NNNicholas V. Nardelli

Nicholas V. Nardelli

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Nicholas V. Nardelli has a total of 97 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • High-performance source of indistinguishable polarization-entangled photons with a local oscillator reference for quantum networking

    by Michael Grayson, Shawn Meyer, Daniel Sorensen, Abigail Gookin, Markus Allgaier, Nicholas V. Nardelli, Tara M. Fortier, Dileep V. Reddy, Thomas Schibli, Martin J. Stevens, et al.

    Optical quantum networking protocols impose stringent requirements on the states produced by sources of entanglement. We demonstrate a free-space, compact source of indistinguishable pairs of polarization-entangled photons, with an integrated local oscillator reference as a significant step towards this goal. This source achieves (99.11±0.01)% polarization entanglement visibility, (96.3±0.6)% successive-photon Hong–Ou–Mandel interference visibility, (68.0±0.1)% heralded efficiency as detected, and (88.6±0.2)% interference visibility with a local oscillator. This simultaneous achievement of state-of-the-art metrics demonstrates an adaptable platform for quantum networking.

  • Open Access

    Doppler-shift mitigation in a chip-scale atomic beam clock

    by Alexander Staron, Gabriela Martinez, Nicholas Nardelli, Travis Autry, John Kitching, William McGehee

    Chip-scale microwave atomic systems based on thermal atomic beams offer a promising approach to realize low-power and low-drift clocks for timing holdover applications. Miniature beam clocks are expected to suppress many of the shifts that commonly limit existing chip-scale atomic clocks based on coherent population trapping, including collisional shifts and some light shifts. However, the beam geometry can amplify some challenges such as Doppler shifts, which generate a strong sensitivity to laser frequency variation. Using a centimeter-scale 87 Rb atom beam clock, we identify a surprisingly strong competition between Doppler shifts and resonant light shifts arising from asymmetric decay in the clock spectroscopy Λ -system. Leveraging this competition between Doppler and resonant light shifts, we demonstrate clock operation at specific, convenient experimental parameters consistent with zero sensitivity to laser frequency variation and white-noise-limited clock frequency averaging for 1000 s of integration.


  • Phase-stable optical fiber links for quantum network protocols

    by Nicholas Nardelli, Dileep Reddy, Michael Grayson, Daniel Sorensen, Martin Stevens, Michael Mazurek, Lynden Shalm, T. M. Fortier

    We demonstrate the distribution of single-photon-level pulses from a mode-locked laser source over a phase-stable fiber link, achieving an optical timing jitter of less than 100 as over 10 minutes of data accumulation. This stability enables a fidelity greater than 0.998 between two stabilized 2.1 km long deployed fiber links. Building on time and frequency metrology techniques traditionally used for high-stability optical atomic clock signal distribution, we use time and frequency multiplexing to achieve an isolation of quantum and classical channels of 8×10 10 . Our results mark a necessary step towards scalable, high-rate quantum networks with a provable quantum advantage.


  • Open Access

    Sub-femtosecond stabilization of multicore fiber for high-fidelity quantum networking at 100% duty cycle

    by Takuma Nakamura, Nazanin Hoghooghi, Nicolas Fontaine, Tetsuya Hayashi, Takuji Nagashima, Nicholas V. Nardelli, Dileep V. Reddy, Martin J. Stevens, Tara Fortier, Lynden K. Shalm, et al.

    Originally envisioned as a solution for the capacity crunch in telecommunications networks, multicore fibers (MCFs) are contributing to scientific fields beyond telecom, such as sensing and metrology. Confined within the same cladding, the cores of MCF have a high degree of noise correlation, which can be harnessed for a variety of applications. Here, we investigate MCF as a solution to the challenging problem of quantum and classical light co-existence in phase-stabilized quantum networks by operating the quantum and stabilization light in separate but highly correlated cores of a 7-core MCF. Over 40 km of spooled fiber, we achieved 100 attosecond integrated jitter on one core by using phase information derived from another core. This allows for 100% duty cycle on a quantum channel while maintaining a low spurious photon rate from optical crosstalk. With cycle-slip-free stabilization over 6 hours, frequency detuning between designated stabilization and quantum channels, and an additional 40 dB rejection of noise photons provided by the low optical crosstalk between cores, we achieved a Raman scattering-induced spurious photon rate of only 0.01 photons/s in 100 GHz bandwidth. Our results with MCF demonstrate a promising approach to ultra-stable quantum networks with 100% duty cycle on the quantum channel.


  • Open Access

    Radio Frequency From Optical With Instabilities Below 10-15-Generation and Measurement

    by Archita Hati, Marco Pomponio, Nicholas V. Nardelli, Tanner Grogan, Kyungtae Kim, Dahyeon Lee, Jun Ye, Tara M. Fortier, Andrew Ludlow, Craig W. Nelson

    This paper presents a frequency synthesis that achieves exceptional stability by transferring optical signals to the radio frequency (RF) domain at 100 MHz. We describe and characterize two synthesis chains composed of a cryogenic silicon cavity-stabilized laser at 1542 nm and an ultra-low expansion (ULE) glass cavity at 1157 nm, both converted to 10 GHz signals via Ti:Sapphire and Er/Yb:glass optical frequency combs (OFCs). The 10 GHz microwave outputs are further divided down to 100 MHz using a commercial microwave prescaler, which exhibits a residual frequency instability of $\sigma _{y}({1}~\text {s})\lt {10}^{-{15}}$ and low 10-18 level at a few thousand seconds. Measurements are performed using a newly developed custom ultra-low-noise digital measurement system and are compared to the carrier-suppression technique. The new system enables high-sensitivity evaluation across the entire synthesis chain, from the optical and microwave heterodynes as well as the direct RF signals. Results show an absolute instability of ${\sigma }_{y}({1}~\text {s})~\approx ~{4.7}\times {10}^{-{16}}$ at 100 MHz. This represents the first demonstration of such low instability at 100 MHz, corresponding to a phase noise of −140 dBc/Hz at a 1 Hz offset and significantly surpassing earlier systems. These advancements open new opportunities for precision metrology and timing systems.


  • Top Cited Papers

    High-Stability Single-Ion Clock with 5.5×10−19 Systematic Uncertainty

    by Mason C. Marshall, Daniel A. Rodriguez Castillo, Willa J. Arthur-Dworschack, Alexander Aeppli, Kyungtae Kim, Dahyeon Lee, William Warfield, Joost Hinrichs, Nicholas V. Nardelli, Tara M. Fortier, et al.

    We report a single-ion optical atomic clock with a fractional frequency uncertainty of 5.5×10^{-19} and fractional frequency stability of 3.5×10^{-16}/sqrt[τ/s], based on quantum logic spectroscopy of a single ^{27}Al^{+} ion. A cotrapped ^{25}Mg^{+} ion provides sympathetic cooling and quantum logic readout of the ^{27}Al^{+}^{1}S_{0}↔^{3}P_{0} clock transition. A Rabi probe duration of 1 s, enabled by laser stability transfer from a remote cryogenic silicon cavity across a 3.6 km fiber link, results in a threefold reduction in instability compared to previous ^{27}Al^{+} clocks. Systematic uncertainties are lower due to an improved ion trap electrical design, which reduces excess micromotion, and a new vacuum system, which reduces collisional shifts. We also perform a direction-sensitive measurement of the ac magnetic field due to the rf ion trap, eliminating systematic uncertainty due to field orientation.


  • Open Access

    Radio Frequency from Optical with Instabilities below $10^{-15}$- Generation and Measurement

    by A. Hati, M. Pomponio, N. V. Nardelli, T. Grogan, K. Kim, D. Lee, J. Ye, T. M. Fortier, A. Ludlow, C. W. Nelson

    This paper presents a frequency synthesis that achieves exceptional stability by transferring optical signals to the radio frequency (RF) domain at 100 MHz. We describe and characterize two synthesis chains composed of a cryogenic silicon cavity-stabilized laser at 1542 nm and an ultra-low expansion (ULE) glass cavity at 1157 nm, both converted to 10 GHz signals via Ti:Sapphire and Er/Yb:glass optical frequency combs (OFCs). The 10 GHz microwave outputs are further divided down to 100 MHz using a commercial microwave prescaler, which exhibits a residual frequency instability of $σ_y(1~\text{s})<10^{-15}$ and low $10^{-18}$ level at a few thousand seconds. Measurements are performed using a newly developed custom ultra-low-noise digital measurement system and are compared to the carrier-suppression technique. The new system enables high-sensitivity evaluation across the entire synthesis chain, from the optical and microwave heterodynes as well as the direct RF signals. Results show an absolute instability of $σ_y(1~\text{s})~\approx~4.7\times10^{-16}$ at 100 MHz. This represents the first demonstration of such low instability at 100 MHz, corresponding to a phase noise of -140 dBc/Hz at a 1 Hz offset and significantly surpassing earlier systems. These advancements open new opportunities for precision metrology and timing systems.

  • Cryogenic sapphire optical reference cavity with crystalline coatings at 1 × 10−16 fractional frequency instability

    by Jose Valencia, George Iskander, Nicholas V. Nardelli, David R. Leibrandt, David B. Hume

    The frequency stability of a laser locked to an optical reference cavity is fundamentally limited by thermal noise in the cavity length. These fluctuations are linked to material dissipation, which depends on both the temperature of the optical components and the material properties. Here, the design and experimental characterization of a sapphire optical cavity operated at 10 K with crystalline coatings at 1069 nm is presented. Theoretical estimates of the thermo-mechanical noise indicate a thermal noise floor below 4.5 × 10−18. Major technical noise contributions including vibrations, temperature fluctuations, and residual amplitude modulation are characterized in detail. The short-term performance is measured via a three-cornered hat analysis with two other cavity-stabilized lasers, yielding a noise floor of 1 × 10−16. The long-term performance is measured against an optical lattice clock, indicating cavity stability at the level of 2 × 10−15 for averaging times up to 10 000 s.


  • Enabling phase-stable quantum protocols over optical fiber networks

    by N. V. Nardelli, L. K. Shalm, M. D. Mazurek, T. M. Fortier

    We present a path length stabilization protocol using interleaved photonic classical and quantum channels through a 200 m fiber link and demonstrate a phase drift < λ⁄50 over 10 minutes.

  • Optical and Microwave Metrology at the 10−18 Level with an Er/Yb:glass Frequency Comb

    by Nicholas V. Nardelli, Holly Leopardi, Thomas R. Schibli, Tara M. Fortier

    Optical frequency combs are essential tools for precision metrology experiments ranging in application from remote spectroscopic sensing of trace gases to the characterization and comparison of optical atomic clocks for precision time‐keeping and searches for physics beyond the standard model. Presented here is a description of the architecture and a full characterization of a telecom‐band, self‐modelocking frequency comb based on a free‐space laser with an Er/Yb co‐doped glass gain medium. The laser provides a robust and cost‐effective alternative to Er:fibre laser based frequency combs, while offering stability and noise performance similar to Ti:sapphire laser systems. Finally, the utility of the Er/Yb:glass frequency comb is demonstrated in high‐stability frequency synthesis using two ultra‐stable optical references at 1157 nm and 1070 nm and in low‐noise photonic microwave generation by dividing these references to the microwave domain.