Desrial Desrial
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Desrial Desrial has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Fakultas Teknologi Pertanian Departemen Teknik Mesin Dan Biosistem
Institut Pertanian Bogor Program Pascasarjana Manajemen dan Bisnis
5 shared publications - Dyah Wulandani
Institut Pertanian Bogor Departemen Teknik Mesin dan Biosistem Institut Pertanian Bogor Departemen Teknik Mesin dan Biosistem Institut Pertanian Bogor Y Aris Purwanto Fakultas Teknologi Pertanian Fakultas Teknologi Pertanian
2 shared publications - Wawan Hermawan
Institut Pertanian Bogor
2 shared publications Fakultas Teknologi Pertanian Staf Pengajar Departemen Teknik Pertanian
1 shared publicationFandra Wiratama
Alumnus Departemen Teknik Mesin dan Biosistem Fakultas Teknologi Pertanian IPB Bogor
1 shared publication- Feby Nopriandi
Program Studi Teknik Mesin Pertanian dan Pangan, Institut Pertanian Bogor
1 shared publication
Latest Publications
- Open Access
- 1 August 2018
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 6 (2) , 195-202
Kinerja Roda Besi Bersirip Multi-Angle untuk Lahan Sawah Terasering
Kinerja Roda Besi Bersirip Multi-Angle untuk Lahan Sawah Terasering
- 1 August 2018
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 6 (2) , 195-202
Open AccessKinerja Roda Besi Bersirip Multi-Angle untuk Lahan Sawah Terasering
Kinerja Roda Besi Bersirip Multi-Angle untuk Lahan Sawah Terasering
- Open Access
- 1 October 2015
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 03 (2) , 1-8
Design and Performance Test of Egg Sorting Machine
Desain dan Pengujian Mesin Sortasi Telur Ayam
- 1 October 2015
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 03 (2) , 1-8
Open AccessDesign and Performance Test of Egg Sorting Machine
Desain dan Pengujian Mesin Sortasi Telur Ayam
- Open Access
- 1 October 2014
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 2 (2) , 89-95
Specific Cutting Force Analysis of Young Coconut Husk (Cocos nucifera)
To design a young coconut trimming machine, it’s important to analyze the cutting mechanism of young coconut husk. The aim of this study were to analyze the cutting mechanism of young coconut husk and generate mathematical model of specific cutting force. Sharpening angle, cutting angle and sharpened knife were optimized to get the lowest cutting force. Mathematical model has been generated to estimate the maximum cutting force for one side sharpened knife and two side sharpened knife with cutting angle (θ) at 0Oand above 0O. Based on the analysis of this study, the type of knife that require the lowest cutting force is two side sharpened knife with sharpening angle (β) = 10O and cutting angle (θ)= 30O.Keywords : coconut husk , cutting angle, cutting force, knife, mathematical model.AbstrakUntuk merancang alat trimming kelapa muda, penting untuk melakukan analisis mekanisme pemotongan sabut kelapa muda. Tujuan dari penelitian ini adalah untuk menganalisis mekanisme pemotongan sabutkelapa muda dan membangun model matematika pendugaan gaya spesifik pemotongan. Variasi faktor sudut ketajaman, sudut potong, dan sisi mata pisau dioptimalkan untuk menghasilkan gaya potong terendah.Model matematika telah dibangun untuk menduga gaya pemotongan maksimum untuk pisau satu sisi menajam dan dua sisi menajam dengan sudut potong (θ) 0O dan diatas 0O. Dari hasil penelitian disimpulkanbahwa jenis pisau yang menghasilkan gaya pemotongan terendah adalah pisau dua sisi menajam dengan sudut ketajaman 10O dan sudut potong 30O.Kata kunci: gaya pemotongan, model matematika, pisau, sabut kelapa, sudut potong.Diterima: 13 Maret 2014; Disetujui:10 Juli 2014
- 1 October 2014
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 2 (2) , 89-95
Open AccessSpecific Cutting Force Analysis of Young Coconut Husk (Cocos nucifera)
To design a young coconut trimming machine, it’s important to analyze the cutting mechanism of young coconut husk. The aim of this study were to analyze the cutting mechanism of young coconut husk and generate mathematical model of specific cutting force. Sharpening angle, cutting angle and sharpened knife were optimized to get the lowest cutting force. Mathematical model has been generated to estimate the maximum cutting force for one side sharpened knife and two side sharpened knife with cutting angle (θ) at 0Oand above 0O. Based on the analysis of this study, the type of knife that require the lowest cutting force is two side sharpened knife with sharpening angle (β) = 10O and cutting angle (θ)= 30O.Keywords : coconut husk , cutting angle, cutting force, knife, mathematical model.AbstrakUntuk merancang alat trimming kelapa muda, penting untuk melakukan analisis mekanisme pemotongan sabut kelapa muda. Tujuan dari penelitian ini adalah untuk menganalisis mekanisme pemotongan sabutkelapa muda dan membangun model matematika pendugaan gaya spesifik pemotongan. Variasi faktor sudut ketajaman, sudut potong, dan sisi mata pisau dioptimalkan untuk menghasilkan gaya potong terendah.Model matematika telah dibangun untuk menduga gaya pemotongan maksimum untuk pisau satu sisi menajam dan dua sisi menajam dengan sudut potong (θ) 0O dan diatas 0O. Dari hasil penelitian disimpulkanbahwa jenis pisau yang menghasilkan gaya pemotongan terendah adalah pisau dua sisi menajam dengan sudut ketajaman 10O dan sudut potong 30O.Kata kunci: gaya pemotongan, model matematika, pisau, sabut kelapa, sudut potong.Diterima: 13 Maret 2014; Disetujui:10 Juli 2014
- Open Access
- 1 April 2014
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 02 (1)
Design of Biogas Converter for Single Cylinder Gasoline Engine
The need for energy continues to increase along with the increase of population in Indonesia. This is in contrast with the fact that the main oil energy source is reducing day by. To overcome this problem renewable energy sources such as biogas becomes very important. Methane content in the biogas ranged between 60-65 %, where the value is large enough to be used as an energy source replacement of gasoline. The purpose of this study is to design a converter that is capable to perform biogas and air mixing for optimum use of biogas in gasoline engine. The main parts of biogas converter are the venturi, choke valves , throttle valves, as well as the coupler to the engine. Testing was done by applying converter on a gasoline engine with biogas fuel. Engine performance was tested using a dynamometer and the results are compared with the performance of the motor using gasoline fuel. Test results show that the optimal power is achieved at 0979 kW at 3146 rpm and a torque of 4.3 Nm, while the motor power with gasoline kW and a torque of 1.86 Nm at 6:21. Keywords: renewable energy, biogas, converter, gasoline engine, agricultural machinery Abstrak Kebutuhan energi terus meningkat seiring dengan bertambahnya jumlah penduduk di Indonesia. Hal ini berkebalikan dengan kenyataan bahwa sumber energi utama kita sehari - hari, yaitu minyak bumi terus menipis. Untuk mengatasi kelangkaan ini diperlukan adanya sumber energi baru dan terbarukan, salah satunya biogas. Kandungan metana dalam biogas berkisar antara 60 - 65 %, dimana nilai ini cukup besaruntuk dijadikan sebagai sumber energi pengganti bahan bakar bensin. Tujuan dari penelitian ini adalah merancang sebuah konverter yang mampu mencampur biogas dan udara dengan campuran yang tepatdan agar motor bensin mampu beroperasi dengan bahan bakar biogas secara optimal. Konverter yang dirancang memiliki bagian - bagian utama yaitu venturi, selongsong venturi, katup choke, katup throttle, serta dudukan. Pengujian konverter dilakukan dengan cara memasangkan konverter pada motor bensin 4 tak dan menjalankan motor dengan bahan bakar biogas. Selanjutnya motor diuji kinerjanya menggunakandinamometer dan hasilnya dibandingkan dengan kinerja motor menggunakan bahan bakar bensin. Hasil pengujian menunjukkan daya optimal yang dicapai sebesar 0.98 kW pada 3146 rpm dan torsi sebesar 4.31 Nm, sementara daya motor dengan bahan bakar bensin sebesar 1.86 kW dan torsi sebesar 6.21 Nm.Kata kunci: energi terbarukan, biogas, konverter, motor bensin, alat mesin pertanian Diterima: 01 Oktober 2013; Disetujui: 07 Januari 2014
- 1 April 2014
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 02 (1)
Open AccessDesign of Biogas Converter for Single Cylinder Gasoline Engine
The need for energy continues to increase along with the increase of population in Indonesia. This is in contrast with the fact that the main oil energy source is reducing day by. To overcome this problem renewable energy sources such as biogas becomes very important. Methane content in the biogas ranged between 60-65 %, where the value is large enough to be used as an energy source replacement of gasoline. The purpose of this study is to design a converter that is capable to perform biogas and air mixing for optimum use of biogas in gasoline engine. The main parts of biogas converter are the venturi, choke valves , throttle valves, as well as the coupler to the engine. Testing was done by applying converter on a gasoline engine with biogas fuel. Engine performance was tested using a dynamometer and the results are compared with the performance of the motor using gasoline fuel. Test results show that the optimal power is achieved at 0979 kW at 3146 rpm and a torque of 4.3 Nm, while the motor power with gasoline kW and a torque of 1.86 Nm at 6:21. Keywords: renewable energy, biogas, converter, gasoline engine, agricultural machinery Abstrak Kebutuhan energi terus meningkat seiring dengan bertambahnya jumlah penduduk di Indonesia. Hal ini berkebalikan dengan kenyataan bahwa sumber energi utama kita sehari - hari, yaitu minyak bumi terus menipis. Untuk mengatasi kelangkaan ini diperlukan adanya sumber energi baru dan terbarukan, salah satunya biogas. Kandungan metana dalam biogas berkisar antara 60 - 65 %, dimana nilai ini cukup besaruntuk dijadikan sebagai sumber energi pengganti bahan bakar bensin. Tujuan dari penelitian ini adalah merancang sebuah konverter yang mampu mencampur biogas dan udara dengan campuran yang tepatdan agar motor bensin mampu beroperasi dengan bahan bakar biogas secara optimal. Konverter yang dirancang memiliki bagian - bagian utama yaitu venturi, selongsong venturi, katup choke, katup throttle, serta dudukan. Pengujian konverter dilakukan dengan cara memasangkan konverter pada motor bensin 4 tak dan menjalankan motor dengan bahan bakar biogas. Selanjutnya motor diuji kinerjanya menggunakandinamometer dan hasilnya dibandingkan dengan kinerja motor menggunakan bahan bakar bensin. Hasil pengujian menunjukkan daya optimal yang dicapai sebesar 0.98 kW pada 3146 rpm dan torsi sebesar 4.31 Nm, sementara daya motor dengan bahan bakar bensin sebesar 1.86 kW dan torsi sebesar 6.21 Nm.Kata kunci: energi terbarukan, biogas, konverter, motor bensin, alat mesin pertanian Diterima: 01 Oktober 2013; Disetujui: 07 Januari 2014
- Open Access
- 1 April 2010
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 24 (1)
Performance Evaluation of The Hand Tractor pull With Pure Coconut Oil Fuel
Past research shown that coconut oil can be used directly in Diesel engine by adding a heating element in the fuel delivery system. This study aims to evaluate the performance of a hand tractor pull using pure coconut oil fuel. The Diesel engine of the tractor was equipped with a fuel heater installed on the mufler. Traction performance parameters tested were wheel slippage, drawbar pull, forward speed and drawbar power on the path of concrete and soil. Besides, the tractor was also tested on plowing using a moldboard plow. The test results on the concrete track showed that the maximum drawbar pull was 1.21 kN generated at a speed of 0.92 m/s, with a maximum drawbar power of 1.21 kW at the wheel slip of 10.87%. While the drawbar pull on the soil track was 1.37 kN at a speed of 0.79 m/s, with a maximum value of 0.71 kW drawbar power when wheels slip 22.25%. The results of tillage test showed that field efficiency was 84.66%, which was not much different from the test result using Diesel fuel. Keywords: fuel heater, Diesel engine, pure coconut oil, drawbar pull performance Diterima: 8 Desember 2009; Disetujui: 16 Maret 2010
- 1 April 2010
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 24 (1)
Open AccessPerformance Evaluation of The Hand Tractor pull With Pure Coconut Oil Fuel
Past research shown that coconut oil can be used directly in Diesel engine by adding a heating element in the fuel delivery system. This study aims to evaluate the performance of a hand tractor pull using pure coconut oil fuel. The Diesel engine of the tractor was equipped with a fuel heater installed on the mufler. Traction performance parameters tested were wheel slippage, drawbar pull, forward speed and drawbar power on the path of concrete and soil. Besides, the tractor was also tested on plowing using a moldboard plow. The test results on the concrete track showed that the maximum drawbar pull was 1.21 kN generated at a speed of 0.92 m/s, with a maximum drawbar power of 1.21 kW at the wheel slip of 10.87%. While the drawbar pull on the soil track was 1.37 kN at a speed of 0.79 m/s, with a maximum value of 0.71 kW drawbar power when wheels slip 22.25%. The results of tillage test showed that field efficiency was 84.66%, which was not much different from the test result using Diesel fuel. Keywords: fuel heater, Diesel engine, pure coconut oil, drawbar pull performance Diterima: 8 Desember 2009; Disetujui: 16 Maret 2010
- Open Access
- 1 April 2009
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 23 (1)
Mechanical Method for Making Planting Beds by Using Two Wheel Tractor for Vegetable Cultivation
Metode Pembuatan Guludan Secara Mekanis denganTenaga Penggerak Traktor Dua Roda untuk Budidaya Tanaman Sayuran
- 1 April 2009
- Published by Department of Mechanical and Biosystem Engineering IPB in Jurnal Keteknikan Pertanian
- Vol. 23 (1)
Open AccessMechanical Method for Making Planting Beds by Using Two Wheel Tractor for Vegetable Cultivation
Metode Pembuatan Guludan Secara Mekanis denganTenaga Penggerak Traktor Dua Roda untuk Budidaya Tanaman Sayuran