MIMurtada A. Ismael

Murtada A. Ismael

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Murtada A. Ismael has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Shear Performance and Sustainability Assessment of Reinforced Concrete Beams with Longitudinal Hollow Cores

    by Yahyia M. Hameed, Murtada A. Ismael, Osama Alazzawi

    Objective: This study investigates the shear performance of reinforced concrete beams containing longitudinal hollow cores, focusing on hollow-core diameter, shear span-to-effective depth ratio (a/d), and environmental benefits from reduced concrete consumption. Methodology: An experimental program was conducted on six reinforced concrete beam specimens subjected to four-point bending with two symmetrically applied concentrated loads until failure. Hollow-core diameter and a/d were varied. Measured shear capacities were compared with ACI 318 predictions. Material Production Energy (MPE) and CO 2 emissions were evaluated from the material quantities used in each specimen. Results: Increasing hollow-core diameter reduced beam stiffness and ultimate shear capacity, with reductions of up to 19.4% relative to the solid beam. Increasing a/d from 2.5 to 3.0 reduced ultimate shear capacity by approximately 10%. All specimens failed in a brittle diagonal shear mode. ACI 318 consistently underestimated measured shear capacities, providing conservative predictions. Reduced concrete quantities also decreased MPE and CO 2 emissions. Discussion: The results show that hollow-core diameter and a/d affect shear strength, cracking behavior, and stiffness. Longitudinal hollow cores can reduce material production impacts while maintaining acceptable shear performance within the investigated range. Conclusion: Longitudinal hollow cores provide a viable approach for reducing concrete consumption and environmental impacts without disproportionate loss of shear capacity within the investigated geometric limits. Further studies with larger specimen sizes and repeated specimens are required to verify these findings.

  • Open Access

    The Effect of Longitudinal Hollows on the Carbon Footprint and Economic Behavior of RC Deep Beams

    by Abbas H. Abdulabbas, Murtada A. Ismael, Anwar D. Mahmoud

    Introduction/ Objective: This study investigates the environmental and economic impact of using longitudinal hollows in RC deep beams, identifying the optimal hollow configuration based on weight reduction compared to peak load. Methods: Sixteen deep beams were cast and tested, fifteen of which contained longitudinal hollows, along with a control beam. The deep beams were divided into five groups to study the effects of the number and depth of hollows, the geometric shape of the hollows, the diameter of the hollows, and the slope of the hollows. Results: The results illustrated that using longitudinal hollows decreases the peak load of the beams by 2.8% to 20.1%, leads to a reduction in weight of 3.56% to 12.35%, reduces CO 2 emissions by 3.82% to 13.82%, and decreases embodied energy consumption by 3.48% to 13.80%. Discussion: Economic analysis indicates that the construction costs of the deep beams are reduced by 3.81% to 13.71% compared to the control beam. Moreover, the behavior of beams with fewer hollows was better, and the smaller hollow diameters resulted in improved peak load capacity. The deep beam with a circular hollow section performed better than other shapes, especially when centered and without a slope, as a slope reduces its peak load capacity. The construction cost of the deep beams is reduced by 3.81% to 13.71% compared to the control beam. Moreover, the behavior of beams with fewer hollows was better, and the smaller hollow diameters resulted in improved peak load capacity. The deep beam with a circular hollow section performed better than other shapes, especially when centered and without a slope, as a slope reduces its peak load capacity. Conclusion: Using longitudinal hollows in RC deep beams presents a viable alternative for reducing environmental impact, as well as lowering the cost and waste of raw materials used in their construction, while maintaining satisfactory structural performance, especially for beams with small hollow diameters.

  • Open Access

    Experimental investigation of hollow-core reinforced concrete T-beams

    by Murtada A. Ismael, Haider M. Abdulhusain, Yahyia M. Hameed

  • Behavior of reinforced reactive powder concrete one-way slab under static loads

    by Tahseen A. Madhloom, Murtada A. Ismael

    One of the recent improvements in concrete technology is reactive powder concrete (RPC), exhibiting superior properties such as high durability, great ductility One of the recent improvements in concrete technology is reactive powder concrete (RPC), exhibiting superior properties such as high durability, great ductility

  • Open Access

    The effect of bracing and lateral load on the behavior of semi-rigid steel frames

    by Raghdah H. Al-Sherif, Murtada A. Ismael

    Steel structures consist of beams, columns, and the connection between the beams and the columns. The beam-column connection behavior can affect the total behavior of steel structures. It’s usually assumed to be a fully rigid connection or perfectly pinned connection in the design and analysis of steel frames. In actuality, the beam-column connection behavior is between the fully rigid connection and the perfect pinned connection. This type of connection is termed a semi-rigid connection. In this article, the effect of linear elastic semi-rigid connections on the behavior of steel frames was represented in different study cases. Moreover, the effect of bracing status and lateral loading existence on the behavior of semi-rigid connection was considered in the study. The numerical modeling was produced in two steps: the first was the verification modeling of the finite element model, and the second was considered with the numerical analysis of the case studies. Numerical models were produced using the finite element method to investigate the effect of the semi-rigid connection on the behavior of a two-bay one-story frame with a bracing system and one-bay four-story frame for lateral loading effect on steel frames with the semi-rigid connection. ANSYS program was used for the numerical analysis of the frames. The semi-rigid connection was assumed to be a spring rotational element using COMBIN14 in ANSYS program, while the beams and column BEAM3 element were employed. The verification results showed a good agreement with the results of other previous research. The bracing system of the frame can reduce the effect of the semi-rigid connection on the behavior of the frame by a large percentage. Moreover, a large percentage of the semi-rigid connection’s influence is related to the existence of the lateral loading of the frame. This indicates the importance of including the semi-rigid connection parameter in the design and the analysis of steel frames taking into account the effect of the bracing system of the frame and the existence of the lateral loading.


  • Open Access

    Direct shear of steel fiber self-compacting concrete

    by Murtada A. Ismael, Yahyia M. Hameed

    The impact of steel fiber on the direct shear of normal-strength and high-strength self-compacting concrete (SCC) is investigated experimentally in this research. The scheme of empirical work is divided into two groups. In the first group, the impact of different steel fiber volumetric ratios of 0%, 0.40%, and 0.80% was investigated on normal-strength SCC. In contrast, in the second group, the same ratios were investigated on high-strength SCC. The outcomes revealed that increasing the volumetric ratio of steel fiber in normal-strength SCC from 0% to 0.4% and 0.8% made the ultimate direct shear stress increase by 9.3% to 18.8% and the maximum vertical displacement increased by 10.5% and 19.1% respectively. While increasing steel fiber from 0% to 0.4% and 0.8% made the ultimate shear stress increase by 4.9% and 14.6% and the maximum vertical displacement increased by 8.4% and 16.5%. Also, the enhancement due to the presence of steel fibers in high-strength SCC direct shear samples was lower than that of normal strength SCC samples. The toughness that represents the ductility index, increased with increasing steel fiber ratio and SCC under direct shear became more ductile.

  • Open Access

    Effect of semi-rigid beam-column connection on structural behavior of steel frames

    by Raghdah H. Al-Sherif, Murtada A. Ismael

    This paper investigates the effect of beam-column connection with semi-rigid rotational stiffness values on the behavior of different frame cases such as: support type and number of stories using ANSYS software. A previously studied model was selected for verification purposes. The support types that were chosen for this study are fixed-fixed and pinned-pinned connections. In terms of the number of stories, one-bay three-story and one-bay five-story frames were selected. The results of the numerical simulation showed that when the stiffness of beam-column connection is changed to semi-rigid connection of rotational stiffness value (25EI/L, 15EI/L and 10EI/L) can increases the maximum vertical displacement, horizontal displacement and maximum rotation by a percentages of (16.29, 35.42 and 17.43) % respectively for fixed-fixed support and percentages of (28.1, 26.8 and 15.44) % respectively for pinned-pinned support for semi-rigid connection when compared with rigid case. Changing the rotational stiffness of the beam-column connection to semi-rigid stiffness effect the load-displacement curve of the frame and make it less stiff. Moreover, the results showed that changing the number of stories from three to five stories with semi-rigid connections can increase the horizontal displacement by a percentage of 87 % for rotational stiffness of 10EI/L while for rigid case the percentage of increasing is 81%. This can indicate the importance of semi-rigid connection on the behavior of the frame in the analysis and design of steel structures.


  • Open Access

    Structural behavior of hollow-core reinforced self-compacting concrete beams

    by Murtada A. Ismael, Yahyia M. Hameed

    This paper presents an experimental investigation on the structural performance of hollow-core reinforced self-compacting concrete beams and performs an optimization analysis to select the optimum hollow-core beam section, as well as perform a sustainability analysis. The experimental program includes constructing and testing five beams with different longitudinal hollow-core diameters created by using recycled plastic pipes, as well as a solid beam, used as a reference specimen. The results show that it can reduce the concrete from self-compacting concrete beams with percentages from 5.4 to 14.2 with a decrease in the first crack load from 9.1 to 22.7% and the ultimate strength from 2.3 to 10.5% respectively compared to the reference solid beam. The optimization analysis shows that the beam of 46 mm diameter hollow-core is the optimum selection in the concrete volume reduction of 11.1%, cracking load, and ultimate load reduction of 13.6% and 9.3% respectively among all the other beam specimens. While the sustainability analysis reveals that, using longitudinal voids of diameters from 32 to 52 mm leads to a decrease in the embodied energy with percentages from 5.4 to 14.2% and carbon dioxide emission with percentages from 5.4 to 14.1% respectively. Increasing the longitudinal void diameter makes hollow-core self-compacting concrete beams more ductile and exhibits large deflections before failure occurrences.Article Highlights: Tests on hollow-core reinforced self-compacting concrete beams are conducted. Recycled plastic pipes are used to create hollow-core in the beams and to reduce ineffective concrete. Reducing ineffective concrete contributes to sustainability with maintaining a good ratio of beam strength.


  • Open Access

    Post Buckling Behavior of Prismatic Structural Steel Members with Semi Rigid Connections

    by Amer M. Ibrahim, Murtada A. Ismael

    In most designs of steel frames,beam-column connections are assumed either perfectly pinned or fully rigid. This assumption results in an incorrect estimation of the structural behavior of these frames. Practically, beam-column connections are between these two extreme assumptions and possess some rotational stiffness; therefore, it is called semi rigid connection. This research, presents a numerical analysis using finite element method to study the effect of semi-rigid connection on post buckling behavior of prismatic structural steel frames. The beam-column connection is modeled by linear elastic rotational spring element with specified rotational stiffness. The obtained results reveal that changing beam-column connection from rigid to semi rigid with different rotational joint stiffness values make the load-displacement curve of post buckling behavior less stiffer, the ultimate load decrease and ultimate vertical displacements increase with percentages depend on joint stiffness value and type of frame ;thus, semi-rigid connection should be considered in analysis and design of steel frames which exhibits post buckling behavior to obtain more realistic results.