IGIryna Galstian

Iryna Galstian

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Iryna Galstian has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Conductivity of Strongly Correlated Substitutional Binary Alloys at Finite Temperatures and under Field-Induced Magnetic Polarization

    by Evgen Len, Tetiana Shatnii, Tetiana Len, Yevheniy Tsapko, Iryna Galstian

    Strong electron correlations in substitutional magnetic alloys can coexist with chemical disorder and magnetic short-range order, making transport sensitive to external perturbations. We develop a minimal one-band Hubbard model combining configurational averaging, cluster expansion of the T-matrix, the Zeeman interaction, and quasi-static electron-phonon scattering. One- and two-particle Green functions describe the electronic spectrum, free energy, magnetic correlations, and electrical conductivity. Increasing band filling produces strongly nonmonotonic conductivity and an evolution from FM through an SG-like crossover to AFM correlations and Mott–Hubbard localization. Chemical disorder predominantly lowers conductivity and broadens the magnetic crossover. Even weak thermal perturbations relative to the characteristic electronic energy scale can strongly modify magnetic correlations and transport, including a step-like conductivity decrease near the model Néel temperature. Field-induced one-site spin polarization can either enhance or suppress conductivity depending on band filling and magnetic state, reflecting the coupled effects of spectral reconstruction, correlated pair scattering, and localization-delocalization.

  • Open Access

    Effect of caesium adsorption on the emission properties of tungsten and molybdenum single-crystal surfaces (100) and (110) for application in nuclear and thermonuclear reactors

    by I. Ye Galstian, E.G. Len, S.V. Smolnik, M. Ya Shevchenko, T.D. Shatnii, Ye A. Tsapko, I.M. Makeieva, O. Yu Gerasymov

  • Open Access

    Thermophotoinduced electron emission from conductive composite based on polytetrafluoroethylene with carbon nanotubes

    by I. Ye. Galstian, M. Ya. Shevchenko, Ye. A. Tsapko, T. D. Shatnii, O. M. Lisova, E. G. Len

    This work explores the potential of conductive polymer–carbon nanocomposites, specifically polytetrafluoroethylene with multi-walled carbon nanotubes (PTFE–CNTs), as efficient electron emitters for emission electronics, low-temperature thermionic energy conversion (TEC), sensors, elements of information storage devices, and materials with targeted control of electromagnetic waves’ absorption/reflection. Our main scientific contribution is the demonstration of electron emission from investigated composite PTFE + 10 wt% CNTs at significantly reduced operating temperatures (near 200 °C), much lower than those for pure CNTs and conventional materials for emission electronics and energy. The research combines experimental studies of electron emission under concentrated solar and pulsed laser radiation, structural characterization of samples by electron microscopy, and positron spectroscopy. The last method and contact potential difference method are used to investigate the electronic properties, including charge transfer between composite components, and the work function of the material. Results indicate that electrons can be emitted from both the surface and subsurface (through the polymer layer) of CNTs. The emission current can be enhanced by the Schottky effect due to the electrical fields of adsorbed cations. Additionally, a novel method for tuning the composite’s work function due to irradiation by low-energy electrons is proposed. It opens pathways for targeted control not only of emission performance but other electronic properties of polymer–carbon nanocomposites, including absorption and reflection of electromagnetic waves in a wide frequency range.


  • Open Access

    Effect of high energy laser processing on defect and structural phase state of titanium products made by additive technologies

    by Evgen Len, Iryna Galstian, Tobias Gustmann, Olexandr Gerasymov, Dmytro Savvakin, Vadim Bondarchuk, Denis Oryshych

    The microstructure, physical, and mechanical characteristics of 3D-printed metal products can be improved with high-energy heat treatment included in the manufacturing process. In the present study, Ti-6Al-4V titanium alloy products were 3D-printed with electron beam melting of wire of appropriate composition, while surface laser treatment of 3D-printed material was studied to determine the potential of microstructure modification and characteristics improvement. It was found that certain laser processing modes make it possible to eliminate micro defects (pores) in the samples that are harmful to structural materials. The obtained results also open the prospect of creating 3D-printed metal parts with specified profiles of physical and chemical properties, including gradients, as they model the change in material properties depending on the depth of the deposited layer during high-energy processing of each layer during its application. As demonstrated, both the condition of 3D printing as the velocity of deposition and thickness of each layer, the chemical composition and amount of impurities added to the matrix material during deposition, and the high-energy processing (heating or remelting) parameters are important to form the phase composition and mechanical properties of the final products. The high-energy processing also can be used to control the physicochemical properties of the product’s surface.

  • Open Access

    Effect of Caesium Adsorption on Emission Properties of (100) and (110) Surfaces of Tungsten and Molybdenum Single Crystals

    by Svyatoslav Smolnik, Iryna Galstian, Mykola Shevchenko, Tatiana Shatnii, Yevgen Tsapko, Olexandr Gerasymov, I. M. Makeeva, Sergij Mulenko, Evgen Len

    The paper examines the possibilities of using the electrode complex of the thermionic energy converter (TIC), which made from single crystals of the same type of refractory metals, but with different crystallographic orientations of the working surfaces of the cathode and anode. It solves the problem of evaporation of the cathode material at high operating temperatures and its deposition on the anode, and significantly extends the lifetime of the TIC. The dependences of the reflection coefficient of slow electrons and the electron work function on the concentration of caesium adsorbed on the (100) and (110) surfaces of molybdenum and tungsten single crystals have been studied by the methods of full-current spectroscopy and contact potential difference. As shown, the work function of both faces of the investigated single crystals of refractory metals changes nonmonotonically with an increase of the caesium concentration on the surfaces: at first, it decreases rapidly and reaches a minimum, and then, it smoothly increasing and reaches saturation. As found, due to the adjustment of the cathode and anode temperatures, which determine the concentration of caesium adsorbed on these electrodes, and due to the residual pressure of caesium vapor in the vacuum gap of the TIC, it is possible to satisfy the conditions for obtaining a significant power of the TIC, when the optimal difference in the values of the emitter and collector work function is realized (near 1–1.5 eV) with minimal reflection of electrons from the surface of the anode.


  • Open Access

    The Effect of Hydrogen Content on Electrophysical Properties of Hydrogenated Titanium – Thermally Expanded Graphite Composites

    by Iryna Galstian, H. Yu. Mykhailova, E. G. Len, M. M. Yakymchuk, V. A. Dekhtyarenko, J. Werner, T. D. Shatnii

    The nanocomposites based on metals with carbon nanostructures can be used as cathode materials for low temperature thermionic converters. Such materials often have different electrophysical properties from their original components. The peculiarities of the changes in electrical conductivity of powder composites containing thermally expanded graphite (TEG) and hydrogenated titanium before and after hydrogen desorption are investigated, and the influence of hydrogen on their properties is determined. The effect of conductivity growth is found at low TEG concentration in composites with both hydrogenated and dehydrogenated titanium. It can be explained by charge transfer from the metal to the TEG components of the composites. The effect of significant increase of composite conductivity after dehydrogenation can be explained by reduction of titanium oxide shell during hydrogen desorption from metal particle and by peculiarities of Fermi level shift in it during changes of electron concentration due to charge transfer to TEG.

  • Open Access

    Influence of multi-walled carbon nanotubes in polytetrafluoroethylene on the parameters of electronic structure and absorption of ultra-high-frequency radiation

    by I. Ye. Galstian, Ye. A. Tsapko, O. V. Makarenko, A. L. Yampolskiy, Ye. V. Tarusin, E. G. Len

    Using the methods of angular correlation of annihilation radiation (ACAR), attenuation of electromagnetic radiation in 1.5–2.2 GHz frequency range, and optical ellipsometry, it was shown that in composites of polytetrafluoroethylene (PTFE) + multi-walled carbon nanotubes (MWCNTs), a 2% decrease in the probability of annihilation of positrons in free volumes in PTFE leads to changes in other parameters of electronic structure of composites by 8–29%. Polytetrafluoroethylene is transparent to electromagnetic radiation, but after the addition of 10 wt.% or more of MWCNTs, the composites demonstrate 200–410-fold decrease in the electromagnetic radiation intensity when the radiation passes through a specimen with a thickness of ≈2 mm. It was found that the average radius of the free volumes and the probability of annihilation of positrons are determined by the defect and electronic structures of the polymer matrix only. The Fermi angle and the probability of positrons annihilation with free electrons are determined by the analogous structures of MWCNTs only. Since the electronic characteristics of the atoms and defects in the polymer matrix (at least outside the interphase) do not change, the changes in the other ACAR parameters are mainly due to changes in the imperfect MWCNTs’ atomic and electronic structures. The average radius of free volumes reaches its maximum value in the composite with 10 wt.% MWCNTs. It was found that in a specimen with 10 wt.% MWCNTs, the highest density of free electrons is observed due to charge transfer from free volumes to MWCNTs, and the highest electron density is observed on defects. A disorder of MWCNTs and their branched conductive network can form the ‘tails’ of electronic density of states in a band gap. Thus, composite with 10 wt.% MWCNTs has the highest absorption coefficient for electromagnetic radiation.


  • Open Access

    Influence of Multiwalled Carbon Nanotubes in Polytetrafluoroethylene on the Parameters of Electronic Structure and Absorption of UHF Radiation

    by Iryna Galstian, Yevgen Tsapko, Olexiy Makarenko, A.L. Yampolskiy

    Using the methods of angular correlation of annihilation radiation, attenuation of electromagnetic radiation in 1.5–2 2 GHz frequency range, and optical ellipsometry, it was shown that a 2% decrease in the probability of annihilation of positrons in pores of free volume leads to changes in the parameters of electronic structure of composites by 15–25% in composites of polytetrafluoroethylene (PTFE) + multiwalled carbon nanotubes (MWCNTs). Polytetrafluoroethylene is transparent to electromagnetic radiation, but after the addition of 10 wt% multiwalled carbon nanotubes, the composite demonstrates a more than 400-fold decrease in the electromagnetic radiation intensity when the radiation passes through a specimen with a thickness of ≈2 mm. It was found that the average radius of the free volume pores and the probability of annihilation of positrons in this area are determined by the electronic structure parameters of the polymer matrix only. The Fermi angle and the probability of positrons annihilation with free electrons are determined by the electronic structure parameters of MWCNTs only. Since the electronic structure of the cores and defects of the polymer matrix (at least outside the interphase) does not change, changes in these characteristics are mainly due to changes in the MWCNTs electronic structure. It was found that in a specimen with 10 wt% MWCNTs, the highest density of free electrons is observed, and the highest electron density is observed on defects. The average of free volume pore radius reaches its maximum value at 10 wt% MWCNTs in the composite.