SSSeyedmohammadhadi M. Hadi Sadati

Seyedmohammadhadi M. Hadi Sadati

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Seyedmohammadhadi M. Hadi Sadati has a total of 99 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • 6-D Tip Wrench Estimation for Continuum Robots: A Koopman-UKF-Wrench Decomposition Approach

    by Lingyun Zeng, S. M. Hadi Sadati, Lukas Lindenroth, Christos Bergeles

    This paper presents a method for comprehensive 6D estimation of tip wrench for generally deflected static elastic rods. Current methods for load estimation are restricted to estimating lateral (point or distributed) forces for (quasi-)planar deformation; estimation of tangential force and moment, i.e., the full 6D wrench, remains largely unreliable due to the ill-posed nature of the problem. To address this challenge, this paper begins by proposing a high-fidelity static rod model that leverages Koopman Operator theory. Building on this model and utilizing shape feedback, a computationally efficient three-step wrench estimator is proposed: (i) a Koopman-UKF local moment observer, (ii) a static equilibrium solver, and (iii) a rod model propagator. Then, a 2D wrench screw system, identified as the insensible wrench in the initial estimation, elucidates error sources and informs strategies to enhance accuracy by incorporating additional feedback, such as the rod tip material frame and base axial force. Ultimately, the framework delivers accurate 6D tip wrench estimation with quantified uncertainty. Simulation and experimental evaluations validate its effectiveness, demonstrating mean errors of $53.14\,$mN (1.94%) and $2.65\,$mNm (7.18%) for a $159\,$mm-long Nitinol tube undergoing complex out-of-plane deformations, outperforming three replicated state-of-the-art methods. Additionally, its applicability to more complex continuum robots is demonstrated through load estimation on a Parallel Continuum Robot.

  • Open Access

    Toward AI Autonomous Navigation for Mechanical Thrombectomy Using Hierarchical Modular Multi-Agent Reinforcement Learning (HM-MARL)

    by H. Robertshaw, N. Fischer, L. Karstensen, B. Jackson, X. Chen, S. M. Hadi Sadati, C. Bergeles, A. Granados, T. C. Booth

    Mechanical thrombectomy (MT) is typically the optimal treatment for acute ischemic stroke involving large vessel occlusions, but access is limited due to geographic and logistical barriers. Reinforcement learning (RL) shows promise in autonomous endovascular navigation, but generalization across ‘long’ navigation tasks remains challenging. We propose a Hierarchical Modular Multi-Agent Reinforcement Learning (HM-MARL) framework for autonomous two-device navigation in vitro, enabling efficient and generalizable navigation. HM-MARL was developed to autonomously navigate a guide catheter and guidewire from the femoral artery to the internal carotid artery (ICA). A modular multi-agent approach was used to decompose the complex navigation task into specialized subtasks, each trained using Soft Actor-Critic RL. The framework was validated in both in silico and in vitro testbeds to assess generalization and real-world feasibility. In silico, a single-vasculature model achieved 92–100% success rates on individual anatomies, while a multi-vasculature model achieved 56–80% across multiple patient anatomies. In vitro, both HM-MARL models successfully navigated 100% of trials from the femoral artery to the right common carotid artery and 80% to the right ICA but failed on the left-side vessel superhuman challenge due to the anatomy and catheter type used in navigation. This study presents the first demonstration of in vitro autonomous navigation in MT vasculature. While HM-MARL enables generalization across anatomies, the simulation-to-real transition introduces challenges. Future work will refine RL strategies using world models and validate performance on unseen in vitro data, advancing autonomous MT towards clinical translation.


  • Open Access

    State of the art in soft eversion robots for colonoscopy: a review

    by Cem Suulker, Thomas Mack, Giovanni Distefano, Chi Ho Chan, Ketao Zhang, S M Hadi Sadati, Laura Mecozzi, Shifa Sulaiman, Mohamed Adhnan Thaha, Fanny Ficuciello, et al.

    This review explores the current state of eversion robotics in the context of colonoscopy, given the need for less invasive, more patient-friendly screening technologies. Conventional colonoscopy often leads to discomfort and patient reluctance, contributing to delayed diagnoses and high colorectal cancer mortality rates. Eversion robots, also known as vine robots or soft growing robots are soft, pressure-driven devices that extend by everting from the tip whilst offering a promising option by enabling frictionless advancement and potentially pain-free procedures. We examine the key challenges and opportunities in adapting eversion robots for clinical endoscopic use, focusing on material selection, actuation, steering, and payload delivery. From the literature, thermoplastic polyurethane emerges as the most viable material for the robot’s sleeve due to its airtightness, biocompatibility, suitability for heat or ultrasonic welding, and availability in highly flexible thin layers. Tip-steering mechanisms are identified as the most effective strategies for navigation, allowing high flexibility without increasing the wall thickness of the robot, as required in alternative approaches using distributed actuation mechanisms. The review also evaluates strategies for integrating functional tools at the tip of the robot, concluding that cap-free designs provide superior adaptability to the varying colon diameter, preserve compressibility, and keep tip friction to a minimum, unlike cap-based payload delivery methods. By consolidating current research and identifying pathways for innovation, this review supports the development of eversion soft robots as a next-generation solution for minimally invasive colorectal diagnostics and therapy.


  • Open Access

    Phase‐Change Alloys Enable Localized Reversible Stiffening and Actuation in Steerable Eversion Tip‐Growing Robots

    by Shamsa Al Harthy, S.M.HAdi Sadati, Shannon C. Stockdale, Radhouene Neji, Christos Bergeles

    Tip‐growing eversion robots navigate complex, constrained environments through pressure‐driven shear‐free material unfolding at the tip—a locomotion strategy ideal for intraluminal interventions. However, their flexibility limits their force exertion and payload delivery, makes them prone to buckling under compressive loads, and causes reliance on environmental support in tortuous pathways. To address this, phase‐changing low‐melting point alloy media are introduced to simultaneously achieve localized reversible stiffening and fluidic actuation. By modulating the alloy's thermal state, the robot switches between compliant and rigid states, achieving a stiffness ratio of 43‐ and a 15‐fold force increase. A bespoke steerable catheter within the robot's lumen locally modulates heating and steering, enabling for the first time segmental control and hybrid soft‐rigid eversion robot morphologies. To unlock robust, selective actuation and prevent thermal damage, the system's thermal response is optimized through spatial profiling and timing control of heating cycles. This ensures rapid, localized phase transitions without thermal spillover. The robot demonstrates physically intelligent stiffening and navigation, selectively isolating mechanical forces and adapting its morphology to fit the task at hand. Its capabilities are validated in constrained pathway navigation, force delivery, and steerability, highlighting its potential for next‐generation intraluminal interventions and soft robotic platforms.


  • Open Access

    Tip-Growing Robots: Design, Theory, Application

    by Shamsa Al Harthy, S.M. Hadi Sadati, Cédric Girerd, Sukjun Kim, Alessio Mondini, Zicong Wu, Brandon Saldarriaga, Carlo A. Seneci, Barbara Mazzolai, Tania K. Morimoto, et al.

    Growing robots apically extend through material eversion or deposition at their tip. This endows them with unique capabilities, such as follow the leader navigation, long-reach, inherent compliance, and large force delivery bandwidth. Tip-growing robots can therefore conform to sensitive, intricate, and difficult-to-access environments. This review article categorizes, compares, and critically evaluates state-of-the-art growing robots with emphasis on their designs, fabrication processes, actuation and steering mechanisms, mechanics models, controllers, and applications. Finally, this article discusses the main challenges that the research area still faces and proposes future directions.


  • Open Access

    Semiautonomous Robotic Manipulator for Minimally Invasive Aortic Valve Replacement

    by Izadyar Tamadon, S. M. Hadi Sadati, Virginia Mamone, Vincenzo Ferrari, Christos Bergeles, Arianna Menciassi

    Aortic valve surgery is the preferred procedure for replacing a damaged valve with an artificial one. The ValveTech robotic platform comprises a flexible articulated manipulator and surgical interface supporting the effective delivery of an artificial valve by teleoperation and endoscopic vision. This article presents our recent work on force-perceptive, safe, semiautonomous navigation of the ValveTech platform prior to valve implantation. First, we present a force observer that transfers forces from the manipulator body and tip to a haptic interface. Second, we demonstrate how hybrid forward/inverse mechanics, together with endoscopic visual servoing, lead to autonomous valve positioning. Benchtop experiments and an artificial phantom quantify the performance of the developed robot controller and navigator. Valves can be autonomously delivered with a 2.0±0.5 mm position error and a minimal misalignment of 3.4±0.9°. The hybrid force/shape observer (FSO) algorithm was able to predict distributed external forces on the articulated manipulator body with an average error of 0.09 N. FSO can also estimate loads on the tip with an average accuracy of 3.3%. The presented system can lead to better patient care, delivery outcome, and surgeon comfort during aortic valve surgery, without requiring sensorization of the robot tip, and therefore obviating miniaturization constraints.


  • Vision-Based Autonomous Steering of a Miniature Eversion Growing Robot

    by Zicong Wu, S. M. Hadi Sadati, Kawal Rhode, Christos Bergeles

    This paper presents vision-based autonomous navigation of a steerable soft growing robot. Our experimental platform is the previously presented MAMMOBOT, which is a small-diameter eversion growing robot with an embedded steerable catheter. The current manuscript first models the robot using kinematics (constant curvature) and mechanics (virtual work). Modelling considers the potential misalignment between the everting sheath and the embedded catheter. Second, a switching control architecture is proposed, wherein a model-based controller is employed for rapid convergence to a target position, followed by a closed-loop proportional controller that minimises the system's steady-state error. Feedback is visually provided from a calibrated stereo vision system. Target-positioning and trajectory-tracking experiments are conducted to evaluate the performance of the control architecture. Experimental results demonstrate the superiority of the mechanics-based modelling and control approach, showing an average accuracy of $0.67\,$ mm (0.66% arclength) in target positioning experiments, and an accuracy of $0.72\,$ mm (1.11% arclength) and $0.72\,$ mm (1.01% arclength) for tracking a square trajectory and a circular trajectory, respectively. The autonomous steering framework is showcased within a 3D-printed mammary duct phantom. This work sets the stage for endoscope-based autonomous navigation of MAMMOBOT and similar soft growing steerable robots.


  • Open Access

    Sliding-surface dynamic control of a continuum manipulator with large workspace

    by Mohammad Sheikh Sofla, Mohammad Jafar Sadigh, S.M. Hadi Sadati, Christos Bergeles, Mohammad Zareinejad


  • Open Access

    Reduced order modeling and model order reduction for continuum manipulators: an overview

    by S.M.H. Sadati, S. Elnaz Naghibi, Lyndon da Cruz, Christos Bergeles

    Soft robot’s natural dynamics calls for the development of tailored modeling techniques for control. However, the high-dimensional configuration space of the geometrically exact modeling approaches for soft robots, i.e., Cosserat rod and Finite Element Methods (FEM), has been identified as a key obstacle in controller design. To address this challenge, Reduced Order Modeling (ROM), i.e., the approximation of the full-order models, and Model Order Reduction (MOR), i.e., reducing the state space dimension of a high fidelity FEM-based model, are enjoying extensive research. Although both techniques serve a similar purpose and their terms have been used interchangeably in the literature, they are different in their assumptions and implementation. This review paper provides the first in-depth survey of ROM and MOR techniques in the continuum and soft robotics landscape to aid Soft Robotics researchers in selecting computationally efficient models for their specific tasks.


  • Multi-directional Force and Tactile Sensor Sleeves for Micro Catheters and Cannulas

    by Joelle Sogunro, Xiaochong Wu, Carlo Saija, Basma Alabdullah, Joseph Rowell, Anhao Liu, Cristina Sanchez Fernandez, Kawal Rhode, Christos Bergeles, S. M. Hadi Sadati