Wawan Hermawan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wawan Hermawan has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Fakultas Teknologi Pertanian Departemen Teknik Mesin Dan Biosistem
Institut Pertanian Bogor Program Pascasarjana Manajemen dan Bisnis
9 shared publications - Radite Praeko Agus Setiawan
Institut Pertanian Bogor
3 shared publications - Agustami Sitorus
Research Center for Artificial Intelligence and Cyber Security, National Research and Innovation Agency (BRIN), Bandung 40135, Indonesia
2 shared publications - Desrial Desrial
Institut Pertanian Bogor
2 shared publications Institut Pertanian Bogor Program Studi Teknik Mesin Pertanian Dan Pangan
2 shared publicationsAbdul Azis
Institut Pertanian Bogor. 2. Universitas Hasanudin
1 shared publication
Latest Publications
- Open Access
- 1 August 2018
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 6 (2) , 115-122
Optimization of Decision Support System for Maintenance of Machineries Production
Abstract Machinery maintenance activities conducted at Sang Hyang Seri Company are corrective maintenance, that means the maintenance is unscheduled and done reactively function of machine impaired. Impact of corrective maintenance varies greatly, among others are demaging the produced seed, stopping the operation under certain damage, and a lot of unscheduled downtime. Therefore, it is necessary to design a maintenance schedule based on the optimization of service life with maintenance costs required. The objective of this research was to design a decision support system which able to regulate the maintenance activities, and analyzed the maintenance costs as a result of the system implementation. Database used includes list of production machines, machine parts, history of machine condition, history of machine damage, history of machine replacement, daily mechanical record, daily seed production, and price of component. This research was conducted following the principles of System Development Life Cycle (SDLC) i.e. stage of system investigation, system analysis, system design and development, and system implementation. The databased was formed with Microsoft Access 2003 and the application was created with Visual Basic 6.0, while the report with Crystal Report. For model base used in decision support systems time and component replacement optimization. The output of the system was a form schedule 4 monthly activity. Cost analysis performed on 10 components from total 294 components in 3 year cycle obtained by machine maintenance cost reduction of 54.5%. Abstrak Kegiatan pemeliharaan mesin di PT Sang Hyang Seri dilakukan secara korektif, yakni pemeliharaan tidak terjadwal yang dilakukan karena mesin mengalami gangguan fungsional. Dampak dari pemeliharaan korektif antara lain adanya kerusakan benih yang dihasilkan dan terhentinya operasi pada kondisi kerusakan tertentu, serta menimbulkan banyak downtime yang tidak terjadwal. Oleh karena itu, perlu dirancang jadwal pemeliharaan berdasarkan optimasi umur pakai dan biaya pemeliharaan yang dibutuhkan. Penelitian ini bertujuan membangun sistem penunjang keputusan yang mampu mengatur kegiatan pemeliharaan mesin secara berkala serta melakukan analisa biaya pemeliharaan sebagai dampak dari penerapan sistem tersebut. Penelitian dilakukan mengikuti prinsip System Development Life Cycle (SDLC) yakni tahap investigasi sistem, analisa sistem, desain dan pengembangan sistem, dan implementasi sistem. Basis data yang digunakan meliputi basis data daftar mesin produksi, komponen mesin, riwayat kondisi mesin, catatan kegiatan harian mekanik, data produksi benih harian, dan harga komponen mesin. Basis model yang digunakan dalam sistem ini yakni optimasi waktu dan biaya penggantian komponen. Hasil luaran dari sistem berupa jadwal kegiatan setiap periode 4 bulanan. Analisa biaya dilakukan terhadap 10 komponen dari total 294 komponen dalam siklus 3 tahunan diperoleh reduksi biaya pemeliharaan mesin sebesar 54.5%.
- 1 August 2018
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 6 (2) , 115-122
Open AccessOptimization of Decision Support System for Maintenance of Machineries Production
Abstract Machinery maintenance activities conducted at Sang Hyang Seri Company are corrective maintenance, that means the maintenance is unscheduled and done reactively function of machine impaired. Impact of corrective maintenance varies greatly, among others are demaging the produced seed, stopping the operation under certain damage, and a lot of unscheduled downtime. Therefore, it is necessary to design a maintenance schedule based on the optimization of service life with maintenance costs required. The objective of this research was to design a decision support system which able to regulate the maintenance activities, and analyzed the maintenance costs as a result of the system implementation. Database used includes list of production machines, machine parts, history of machine condition, history of machine damage, history of machine replacement, daily mechanical record, daily seed production, and price of component. This research was conducted following the principles of System Development Life Cycle (SDLC) i.e. stage of system investigation, system analysis, system design and development, and system implementation. The databased was formed with Microsoft Access 2003 and the application was created with Visual Basic 6.0, while the report with Crystal Report. For model base used in decision support systems time and component replacement optimization. The output of the system was a form schedule 4 monthly activity. Cost analysis performed on 10 components from total 294 components in 3 year cycle obtained by machine maintenance cost reduction of 54.5%. Abstrak Kegiatan pemeliharaan mesin di PT Sang Hyang Seri dilakukan secara korektif, yakni pemeliharaan tidak terjadwal yang dilakukan karena mesin mengalami gangguan fungsional. Dampak dari pemeliharaan korektif antara lain adanya kerusakan benih yang dihasilkan dan terhentinya operasi pada kondisi kerusakan tertentu, serta menimbulkan banyak downtime yang tidak terjadwal. Oleh karena itu, perlu dirancang jadwal pemeliharaan berdasarkan optimasi umur pakai dan biaya pemeliharaan yang dibutuhkan. Penelitian ini bertujuan membangun sistem penunjang keputusan yang mampu mengatur kegiatan pemeliharaan mesin secara berkala serta melakukan analisa biaya pemeliharaan sebagai dampak dari penerapan sistem tersebut. Penelitian dilakukan mengikuti prinsip System Development Life Cycle (SDLC) yakni tahap investigasi sistem, analisa sistem, desain dan pengembangan sistem, dan implementasi sistem. Basis data yang digunakan meliputi basis data daftar mesin produksi, komponen mesin, riwayat kondisi mesin, catatan kegiatan harian mekanik, data produksi benih harian, dan harga komponen mesin. Basis model yang digunakan dalam sistem ini yakni optimasi waktu dan biaya penggantian komponen. Hasil luaran dari sistem berupa jadwal kegiatan setiap periode 4 bulanan. Analisa biaya dilakukan terhadap 10 komponen dari total 294 komponen dalam siklus 3 tahunan diperoleh reduksi biaya pemeliharaan mesin sebesar 54.5%.
- Open Access
- 1 April 2018
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 6 (1) , 1-8
PID Tuning Using Internal Model Controller with Tustin Model Approach
Abstrack PID control is a popular controlling technique in high accuracy control system. PID tuning is a very important stage and affects the reliability of the PID control system. This stage plays a role in determining KP,KI, and KD constants. Currently it has been a lot of PID tuning techniques that have been developed from the Ziegler-Nichols methods. PID Tuning using Internal Model Controller (IMC) by Tustin discrete approached models was used in this study. Open-loop method was used with two variation value of PWM (20% and 80%). The purposes of this study were to determine the PID constants and test those performances using a DC motor. The result of PID tuning process generated two pairs of KP, KI, and KD constants. The first were 0.4013; 0.0988; 0.0176, and the second were 0.2314; 0.0531; 0.044, respectively. The testing results with DC motor showed the performance of the both pairs of PID constants obtained were reliable enough to control motor speed that was characterized by the ability to follow the set-point value that was given and there was no steady state error. There was oscillation at 1500 rpm and 2000 rpm and motor power couldn’t achieve the set-point at 2000 rpm. AbstrakKontrol PID merupakan salah satu teknik pengontrolan yang populer untuk pengontrolan sistem dengan ketelitian tinggi. Terdapat satu tahapan yang sangat penting dan mempengaruhi kehandalan dari sistem kontrol PID yang dihasilkan. Tahapan tersebut adalah penalaan (tuning) PID. Tahapan ini menjadi penting karena berperan dalam penentuan konstanta PID (KP, KI, dan KD). Saat ini telah banyak teknik penalaan PID yang telah dikembangkan dari teknik Ziegler-Nichols. Penalaan PID dengan teknik Internal Model Controller (IMC) melalui pendekatan model discrete Tustin digunakan dalam penelitian ini. Metode openloop dengan teknik pengontrolan PWM dipakai dengan dua variasi nilai PWM yaitu 20% dan 80%. Tujuan penelitian ini adalah menemukan konstanta PID dan menguji performanya dengan motor DC. Dari proses penalaan PID yang dilakukan, diperoleh dua pasang konstanta KP, KI, dan KD. Konstanta pertama masingmasing sebesar 0.4013; 0.0988; dan 0.0176, dan pasangan kedua masing-masing sebesar 0.2314; 0.0531; dan 0.044. Hasil pengujian dengan motor DC memperlihatkan performa konstanta PID yang diperoleh cukup handal dalam mengontrol kecepatan motor yang ditandai oleh kemampuan motor dalam mengikuti nilai set-point yang diberikan dan tidak terjadi steady state error. Akan tetapi terjadi osilasi pada set-point 1500 rpm dan 2000 rpm dan kekuatan motor tidak dapat mencapai set-point 2000 rpm.
- 1 April 2018
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 6 (1) , 1-8
Open AccessPID Tuning Using Internal Model Controller with Tustin Model Approach
Abstrack PID control is a popular controlling technique in high accuracy control system. PID tuning is a very important stage and affects the reliability of the PID control system. This stage plays a role in determining KP,KI, and KD constants. Currently it has been a lot of PID tuning techniques that have been developed from the Ziegler-Nichols methods. PID Tuning using Internal Model Controller (IMC) by Tustin discrete approached models was used in this study. Open-loop method was used with two variation value of PWM (20% and 80%). The purposes of this study were to determine the PID constants and test those performances using a DC motor. The result of PID tuning process generated two pairs of KP, KI, and KD constants. The first were 0.4013; 0.0988; 0.0176, and the second were 0.2314; 0.0531; 0.044, respectively. The testing results with DC motor showed the performance of the both pairs of PID constants obtained were reliable enough to control motor speed that was characterized by the ability to follow the set-point value that was given and there was no steady state error. There was oscillation at 1500 rpm and 2000 rpm and motor power couldn’t achieve the set-point at 2000 rpm. AbstrakKontrol PID merupakan salah satu teknik pengontrolan yang populer untuk pengontrolan sistem dengan ketelitian tinggi. Terdapat satu tahapan yang sangat penting dan mempengaruhi kehandalan dari sistem kontrol PID yang dihasilkan. Tahapan tersebut adalah penalaan (tuning) PID. Tahapan ini menjadi penting karena berperan dalam penentuan konstanta PID (KP, KI, dan KD). Saat ini telah banyak teknik penalaan PID yang telah dikembangkan dari teknik Ziegler-Nichols. Penalaan PID dengan teknik Internal Model Controller (IMC) melalui pendekatan model discrete Tustin digunakan dalam penelitian ini. Metode openloop dengan teknik pengontrolan PWM dipakai dengan dua variasi nilai PWM yaitu 20% dan 80%. Tujuan penelitian ini adalah menemukan konstanta PID dan menguji performanya dengan motor DC. Dari proses penalaan PID yang dilakukan, diperoleh dua pasang konstanta KP, KI, dan KD. Konstanta pertama masingmasing sebesar 0.4013; 0.0988; dan 0.0176, dan pasangan kedua masing-masing sebesar 0.2314; 0.0531; dan 0.044. Hasil pengujian dengan motor DC memperlihatkan performa konstanta PID yang diperoleh cukup handal dalam mengontrol kecepatan motor yang ditandai oleh kemampuan motor dalam mengikuti nilai set-point yang diberikan dan tidak terjadi steady state error. Akan tetapi terjadi osilasi pada set-point 1500 rpm dan 2000 rpm dan kekuatan motor tidak dapat mencapai set-point 2000 rpm.
- Open Access
- 1 October 2015
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 03 (2)
Development of an Integrated Machine for Corn Planting, Fertilizing and Strip Tillage
Pengembangan Mesin Penanam dan Pemupuk Jagung Terintegrasi dengan Pengolahan Tanah Alur
- 1 October 2015
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 03 (2)
Open AccessDevelopment of an Integrated Machine for Corn Planting, Fertilizing and Strip Tillage
Pengembangan Mesin Penanam dan Pemupuk Jagung Terintegrasi dengan Pengolahan Tanah Alur
- Open Access
- 1 October 2015
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 03 (2) , 1-8
Design and Performance Test of Egg Sorting Machine
Desain dan Pengujian Mesin Sortasi Telur Ayam
- 1 October 2015
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 03 (2) , 1-8
Open AccessDesign and Performance Test of Egg Sorting Machine
Desain dan Pengujian Mesin Sortasi Telur Ayam
- Open Access
- 1 April 2015
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 03 (1) , 1-8
Evaluation of Driving System and Modification of Corn Planter Powered by Hand Tractor
Evaluasi Sistem Penggerak dan Modifikasi Mesin Penanam Jagung Bertenaga Traktor Tangan
- 1 April 2015
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 03 (1) , 1-8
Open AccessEvaluation of Driving System and Modification of Corn Planter Powered by Hand Tractor
Evaluasi Sistem Penggerak dan Modifikasi Mesin Penanam Jagung Bertenaga Traktor Tangan
- Open Access
- 1 October 2014
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 02 (2)
Mechanism of Oil Palm Fresh Fruit Bunches Catchment and Its Potential EnergyUtilization
Mekanisme Penangkap Tandan Buah Sawit dan Pemanfaatan Energi Potensialnya
- 1 October 2014
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 02 (2)
Open AccessMechanism of Oil Palm Fresh Fruit Bunches Catchment and Its Potential EnergyUtilization
Mekanisme Penangkap Tandan Buah Sawit dan Pemanfaatan Energi Potensialnya
- Open Access
- 1 April 2014
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 02 (1)
Design and Performance of Paddle Wheel Aerator Development
Perkembangan Desain dan Kinerja Aerator Tipe Kincir
- 1 April 2014
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 02 (1)
Open AccessDesign and Performance of Paddle Wheel Aerator Development
Perkembangan Desain dan Kinerja Aerator Tipe Kincir
- Open Access
- 1 October 2012
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 26 (2)
Working Performance of Motor Sprayer on Foliar Fertilizer Application in a Sugarcane Plantation
Kinerja Sprayer Bermotor dalam Aplikasi Pupuk Daun di Perkebunan Tebu
- 1 October 2012
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 26 (2)
Open AccessWorking Performance of Motor Sprayer on Foliar Fertilizer Application in a Sugarcane Plantation
Kinerja Sprayer Bermotor dalam Aplikasi Pupuk Daun di Perkebunan Tebu
- Open Access
- 1 April 2011
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 25 (1)
Desain Improvement of Corn Planter and Fertilizer Applicator Powered by Hand Tractor
Abstract A prototype of integrated machine for tillage, planting and fertilizer application for corn cultivation powered by hand tractor was modified to improve the planting and fertilizing performances. The fertilizer hopper was redesigned and separated to be two hoppers for urea, and for a mixture of TSP and KCl. The hoppers which had a bigger capacity were placed on left and right sides of the machine. For a better arrangement, the seed hopper was set on the middle part between the fertilizer hoppers. The rotor of fertilizer metering device were redesigned to become an edge cell type rotor, and equipped with a metering cylinder. Materials of the driving wheel were changed by thinner and lighter materials. To improve its driving force, the wheel was equipped by radial lugs and side rims which were set on the main rim. The stationer test result showed that the fertilizer application rate could be varied by setting the rotor opening of the metering device. Capacity of the fertilizer hopper was increased from 5 kg to 12 kg. By modification, the machine weight could be decreased and the vertical load on the handle of the tiller could be decreased from 50 kg (the first prototype) to 31 kg (modified prototype). The application of urea, TSP and KCl could be carried out well, in proper dosage. The theoretical field capacity of the modified prototype was 0.16 ha/hour, and the effective field capacity was 0.13 ha/hour. Keywords: integrated machine, corn planter, fertilizer applicator, modification, performance Abstrak Prototipe mesin pengolah tanah, penanam dan pemupuk jagung terintegrasi dengan tenaga traktor tangan telah dimodifikasi untuk meningkatkan kinerja pananaman dan pemupukannya. Hoper pupuk didesain ulang dan dibagi dua untuk menampung pupuk urea dan campuran pupuk TSP dan KCl. Hoper pupuk dengan kapasitas lebih besar ditempatkan di bagian sisi kiri dan kanan dari mesin. Untuk susunan yang seimbang, hoper benih ditempatkan di tengahnya. Rotor penjatah pupuk dirancang ulang menjadi rotor tipe edge-cell, dan dilengkapi selubung pengatur penjatahan pupuk. Bahan roda penggerak dipertipis dan diperingan. Untuk meningkatkan kemampuan gerak memutarnya, roda tersebut dilengkapi dengan sirip-sirip radial dan pelek samping. Hasil pengujian stasioner menunjukkan bahwa penjatahan pupuk dapat diatur dengan mudah. Kapasitas hoper pupuk meningkat dari 5 kg menjadi 12 kg. Bobot mesin dapat dikurangi, sehingga beban angkat pada stang traktor berkurang dari 50 kg menjadi 31 kg. Pemupukan urea, TSP+KCl dapat dilakukan dengan dosis yang sesuai. Kapasitas lapangan teoritis mesin hasil modifikasi adalah 0.16 ha/jam dan kapasitas lapangan efektifnya adalah 0.13 ha/jam. Kata kunci: mesin terintegrasi, penanam jagung, pemupuk, modifikasi, kinerja Diterima: 23 Agustus 2010; Disetujui: 11 Januari 2011
- 1 April 2011
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 25 (1)
Open AccessDesain Improvement of Corn Planter and Fertilizer Applicator Powered by Hand Tractor
Abstract A prototype of integrated machine for tillage, planting and fertilizer application for corn cultivation powered by hand tractor was modified to improve the planting and fertilizing performances. The fertilizer hopper was redesigned and separated to be two hoppers for urea, and for a mixture of TSP and KCl. The hoppers which had a bigger capacity were placed on left and right sides of the machine. For a better arrangement, the seed hopper was set on the middle part between the fertilizer hoppers. The rotor of fertilizer metering device were redesigned to become an edge cell type rotor, and equipped with a metering cylinder. Materials of the driving wheel were changed by thinner and lighter materials. To improve its driving force, the wheel was equipped by radial lugs and side rims which were set on the main rim. The stationer test result showed that the fertilizer application rate could be varied by setting the rotor opening of the metering device. Capacity of the fertilizer hopper was increased from 5 kg to 12 kg. By modification, the machine weight could be decreased and the vertical load on the handle of the tiller could be decreased from 50 kg (the first prototype) to 31 kg (modified prototype). The application of urea, TSP and KCl could be carried out well, in proper dosage. The theoretical field capacity of the modified prototype was 0.16 ha/hour, and the effective field capacity was 0.13 ha/hour. Keywords: integrated machine, corn planter, fertilizer applicator, modification, performance Abstrak Prototipe mesin pengolah tanah, penanam dan pemupuk jagung terintegrasi dengan tenaga traktor tangan telah dimodifikasi untuk meningkatkan kinerja pananaman dan pemupukannya. Hoper pupuk didesain ulang dan dibagi dua untuk menampung pupuk urea dan campuran pupuk TSP dan KCl. Hoper pupuk dengan kapasitas lebih besar ditempatkan di bagian sisi kiri dan kanan dari mesin. Untuk susunan yang seimbang, hoper benih ditempatkan di tengahnya. Rotor penjatah pupuk dirancang ulang menjadi rotor tipe edge-cell, dan dilengkapi selubung pengatur penjatahan pupuk. Bahan roda penggerak dipertipis dan diperingan. Untuk meningkatkan kemampuan gerak memutarnya, roda tersebut dilengkapi dengan sirip-sirip radial dan pelek samping. Hasil pengujian stasioner menunjukkan bahwa penjatahan pupuk dapat diatur dengan mudah. Kapasitas hoper pupuk meningkat dari 5 kg menjadi 12 kg. Bobot mesin dapat dikurangi, sehingga beban angkat pada stang traktor berkurang dari 50 kg menjadi 31 kg. Pemupukan urea, TSP+KCl dapat dilakukan dengan dosis yang sesuai. Kapasitas lapangan teoritis mesin hasil modifikasi adalah 0.16 ha/jam dan kapasitas lapangan efektifnya adalah 0.13 ha/jam. Kata kunci: mesin terintegrasi, penanam jagung, pemupuk, modifikasi, kinerja Diterima: 23 Agustus 2010; Disetujui: 11 Januari 2011
- Open Access
- 1 April 2010
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 24 (1) , 7-16
Performance of A Movable lug With Spring Mechanism
Two sets of movable lug wheel with spring mechanism for hand tractors have been designed and tested. The wheels were set on local hand tractors and tested for tilling paddy fields in Cianjur and Subang districts, West Java. A local fixed lug wheel was also tested in each location. The movable lug wheel for Cianjur location was equipped with a pair of coiled type torsion springs on each lug, while the movable lug wheel for Subang location was equipped with a shaft type torsion spring on each lug. Field performances: theoretical and actual field capacities, wheel slip, and wheel shrinkage, were measured during the test. The test result in Cianjur showed that the movable lug wheel had a better traction performance than the fixed lug wheel. The average wheel slip of the movable lug wheel was 11.54%, while the average wheel slip of the fixed lug wheel was 20.89%. Field efficiency of the movable lug wheel was 76.33%, which was bigger than the fixed lug wheel (68.45%). However, the test result using shaft type torsion springs in Subang showed that the spring mechanism did not work well, and the spring mechanism should be modified on its torsion-shaft diameter and welding strength. Keywords: lug wheel, movable lug, field performance, torsion spring, tillage Diterima: 6 November 2009; Disetujui: 29 Maret 2010
- 1 April 2010
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 24 (1) , 7-16
Open AccessPerformance of A Movable lug With Spring Mechanism
Two sets of movable lug wheel with spring mechanism for hand tractors have been designed and tested. The wheels were set on local hand tractors and tested for tilling paddy fields in Cianjur and Subang districts, West Java. A local fixed lug wheel was also tested in each location. The movable lug wheel for Cianjur location was equipped with a pair of coiled type torsion springs on each lug, while the movable lug wheel for Subang location was equipped with a shaft type torsion spring on each lug. Field performances: theoretical and actual field capacities, wheel slip, and wheel shrinkage, were measured during the test. The test result in Cianjur showed that the movable lug wheel had a better traction performance than the fixed lug wheel. The average wheel slip of the movable lug wheel was 11.54%, while the average wheel slip of the fixed lug wheel was 20.89%. Field efficiency of the movable lug wheel was 76.33%, which was bigger than the fixed lug wheel (68.45%). However, the test result using shaft type torsion springs in Subang showed that the spring mechanism did not work well, and the spring mechanism should be modified on its torsion-shaft diameter and welding strength. Keywords: lug wheel, movable lug, field performance, torsion spring, tillage Diterima: 6 November 2009; Disetujui: 29 Maret 2010