Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Alessandro Tontini has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Fully Integrated Quantum Random Number Generator for Cryptographic Application

    by Nicola Massari, Luca Parmesan, Alessandro Tontini, Sonia Mazzucchi, Miloš Grujić, Ingrid Verbauwhede, Andreas Brenneis, Dayo Oshinubi, Ingo Herrmann, Thomas Strohm

    A compact quantum random number generator (QRNG) based on an array of Single Photon Avalanche Diodes (SPADs) is presented here. The main feature of the proposed chip is the capability to generate random numbers without the use of any external source of light. In this view, SPADs are configured to be used in two ways: 1) as a controlled light emitter and 2) as a detector. An embedded logic is able to distinguish dark events against detected emitted photon in such a way to make the system sensitive only to the presence of light. The extracted random bits show a uniform distribution and the QRNG, thanks to an integrated conditioning block maximizing the output entropy, eventually passes all AIS31 tests. The average raw bit rate in the default device configuration (one enabled column) is measured equal to 800 kbps.

  • Open Access

    Real-time waveguided quantum ghost imaging

    by Alexander Demuth, Robin Camphausen, Massimo Gandola, Enrico Manuzzato, Alessandro Tontini, Leonardo Gasparini, Valerio Pruneri

    Imaging through waveguides such as optical fibers enables visualization of otherwise inaccessible regions, including deep biological tissue in endoscopy. Here, we demonstrate real-time waveguided quantum ghost imaging (wQGI) using a bright quantum light source and a single-photon avalanche diode image sensor. Our wide-field wQGI approach requires no active modulation and produces real-time coincidence images directly, due to the imager’s on-chip, in-pixel correlation logic. Using a standard, commercial off-the-shelf fiber bundle compatible with standard endoscopic setups, we validate our system on test samples and quantitatively compare image quality to standard free-space QGI. QGI can enhance the signal-to-noise ratio in the low-photon regime. It also enables imaging at wavelengths where conventional image sensors lack sensitivity. The demonstrated platform thus provides a viable approach to non-invasive, low-light imaging in spectral regions not accessible by standard sensors.


  • Open Access

    A Post-Processing Histogram Compensation Method for SPAD-Based d-ToF LiDAR Systems for High Photon Flux Measurements

    by Alessandro Tontini, Sonia Mazzucchi, Roberto Passerone, Leonardo Gasparini

    In this study, we introduce a histogram post-processing technique for Single Photon Avalanche Diode (SPAD)-based direct Time of Flight (d-ToF) depth measurement systems, designed to address the non-linearity inherent in SPAD behavior. The technique has been developed to mitigate the distortion of the histogram of timestamps known as pile-up, which results in non-existing fluctuations of the recorded background and reflected laser light. Because of pile-up, accuracy issues arise in the target depth estimation, ultimately limiting the measurement range. The problem is typically addressed implementing sophisticated algorithms to process the histogram of timestamps, with a direct impact on system complexity, frame rate and power consumption. Our method approximates a linear behavior of the SPAD over time by compensating the histogram of timestamps with its own cumulative distribution function (CDF), thereby producing a linearized histogram even in the presence of intense background illumination or strong laser echo, beyond the commonly recognized limit of 5% detection ratio. We first demonstrate the compensation process with simulations, based on a physical model for the computation of the optical power budget and a numerical engine for the generation of the simulated train of timestamps. In particular, we consider a set of realistic parameters for typical SPAD-based d-ToF sensors, allowing us to validate the compensation method over a wide range of values. Then, we validate the method performance using real data obtained from an existing d-ToF sensor. The experimental validation confirms the validity of the method to mitigate accuracy errors due to pile-up with varying target reflectivities, with an improvement of ≈ 73% and ≈ 57% for Lambertian and retroreflective surfaces, respectively. Finally, we analyze the behavior of the method over three different ToF extraction algorithms, demonstrating that the measurement range can be extended by more than 50%. Moreover, thanks to the linear shape of the compensated histogram, even a lightweight and computationally inexpensive ToF extraction algorithm as a peak detector can be successfully employed with benefits in terms of system complexity, frame rate and power consumption.


  • Open Access

    Histogram-Less LiDAR Through SPAD Response Linearization

    by Alessandro Tontini, Sonia Mazzucchi, Roberto Passerone, Nicolò Broseghini, Leonardo Gasparini

    We present a new method to acquire the 3D information from a SPAD-based direct-Time-of-Flight (d-ToF) imaging system which does not require the construction of a histogram of timestamps and can withstand high flux operation regime. The proposed acquisition scheme emulates the behavior of a SPAD detector with no distortion due to dead time, and extracts the TOF information by a simple average operation on the photon timestamps ensuring ease of integration in a dedicated sensor and scalability to large arrays. The method is validated through a comprehensive mathematical analysis, whose predictions are in agreement with a numerical Monte Carlo model of the problem. Finally, we show the validity of the predictions in a real d-ToF measurement setup under challenging background conditions well beyond the typical pile-up limit of 5% detection rate up to a distance of 3.8 m.


  • Open Access

    Histogram-less LiDAR through SPAD response linearization

    by Alessandro Tontini, Sonia Mazzucchi, Roberto Passerone, Nicolò Broseghini, Leonardo Gasparini

    We present a new method to acquire the 3D information from a SPAD-based direct-Time-of-Flight (d-ToF) imaging system which does not require the construction of a histogram of timestamps and can withstand high flux operation regime. The proposed acquisition scheme emulates the behavior of a SPAD detector with no distortion due to dead time, and extracts the Tof information by a simple average operation on the photon timestamps ensuring ease of integration in a dedicated sensor and scalability to large arrays. The method is validated through a comprehensive mathematical analysis, whose predictions are in agreement with a numerical Monte Carlo model of the problem. Finally, we show the validity of the predictions in a real d-ToF measurement setup under challenging background conditions well beyond the typical pile-up limit of 5% detection rate up to a distance of 3.8 m.

  • Comparative evaluation of background-rejection techniques for SPAD-based LiDAR systems

    by Alessandro Tontini, Leonardo Gasparini, Enrico Manuzzato, Matteo Perenzoni, Roberto Passerone


  • Open Access

    An optical chip for self-testing quantum random number generation

    by Nicolò Leone, Davide Rusca, Stefano Azzini, Giorgio Fontana, Fabio Acerbi, Alberto Gola, Alessandro Tontini, Nicola Massari, Hugo Zbinden, Lorenzo Pavesi

    We present an implementation of a semi-device-independent protocol of the generation of quantum random numbers in a fully integrated silicon chip. The system is based on a prepare-and-measure scheme, where we integrate a partially trusted source of photons and an untrusted single photon detector. The source is a silicon photomultiplier, which emits photons during the avalanche impact ionization process, while the detector is a single photon avalanche diode. The proposed protocol requires only a few and reasonable assumptions on the generated states. It is sufficient to measure the statistics of generation and detection in order to evaluate the min-entropy of the output sequence, conditioned on all possible classical side information. We demonstrate that this protocol, previously realized with a bulky laboratory setup, is totally applicable to a compact and fully integrated chip with an estimated throughput of 6 kHz of the certified quantum random bit rate.


  • Open Access

    Numerical Model of SPAD-Based Direct Time-of-Flight Flash LIDAR CMOS Image Sensors

    by Alessandro Tontini, Leonardo Gasparini, Matteo Perenzoni

    We present a Montecarlo simulator developed in Matlab® for the analysis of a Single Photon Avalanche Diode (SPAD)-based Complementary Metal-Oxide Semiconductor (CMOS) flash Light Detection and Ranging (LIDAR) system. The simulation environment has been developed to accurately model the components of a flash LIDAR system, such as illumination source, optics, and the architecture of the designated SPAD-based CMOS image sensor. Together with the modeling of the background noise and target topology, all of the fundamental factors that are involved in a typical LIDAR acquisition system have been included in order to predict the achievable system performance and verified with an existing sensor.


  • SPAD-Based Quantum Random Number Generator With an $N^{\rm{th}}$ -Order Rank Algorithm on FPGA

    by Alessandro Tontini, Leonardo Gasparini, Nicola Massari, Roberto Passerone

    We present a compact, all-solid-state, low-cost quantum random number generator (QRNG) based on a Single-Photon Avalanche Diode (SPAD) and a Field Programmable Gate Array (FPGA). A new algorithm for random bit generation is described, ranking the inter-arrival times of a group of M photons detected by the SPAD device, and processed directly on the FPGA. The proposed approach improves the efficiency of generated random bits per detected photon, spanning from 0.5 bits/photon in case of 0 order rank, up to 0.875 bits/photon for 2nd order rank. By extending the algorithm to higher orders, the proposed system approaches the maximum theoretical value of 1.0 bit/photon. The rate of generation of random numbers is limited by the SPAD minimum deadtime, achieving an experimentally proven bit rate of 7.3 Mbps. The standard randomness statistical tests are passed for a wide range of photon fluxes and for all the implemented rank orders with no additional post-processing on the generated sequence.