Vazgen Bagdasaryan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Vazgen Bagdasaryan has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Rafał Wyczółkowski
Department of Production Management, Czestochowa University of Technology, Armii Krajowej 19, 42-200 Częstochowa, Poland
6 shared publications - Marek Gała
Institute of Electric Power Engineering, Czestochowa University of Technology, Armii Krajowej 17, 42-200 Czestochowa, Poland
5 shared publications - Marcin Gołąbczak
Institute of Machine Tools and Production Engineering, Lodz University of Technology, Lodz, Poland
3 shared publications - Artur Zbiciak
Faculty of Civil Engineering, Warsaw University of Technology, Al. Armii Ludowej 16, 00-637 Warsaw, Poland
2 shared publications - Dariusz Walasek
Faculty of Civil Engineering, Warsaw University of Technology, Al. Armii Ludowej 16, 00-637 Warsaw, Poland
2 shared publications - Eugeniusz Koda
Warsaw University of Life Sciences – SGGW
2 shared publications
Latest Publications
- Open Access
- 13 November 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (22) , 11274
Continuous-Time Hidden Markov Modeling for Remaining Service Life Estimation of Building Elements Under Inspection Uncertainty
Service life estimates derived from inspections depend on both deterioration dynamics and the accuracy of condition assessments. This study develops a continuous-time hidden Markov framework for estimating the remaining service life of building elements from sparse inspection histories. A sequential deterioration model describes progression towards a poor condition threshold requiring major intervention, rather than structural collapse. The framework is implemented in MATLAB 2026a and applied to records of 25 elements from two inspection campaigns. Transition intensities and initial state probabilities are estimated by maximum likelihood for fixed scenarios of inspection error. Posterior condition probabilities are then used to calculate remaining life distributions and survival measures. Sampling variability is assessed by complete weighted enumeration of a stratified bootstrap, while optimization from multiple starting points checks numerical reproducibility. Inspection histories produce different life estimates for elements with identical latest ratings, although the hidden model does not improve data fit over the observable continuous time benchmark. Broad uncertainty in estimated life measures persists despite reproducible optimization, indicating that limited inspection information remains a major constraint within the adopted model. The framework provides a transparent link between uncertain inspections and service life forecasts while distinguishing predictive variability from sampling uncertainty. The findings highlight the need for longer inspection histories, independent calibration of classification errors and validation against subsequent observations.
- 13 November 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (22) , 11274
Open AccessContinuous-Time Hidden Markov Modeling for Remaining Service Life Estimation of Building Elements Under Inspection Uncertainty
Service life estimates derived from inspections depend on both deterioration dynamics and the accuracy of condition assessments. This study develops a continuous-time hidden Markov framework for estimating the remaining service life of building elements from sparse inspection histories. A sequential deterioration model describes progression towards a poor condition threshold requiring major intervention, rather than structural collapse. The framework is implemented in MATLAB 2026a and applied to records of 25 elements from two inspection campaigns. Transition intensities and initial state probabilities are estimated by maximum likelihood for fixed scenarios of inspection error. Posterior condition probabilities are then used to calculate remaining life distributions and survival measures. Sampling variability is assessed by complete weighted enumeration of a stratified bootstrap, while optimization from multiple starting points checks numerical reproducibility. Inspection histories produce different life estimates for elements with identical latest ratings, although the hidden model does not improve data fit over the observable continuous time benchmark. Broad uncertainty in estimated life measures persists despite reproducible optimization, indicating that limited inspection information remains a major constraint within the adopted model. The framework provides a transparent link between uncertain inspections and service life forecasts while distinguishing predictive variability from sampling uncertainty. The findings highlight the need for longer inspection histories, independent calibration of classification errors and validation against subsequent observations.
- Open Access
- 5 April 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (7) , 3555
Continuous-Time Markov Chain Modelling for Service Life Prediction of Building Elements
A continuous-time Markov chain framework is developed for service life prediction of building assets, and three formulations are compared: a homogeneous generator, a time-varying generator, and a fractional model. The framework delivers survival, density of absorption time, hazard, and mean time to absorption. For the homogeneous case, state trajectories are computed using matrix exponentials. The time-varying case is solved both by local exponential propagation on a time grid and by direct integration of the Kolmogorov equation. The fractional case is implemented in two independent ways, via a truncated series expansion and via an in-house routine for the Mittag-Leffler function, which also allows the direct evaluation of survival and hazard from the standard fractional relations while avoiding singular behaviour at the origin. This study shows that non-homogeneous rates accelerate deterioration relative to the homogeneous benchmark, whereas fractional dynamics reproduce early-time acceleration followed by a slow decline of the hazard, which is consistent with heavy-tailed survival and longer effective service life. The two fractional solvers provide mutually consistent outputs, which supports the numerical robustness of the approach. The framework is readily applicable to sparse inspection data and short observation windows and provides a transparent basis for comparing modelling assumptions that affect life cycle forecasts used in asset management and maintenance planning.
- 5 April 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (7) , 3555
Open AccessContinuous-Time Markov Chain Modelling for Service Life Prediction of Building Elements
A continuous-time Markov chain framework is developed for service life prediction of building assets, and three formulations are compared: a homogeneous generator, a time-varying generator, and a fractional model. The framework delivers survival, density of absorption time, hazard, and mean time to absorption. For the homogeneous case, state trajectories are computed using matrix exponentials. The time-varying case is solved both by local exponential propagation on a time grid and by direct integration of the Kolmogorov equation. The fractional case is implemented in two independent ways, via a truncated series expansion and via an in-house routine for the Mittag-Leffler function, which also allows the direct evaluation of survival and hazard from the standard fractional relations while avoiding singular behaviour at the origin. This study shows that non-homogeneous rates accelerate deterioration relative to the homogeneous benchmark, whereas fractional dynamics reproduce early-time acceleration followed by a slow decline of the hazard, which is consistent with heavy-tailed survival and longer effective service life. The two fractional solvers provide mutually consistent outputs, which supports the numerical robustness of the approach. The framework is readily applicable to sparse inspection data and short observation windows and provides a transparent basis for comparing modelling assumptions that affect life cycle forecasts used in asset management and maintenance planning.
- 29 January 2025
- Published by Elsevier in Composite Structures
- Vol. 356
Tolerance modelling of vibrations of thin functionally graded cylindrical shells
- 29 January 2025
- Published by Elsevier in Composite Structures
- Vol. 356
Tolerance modelling of vibrations of thin functionally graded cylindrical shells
- Open Access
Qualitative Analysis of the Heat Transfer in a Package of Square Steel Sections
During the heat treatment of square or rectangular steel sections, a heated charge, arranged in regular packages, is placed inside a furnace. This type of charge forms a porous medium through which a complex heat flow occurs during heating. Several heat transfer mechanisms act simultaneously within this medium: conduction through the section walls, conduction and natural convection within the gas, thermal radiation between the section walls, and complex heat transfer (mainly contact conduction) at the joints between the adjacent sections. This article presents a qualitative analysis of heat transfer, aiming to determine the contribution of individual heat transfer mechanisms to the overall process. For this purpose, an analytical model of complex heat transfer within the package was employed, based on the thermo-electric analogy. The results from experimental studies were used to calculate the natural convection and heat transfer at the joints. It was assumed that the material of the sections was low-carbon steel, and the gas was air. Calculations were performed for the temperature range of 25 °C to 700 °C, considering three different geometrical configurations of the sections. It was shown that the effective thermal conductivity (ETC) of the package for the considered geometrical cases varies between 2.2 and 10.6 W/(m·K), which is an order of magnitude lower than the thermal conductivity of the individual sections. This parameter increased dynamically with the temperature. Moreover, the heat transfer intensity within the package of sections was nearly an order of magnitude lower than the heat conduction observed in a solid steel charge. Additionally, it was shown that the primary heat transfer mechanisms governing the heating process were thermal conduction (in the lower temperature range—up to approximately 350 °C) and thermal radiation (in the higher temperature range—above 350 °C). The gas convection inside the sections had a minimal impact on the heating process of the package. The primary parameters influencing the quality of the results were the joint resistance between the adjacent sections and the emissivity of the sections. The presented model can be used for the optimization of heat treatment processes for the considered charge.
Open AccessQualitative Analysis of the Heat Transfer in a Package of Square Steel Sections
During the heat treatment of square or rectangular steel sections, a heated charge, arranged in regular packages, is placed inside a furnace. This type of charge forms a porous medium through which a complex heat flow occurs during heating. Several heat transfer mechanisms act simultaneously within this medium: conduction through the section walls, conduction and natural convection within the gas, thermal radiation between the section walls, and complex heat transfer (mainly contact conduction) at the joints between the adjacent sections. This article presents a qualitative analysis of heat transfer, aiming to determine the contribution of individual heat transfer mechanisms to the overall process. For this purpose, an analytical model of complex heat transfer within the package was employed, based on the thermo-electric analogy. The results from experimental studies were used to calculate the natural convection and heat transfer at the joints. It was assumed that the material of the sections was low-carbon steel, and the gas was air. Calculations were performed for the temperature range of 25 °C to 700 °C, considering three different geometrical configurations of the sections. It was shown that the effective thermal conductivity (ETC) of the package for the considered geometrical cases varies between 2.2 and 10.6 W/(m·K), which is an order of magnitude lower than the thermal conductivity of the individual sections. This parameter increased dynamically with the temperature. Moreover, the heat transfer intensity within the package of sections was nearly an order of magnitude lower than the heat conduction observed in a solid steel charge. Additionally, it was shown that the primary heat transfer mechanisms governing the heating process were thermal conduction (in the lower temperature range—up to approximately 350 °C) and thermal radiation (in the higher temperature range—above 350 °C). The gas convection inside the sections had a minimal impact on the heating process of the package. The primary parameters influencing the quality of the results were the joint resistance between the adjacent sections and the emissivity of the sections. The presented model can be used for the optimization of heat treatment processes for the considered charge.
- Open Access
- 6 August 2024
- Published by Springer Nature in Continuum Mechanics and Thermodynamics
- Vol. 36 (6) , 1661-1684
Mathematical modelling of stability problems for thin transversally graded cylindrical shells
The objects of consideration are thin linearly elastic Kirchhoff–Love-type open circular cylindrical shells having a functionally graded macrostructure and a tolerance-periodic microstructure in circumferential direction. The first aim of this contribution is to formulate and discuss a new mathematical averaged non-asymptotic model for the analysis of selected stability problems for such shells. As a tool of modelling we shall apply the tolerance averaging technique. The second aim is to derive and discuss a new mathematical averaged asymptotic model. This model will be formulated using the consistent asymptotic modelling procedure. The starting equations are the well-known governing equations of linear Kirchhoff–Love second-order theory of thin elastic cylindrical shells. For the functionally graded shells under consideration, the starting equations have highly oscillating, non-continuous and tolerance-periodic coefficients in circumferential direction, whereas equations of the proposed models have continuous and slowly-varying coefficients. Moreover, some of coefficients of the tolerance model equations depend on a microstructure size. It will be shown that in the framework of the tolerance model not only the fundamental cell-independent, but also the new additional cell-dependent critical forces can be derived and analysed.
- 6 August 2024
- Published by Springer Nature in Continuum Mechanics and Thermodynamics
- Vol. 36 (6) , 1661-1684
Open AccessMathematical modelling of stability problems for thin transversally graded cylindrical shells
The objects of consideration are thin linearly elastic Kirchhoff–Love-type open circular cylindrical shells having a functionally graded macrostructure and a tolerance-periodic microstructure in circumferential direction. The first aim of this contribution is to formulate and discuss a new mathematical averaged non-asymptotic model for the analysis of selected stability problems for such shells. As a tool of modelling we shall apply the tolerance averaging technique. The second aim is to derive and discuss a new mathematical averaged asymptotic model. This model will be formulated using the consistent asymptotic modelling procedure. The starting equations are the well-known governing equations of linear Kirchhoff–Love second-order theory of thin elastic cylindrical shells. For the functionally graded shells under consideration, the starting equations have highly oscillating, non-continuous and tolerance-periodic coefficients in circumferential direction, whereas equations of the proposed models have continuous and slowly-varying coefficients. Moreover, some of coefficients of the tolerance model equations depend on a microstructure size. It will be shown that in the framework of the tolerance model not only the fundamental cell-independent, but also the new additional cell-dependent critical forces can be derived and analysed.
- Open Access
Experimental and Theoretical Studies of the Thermal Contact Conductance for Bundles of Round Steel Bars
The paper presents investigations devoted to the analysis of the thermal contact conduction in a bundle of round steel bars. The phenomenon can be expressed quantitatively with the use of thermal contact conductance (hct). The starting points for the presented analysis were the results of the experimental measurements of the effective thermal conductivity. The measurements were performed for samples of a medium in the form of flat packed beds of bars with three different arrangements: staggered, in-line, and crossed and four bar diameters: 10, 20, 30, and 40 mm. Next, a mathematical model was developed, thanks to which the values of the hct coefficient were calculated for the analyzed cases. This approach consists in analyzing thermal resistances in the medium model, which is defined with an elementary cell. It was established that the value of the hct coefficient in the temperature range of 50–600 °C changes within the range of 50–175 W/(m2·K), and it decreases with an increase in the bar diameter. The final effect of the present study was to develop generalized approximation equations describing changes in thermal contact conductance in the heated bar bundle simultaneously in the temperature and bar diameter function.
Open AccessExperimental and Theoretical Studies of the Thermal Contact Conductance for Bundles of Round Steel Bars
The paper presents investigations devoted to the analysis of the thermal contact conduction in a bundle of round steel bars. The phenomenon can be expressed quantitatively with the use of thermal contact conductance (hct). The starting points for the presented analysis were the results of the experimental measurements of the effective thermal conductivity. The measurements were performed for samples of a medium in the form of flat packed beds of bars with three different arrangements: staggered, in-line, and crossed and four bar diameters: 10, 20, 30, and 40 mm. Next, a mathematical model was developed, thanks to which the values of the hct coefficient were calculated for the analyzed cases. This approach consists in analyzing thermal resistances in the medium model, which is defined with an elementary cell. It was established that the value of the hct coefficient in the temperature range of 50–600 °C changes within the range of 50–175 W/(m2·K), and it decreases with an increase in the bar diameter. The final effect of the present study was to develop generalized approximation equations describing changes in thermal contact conductance in the heated bar bundle simultaneously in the temperature and bar diameter function.
- Open Access
- 9 July 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (14) , 6977
Experimental Investigation of Thermal Contact Conductance in a Bundle of Flat Steel Bars
The phenomenon of thermal contact conduction in two-phase (fluid-solid) media determines many technological processes. An example of such a process is heat treatment of steel bars, when a heated charge has a form of a packed bundle. In order to determine the optimal heating curve it is necessary to have knowledge about the intensity of transfer through contact areas of the bars. This phenomenon is quantified by the thermal contact conductance hct. The article describes the methodology of determining the hct coefficient for bundles of flat steel bars. The starting point for the analysis is the measurement of the effective thermal conductivity kef performed for 5 × 20 mm and 10 × 20 mm bars. Individual samples of the same bars differed in arrangement. The analytical investigation used the concept of an elementary cell. This approach consisted in analysing resistances for individual heat transfer types: conduction, contact conduction and radiation. Based on the performed calculations it has been established that the value of the hct coefficient for the analysed samples is within the range 128–472 W/(m2 K). Changes of the hct coefficient in the temperature range 25–700 °C can be described with a second degree polynomial. It has been established that hct assumes maximum values in the temperature range from 300 °C to 400 °C.
- 9 July 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (14) , 6977
Open AccessExperimental Investigation of Thermal Contact Conductance in a Bundle of Flat Steel Bars
The phenomenon of thermal contact conduction in two-phase (fluid-solid) media determines many technological processes. An example of such a process is heat treatment of steel bars, when a heated charge has a form of a packed bundle. In order to determine the optimal heating curve it is necessary to have knowledge about the intensity of transfer through contact areas of the bars. This phenomenon is quantified by the thermal contact conductance hct. The article describes the methodology of determining the hct coefficient for bundles of flat steel bars. The starting point for the analysis is the measurement of the effective thermal conductivity kef performed for 5 × 20 mm and 10 × 20 mm bars. Individual samples of the same bars differed in arrangement. The analytical investigation used the concept of an elementary cell. This approach consisted in analysing resistances for individual heat transfer types: conduction, contact conduction and radiation. Based on the performed calculations it has been established that the value of the hct coefficient for the analysed samples is within the range 128–472 W/(m2 K). Changes of the hct coefficient in the temperature range 25–700 °C can be described with a second degree polynomial. It has been established that hct assumes maximum values in the temperature range from 300 °C to 400 °C.
- Open Access
The Review of Chosen Methods Used to Investigate Heat Transfer in a Steel Porous Charge
The paper presents chosen experimental and model methods of investigating heat transfer in a steel porous charge. The results of this investigation provide information on both the qualitative and quantitative course of the analysed processes of heat exchange. The parameters which characterise the analysed phenomenon in a quantitative manner, among others, are: The effective thermal conductivity kef, the thermal contact resistance Rct and Nusselt number Nu. It has been established that it is not possible to use literature models in order to determine the kef coefficient. The authors present their own model of effective thermal conductivity. The above-mentioned parameters for a porous charge reach the values within the following ranges: kef: 1.0–8.5 W/(m·K); Rct: 0.0019–0.0057 (m2⋅K)/W; Nu: 1.2–7.1.
Open AccessThe Review of Chosen Methods Used to Investigate Heat Transfer in a Steel Porous Charge
The paper presents chosen experimental and model methods of investigating heat transfer in a steel porous charge. The results of this investigation provide information on both the qualitative and quantitative course of the analysed processes of heat exchange. The parameters which characterise the analysed phenomenon in a quantitative manner, among others, are: The effective thermal conductivity kef, the thermal contact resistance Rct and Nusselt number Nu. It has been established that it is not possible to use literature models in order to determine the kef coefficient. The authors present their own model of effective thermal conductivity. The above-mentioned parameters for a porous charge reach the values within the following ranges: kef: 1.0–8.5 W/(m·K); Rct: 0.0019–0.0057 (m2⋅K)/W; Nu: 1.2–7.1.
- Open Access
Analysing the Contact Conduction Influence on the Heat Transfer Intensity in the Rectangular Steel Bars Bundle
Bundles of steel bars, besides metal foams, are an example of cellular solids. Such bundles constitute a charge during the heat treatment of bars. The paper presents a mathematical model of transient heat transfer in a bundle of rectangular steel bars based on the energy balance method. The key element of this model is the procedure of determining the effective thermal conductivity using the electrical analogy. Different mechanisms of heat transfer occurring within the analysed medium (conduction in steel and contact conduction) are assigned corresponding thermal resistances. The discussed procedure involves expressing these resistances with the use of arithmetic relationships describing their changes in the temperature function. Thermal contact resistance has been described with the use of the relationships determined experimentally. As a result of the performed calculations, the influence of contact conduction between the adjacent bars and bundle arrangement on its heating time was established. The results of the calculations show that the heating time of bundles can be lowered by 5–40% as a result of a decrease in the thermal contact resistance. This effect depends on the bar size and bundle arrangement. From the practical point of view, the analysed problem is connected with the optimization of the heat treatment processes of steel bars.
Open AccessAnalysing the Contact Conduction Influence on the Heat Transfer Intensity in the Rectangular Steel Bars Bundle
Bundles of steel bars, besides metal foams, are an example of cellular solids. Such bundles constitute a charge during the heat treatment of bars. The paper presents a mathematical model of transient heat transfer in a bundle of rectangular steel bars based on the energy balance method. The key element of this model is the procedure of determining the effective thermal conductivity using the electrical analogy. Different mechanisms of heat transfer occurring within the analysed medium (conduction in steel and contact conduction) are assigned corresponding thermal resistances. The discussed procedure involves expressing these resistances with the use of arithmetic relationships describing their changes in the temperature function. Thermal contact resistance has been described with the use of the relationships determined experimentally. As a result of the performed calculations, the influence of contact conduction between the adjacent bars and bundle arrangement on its heating time was established. The results of the calculations show that the heating time of bundles can be lowered by 5–40% as a result of a decrease in the thermal contact resistance. This effect depends on the bar size and bundle arrangement. From the practical point of view, the analysed problem is connected with the optimization of the heat treatment processes of steel bars.
- Open Access
On Determination of the Effective Thermal Conductivity of a Bundle of Steel Bars Using the Krischer Model and Considering Thermal Radiation
Cellular solid materials are commonly found in industrial applications. By definition, cellular solids are porous materials that are built of distinct cells. One of the groups of such materials contains metal foams. Another group of cellular metals contains bundles of steel bars, which create charges during the heat treatment of the bars. A granular structure connected by the lack of continuity of the solid phase is the main feature that distinguishes bundles from metal foams. The boundaries of the bundle cells are made of adjacent bars, with the internal region taking the form of an air cavity. In this paper, we discuss the possibility of using the Krischer model to determine the effective thermal conductivity of heat-treated bundles of steel bars based on the results of experimental tests and calculations. The model allows the kef coefficient to be precisely determined, although it requires the weighting parameter f to be carefully matched. It is shown that the value of f depends on the bar diameter, while its changes within the examined temperature range (25–800 °C) can be described using a third-degree polynomial. Determining the coefficients of such a polynomial is possible only when the effective thermal conductivity of the considered charge is known. Moreover, we analyze a simplified solution, whereby a constant value of the f coefficient is used for a given bar diameter; however, the kef values obtained thanks to this approach are encumbered with inaccuracy amounting to several dozen percentage points. The obtained results lead to the conclusion that the Krischer model cannot be used for the discussed case.
Open AccessOn Determination of the Effective Thermal Conductivity of a Bundle of Steel Bars Using the Krischer Model and Considering Thermal Radiation
Cellular solid materials are commonly found in industrial applications. By definition, cellular solids are porous materials that are built of distinct cells. One of the groups of such materials contains metal foams. Another group of cellular metals contains bundles of steel bars, which create charges during the heat treatment of the bars. A granular structure connected by the lack of continuity of the solid phase is the main feature that distinguishes bundles from metal foams. The boundaries of the bundle cells are made of adjacent bars, with the internal region taking the form of an air cavity. In this paper, we discuss the possibility of using the Krischer model to determine the effective thermal conductivity of heat-treated bundles of steel bars based on the results of experimental tests and calculations. The model allows the kef coefficient to be precisely determined, although it requires the weighting parameter f to be carefully matched. It is shown that the value of f depends on the bar diameter, while its changes within the examined temperature range (25–800 °C) can be described using a third-degree polynomial. Determining the coefficients of such a polynomial is possible only when the effective thermal conductivity of the considered charge is known. Moreover, we analyze a simplified solution, whereby a constant value of the f coefficient is used for a given bar diameter; however, the kef values obtained thanks to this approach are encumbered with inaccuracy amounting to several dozen percentage points. The obtained results lead to the conclusion that the Krischer model cannot be used for the discussed case.