Oleksii Pryimachenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Oleksii Pryimachenko has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Yurii Chovnyuk
Kyiv National University of Construction and Architecture
14 shared publications - Petro Cherednichenko
Київський національний університет будівництва і архітектури
11 shared publications - Nataliia Shudra
Київський національний університет будівництва і архітектури
6 shared publications - Oleksandra Cherednichenko
Київський національний університет будівництва і архітектури, Україна
5 shared publications Олексій Приймаченко
Київський національний університет будівництва і архітектури
5 shared publications- Liudmyla Zolotar
Kyiv National University of Construction and Architecture
3 shared publications
Latest Publications
- Open Access
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 116
Use of the Green's function method in the hyperbolic heat conduction theory and non-Fourier analysis of non-stationary thermoelastic fields (moving) deformed media/bodies and composite materials
The work develops precisely solvable models of pulse optics for dispersive, dissipative deformed media (bodies) and composite materials during their laser processing with short wave pulses. Unsteady thermoelastic fields excited by video pulses in these media (bodies) and materials are presented analytically thanks to exact periodic and unsteady solutions of thermoelasticity equations obtained directly in the time domain outside the limits of Fourier series by analogy with the well-known results of A.B. Schwarzburg. This study also obtained a hyperbolic heat conduction equation for a moving body and a solution to this equation in a cylindrical coordinate system using Green's functions. The solution obtained in this work corresponds to the hyperbolic theory of heat conduction, which takes into account the finiteness of the heat propagation velocity and allows for a more accurate assignment of strength standards for parts operating under thermodynamic stresses, and in technological processes, for example, in the problem of temperature field distribution in cylindrical samples during their processing with a grinding tool, to optimize the processing mode parameters.
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 116
Open AccessUse of the Green's function method in the hyperbolic heat conduction theory and non-Fourier analysis of non-stationary thermoelastic fields (moving) deformed media/bodies and composite materials
The work develops precisely solvable models of pulse optics for dispersive, dissipative deformed media (bodies) and composite materials during their laser processing with short wave pulses. Unsteady thermoelastic fields excited by video pulses in these media (bodies) and materials are presented analytically thanks to exact periodic and unsteady solutions of thermoelasticity equations obtained directly in the time domain outside the limits of Fourier series by analogy with the well-known results of A.B. Schwarzburg. This study also obtained a hyperbolic heat conduction equation for a moving body and a solution to this equation in a cylindrical coordinate system using Green's functions. The solution obtained in this work corresponds to the hyperbolic theory of heat conduction, which takes into account the finiteness of the heat propagation velocity and allows for a more accurate assignment of strength standards for parts operating under thermodynamic stresses, and in technological processes, for example, in the problem of temperature field distribution in cylindrical samples during their processing with a grinding tool, to optimize the processing mode parameters.
- Open Access
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 116
Fundamental analysis of the dynamics of discrete-continuous rotary systems of tracked machines with mechatronic control systems
When constructing a model of tracked machines, it is not possible to limit oneself to discrete parameters – masses and rigidities – if the shafts of the rotary system have significant masses and lengths. In long shaft lines, wave processes may occur under the action of external disturbances applied to the discrete masses of the system. The complexity of analyzing wave processes in discrete-continuous systems that arise in them when operating modes change forces us to look for simpler solution methods that still give satisfactory results in terms of accuracy. One such method is to replace the discrete-continuous model with a discrete one, which differs slightly in its dynamic properties from the original. In this case, the finite element method is used, into which each section of the shaft with discrete masses concentrated on it can be divided, and the shaft itself is a distributed mass. In this regard, there is a need to formulate a criterion that allows establishing an equivalent system of discrete masses that replace the discrete-continuous system. A similar task is the analysis of dynamic processes occurring in hydromechanical systems, which include long pipelines and large masses of hydraulic mechanism links. The paper presents equations of motion for a tracked vehicle shaft with distributed mass, analyzes a weighted shaft with masses at its ends, and determines the natural frequencies of a multi-mass rotary system of a tracked vehicle, taking into account the shaft mass. The Prager method was used to find the natural numbers of the system. The results of calculating the amplitudes of shaft vibrations can be used to find the maximum values of the moments of elastic forces of the shaft sections. The change in the moment of elastic forces has a beating character. Each of the natural frequencies of a system with several degrees of freedom corresponds to a certain form of vibration, therefore, at close values of natural frequencies, there is a continuous transition from one form of vibration to another and, accordingly, a periodic exchange of energy between individual sections of the system while maintaining their energy constant. Control over the movement of the system in transient processes (start-up) can be carried out by mechatronic control systems.
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 116
Open AccessFundamental analysis of the dynamics of discrete-continuous rotary systems of tracked machines with mechatronic control systems
When constructing a model of tracked machines, it is not possible to limit oneself to discrete parameters – masses and rigidities – if the shafts of the rotary system have significant masses and lengths. In long shaft lines, wave processes may occur under the action of external disturbances applied to the discrete masses of the system. The complexity of analyzing wave processes in discrete-continuous systems that arise in them when operating modes change forces us to look for simpler solution methods that still give satisfactory results in terms of accuracy. One such method is to replace the discrete-continuous model with a discrete one, which differs slightly in its dynamic properties from the original. In this case, the finite element method is used, into which each section of the shaft with discrete masses concentrated on it can be divided, and the shaft itself is a distributed mass. In this regard, there is a need to formulate a criterion that allows establishing an equivalent system of discrete masses that replace the discrete-continuous system. A similar task is the analysis of dynamic processes occurring in hydromechanical systems, which include long pipelines and large masses of hydraulic mechanism links. The paper presents equations of motion for a tracked vehicle shaft with distributed mass, analyzes a weighted shaft with masses at its ends, and determines the natural frequencies of a multi-mass rotary system of a tracked vehicle, taking into account the shaft mass. The Prager method was used to find the natural numbers of the system. The results of calculating the amplitudes of shaft vibrations can be used to find the maximum values of the moments of elastic forces of the shaft sections. The change in the moment of elastic forces has a beating character. Each of the natural frequencies of a system with several degrees of freedom corresponds to a certain form of vibration, therefore, at close values of natural frequencies, there is a continuous transition from one form of vibration to another and, accordingly, a periodic exchange of energy between individual sections of the system while maintaining their energy constant. Control over the movement of the system in transient processes (start-up) can be carried out by mechatronic control systems.
- Open Access
- 26 March 2026
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 17,p. 572-584
APPLICATION OF TIME SERIES FORECASTING METHODS IN THE TASKS OF FORMING AN EFFECTIVELY FUNCTIONING NETWORK OF WAREHOUSES IN LARGE CITIES OF UKRAINE
The paper presents a content analysis of the main methods of forecasting time series for solving problems of forming an effectively functioning network of warehouses: the simple moving average method, the weighted moving average method, the simple single-parameter exponential smoothing method, the two-parameter exponential smoothing method (Holt's method), the three-parameter exponential smoothing method (Winters' method), and the autoregression model. It is shown that warehouse management optimization is a rather complex task that requires a clear methodological approach and appropriate mathematical modelling. It is proven that the expansion of the warehouse network through the construction of new own warehouses, a change in position through the purchase of existing warehouses from the owner, or a combination of forms of warehouse ownership should be the result of research and scientifically based forecasts and calculations, where the decisive factor is the efficiency of the warehouse network and its economic feasibility in the process of further operation.
- 26 March 2026
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 17,p. 572-584
Open AccessAPPLICATION OF TIME SERIES FORECASTING METHODS IN THE TASKS OF FORMING AN EFFECTIVELY FUNCTIONING NETWORK OF WAREHOUSES IN LARGE CITIES OF UKRAINE
The paper presents a content analysis of the main methods of forecasting time series for solving problems of forming an effectively functioning network of warehouses: the simple moving average method, the weighted moving average method, the simple single-parameter exponential smoothing method, the two-parameter exponential smoothing method (Holt's method), the three-parameter exponential smoothing method (Winters' method), and the autoregression model. It is shown that warehouse management optimization is a rather complex task that requires a clear methodological approach and appropriate mathematical modelling. It is proven that the expansion of the warehouse network through the construction of new own warehouses, a change in position through the purchase of existing warehouses from the owner, or a combination of forms of warehouse ownership should be the result of research and scientifically based forecasts and calculations, where the decisive factor is the efficiency of the warehouse network and its economic feasibility in the process of further operation.
- Open Access
- 26 February 2026
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 16,p. 620-637
MODELLING THE OPTIMAL DISLOCATION OF WAREHOUSES WHEN PLACING THEM IN A CITY WAREHOUSE NETWORK
It is shown that decisions on the location of warehouses are made from the perspective of both microeconomics and macroeconomics of the company, as well as depending on the tasks that the company solves. It is shown that the problem of choosing the location of warehouses becomes relevant under certain specific urban planning circumstances. The main factors influencing the choice of warehouse location are indicated. The main strategies for warehouse location are considered: a) the strategy of locating warehouses relative to sales markets; b) the strategy of locating warehouses near production facilities; c) the strategy of intermediate warehouse location (the strategy of locating warehouses of logistics intermediaries); d) the strategy of locating warehouses in a network of cities, which takes into account their geographical location. When determining the number and optimal location of company warehouses, the latter requires a large amount of source information, the content and parameters of which are highlighted in the work. The criterion for optimizing the location of a warehouse in a specific territorial area of a city and the algorithm for its implementation are given. It is indicated that when making an informed decision on the formation of a warehouse network and determining its location, two basic principles should be followed: 1) minimum total costs associated with the operation of the warehouse network, taking into account construction costs; 2) maximum level of customer service. If these criteria are met, you can start developing a warehouse management project. It is noted that the rational location of warehouse facilities significantly affects the total volume of cargo flows and contributes to solving the problem of reducing transport and storage costs.
- 26 February 2026
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 16,p. 620-637
Open AccessMODELLING THE OPTIMAL DISLOCATION OF WAREHOUSES WHEN PLACING THEM IN A CITY WAREHOUSE NETWORK
It is shown that decisions on the location of warehouses are made from the perspective of both microeconomics and macroeconomics of the company, as well as depending on the tasks that the company solves. It is shown that the problem of choosing the location of warehouses becomes relevant under certain specific urban planning circumstances. The main factors influencing the choice of warehouse location are indicated. The main strategies for warehouse location are considered: a) the strategy of locating warehouses relative to sales markets; b) the strategy of locating warehouses near production facilities; c) the strategy of intermediate warehouse location (the strategy of locating warehouses of logistics intermediaries); d) the strategy of locating warehouses in a network of cities, which takes into account their geographical location. When determining the number and optimal location of company warehouses, the latter requires a large amount of source information, the content and parameters of which are highlighted in the work. The criterion for optimizing the location of a warehouse in a specific territorial area of a city and the algorithm for its implementation are given. It is indicated that when making an informed decision on the formation of a warehouse network and determining its location, two basic principles should be followed: 1) minimum total costs associated with the operation of the warehouse network, taking into account construction costs; 2) maximum level of customer service. If these criteria are met, you can start developing a warehouse management project. It is noted that the rational location of warehouse facilities significantly affects the total volume of cargo flows and contributes to solving the problem of reducing transport and storage costs.
- Open Access
- 30 October 2025
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 115
Spatial and temporal evolution of one-dimensional nonlinear deformation waves in cylindrical shells
In this paper, the physical-mechanical and mathematical models designed to analyze nonlinear wave formations in cylindrical elastic shells are substantiated. Using the perturbation reduction method, the spatial and temporal evolution of nonlinear longitudinal and longitudinal-shift waves in elastic cylindrical shells in the framework of Kirchhoff-Liave theory is investigated. It is established that in elastic cylindrical shells (in one-dimensional formulation of the problem) there exist one-dimensional solitons and nonlinear periodic waves (of the cnoidal type), which are partial solutions of the Korteweg-de Vries equation (KdV). All the main parameters of these types of waveforms are analytically found. Taking into account dissipative effects, the evolutionary Korteweg-de Vries-Bürgers equation (KDB), which is close to the integrated ones, was obtained for the longitudinal deformation component. Partial solutions of this equation in the form of kinks and waveforms, which are described by the elliptic Weierstrass function, have been found analytically (using the reduced expansion method). The analysis performed allows us to describe the spatial and temporal evolution of a weakly two-dimensional beam of nonlinear longitudinal and longitudinal-shift waves in an elastic cylindrical shell as follows. There is a fast (linear) time scale during which there exists a wave running without profile change with constant velocity. Further, there is a slower time scale, during which the change of wave parameters due to nonlinearity, dispersion, and diffraction divergence leads to the splitting of the initial pulse into one-dimensional (or weakly two-dimensional) solitons or the formation of cnoidal (periodic) waves. The interaction of longitudinal deformation waves unstable to transverse perturbations with longitudinal-shift waves (solitons/cnoidal waves) leads to their overturning and, possibly, to their destruction. This circumstance essentially distinguishes the spatial and temporal evolution of solitons in deformed solids from hydrodynamic solitons, which collapse gradually due to natural dissipation.
- 30 October 2025
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 115
Open AccessSpatial and temporal evolution of one-dimensional nonlinear deformation waves in cylindrical shells
In this paper, the physical-mechanical and mathematical models designed to analyze nonlinear wave formations in cylindrical elastic shells are substantiated. Using the perturbation reduction method, the spatial and temporal evolution of nonlinear longitudinal and longitudinal-shift waves in elastic cylindrical shells in the framework of Kirchhoff-Liave theory is investigated. It is established that in elastic cylindrical shells (in one-dimensional formulation of the problem) there exist one-dimensional solitons and nonlinear periodic waves (of the cnoidal type), which are partial solutions of the Korteweg-de Vries equation (KdV). All the main parameters of these types of waveforms are analytically found. Taking into account dissipative effects, the evolutionary Korteweg-de Vries-Bürgers equation (KDB), which is close to the integrated ones, was obtained for the longitudinal deformation component. Partial solutions of this equation in the form of kinks and waveforms, which are described by the elliptic Weierstrass function, have been found analytically (using the reduced expansion method). The analysis performed allows us to describe the spatial and temporal evolution of a weakly two-dimensional beam of nonlinear longitudinal and longitudinal-shift waves in an elastic cylindrical shell as follows. There is a fast (linear) time scale during which there exists a wave running without profile change with constant velocity. Further, there is a slower time scale, during which the change of wave parameters due to nonlinearity, dispersion, and diffraction divergence leads to the splitting of the initial pulse into one-dimensional (or weakly two-dimensional) solitons or the formation of cnoidal (periodic) waves. The interaction of longitudinal deformation waves unstable to transverse perturbations with longitudinal-shift waves (solitons/cnoidal waves) leads to their overturning and, possibly, to their destruction. This circumstance essentially distinguishes the spatial and temporal evolution of solitons in deformed solids from hydrodynamic solitons, which collapse gradually due to natural dissipation.
- Open Access
- 24 September 2025
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 14
ANALYSIS OF OSCILLATIONS (VIBRATION) OF STRUCTURAL ELEMENTS OF LIFTING MECHANISMS AND MACHINES
Cargo movement by hoisting mechanisms and machines used in urban construction, such as overhead cranes (OC) with non-rigid rope suspensions of the load causes pendulum vibrations of the load, in which there is an uncontrollable component. The oscillations significantly increase the cycle time of such OCs, reduce productivity and safety. There is a growing danger of collision of the load with objects present in the movement zone, and damage/destruction of the load, other objects and the OC itself is probable. In this regard, it is advisable to completely suppress uncontrolled components of pendulum oscillations of the load both during its movement and when the load reaches the target point. This is especially important when moving dangerous cargoes: containers with liquid materials (such as resin), flammable liquids, etc. During the operation of OC and other types of construction/cargo lifting cranes due to the swinging of the load on the rope there are significant dynamic loads. In this paper we analyze the regularities of the process of load oscillations on the basis of a two-mass model, taking into account the influence of initial conditions on the possible values of dynamic loads, as well as the possibility of optimizing (minimizing) these loads. The review of available reference and normative materials determining the normative values of dynamic coefficients is given. The results obtained in the paper can be further used for dynamic calculations, their improvement and refinement, for design and engineering development of finite element models of cantilever booms with loads on the rope and without rope during acceleration/deceleration in the process of boom rotation to substantiate the dynamic coefficients of specific designs of OC and urban construction cranes of other types.
- 24 September 2025
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 14
Open AccessANALYSIS OF OSCILLATIONS (VIBRATION) OF STRUCTURAL ELEMENTS OF LIFTING MECHANISMS AND MACHINES
Cargo movement by hoisting mechanisms and machines used in urban construction, such as overhead cranes (OC) with non-rigid rope suspensions of the load causes pendulum vibrations of the load, in which there is an uncontrollable component. The oscillations significantly increase the cycle time of such OCs, reduce productivity and safety. There is a growing danger of collision of the load with objects present in the movement zone, and damage/destruction of the load, other objects and the OC itself is probable. In this regard, it is advisable to completely suppress uncontrolled components of pendulum oscillations of the load both during its movement and when the load reaches the target point. This is especially important when moving dangerous cargoes: containers with liquid materials (such as resin), flammable liquids, etc. During the operation of OC and other types of construction/cargo lifting cranes due to the swinging of the load on the rope there are significant dynamic loads. In this paper we analyze the regularities of the process of load oscillations on the basis of a two-mass model, taking into account the influence of initial conditions on the possible values of dynamic loads, as well as the possibility of optimizing (minimizing) these loads. The review of available reference and normative materials determining the normative values of dynamic coefficients is given. The results obtained in the paper can be further used for dynamic calculations, their improvement and refinement, for design and engineering development of finite element models of cantilever booms with loads on the rope and without rope during acceleration/deceleration in the process of boom rotation to substantiate the dynamic coefficients of specific designs of OC and urban construction cranes of other types.
- Open Access
- 29 November 2024
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 10,p. 656-677
IMPROVEMENT OF METHODS FOR ANALYZING AND EVALUATING THE EFFECTIVENESS OF INVENTORY MANAGEMENT IN THE WAREHOUSE
The paper considers the problematics of material resources management - stock on the basis of analyzing the main systems (models) of stock condition control, tak-ing into account the optimal ratio between investment in stocks and the level of cus-tomer service. The object of the study is the systems of stock condition control. The purpose of this research lies in the analysis and general characterization of models and methods of inventory control. The groups of expenses associated with the crea-tion and maintenance of inventories are defined. Factors that affect the choice of in-ventory control system and parameters to be influenced in the implementation of in-ventory control are provided here. On the basis of mathematical methods the main indicators that improve the efficiency of inventory management are established. The methodology of calculation of these basic parameters of inventory management sys-tems on the basis of methods of linear algebra and mathematical analysis is given and a comparison of different typical systems (in particular, with a fixed order volume and with a fixed time interval between orders and others) is carried out. The results of this article can be used for the development and implementation of inventory management systems of material resources of any subjects of economic activity.
- 29 November 2024
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 10,p. 656-677
Open AccessIMPROVEMENT OF METHODS FOR ANALYZING AND EVALUATING THE EFFECTIVENESS OF INVENTORY MANAGEMENT IN THE WAREHOUSE
The paper considers the problematics of material resources management - stock on the basis of analyzing the main systems (models) of stock condition control, tak-ing into account the optimal ratio between investment in stocks and the level of cus-tomer service. The object of the study is the systems of stock condition control. The purpose of this research lies in the analysis and general characterization of models and methods of inventory control. The groups of expenses associated with the crea-tion and maintenance of inventories are defined. Factors that affect the choice of in-ventory control system and parameters to be influenced in the implementation of in-ventory control are provided here. On the basis of mathematical methods the main indicators that improve the efficiency of inventory management are established. The methodology of calculation of these basic parameters of inventory management sys-tems on the basis of methods of linear algebra and mathematical analysis is given and a comparison of different typical systems (in particular, with a fixed order volume and with a fixed time interval between orders and others) is carried out. The results of this article can be used for the development and implementation of inventory management systems of material resources of any subjects of economic activity.
- Open Access
- 29 November 2024
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 10,p. 389-406
USING FUZZY LOGIC TO CONTROL A VAV AIR CONDITIONING SYSTEM IN COMBINATION WITH A GREEN WALL
In today's world, people spend an average of 80%-90% of their time indoors; therefore, health risks can be greater from polluted indoor air than from polluted outdoor air. In many cities around the world, the ventilation and air conditioning system has become an important tool for achieving comfort inside most buildings. Some studies have shown that common houseplants can provide prevention of rising levels of indoor air pollution and purification of air inside buildings through biofiltration and phytoremediation (release of oxygen through photosynthesis) and this provides a natural way to help combat Sick Building Syndrome. In addition, plant evapotranspiration can be used to cool the air and control humidity around the plant environment. The use of vegetation as a tool to improve the overall indoor environment is an area that needs more research to prove the real impact of different green systems in the indoor environment. Typically, office spaces are significantly affected by fluctuations in indoor and outdoor conditions on the microclimate of the air environment. The comfort conditions of the air environment, which are formed by the temperature and humidity conditions, are characterized by a dynamic change in the intake of harmful substances throughout the day. For energy-efficient provision of indoor microclimate parameters, it is necessary to supply the amount of outdoor air as needed at a given time, i.e., to use a variable-flow ventilation and air conditioning system. A control algorithm for the VAV ventilation and air conditioning system was developed, taking into account the dynamics of changes in pollution (CO2), temperature and humidity in the room and the integrated living wall (phyto-conditioning, biofiltration). To build the optimal system, a plant analysis was conducted to take into account certain requirements, such as lighting conditions, climatic conditions, and growing medium.
- 29 November 2024
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 10,p. 389-406
Open AccessUSING FUZZY LOGIC TO CONTROL A VAV AIR CONDITIONING SYSTEM IN COMBINATION WITH A GREEN WALL
In today's world, people spend an average of 80%-90% of their time indoors; therefore, health risks can be greater from polluted indoor air than from polluted outdoor air. In many cities around the world, the ventilation and air conditioning system has become an important tool for achieving comfort inside most buildings. Some studies have shown that common houseplants can provide prevention of rising levels of indoor air pollution and purification of air inside buildings through biofiltration and phytoremediation (release of oxygen through photosynthesis) and this provides a natural way to help combat Sick Building Syndrome. In addition, plant evapotranspiration can be used to cool the air and control humidity around the plant environment. The use of vegetation as a tool to improve the overall indoor environment is an area that needs more research to prove the real impact of different green systems in the indoor environment. Typically, office spaces are significantly affected by fluctuations in indoor and outdoor conditions on the microclimate of the air environment. The comfort conditions of the air environment, which are formed by the temperature and humidity conditions, are characterized by a dynamic change in the intake of harmful substances throughout the day. For energy-efficient provision of indoor microclimate parameters, it is necessary to supply the amount of outdoor air as needed at a given time, i.e., to use a variable-flow ventilation and air conditioning system. A control algorithm for the VAV ventilation and air conditioning system was developed, taking into account the dynamics of changes in pollution (CO2), temperature and humidity in the room and the integrated living wall (phyto-conditioning, biofiltration). To build the optimal system, a plant analysis was conducted to take into account certain requirements, such as lighting conditions, climatic conditions, and growing medium.
- Open Access
- 17 April 2024
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 112,p. 316-326
Stress state analysis of a cylindrical tank with water of an under water sports palace
The paper analyzes the stress state of a cylindrical tank, which is one of the main structural elements of a sports facility - an underwater sports palace. In the calculation of the cylindrical shell of the tank of constant thickness, the moment theory was used. The reservoir is, in fact, a swimming pool for conducting training sessions on underwater swimming in fins, diving, diving, is considered fixed in its base and filled with liquid (water of a special composition, homogeneous in depth, with a given specific gravity). It is known that integration of the calculation equations of the moment theory (of circular cylindrical shells), namely: a) differential equations of equilibrium; b) equations of deformations; c) equations of forces attributed to the unit length of the coordinate line (tangential forces, bending moments), is a complex mathematical problem associated with solving a system of partial differential equations with variable coefficients. Only the calculation of the curve of a cylindrical shell ultimately leads to a system of differential equations with constant coefficients. Under the assumption of significant depth of the tank compared to the thickness of its walls and the value of the radius of the cylinder base (which allows us to consider it as infinitely long), displacements and forces (tangential and transverse), bending moments are analytically found. The locations of the cylinder surface points, in which the indicated forces and moments acquire maximum values, have been determined; sketches of their diagrams, determining the character of change of these physical quantities (parameters) along the height of the tank, have been given. The results obtained in the work can be further used to clarify and improve engineering methods of calculation of structural elements of sports facilities of this type, both at the stages of their design and in the modes of real operation in order to prevent situations associated with the loss of their strength and stability.
- 17 April 2024
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 112,p. 316-326
Open AccessStress state analysis of a cylindrical tank with water of an under water sports palace
The paper analyzes the stress state of a cylindrical tank, which is one of the main structural elements of a sports facility - an underwater sports palace. In the calculation of the cylindrical shell of the tank of constant thickness, the moment theory was used. The reservoir is, in fact, a swimming pool for conducting training sessions on underwater swimming in fins, diving, diving, is considered fixed in its base and filled with liquid (water of a special composition, homogeneous in depth, with a given specific gravity). It is known that integration of the calculation equations of the moment theory (of circular cylindrical shells), namely: a) differential equations of equilibrium; b) equations of deformations; c) equations of forces attributed to the unit length of the coordinate line (tangential forces, bending moments), is a complex mathematical problem associated with solving a system of partial differential equations with variable coefficients. Only the calculation of the curve of a cylindrical shell ultimately leads to a system of differential equations with constant coefficients. Under the assumption of significant depth of the tank compared to the thickness of its walls and the value of the radius of the cylinder base (which allows us to consider it as infinitely long), displacements and forces (tangential and transverse), bending moments are analytically found. The locations of the cylinder surface points, in which the indicated forces and moments acquire maximum values, have been determined; sketches of their diagrams, determining the character of change of these physical quantities (parameters) along the height of the tank, have been given. The results obtained in the work can be further used to clarify and improve engineering methods of calculation of structural elements of sports facilities of this type, both at the stages of their design and in the modes of real operation in order to prevent situations associated with the loss of their strength and stability.
- Open Access
- 29 March 2024
- Published by Kyiv National University of Construction and Architecture in Urban development and spatial planning
- No. 85,p. 224-235
THE ORGANIZATION OF WASTE MANAGEMENT AT THE FIRST TECHNOLOGICAL LEVEL
The waste management of resident’s area - an integral organizational and technological spatial oriented system, a component of the functional and planning structure of the city. The town-planning organization of waste management is aimed at improving the ecological condition and improving the comfort and quality of life of the inhabitants. The model of consistency of the approval of the project decision of design of the of primary collection points at the pre-design stages has been proposed in conditions of reconstruction or new building. The technological and planning constraints and the impact and morphological structure of the constructed waste in the places of their nascence which have locate in the zone of influence of the primary collection point in this model has been included. The method of calculation of waste management is divided into three technological levels according to the organizational model of waste management. The method of calculation of waste management have at each level of system the object of research ˗ it the territory which limited by the zone of influence of the urban environment elements as the subject of research: I level - research of primary collection points; II level - sorting or reloading stations; III level - enterprises for recycling or of household waste This article will consider the organization of sanitary cleaning at the first technological level. Санітарне очищення житлової території ˗ це цілісна організаційно- технологічна просторово орієнтована система, складова функціонально- планувальної структури міста, містобудівна організація якої спрямована на підвищення екологічного стану та покращення комфорту та якості життєдіяльності населення. Запропоновано послідовність (модель) ухвалення проектного рішення щодо організації системи збору та розташування первинних пунктів на предпроектних стадіях розроблення містобудівної документації в умовах реконструкції або нового будівництва з врахуванням об’єму та морфологічної структури побутових відходів в місцях їх утворення, що розміщенні в зоні впливу первинного пункту збору, технологічних та планувальних обмежень. Метод розрахунку системи санітарного очищення розподіляється на три технологічні рівні згідно з організаційною моделлю санітарного очищення та мають на кожному рівні системи об’єкт дослідження ˗ територію, обмежену зоною впливу містобудівного елемента предмета дослідження: I рівень - дослідження первинних пунктів збору; II рівень - станції сортування або перезавантаження; III рівень - підприємства з утилізації, переробки або захоронення побутових відходів.
- 29 March 2024
- Published by Kyiv National University of Construction and Architecture in Urban development and spatial planning
- No. 85,p. 224-235
Open AccessTHE ORGANIZATION OF WASTE MANAGEMENT AT THE FIRST TECHNOLOGICAL LEVEL
The waste management of resident’s area - an integral organizational and technological spatial oriented system, a component of the functional and planning structure of the city. The town-planning organization of waste management is aimed at improving the ecological condition and improving the comfort and quality of life of the inhabitants. The model of consistency of the approval of the project decision of design of the of primary collection points at the pre-design stages has been proposed in conditions of reconstruction or new building. The technological and planning constraints and the impact and morphological structure of the constructed waste in the places of their nascence which have locate in the zone of influence of the primary collection point in this model has been included. The method of calculation of waste management is divided into three technological levels according to the organizational model of waste management. The method of calculation of waste management have at each level of system the object of research ˗ it the territory which limited by the zone of influence of the urban environment elements as the subject of research: I level - research of primary collection points; II level - sorting or reloading stations; III level - enterprises for recycling or of household waste This article will consider the organization of sanitary cleaning at the first technological level. Санітарне очищення житлової території ˗ це цілісна організаційно- технологічна просторово орієнтована система, складова функціонально- планувальної структури міста, містобудівна організація якої спрямована на підвищення екологічного стану та покращення комфорту та якості життєдіяльності населення. Запропоновано послідовність (модель) ухвалення проектного рішення щодо організації системи збору та розташування первинних пунктів на предпроектних стадіях розроблення містобудівної документації в умовах реконструкції або нового будівництва з врахуванням об’єму та морфологічної структури побутових відходів в місцях їх утворення, що розміщенні в зоні впливу первинного пункту збору, технологічних та планувальних обмежень. Метод розрахунку системи санітарного очищення розподіляється на три технологічні рівні згідно з організаційною моделлю санітарного очищення та мають на кожному рівні системи об’єкт дослідження ˗ територію, обмежену зоною впливу містобудівного елемента предмета дослідження: I рівень - дослідження первинних пунктів збору; II рівень - станції сортування або перезавантаження; III рівень - підприємства з утилізації, переробки або захоронення побутових відходів.