Mykola Ruchynskyi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mykola Ruchynskyi has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Ivan Nazarenko
Kyiv National University of Construction and Architecture
6 shared publications - Oleg Dedov
Kyiv National University of Construction and Architecture
5 shared publications - Andrii Zapryvoda
Kyiv National University of Construction and Architecture
4 shared publications - Andrii Bondarenko
Odesa State Academy of Civil Engineering and Architecture
3 shared publications - Iryna Bernyk
National University of Life and Environmental Sciences of Ukraine
3 shared publications - Yevhen Mishchuk
Kyiv National University of Construction and Architecture
3 shared publications
Latest Publications
- Open Access
- 30 October 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (1 (137)) , 55-65
Determining the rational energy level for processing environments of different structures
Vibration processing underlies many technological processes in various sectors of the national economy. The object of the study is a single common wave process of motion of the system, and the subject is the parameters and modes that provide a rational level of energy. At the same time, attention is focused on the use of energy-saving technologies. Most processes use energy-consuming technologies and equipment, the calculations of which are based on the application of formulas for determining energy on discrete and empirical dependencies. Such approaches do not reveal the essence of the material processing processes and cannot accurately estimate energy costs. This problem is solved in the work by determining the parameters and modes based on the conditions for implementing the synergy of the “vibration exciter – processing medium” system. This is the peculiarity and difference of the obtained research results. Discrete-continuous models have been developed taking into account the rheological properties of the media, and analytical solutions and experimental studies have allowed to determine the parameters of low-frequency and high-frequency actions on the processing medium. The work uses a method by which the combination of frequency and amplitude of vibrations determines the intensity of the vibration effect on the processing environment. The resistance of the technological environment to the movement of the working body of the vibration exciter, which consisted of inertial, elastic and dissipative parts, was determined. The study determined the qualitative and quantitative picture of the change in energy dissipation in specific materials and environments under different laws of their loading and processing. The energy level for processing technological environments in low-frequency and high-frequency modes was determined. The research methodology and analytical dependence of energy determination can be used for various environments under load
- 30 October 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (1 (137)) , 55-65
Open AccessDetermining the rational energy level for processing environments of different structures
Vibration processing underlies many technological processes in various sectors of the national economy. The object of the study is a single common wave process of motion of the system, and the subject is the parameters and modes that provide a rational level of energy. At the same time, attention is focused on the use of energy-saving technologies. Most processes use energy-consuming technologies and equipment, the calculations of which are based on the application of formulas for determining energy on discrete and empirical dependencies. Such approaches do not reveal the essence of the material processing processes and cannot accurately estimate energy costs. This problem is solved in the work by determining the parameters and modes based on the conditions for implementing the synergy of the “vibration exciter – processing medium” system. This is the peculiarity and difference of the obtained research results. Discrete-continuous models have been developed taking into account the rheological properties of the media, and analytical solutions and experimental studies have allowed to determine the parameters of low-frequency and high-frequency actions on the processing medium. The work uses a method by which the combination of frequency and amplitude of vibrations determines the intensity of the vibration effect on the processing environment. The resistance of the technological environment to the movement of the working body of the vibration exciter, which consisted of inertial, elastic and dissipative parts, was determined. The study determined the qualitative and quantitative picture of the change in energy dissipation in specific materials and environments under different laws of their loading and processing. The energy level for processing technological environments in low-frequency and high-frequency modes was determined. The research methodology and analytical dependence of energy determination can be used for various environments under load
- Open Access
- 4 February 2025
- Published by Kyiv National University of Construction and Architecture in Construction Engineering
- No. 41,p. 4-11
SCIENTIFIC ASPECTS OF SUBSTANTIATION OF ENGINEERING OF LOGISTICS SYSTEMS OF THE CONSTRUCTION INDUSTRY WITHIN THE FRAMEWORK OF THE SPECIALTY "APPLIED MECHANICS"
The article presents the results of substantiating the place and definition of machines and processes of the construction industry, united in accordance with the specialization of logistics systems engineering of the specialty of applied mechanics. An analysis of existing definitions of the phrase "logistics system" was car-ried out with an assessment of the term "system" in the context of engineering of logistics systems of ma-chines and processes of the construction industry. This is due to the fact that logistics systems are included in the generally accepted concept of "system", because they consist of system-forming elements, closely interconnected and interdependent with each other, which have ordered connections and form a certain struc-ture with predetermined properties. Most of the schemes that implement material flows during crushing, sort-ing, mixing, stacking and compaction are of this type.
- 4 February 2025
- Published by Kyiv National University of Construction and Architecture in Construction Engineering
- No. 41,p. 4-11
Open AccessSCIENTIFIC ASPECTS OF SUBSTANTIATION OF ENGINEERING OF LOGISTICS SYSTEMS OF THE CONSTRUCTION INDUSTRY WITHIN THE FRAMEWORK OF THE SPECIALTY "APPLIED MECHANICS"
The article presents the results of substantiating the place and definition of machines and processes of the construction industry, united in accordance with the specialization of logistics systems engineering of the specialty of applied mechanics. An analysis of existing definitions of the phrase "logistics system" was car-ried out with an assessment of the term "system" in the context of engineering of logistics systems of ma-chines and processes of the construction industry. This is due to the fact that logistics systems are included in the generally accepted concept of "system", because they consist of system-forming elements, closely interconnected and interdependent with each other, which have ordered connections and form a certain struc-ture with predetermined properties. Most of the schemes that implement material flows during crushing, sort-ing, mixing, stacking and compaction are of this type.
- Open Access
- 27 December 2024
- Published by Igor Sikorsky Kyiv Polytechnic Institute in International Scientific and Technical conference "The Progressive Technics, Technology and Engineering Education"
- No. XXIV,p. 147-148
Research of energy-saving vibrating machines for technological purposes
The motion of vibrating machines that realize different forms of oscillations for the processes of grinding and compaction of materials and building mixtures is investigated. The equations and analytical formulas for determining the technological and energy indicators were developed. The obtained results made it possible to analyze and identify the modes of operation of the vibration system using the internal energy of the system and directing it to improve the efficiency of the workflow.
- 27 December 2024
- Published by Igor Sikorsky Kyiv Polytechnic Institute in International Scientific and Technical conference "The Progressive Technics, Technology and Engineering Education"
- No. XXIV,p. 147-148
Open AccessResearch of energy-saving vibrating machines for technological purposes
The motion of vibrating machines that realize different forms of oscillations for the processes of grinding and compaction of materials and building mixtures is investigated. The equations and analytical formulas for determining the technological and energy indicators were developed. The obtained results made it possible to analyze and identify the modes of operation of the vibration system using the internal energy of the system and directing it to improve the efficiency of the workflow.
- Open Access
- 30 October 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (7 (131)) , 34-43
Identifying the parameters and operation modes of the cavitation apparatus taking into account the influence of the processing material
The object of this study is dynamic pressure that takes into account the main parameters of technological process. Under real conditions of cavitation apparatus operation, a discrepancy between actual and calculated parameters of 30–50 % was found, which significantly reduces the efficiency and quality of material processing. The problem was solved through a joint study of the movement of the acoustic apparatus and the technological environment as a single structured system taking into account the influence of materials. This is a peculiarity of the approach and distinctive features of the results in comparison with existing ones, in which the research was conducted separately for the processing material and the cavitation apparatus. The model proposed in the work reflects the elastic, inertial, and dissipative parameters in the equations of motion, provided that their changes are taken into account, both in the acoustic apparatus and in the technological material. This approach has made it possible to reveal the physical essence of the interaction and analytically describe their joint movement. The resulting analytical dependences made it possible to calculate and propose numerical values of vibration amplitudes in the range of 4.0...20.0 μm, sound pressure values in the range of 5.0...30.0∙105 Pa for media with a viscosity of (10–200)∙10-3 Pa∙s. With the set value of the amplitude, it is possible to assign the necessary parameters for the implementation of the cavitation process. The developed calculation algorithm ensures the reliability of the accepted models and parameters of the cavitation apparatus. The proposed approach of joint study of the movement of the acoustic apparatus and the environment is expedient to use for the practical implementation of ultrasonic treatment. In particular, such processes as dispersion, emulsification, mixing, extraction, and others, in order to increase their efficiency
- 30 October 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (7 (131)) , 34-43
Open AccessIdentifying the parameters and operation modes of the cavitation apparatus taking into account the influence of the processing material
The object of this study is dynamic pressure that takes into account the main parameters of technological process. Under real conditions of cavitation apparatus operation, a discrepancy between actual and calculated parameters of 30–50 % was found, which significantly reduces the efficiency and quality of material processing. The problem was solved through a joint study of the movement of the acoustic apparatus and the technological environment as a single structured system taking into account the influence of materials. This is a peculiarity of the approach and distinctive features of the results in comparison with existing ones, in which the research was conducted separately for the processing material and the cavitation apparatus. The model proposed in the work reflects the elastic, inertial, and dissipative parameters in the equations of motion, provided that their changes are taken into account, both in the acoustic apparatus and in the technological material. This approach has made it possible to reveal the physical essence of the interaction and analytically describe their joint movement. The resulting analytical dependences made it possible to calculate and propose numerical values of vibration amplitudes in the range of 4.0...20.0 μm, sound pressure values in the range of 5.0...30.0∙105 Pa for media with a viscosity of (10–200)∙10-3 Pa∙s. With the set value of the amplitude, it is possible to assign the necessary parameters for the implementation of the cavitation process. The developed calculation algorithm ensures the reliability of the accepted models and parameters of the cavitation apparatus. The proposed approach of joint study of the movement of the acoustic apparatus and the environment is expedient to use for the practical implementation of ultrasonic treatment. In particular, such processes as dispersion, emulsification, mixing, extraction, and others, in order to increase their efficiency
- Open Access
- 28 December 2023
- Published by Kyiv National University of Construction and Architecture in Construction Engineering
- No. 2(39),p. 40-46
DETERMINATION OF ELASTIC CHARACTERISTICS OF BUILDING INDUSTRY VIBRATION SYSTEMS
The design of the difficult dynamic systems is examined with removable descriptions ofresilient elements and analytical dependences are got for realization of multimode resonances and the card ofstability of vibration of shock machines is offered.
- 28 December 2023
- Published by Kyiv National University of Construction and Architecture in Construction Engineering
- No. 2(39),p. 40-46
Open AccessDETERMINATION OF ELASTIC CHARACTERISTICS OF BUILDING INDUSTRY VIBRATION SYSTEMS
The design of the difficult dynamic systems is examined with removable descriptions ofresilient elements and analytical dependences are got for realization of multimode resonances and the card ofstability of vibration of shock machines is offered.
- Open Access
- 30 July 2023
- Published by Ukrainian Research and Design Institute of Building Materials and Products in Sworld-Us Conference proceedings
- No. usc38-00,p. 30-42
LOGISTICS SYSTEMS IN CONSTRUCTION AND MECHANICAL ENGINEERING: INTEGRATION OF PROCESSES, DIGITAL TECHNOLOGIES AND PERFORMANCE EVALUATION
The article investigates the development of logistics systems in construction and mechanical engineering under conditions of digital transformation of production processes. The necessity of integrating material, information and financial flows as a basis
- 30 July 2023
- Published by Ukrainian Research and Design Institute of Building Materials and Products in Sworld-Us Conference proceedings
- No. usc38-00,p. 30-42
Open AccessLOGISTICS SYSTEMS IN CONSTRUCTION AND MECHANICAL ENGINEERING: INTEGRATION OF PROCESSES, DIGITAL TECHNOLOGIES AND PERFORMANCE EVALUATION
The article investigates the development of logistics systems in construction and mechanical engineering under conditions of digital transformation of production processes. The necessity of integrating material, information and financial flows as a basis
- Open Access
- 28 June 2023
- Published by Kyiv National University of Construction and Architecture in Construction Engineering
- No. 1(38),p. 18-24
RESEARCH AND DETERMINATION OF BASIC PARAMETERS OF VIBROSHOCK MODE OF PRODUCTION OF FUNDAMENTAL BLOCKS
The construction of vibrofluidizer shaping of fundamental blocks is offered in shock-oscillation office hours with formwork and removal of the finished product after completion of process of his compression. The regularities of the movement of vibro-impact units, taking into account the influence of the dynamic parameters of the mixture with a product height of 0.6 m, were revealed, and analytical dependen-cies were obtained to ensure the stabilization of the dynamic parameters of the vibrating machine, which works in the resonance mode with purposeful consideration of the internal oscillatory properties of the vibrat-ing system. The calculation and mathematical model of setting is certain. Worked out equations of motion and the areas of stability are investigational. An algorithm and method of calculation of basic parameters of the shock-oscillation setting is developed. The main provisions for the creation of vibro-impact machines for the formation of foundation blocks have been formulated. Numerical values of the dynamic parameters of the working body and the environment were obtained, which can be used in the design of similar vibro-impact systems. Запропонована конструкція віброустановки для формування фундаментних блоків в ударно-вібраційному режиму роботи із розпалубкою та зніманням готового виробу після завершення процесу його ущільнення. Розкриті закономірності руху віброударних установок з урахуванням впливу динамічних параметрів суміші із висотою виробу 0,6 м та отримані аналітичні залежності для забезпечення стабілізації динамічних параметрів вібромашини, яка працює в резонансному режимі з цілеспрямованим врахуванням внутрішніх коливальних властивостей вібросистеми. Визначена розрахункова та математична модель установки. Складені рівняння руху та досліджені зони стійкості. Розроблено алгоритм та методика розрахунку основних параметрів ударно-вібраційної установки. Сформульовано основні положення для створення віброударних машин для формування фундаментних блоків. Отримано числові значення динамічних параметрів робочого органу і середовища, які можна використовувати при проектуванні подібних віброударних систем.
- 28 June 2023
- Published by Kyiv National University of Construction and Architecture in Construction Engineering
- No. 1(38),p. 18-24
Open AccessRESEARCH AND DETERMINATION OF BASIC PARAMETERS OF VIBROSHOCK MODE OF PRODUCTION OF FUNDAMENTAL BLOCKS
The construction of vibrofluidizer shaping of fundamental blocks is offered in shock-oscillation office hours with formwork and removal of the finished product after completion of process of his compression. The regularities of the movement of vibro-impact units, taking into account the influence of the dynamic parameters of the mixture with a product height of 0.6 m, were revealed, and analytical dependen-cies were obtained to ensure the stabilization of the dynamic parameters of the vibrating machine, which works in the resonance mode with purposeful consideration of the internal oscillatory properties of the vibrat-ing system. The calculation and mathematical model of setting is certain. Worked out equations of motion and the areas of stability are investigational. An algorithm and method of calculation of basic parameters of the shock-oscillation setting is developed. The main provisions for the creation of vibro-impact machines for the formation of foundation blocks have been formulated. Numerical values of the dynamic parameters of the working body and the environment were obtained, which can be used in the design of similar vibro-impact systems. Запропонована конструкція віброустановки для формування фундаментних блоків в ударно-вібраційному режиму роботи із розпалубкою та зніманням готового виробу після завершення процесу його ущільнення. Розкриті закономірності руху віброударних установок з урахуванням впливу динамічних параметрів суміші із висотою виробу 0,6 м та отримані аналітичні залежності для забезпечення стабілізації динамічних параметрів вібромашини, яка працює в резонансному режимі з цілеспрямованим врахуванням внутрішніх коливальних властивостей вібросистеми. Визначена розрахункова та математична модель установки. Складені рівняння руху та досліджені зони стійкості. Розроблено алгоритм та методика розрахунку основних параметрів ударно-вібраційної установки. Сформульовано основні положення для створення віброударних машин для формування фундаментних блоків. Отримано числові значення динамічних параметрів робочого органу і середовища, які можна використовувати при проектуванні подібних віброударних систем.
- 29 December 2021
- Published by Private Company Technology Center
- p. 77-93
Study of technical systems of materials compaction process
The working process of concrete mixture compaction is investigated. The model of the processing medium is determined, which is characterized by three stages. At the first stage of compaction it is a free-flowing medium, at the second and third stages of compaction it is an elastic-viscoplastic medium. This result lies in the definition of the physical and mathematical model, the equations of motion. The vibration system «machine-medium» at any moment of movement consists of two components – one is capable of accumulating energy that passes from one form to another (reactance), and the second is energy dissipation (active resistance). The influence of active and reactive forces on the general movement of the system under study has been investigated and determined. By solving the equations, analytical dependencies were obtained, which established the laws of motion of the «Vibration machine – sealing medium» system. Practical implementation for technical systems for the formation of concrete products and soil compaction processes under the main pipeline has been carried out. An algorithm and method for calculating the main parameters of vibration systems for compaction of working media have been developed.
- 29 December 2021
- Published by Private Company Technology Center
- p. 77-93
Study of technical systems of materials compaction process
The working process of concrete mixture compaction is investigated. The model of the processing medium is determined, which is characterized by three stages. At the first stage of compaction it is a free-flowing medium, at the second and third stages of compaction it is an elastic-viscoplastic medium. This result lies in the definition of the physical and mathematical model, the equations of motion. The vibration system «machine-medium» at any moment of movement consists of two components – one is capable of accumulating energy that passes from one form to another (reactance), and the second is energy dissipation (active resistance). The influence of active and reactive forces on the general movement of the system under study has been investigated and determined. By solving the equations, analytical dependencies were obtained, which established the laws of motion of the «Vibration machine – sealing medium» system. Practical implementation for technical systems for the formation of concrete products and soil compaction processes under the main pipeline has been carried out. An algorithm and method for calculating the main parameters of vibration systems for compaction of working media have been developed.
- 29 December 2021
- Published by Private Company Technology Center
- p. 57-76
Research of technical systems of processes of mixing materials
The process of a vibration concrete mixer has been investigated. Well-coordinated equations of motion of the system «mixer – concrete mixture» and their solutions have established the regularities of changing the parameters of the mixer at different angles of inclination. An experimental design of vibration-gravitational mixing has been developed and manufactured, and studies of the working process of mixing efficiency have been carried out on it. Research carried out at three warehouses of concrete mixtures confirmed the assumptions accepted in the work, the assumption and the selected physical and mathematical model of the «Mixer – concrete mixture» system. The use of a vibration concrete mixer made it possible to reduce the duration of mixing by 2.5–3 times in comparison with conventional free mixing concrete mixers. Provides the preparation of hard concrete mixtures and improving the quality of concrete mixtures due to the destruction of defective aggregates and a more uniform distribution of the binder throughout the volume of the mixed mixture. An algorithm and method for calculating the main parameters of a vibration concrete mixer have been developed.
- 29 December 2021
- Published by Private Company Technology Center
- p. 57-76
Research of technical systems of processes of mixing materials
The process of a vibration concrete mixer has been investigated. Well-coordinated equations of motion of the system «mixer – concrete mixture» and their solutions have established the regularities of changing the parameters of the mixer at different angles of inclination. An experimental design of vibration-gravitational mixing has been developed and manufactured, and studies of the working process of mixing efficiency have been carried out on it. Research carried out at three warehouses of concrete mixtures confirmed the assumptions accepted in the work, the assumption and the selected physical and mathematical model of the «Mixer – concrete mixture» system. The use of a vibration concrete mixer made it possible to reduce the duration of mixing by 2.5–3 times in comparison with conventional free mixing concrete mixers. Provides the preparation of hard concrete mixtures and improving the quality of concrete mixtures due to the destruction of defective aggregates and a more uniform distribution of the binder throughout the volume of the mixed mixture. An algorithm and method for calculating the main parameters of a vibration concrete mixer have been developed.
- Open Access
- 31 August 2021
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (7(112)) , 41-49
Determiantion of energy characteristics of material destruction in the crushing chamber of the vibration crusher
The crushing equipment is characterized by a significant energy-consuming system during the crushing workflow. The current trend in the development of such processes puts forward requirements for the development of new or improvement of existing energy-saving equipment. The essence of the solution to the problem in this work is determined by using resonant modes, which are inherently the most effective. The practical implementation of the resonance mode has been achieved taking into account the conditions for the interaction of the resonant vibration crusher with the material at the stages of its destruction. The degree of the stress-strain state of the material is taken into account, which was a prerequisite for identifying the potential for the development of a vibration load. Composed equations of motion based on a substantiated discrete-continuous model of a vibration crusher and processing material. An approach is applied to determine the stepwise destruction of the material with the determination of the required degree of energy. This methodological approach made it possible to reveal the nature of the process of material destruction, where energy costs at the stages of crack formation, their development and final destruction are taken into account. It was revealed that the greatest energy consumption during the operation of crushers goes into the kinetic energy of the crushing plates and the potential energy of deformation of the springs. The proposed model is common for any design of a vibration machine and its operating modes. The stable resonance mode has made it possible to significantly reduce the energy consumption for the course of the technological process of material grinding. The results obtained are used to improve the calculation methods for vibratory jaw and cone crushers that implement the corresponding energy-saving stable zones of the working process.
- 31 August 2021
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (7(112)) , 41-49
Open AccessDetermiantion of energy characteristics of material destruction in the crushing chamber of the vibration crusher
The crushing equipment is characterized by a significant energy-consuming system during the crushing workflow. The current trend in the development of such processes puts forward requirements for the development of new or improvement of existing energy-saving equipment. The essence of the solution to the problem in this work is determined by using resonant modes, which are inherently the most effective. The practical implementation of the resonance mode has been achieved taking into account the conditions for the interaction of the resonant vibration crusher with the material at the stages of its destruction. The degree of the stress-strain state of the material is taken into account, which was a prerequisite for identifying the potential for the development of a vibration load. Composed equations of motion based on a substantiated discrete-continuous model of a vibration crusher and processing material. An approach is applied to determine the stepwise destruction of the material with the determination of the required degree of energy. This methodological approach made it possible to reveal the nature of the process of material destruction, where energy costs at the stages of crack formation, their development and final destruction are taken into account. It was revealed that the greatest energy consumption during the operation of crushers goes into the kinetic energy of the crushing plates and the potential energy of deformation of the springs. The proposed model is common for any design of a vibration machine and its operating modes. The stable resonance mode has made it possible to significantly reduce the energy consumption for the course of the technological process of material grinding. The results obtained are used to improve the calculation methods for vibratory jaw and cone crushers that implement the corresponding energy-saving stable zones of the working process.