Mohit Singh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Mohit Singh has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Rupinder Singh
Mechanical Engineering Department, National Institute of Technical Teachers Training and Research, Chandigarh, India
10 shared publications - Ranvijay Kumar
Marwadi University Research Center, Department of Mechanical Engineering, Marwadi University, Rajkot, India
8 shared publications Pawan Preet
Department of Production Engineering, Guru Nanak Dev Engineering College, Ludhiana, India
5 shared publications- Sudhir Kumar
Department of Mechanical Engineering, Thapar Institute of Engineering and Technology, Patiala, India
3 shared publications K.R. Ravi
2 shared publicationsPawan Kumar
Department of Physics, Chandigarh University, Chandigarh, India
2 shared publications
Latest Publications
- Open Access
- 3 August 2026
- Published by Elsevier in Materials & Design
- Vol. 269
Plasma plume emission-driven closed-loop control in directed energy deposition
- 3 August 2026
- Published by Elsevier in Materials & Design
- Vol. 269
Open AccessPlasma plume emission-driven closed-loop control in directed energy deposition
- Open Access
- 19 March 2026
- Published by Elsevier in Materials & Design
- Vol. 265
Real-time identification of clad morphology and deposition regimes in SS 316 L DED via optical emission spectroscopy
- 19 March 2026
- Published by Elsevier in Materials & Design
- Vol. 265
Open AccessReal-time identification of clad morphology and deposition regimes in SS 316 L DED via optical emission spectroscopy
- Open Access
- 30 May 2022
- Published by Association for Computing Machinery (ACM)
- Vol. 21, 27-38
Detecting Secure Memory Deallocation Violations with CBMC
Scrubbing sensitive data before releasing memory is a widely accepted but often ignored programming practice for developing secure software. Consequently, confidential data such as cryptographic keys, passwords, and personal data, can remain in memory indefinitely, thereby increasing the risk of exposure to hackers who can retrieve the data using memory dumps or exploit vulnerabilities such as Heartbleed and Etherleak. We propose an approach for detecting a specific memory safety bug called Improper Clearing of Heap Memory Before Release, also known as Common Weakness Enumeration 244, in C programs. The CWE-244 bug in a program allows the leakage of confidential information when a variable is not wiped before heap memory is freed. Our approach combines taint analysis and model checking to detect this weakness. We have three main phases: (1) perform a coarse flow-insensitive inter-procedural static analysis on the program to construct a set of pointer variables that could point to sensitive data; (2) instrument the program with required dynamic variable tracking, and assertion logic for memory wiping before deallocation; and (3) invoke a model checker, the C-Bounded Model Checker (CBMC) in our case, to detect assertion violation in the instrumented program. We develop a tool, \toolname, implementing our instrumentation based algorithm, and we provide experimental validation on the Juliet Test Suite --- the tool is able to detect all the CWE-244 instances present in the test suite. To the best of our knowledge, this is the first work which presents a solution to the problem of detecting unscrubbed secure memory deallocation violations in programs.
- 30 May 2022
- Published by Association for Computing Machinery (ACM)
- Vol. 21, 27-38
Open AccessDetecting Secure Memory Deallocation Violations with CBMC
Scrubbing sensitive data before releasing memory is a widely accepted but often ignored programming practice for developing secure software. Consequently, confidential data such as cryptographic keys, passwords, and personal data, can remain in memory indefinitely, thereby increasing the risk of exposure to hackers who can retrieve the data using memory dumps or exploit vulnerabilities such as Heartbleed and Etherleak. We propose an approach for detecting a specific memory safety bug called Improper Clearing of Heap Memory Before Release, also known as Common Weakness Enumeration 244, in C programs. The CWE-244 bug in a program allows the leakage of confidential information when a variable is not wiped before heap memory is freed. Our approach combines taint analysis and model checking to detect this weakness. We have three main phases: (1) perform a coarse flow-insensitive inter-procedural static analysis on the program to construct a set of pointer variables that could point to sensitive data; (2) instrument the program with required dynamic variable tracking, and assertion logic for memory wiping before deallocation; and (3) invoke a model checker, the C-Bounded Model Checker (CBMC) in our case, to detect assertion violation in the instrumented program. We develop a tool, \toolname, implementing our instrumentation based algorithm, and we provide experimental validation on the Juliet Test Suite --- the tool is able to detect all the CWE-244 instances present in the test suite. To the best of our knowledge, this is the first work which presents a solution to the problem of detecting unscrubbed secure memory deallocation violations in programs.
- 4 September 2021
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 8 (3) , 3553-3581
On shear fracture and morphological features of fused filament fabrication based almond skin reinforced PLA structures
The polylactic acid (PLA) composite-based 3D printed functional prototypes have been widely explored for preparation of biomedical scaffolds with fused filament fabrication (FFF). But hitherto little has been reported on the use of the almond skin (AS) as reinforcement in PLA matrix for scaffolding applications with improved shear modulus (SM). In this study composite of PLA and AS was subjected to pull-out test to ensure SM and modulus of toughness (MOT), surface hardness and morphological investigations for use as scaffold. The results of study show that during pull-out test, maximum shear strength at peak (PSS) as 22.85MPa; maximum shear strength at break (BSS) as 20.56MPa was observed for samples printed with infill density (ID) 100%, infill angle (IA) 45° and infill speed (IS) 90 mm/s (on open source FFF setup). The maximum MOT as 25.50 MPa was noticed for sample printed at ID 60%, IA 45° and IS 50 mm/s. Further maximum SM as 21.80 MPa was observed for samples printed at ID 60%, IA 60° and IS 70 mm/s. The results have been supported by photo-micrographic analysis; surface hardness analysis; Taguchi and response surface methodology based historical data approach for optimisation of pull-out properties.
- 4 September 2021
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 8 (3) , 3553-3581
On shear fracture and morphological features of fused filament fabrication based almond skin reinforced PLA structures
The polylactic acid (PLA) composite-based 3D printed functional prototypes have been widely explored for preparation of biomedical scaffolds with fused filament fabrication (FFF). But hitherto little has been reported on the use of the almond skin (AS) as reinforcement in PLA matrix for scaffolding applications with improved shear modulus (SM). In this study composite of PLA and AS was subjected to pull-out test to ensure SM and modulus of toughness (MOT), surface hardness and morphological investigations for use as scaffold. The results of study show that during pull-out test, maximum shear strength at peak (PSS) as 22.85MPa; maximum shear strength at break (BSS) as 20.56MPa was observed for samples printed with infill density (ID) 100%, infill angle (IA) 45° and infill speed (IS) 90 mm/s (on open source FFF setup). The maximum MOT as 25.50 MPa was noticed for sample printed at ID 60%, IA 45° and IS 50 mm/s. Further maximum SM as 21.80 MPa was observed for samples printed at ID 60%, IA 60° and IS 70 mm/s. The results have been supported by photo-micrographic analysis; surface hardness analysis; Taguchi and response surface methodology based historical data approach for optimisation of pull-out properties.
- 30 August 2021
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 8 (3) , 3514-3538
On flexural, wear and morphological properties of 3D printed almond skin powder reinforced PLA matrix
In past one decade, some studies have been reported on use of natural fibre-reinforced thermoplastic matrix such as polylactic acid (PLA)-based 3D-printed functional prototypes for biomedical applications. But hitherto little has been reported on the flexural, wear and morphological properties of almond skin powder–-reinforced PLA matrixbased 3D-printed functional prototypes prepared by fused filament fabrication (FFF) as biomedical scaffold/implant. In this study, the 3D-printed functional parts were subjected to flexural, wear and morphological investigations. The results suggested that maximum flexural strength at break and peak was observed as 57.38 MPa and 63.761 MPa, respectively (while printing with FFF at infill density 60%, infill angle 60° and infill speed 70 mm/s). The results are supported with the optical photomicrographs and surface topography analysis, which shows that there is relation between mechanical and surface properties of functional prototypes. The minimum surface roughness (Ra) 19.98 nm has been observed for 3D-printed flexural samples at proposed settings.
- 30 August 2021
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 8 (3) , 3514-3538
On flexural, wear and morphological properties of 3D printed almond skin powder reinforced PLA matrix
In past one decade, some studies have been reported on use of natural fibre-reinforced thermoplastic matrix such as polylactic acid (PLA)-based 3D-printed functional prototypes for biomedical applications. But hitherto little has been reported on the flexural, wear and morphological properties of almond skin powder–-reinforced PLA matrixbased 3D-printed functional prototypes prepared by fused filament fabrication (FFF) as biomedical scaffold/implant. In this study, the 3D-printed functional parts were subjected to flexural, wear and morphological investigations. The results suggested that maximum flexural strength at break and peak was observed as 57.38 MPa and 63.761 MPa, respectively (while printing with FFF at infill density 60%, infill angle 60° and infill speed 70 mm/s). The results are supported with the optical photomicrographs and surface topography analysis, which shows that there is relation between mechanical and surface properties of functional prototypes. The minimum surface roughness (Ra) 19.98 nm has been observed for 3D-printed flexural samples at proposed settings.
- 3 April 2021
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 8 (2) , 2329-2348
Multi-material 3D printed PLA/PA6-TiO2 composite matrix: rheological, thermal, tensile, morphological and 4D capabilities
The flexibility provided by fused deposition modelling (FDM) in processing of thermoplastic composite matrix (polylactic acid (PLA), polyamide6 (PA6) etc.) has made this process acceptable in different fields of research varying from structural, non-structural engineering, medicinal and space applications. But hitherto little has been reported on multi-material printing of PLA/PA6-TiO2 (70–30 wt %) matrix composite on FDM for biomedical scaffolding applications. In this work, the biocompatible grade of PLA, PA6-TiO2 (70–30 wt %) has been selected. An effort has been made for multi-material printing of PLA/PA6-TiO2 polymeric matrix and optimised printing conditions for FDM processing of selected layer combinations were ascertained. The results of mechanical testing suggest that, Infill speed: 90mm/s, Infill pattern: rectilinear and layer combination: PLA 5 layers/PA6-TiO2 5 layers are the optimised conditions for the FDM processing. From thermal analysis, it has been observed that both PLA and PA6-TiO2 are thermally stable. Finally, PLA/PA6-TiO2 based prototypes have shown controlled two-way 4D capabilities under the hot (70°C) and cold (10°C) water (selected as stimulus in present case). The results of mechanical testing have been supported by morphological analysis (surface porosity) on fractured surface.
- 3 April 2021
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 8 (2) , 2329-2348
Multi-material 3D printed PLA/PA6-TiO2 composite matrix: rheological, thermal, tensile, morphological and 4D capabilities
The flexibility provided by fused deposition modelling (FDM) in processing of thermoplastic composite matrix (polylactic acid (PLA), polyamide6 (PA6) etc.) has made this process acceptable in different fields of research varying from structural, non-structural engineering, medicinal and space applications. But hitherto little has been reported on multi-material printing of PLA/PA6-TiO2 (70–30 wt %) matrix composite on FDM for biomedical scaffolding applications. In this work, the biocompatible grade of PLA, PA6-TiO2 (70–30 wt %) has been selected. An effort has been made for multi-material printing of PLA/PA6-TiO2 polymeric matrix and optimised printing conditions for FDM processing of selected layer combinations were ascertained. The results of mechanical testing suggest that, Infill speed: 90mm/s, Infill pattern: rectilinear and layer combination: PLA 5 layers/PA6-TiO2 5 layers are the optimised conditions for the FDM processing. From thermal analysis, it has been observed that both PLA and PA6-TiO2 are thermally stable. Finally, PLA/PA6-TiO2 based prototypes have shown controlled two-way 4D capabilities under the hot (70°C) and cold (10°C) water (selected as stimulus in present case). The results of mechanical testing have been supported by morphological analysis (surface porosity) on fractured surface.
- 3 April 2021
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 8 (2) , 2361-2384
On shear resistance of almond skin reinforced PLA composite matrix-based scaffold using cancellous screw
The polylactic acid (PLA) matrix is being widely used as a scaffold for biomedical applications. But hitherto little has been reported on the use of 3D printed almond skin (AS) powder-reinforced matrix of PLA as a scaffold for ensuring shear resistance properties at different insertion angle, depth and infill pattern for holding a cancellous screw. This paper reports the shear fracture and morphological features of the 3D printed AS powder-reinforced matrix of PLA, prepared by fused deposition modelling for biomedical scaffolds using a cancellous pedicle screw. The study was performed using the angle of insertion 10°, 20° and 30°, depth of insertion of screw 40%, 70% and 100% in prototype and infill patterns (honeycomb, rectilinear and triangular) of 3D printed functional prototype. The study suggested that the maximum shear strength at peak (23.02 MPa) and maximum shear strength at break (22.90 MPa) were observed for honeycomb printing infill pattern, 100% insertion of screw and at 30° angle of insertion to prototype, whereas maximum modulus of toughness was observed for rectilinear pattern with 100% insertion of screw and 20° angle of insertion. Further morphological study was performed on the fractured surface to support the mechanical results obtained by pull-out test for ensuring shear resistance. Overall the study will be useful for an orthopaedic surgeon for ensuring angle, depth of insertion and infill pattern selection for minimising the shear fracture of the scaffold.
- 3 April 2021
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 8 (2) , 2361-2384
On shear resistance of almond skin reinforced PLA composite matrix-based scaffold using cancellous screw
The polylactic acid (PLA) matrix is being widely used as a scaffold for biomedical applications. But hitherto little has been reported on the use of 3D printed almond skin (AS) powder-reinforced matrix of PLA as a scaffold for ensuring shear resistance properties at different insertion angle, depth and infill pattern for holding a cancellous screw. This paper reports the shear fracture and morphological features of the 3D printed AS powder-reinforced matrix of PLA, prepared by fused deposition modelling for biomedical scaffolds using a cancellous pedicle screw. The study was performed using the angle of insertion 10°, 20° and 30°, depth of insertion of screw 40%, 70% and 100% in prototype and infill patterns (honeycomb, rectilinear and triangular) of 3D printed functional prototype. The study suggested that the maximum shear strength at peak (23.02 MPa) and maximum shear strength at break (22.90 MPa) were observed for honeycomb printing infill pattern, 100% insertion of screw and at 30° angle of insertion to prototype, whereas maximum modulus of toughness was observed for rectilinear pattern with 100% insertion of screw and 20° angle of insertion. Further morphological study was performed on the fractured surface to support the mechanical results obtained by pull-out test for ensuring shear resistance. Overall the study will be useful for an orthopaedic surgeon for ensuring angle, depth of insertion and infill pattern selection for minimising the shear fracture of the scaffold.
- 2 September 2020
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 35 (11) , 2105-2124
Multi material 3D printing of PLA-PA6/TiO2 polymeric matrix: Flexural, wear and morphological properties
The poly-lactic acid (PLA), bio compatible polyamide (PA6) and TiO2 has established bio-medical applications especially in 3D printing of scaffolds. But hitherto little has been reported on improving the performance of multi-material matrix for PLA-PA6/TiO2 especially in 3D printing application of biomedical scaffolds. The anti-bacterial properties of PA6/TiO2 make it worthy to be explored with PLA matrix in multi layered fashion on the platform of fused deposition modeling (FDM) being low cost 3D printing technology for in house development of scaffolds. In this work an effort has been made for in-house development of feedstock filaments of PLA and PA6/TiO2 based polymeric composite matrix on twin screw extrusion (TSE) machine. Further the feedstock filament wires were used on FDM to establish the flexural, wear and morphological properties of multi-material 3D printed functional prototype. The results of the study suggest that for flexural strength, infill speed: 90mm/s; infill pattern: triangular and layer combination as 5 consecutive layers of PLA and 5 consecutive layers of PA6/TiO2 are the optimized conditions for FDM printing. The wear testing results suggest that the composite of PA6/TiO2 held low wear rate (823 µm) in comparison to PLA (wear rate: 1092 µm). Further porosity testing (based upon optical photomicrographs) at ×100 and fractured surface analysis at ×30 supported the observed trends for flexural and wear testing. The photomicrographs of fractured surface were 3D rendered to predict the role of surface roughness (Ra) profile for flexural properties. The mechanical and morphological observations are also supported with scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) analysis.
- 2 September 2020
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 35 (11) , 2105-2124
Multi material 3D printing of PLA-PA6/TiO2 polymeric matrix: Flexural, wear and morphological properties
The poly-lactic acid (PLA), bio compatible polyamide (PA6) and TiO2 has established bio-medical applications especially in 3D printing of scaffolds. But hitherto little has been reported on improving the performance of multi-material matrix for PLA-PA6/TiO2 especially in 3D printing application of biomedical scaffolds. The anti-bacterial properties of PA6/TiO2 make it worthy to be explored with PLA matrix in multi layered fashion on the platform of fused deposition modeling (FDM) being low cost 3D printing technology for in house development of scaffolds. In this work an effort has been made for in-house development of feedstock filaments of PLA and PA6/TiO2 based polymeric composite matrix on twin screw extrusion (TSE) machine. Further the feedstock filament wires were used on FDM to establish the flexural, wear and morphological properties of multi-material 3D printed functional prototype. The results of the study suggest that for flexural strength, infill speed: 90mm/s; infill pattern: triangular and layer combination as 5 consecutive layers of PLA and 5 consecutive layers of PA6/TiO2 are the optimized conditions for FDM printing. The wear testing results suggest that the composite of PA6/TiO2 held low wear rate (823 µm) in comparison to PLA (wear rate: 1092 µm). Further porosity testing (based upon optical photomicrographs) at ×100 and fractured surface analysis at ×30 supported the observed trends for flexural and wear testing. The photomicrographs of fractured surface were 3D rendered to predict the role of surface roughness (Ra) profile for flexural properties. The mechanical and morphological observations are also supported with scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) analysis.