and the low fatigue resistance under axial loading. Lockbolt technology was invented as long ago as the 1930s and mainly used for the aviation and space industry because of its evident advantages. This joining technology has been constantly further developed in response to the most diverse demands from sectors such as aviation, commercial vehicles, rail vehicles, agricultural machinery, defence technology and steel structures. The application of lockbolt technology, which is primarily used in mechanical engineering, was in most cases based on individual studies, since no consistent rules and guidelines were available for the design and execution of lockbolt connections in steel structures. Within the scope of several public research projects funded by the AiF (German Federation of Industrial Research Associations) and conducted by the iGF (Industrial Collective Research) organization as well as through approval investigations, the Fraunhofer Institute for Large Structures in Production Engineering (IGP) has successively developed the necessary design rules according to the EN 1993 standard (Eurocode 3) for use in structural connections. These design rules will be presented within the context of this article in order to make the benefits of this joining technology available to other users. In addition, insights into the use of technical approvals will be presented together with some current applications.


  • Joints with lockbolts in steel structures – Part 1: Lockbolt technology

    by Ralf Glienke, Mathias Schwarz, Andreas Ebert, Christoph Blunk, Martin‐Christoph Wanner

    Many mechanical joints in steel structures use conventional bolts. Nevertheless, this proven jointing technology has some significant disadvantages. These basically include the high levels of scatter during application of the assembly preload using the torque‐controlled tightening process, the risk of loosening during cyclic loads due to transverse displacement of the components and the low fatigue resistance under axial loading. Lockbolt technology was invented as long ago as the 1930s and mainly used for the aviation and space industry because of its evident advantages. This jointing technology has been constantly further developed in response to the most diverse demands from sectors such as aviation, commercial vehicles, rail vehicles, agricultural machinery, defence technology and steel structures. The application of lockbolt technology, which is primarily used in mechanical engineering, was in most cases based on individual studies, since no consistent rules and guidelines were available for the design and execution of lockbolt connections in steel structures. Within the scope of several public research projects funded by the AiF (German Federation of Industrial Research Associations) and conducted by the iGF (Industrial Collective Research) organization as well as through approval investigations, the Fraunhofer Institute for Large Structures in Production Engineering (IGP) has successively developed the necessary design rules according to the EN 1993 standard (Eurocode 3) for use in structural connections. This paper presents connections with lockbolts in steel structures. Following an introduction to lockbolt technology and the assembly preload of lockbolts, the securing effect and corrosion protection of lockbolts are presented.


  • Zur Bemessung von Scher‐/Lochleibungsverbindungen mit Blindnieten im Stahlbau

    by Florian Kalkowsky, Ralf Glienke, Christoph Blunk, Maik Dörre, Knuth‐Michael Henkel


  • Zur Bemessung und Ausführung von querkraftbeanspruchten Blindnietverbindungen im Stahlleichtbau

    by Florian Kalkowsky, Ralf Glienke, Christoph Blunk, Maik Dörre, Knuth‐Michael Henkel

    Die Blindniettechnik gilt als ein sehr schnelles und prozesssicheres Fügeverfahren. Blindniete werden überall dort eingesetzt, wo klassische Fügeverfahren, wie bspw. das Schweißen oder Schrauben, technologisch oder konstruktiv bedingt nicht eingesetzt werden können oder unwirtschaftlich sind. Zu den klassischen Anwendungsgebieten im Stahlleichtbau gehören die Befestigungen von Dach‐ und Wandverkleidungen. Darüber hinaus werden weitere Anwendungsfelder wie z. B. Hochregallager und Wohncontainer von der Blindniettechnik erobert. Leider bestehen seitens der Ausführung und Bemessung von Verbindungen mit Blindnieten im Stahlleichtbau für zuvor genannte Konstruktionen einige Hürden, sodass bislang immer auf einen bauaufsichtlichen Verwendbarkeitsnachweis zurückgegriffen werden muss. Dieser kann meist nur durch zeit‐ und kostenintensive Einzelfalluntersuchungen erlangt werden. Darüber hinaus ist die bestehende normative Regelung durch DIN EN 1993‐1‐3 sowie DIN EN 1090‐4 nach Meinung der Verfasser unzureichend, was einem breiteren Einsatz der Blindniettechnik momentan noch entgegensteht.In diesem Beitrag werden die Ergebnisse aus systematischen Untersuchungen zur Abscher‐ und Lochleibungstragfähigkeit von Blindnieten und den damit hergestellten Verbindungen vorgestellt. Ziel der Untersuchungen war die Überprüfung und Erweiterung der im EC 3 bestehenden Bemessungs‐ und Ausführungsregeln für Blindnietverbindungen, um zukünftig einen rein rechnerischen Nachweis der DIN EN 1993‐1‐3 für querkraftbeanspruchte Blindnietverbindungen zu erlauben und somit den erforderlichen Aufwand für eine versuchsgestützte Bemessung zu reduzieren.