GDGargi Das

Gargi Das

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Gargi Das has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Energy dissipation during laminar planar jump of a generalised time-independent non-Newtonian liquid – An analytical approach

    by Banashree Samanta, Subhabrata Ray, Gargi Das

    This study presents an in-depth analysis of the energy dissipation and momentum balance during a laminar planar hydraulic jump in a viscous free surface flow, with shallow flow theory used to estimate the relevant jump parameters. The inclusion of momentum and kinetic energy correction factors incorporates the influence of the fluid nature. The fluid is described by the generalised Herschel–Bulkley model with Papanastasiou regularisation, which reduces to the Bingham plastic, power-law and Newtonian models under relevant limiting conditions. The analysis, extensively validated against experimental and simulated data, is explored to understand the physics of free surface flow during jump formation. Energy dissipation increases with an increase in the flow behaviour index n , flow consistency index k and yield stress τ o since each of them increases the apparent viscosity. Interestingly, it is higher in the supercritical (upstream) compared with the subcritical (downstream) zone. For constant discharge rate and film thickness, the specific energy depends on the velocity profile and is thus a function of n and τ o but not k, and the mechanism of influence of n and τ o are also different. For a generalised approach, energy dissipation and jump parameters are discussed as a function of relevant non-dimensional numbers obtained from SFT. Energy dissipation during a hydraulic jump in non-Newtonian liquids is a hitherto unexplored aspect. In fact, energy dissipation during a planar jump in a viscous Newtonian liquid is also rare, although hydraulic jumps are primarily used as energy dissipators in free surface flows.

  • Nanofluid induced droplet pinch-off in the jetting regime of liquid–liquid flow

    by Kunderu Pallavi, Chirodeep Bakli, Subhabrata Ray, Gargi Das

    This paper reports visualization-driven experiments of liquid–liquid co-flow in a millimetric T-junction geometry, using dilute silica-based nanofluids, de-ionized water, and surfactant (sodium dodecyl sulfate) solution as the aqueous phase and toluene as the organic phase. The results reveal three distinct characteristics of nanofluid induced droplet pinch-off at high throughputs which are not exhibited during droplet pinch-off by water and surfactant solution, viz., (i) under the same flow conditions, nanofluids uniquely produce stable monodisperse droplet/plugs in the jetting regime via an “exit pinch-off” mode while in the absence of nanoparticles in the aqueous phase, polydispersity results due to random pinch off; (ii) a distinct “widening jetting” pathway leads to an inverted dispersed regime (nanofluid droplets in toluene) that is not exhibited in the absence of nanoparticles; and (iii) the neck-thinning dynamics transition from a classical inertio-capillary power law (∼2/3) for water/surfactant solution to an exponential trend for nanofluids. The droplet formation regimes are presented as a phase diagram in non-dimensional coordinates, decided based on the dominating forces governing pinch-off under different flow conditions. Although these jetting types have been reported earlier, the formation of organic and aqueous phase droplets in response to the different jetting mechanisms is a hitherto unreported phenomenon. This study is of importance as stabilizing jetting, preserving monodispersity at high throughput, remains a practical and conceptual bottleneck. Furthermore, the qualitative regime phenomenology described in the paper can be valuable for both mesoscale droplet generation and understanding of interfacial physics.

  • Transient meniscus response in tilted cuvettes: Role of surface tension and tilting rate

    by Anirban Roy, Gopal Verma, Subhabrata Ray, Gargi Das, Chirodeep Bakli

    We investigate the dynamics of liquid emptying from hydrophilic cuvettes with square cross sections, focusing on the role of surface tension, cuvette dimensions, and tilting rate. While the static deformation of menisci is well-studied, the transient behavior during tilting—relevant to practical scenarios such as pouring and accidental toppling—remains limited to some theoretical studies only. Experiments with aqueous solutions of varying surface tension, achieved via surfactant addition, reveal that lower surface tension accelerates the advancement of the contact line and facilitates meniscus deformation. However, body force as a combination of gravity and centrifugal force plays a significant role in fluid redistribution in the cuvette, altering the spilling dynamics. Mapping these regimes for hydrophilic surfaces uncovers non-intuitive behavior not captured in prior studies. Notably, a stagnation phase is observed at moderate surface tensions, where capillary and gravitational forces balance, resulting in no net acceleration of the advancing meniscus. At extremely low surface tension, rapid interface deformation drives continuous acceleration. Furthermore, increasing cuvette size enhances the likelihood of spontaneous spilling, while unexpectedly, higher tilting rates can suppress spilling due to insufficient time for lateral spreading. The study provides a comprehensive force balance and regime map, elucidating the roles of surface tension and tilting dynamics in transient meniscus behavior. These insights are valuable for the design of open-ended microfluidic systems, industrial pouring processes, and biomedical devices where precise control of liquid transfer is critical.


  • Anomalous behavior of Taylor bubble rise in glycerol solutions–mechanistic insights and numerical simulations

    by Priyanka Priyanka, Gargi Das, Subhabrata Ray, Manish Kaushal, Debasish Sarker

    The present study reports a hitherto unexplored phenomenon during Taylor bubble rise through glycerol solutions of different concentrations. There are numerous studies on Taylor bubble rise through aqueous glycerol. These primarily focus on concentrated glycerol solutions (> 50%v/v) and report a decrease in rise velocity with increasing concentration. In the present study, experiments over 0–80%v/v glycerol solution reveal an anomalous trend. An increase in concentration from pure water results in a higher bubble rise velocity up to around 40%v/v, beyond which the rise velocity decreases with increasing concentration. The counterintuitive observation is investigated through extensive visualization using particle image velocimetry and videography, along with numerical simulations using COMSOL Multiphysics v6.0 and a theoretical analysis. We attribute this to the piecewise-linear variation of viscosity with concentration, with the point of inflection ∼ 40%v/v concentration. Thus, below this concentration, the more pronounced effect of density (through buoyancy effect) and surface tension compared to viscosity results in a higher radius at the bubble tip, implying a flatter nose, which leads to the unanticipated phenomenon. The increase in liquid film thickness with concentration is also sharper beyond the inflection point due to the combined effect of increasing viscosity and decreasing surface tension. The anomalous range of glycerol concentration is identified in terms of capillary and bond numbers. The anomaly is also rationalized based on its quantitative behavior. The findings deliver a fresh perspective on the intricate interplay of forces governing Taylor bubble motion in Newtonian media and contribute to a broader understanding of bubble dynamics.

  • To spill or not: Short-time pouring dynamics of a toppled liquid bottle

    by Anirban Roy, Avinash Kumar, Subhabrata Ray, Gargi Das, Chirodeep Bakli

    A typical culinary setting involves liquid condiments with different constitutive behaviors stored in jars, bottles, pitchers, or spouts. In the dynamic kitchen environment, handling these condiments might require pouring, drizzling, squeezing, or tapping, demonstrating the interplay of the container geometry, the fluid properties, and the culinary expertise. There is, of course, the occasional accidental toppling. We investigate the combined effects of surface properties, fluid properties, and confinement dimensions on the short-time spilling or pouring dynamics of a toppled cuvette. While attesting to the fact that smaller cuvettes (which can be termed as capillaries as well) do not spontaneously spill, larger cuvettes exhibit spilling dynamics that are dependent on the surface property, fluid viscosity, and flow rheology. For Newtonian liquids, it is observed that the spilling dynamics are determined largely by the coupling of viscous and gravity forces with surface properties, inducing non-intuitive behavior at higher conduit dimensions. The inclusion of rheology for non-Newtonian liquids in the soup makes the spilling dynamics not only an interplay surface and fluid properties but also a function of meniscus retraction demarcating a “splatter” of three regimes “not spilling,” “on the verge of spilling,” and “spontaneous spilling.” We not only delineate the interactions leading to meniscus motion but also provide a mapping on whether or not a container would spill if it is momentarily toppled and then immediately returned to upright position. This study aids in understanding the fascinating physics of fluid pouring dynamics and could lead to new kitchen, biomedical, and industrial technologies.


  • Gravity-driven granular drainage from a closed top quasi-two-dimensional rectangular channel

    by Ritwik Maiti, Gargi Das, Prasanta Kumar Das

    The study elucidates the physics of granular drainage from a closed-top quasi-two-dimensional (2D) rectangular channel through extensive visualization, image analysis, and digital particle image velocimetry measurements. Draining initiates at channel inclination slightly above the material repose angle and occurs as avalanche flow, augmented by bubbling at higher channel tilts. However, close to vertical orientation, avalanche flow ceases, resulting in slower emptying. A wide array of drainage patterns is exhibited as function of channel inclination, width, and grain size. Qualitative and quantitative analyses reveal fascinating self-similarity in the different regimes amidst the apparent randomness. Scaling relationships are proposed for drainage time and velocity profile in the moving layer during quasi-steady drainage. Additionally, a depth-averaged continuum model, based on experimental observations, is formulated for the prediction of the moving layer thickness.


  • Open Access

    Analysis of natural planar jump in power-law liquids—A generalized “shallow flow” approach

    by Banashree Samanta, Manish Kaushal, Gargi Das, Subhabrata Ray

    The study presents a generalized “shallow flow” analysis of natural planar hydraulic jump in power-law liquids. It is based on self-similar velocity profile defined as function of flow behavior index, n, and shows significant improvement over the previous analysis which assumed a quadratic velocity profile and failed for n < 0.5. Thus, the study enables a deeper understanding of the influence of n for shear thinning vis-a-vis shear thickening liquids and emphasizes that the power-law description is adequate for highly shear thinning liquids if the flow parameters are valid over the range of interest.


  • Draining of shear-thinning liquids from closed-top millichannels

    by Banashree Samanta, Priyanka, Anirban Roy, Subhabrata Ray, Chirodeep Bakli, Gargi Das, Manish Kaushal

    Draining from a closed-top tube occurs by downward displacement of liquid by air. The air volume grows inside the tube as an axisymmetric bullet-shaped finger similar to the Taylor bubble observed in gas–liquid slug flows, and the liquid drains as an annular film between the finger and the tube wall. The present study investigates the draining of shear-thinning vis-à-vis Newtonian liquids from closed-top circular millichannels. Numerical simulations using the phase-field method suggest that both the power law and Carreau models give close predictions of draining behavior in the investigated domain, i.e., for shear rate >0.1 s−1. The results are validated against experimental measurements based on high-speed photography and particle image velocimetry during the draining of aqueous solutions of carboxymethyl cellulose, xanthan gum, and glycerol. Further validations are performed for shear-thinning (using the power law, Carreau, and Carreau–Yasuda models) and Newtonian liquids with literature data on Taylor bubble rise in stationary liquid columns. The simulations using the power law model are used to explore additional insights into the flow physics. An increase in the apparent viscosity of shear-thinning liquids (by increasing the flow behavior index and/or flow consistency index) slows down the rate of Taylor finger growth. Increased liquid viscosity also results in a slender Taylor finger and leaves a higher amount of undrained liquid at the end of film-wise draining. The draining rate is a more significant function of flow behavior index n of the power law model for highly shear-thinning liquids (n < 0.6).