Nataliia Shudra
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Nataliia Shudra has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Valeriy Gladilin
Department of Geodesy, Cartography and Land Management, Bila Tserkva National Agrarian University, Soborna pl. 8/1, 09117 Bila Tserkva, Kyivska oblast, Ukraine
9 shared publications - Petro Cherednichenko
Київський національний університет будівництва і архітектури
8 shared publications - Petro Chulanov
Київський національний університет будівництва та архітектури
7 shared publications - Tatiana Siroshtan7 shared publications
- Yurii Chovnyuk
Kyiv National University of Construction and Architecture
7 shared publications - Oleksii Pryimachenko
Київський національний університет будівництва і архітектури
6 shared publications
Latest Publications
- Open Access
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 116
Use of the Green's function method in the hyperbolic heat conduction theory and non-Fourier analysis of non-stationary thermoelastic fields (moving) deformed media/bodies and composite materials
The work develops precisely solvable models of pulse optics for dispersive, dissipative deformed media (bodies) and composite materials during their laser processing with short wave pulses. Unsteady thermoelastic fields excited by video pulses in these media (bodies) and materials are presented analytically thanks to exact periodic and unsteady solutions of thermoelasticity equations obtained directly in the time domain outside the limits of Fourier series by analogy with the well-known results of A.B. Schwarzburg. This study also obtained a hyperbolic heat conduction equation for a moving body and a solution to this equation in a cylindrical coordinate system using Green's functions. The solution obtained in this work corresponds to the hyperbolic theory of heat conduction, which takes into account the finiteness of the heat propagation velocity and allows for a more accurate assignment of strength standards for parts operating under thermodynamic stresses, and in technological processes, for example, in the problem of temperature field distribution in cylindrical samples during their processing with a grinding tool, to optimize the processing mode parameters.
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 116
Open AccessUse of the Green's function method in the hyperbolic heat conduction theory and non-Fourier analysis of non-stationary thermoelastic fields (moving) deformed media/bodies and composite materials
The work develops precisely solvable models of pulse optics for dispersive, dissipative deformed media (bodies) and composite materials during their laser processing with short wave pulses. Unsteady thermoelastic fields excited by video pulses in these media (bodies) and materials are presented analytically thanks to exact periodic and unsteady solutions of thermoelasticity equations obtained directly in the time domain outside the limits of Fourier series by analogy with the well-known results of A.B. Schwarzburg. This study also obtained a hyperbolic heat conduction equation for a moving body and a solution to this equation in a cylindrical coordinate system using Green's functions. The solution obtained in this work corresponds to the hyperbolic theory of heat conduction, which takes into account the finiteness of the heat propagation velocity and allows for a more accurate assignment of strength standards for parts operating under thermodynamic stresses, and in technological processes, for example, in the problem of temperature field distribution in cylindrical samples during their processing with a grinding tool, to optimize the processing mode parameters.
- Open Access
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 116
Fundamental analysis of the dynamics of discrete-continuous rotary systems of tracked machines with mechatronic control systems
When constructing a model of tracked machines, it is not possible to limit oneself to discrete parameters – masses and rigidities – if the shafts of the rotary system have significant masses and lengths. In long shaft lines, wave processes may occur under the action of external disturbances applied to the discrete masses of the system. The complexity of analyzing wave processes in discrete-continuous systems that arise in them when operating modes change forces us to look for simpler solution methods that still give satisfactory results in terms of accuracy. One such method is to replace the discrete-continuous model with a discrete one, which differs slightly in its dynamic properties from the original. In this case, the finite element method is used, into which each section of the shaft with discrete masses concentrated on it can be divided, and the shaft itself is a distributed mass. In this regard, there is a need to formulate a criterion that allows establishing an equivalent system of discrete masses that replace the discrete-continuous system. A similar task is the analysis of dynamic processes occurring in hydromechanical systems, which include long pipelines and large masses of hydraulic mechanism links. The paper presents equations of motion for a tracked vehicle shaft with distributed mass, analyzes a weighted shaft with masses at its ends, and determines the natural frequencies of a multi-mass rotary system of a tracked vehicle, taking into account the shaft mass. The Prager method was used to find the natural numbers of the system. The results of calculating the amplitudes of shaft vibrations can be used to find the maximum values of the moments of elastic forces of the shaft sections. The change in the moment of elastic forces has a beating character. Each of the natural frequencies of a system with several degrees of freedom corresponds to a certain form of vibration, therefore, at close values of natural frequencies, there is a continuous transition from one form of vibration to another and, accordingly, a periodic exchange of energy between individual sections of the system while maintaining their energy constant. Control over the movement of the system in transient processes (start-up) can be carried out by mechatronic control systems.
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 116
Open AccessFundamental analysis of the dynamics of discrete-continuous rotary systems of tracked machines with mechatronic control systems
When constructing a model of tracked machines, it is not possible to limit oneself to discrete parameters – masses and rigidities – if the shafts of the rotary system have significant masses and lengths. In long shaft lines, wave processes may occur under the action of external disturbances applied to the discrete masses of the system. The complexity of analyzing wave processes in discrete-continuous systems that arise in them when operating modes change forces us to look for simpler solution methods that still give satisfactory results in terms of accuracy. One such method is to replace the discrete-continuous model with a discrete one, which differs slightly in its dynamic properties from the original. In this case, the finite element method is used, into which each section of the shaft with discrete masses concentrated on it can be divided, and the shaft itself is a distributed mass. In this regard, there is a need to formulate a criterion that allows establishing an equivalent system of discrete masses that replace the discrete-continuous system. A similar task is the analysis of dynamic processes occurring in hydromechanical systems, which include long pipelines and large masses of hydraulic mechanism links. The paper presents equations of motion for a tracked vehicle shaft with distributed mass, analyzes a weighted shaft with masses at its ends, and determines the natural frequencies of a multi-mass rotary system of a tracked vehicle, taking into account the shaft mass. The Prager method was used to find the natural numbers of the system. The results of calculating the amplitudes of shaft vibrations can be used to find the maximum values of the moments of elastic forces of the shaft sections. The change in the moment of elastic forces has a beating character. Each of the natural frequencies of a system with several degrees of freedom corresponds to a certain form of vibration, therefore, at close values of natural frequencies, there is a continuous transition from one form of vibration to another and, accordingly, a periodic exchange of energy between individual sections of the system while maintaining their energy constant. Control over the movement of the system in transient processes (start-up) can be carried out by mechatronic control systems.
- Open Access
- 17 December 2024
- Published by Kyiv National University of Construction and Architecture in Construction Engineering
- No. 40,p. 71-78
OPTIMIZATION OF THE PROCESSES OF MOVEMENT AND ACCELERATION OF THE OVERHEAD CRANE TROLLEY IN THE MODE OF DAMPING UNCONTROLLED LOAD OSCILLATIONS
The paper deals with the modeling and optimization of the processes of movement and acceleration of a bridge crane trolley in the mode of damping uncontrolled oscillations of the load. For the dynamic system of a flat pendulum with vibration damping, which describes the oscillations of a bridge crane load on a flexible rope suspension in a separate vertical plane, it is proposed to use third-order time splines that model the motion and acceleration of the load suspension point in the horizontal direction of the trolley's movement. To determine the time dependence of the angle of deviation of the crane from the gravitational ver-tical, it is proposed to use the methods of classical calculus of variations (Euler-Poisson equation), which allow optimizing (minimizing) the value of this angle in the process of accelerating a trolley with a load sus-pended from the ropes of an overhead crane. An analytical solution to the problem of damping residual uncontrollable oscillations of the overhead crane load, which usually occur after full acceleration or braking of the load suspension point on the trolley, is obtained. To derive the dependencies, an analytical approach was used to calculate the value of the angle of deviation of the overhead crane's cargo rope from the gravitational vertical, depending on the acceleration and displacement of the load suspension point. The problem of loosening of a load moved by an overhead crane is considered and solved in a new way that allows to completely avoiding pendulum spatial oscillations of the load on a rope suspension. The mathematical apparatus of linear algebra (Kramer's rule, in particular) is used, which allows us to establish analytically the law of time motion of a rope with a load, the angle of deviation of which from the vertical takes minimum values in the process of acceleration of the cargo trolley.
- 17 December 2024
- Published by Kyiv National University of Construction and Architecture in Construction Engineering
- No. 40,p. 71-78
Open AccessOPTIMIZATION OF THE PROCESSES OF MOVEMENT AND ACCELERATION OF THE OVERHEAD CRANE TROLLEY IN THE MODE OF DAMPING UNCONTROLLED LOAD OSCILLATIONS
The paper deals with the modeling and optimization of the processes of movement and acceleration of a bridge crane trolley in the mode of damping uncontrolled oscillations of the load. For the dynamic system of a flat pendulum with vibration damping, which describes the oscillations of a bridge crane load on a flexible rope suspension in a separate vertical plane, it is proposed to use third-order time splines that model the motion and acceleration of the load suspension point in the horizontal direction of the trolley's movement. To determine the time dependence of the angle of deviation of the crane from the gravitational ver-tical, it is proposed to use the methods of classical calculus of variations (Euler-Poisson equation), which allow optimizing (minimizing) the value of this angle in the process of accelerating a trolley with a load sus-pended from the ropes of an overhead crane. An analytical solution to the problem of damping residual uncontrollable oscillations of the overhead crane load, which usually occur after full acceleration or braking of the load suspension point on the trolley, is obtained. To derive the dependencies, an analytical approach was used to calculate the value of the angle of deviation of the overhead crane's cargo rope from the gravitational vertical, depending on the acceleration and displacement of the load suspension point. The problem of loosening of a load moved by an overhead crane is considered and solved in a new way that allows to completely avoiding pendulum spatial oscillations of the load on a rope suspension. The mathematical apparatus of linear algebra (Kramer's rule, in particular) is used, which allows us to establish analytically the law of time motion of a rope with a load, the angle of deviation of which from the vertical takes minimum values in the process of acceleration of the cargo trolley.
- Open Access
- 29 November 2024
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 113,p. 227-240
Hyperbolic models in the analysis of heat and moisture exchange in inhomogeneous porous materials
The paper uses hyperbolic models for the analysis of heat and moisture exchange in inhomogeneous porous materials in which short heat pulses propagate. The heat transfer in sharply inhomogeneous media at room temperature is not described by Fourier and Cattaneo laws, but is modeled by Guyer-Krumhansl-type equations. The O.V. Lykov system of equations of interrelated heat and mass transfer taking into account the finiteness of heat and mass (moisture) transfer rates is solved using a one-dimensional formulation. However, the heat propagation velocity is of the order of the sound speed, so due to the short relaxation time, the solutions of the hyperbolic equation of thermal conductivity largely coincide with the solutions of the classical parabolic equation, although there are some significant differences. They depend on processes occurring on the surface (in thin layers) of porous bodies. The moisture diffusion rate in capillary-porous materials is approximately 106…107 and more times lower than the heat propagation rate, so, accordingly, the relaxation time of diffusion processes is much longer and should be considered in mass transfer equations. Exact analytical solutions of the one-dimensional Guyer-Krumhansl equation are obtained using the operator method. This equation is also used to study heat pulses of different shapes in the medium with respect to phonon/ballistic methods of heat transfer. The obtained results are used to model the heat and moisture propagation in thin films of capillary-porous bodies with account taken of molecular effects in systems of reduced dimension. The very short heat pulses propagation simulating isolated heat waves is modeled with reference to Knudsen number, as well as the solutions for the periodic initial function. The exact solutions of the above problems in the model of thin films of capillary-porous bodies are obtained.
- 29 November 2024
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 113,p. 227-240
Open AccessHyperbolic models in the analysis of heat and moisture exchange in inhomogeneous porous materials
The paper uses hyperbolic models for the analysis of heat and moisture exchange in inhomogeneous porous materials in which short heat pulses propagate. The heat transfer in sharply inhomogeneous media at room temperature is not described by Fourier and Cattaneo laws, but is modeled by Guyer-Krumhansl-type equations. The O.V. Lykov system of equations of interrelated heat and mass transfer taking into account the finiteness of heat and mass (moisture) transfer rates is solved using a one-dimensional formulation. However, the heat propagation velocity is of the order of the sound speed, so due to the short relaxation time, the solutions of the hyperbolic equation of thermal conductivity largely coincide with the solutions of the classical parabolic equation, although there are some significant differences. They depend on processes occurring on the surface (in thin layers) of porous bodies. The moisture diffusion rate in capillary-porous materials is approximately 106…107 and more times lower than the heat propagation rate, so, accordingly, the relaxation time of diffusion processes is much longer and should be considered in mass transfer equations. Exact analytical solutions of the one-dimensional Guyer-Krumhansl equation are obtained using the operator method. This equation is also used to study heat pulses of different shapes in the medium with respect to phonon/ballistic methods of heat transfer. The obtained results are used to model the heat and moisture propagation in thin films of capillary-porous bodies with account taken of molecular effects in systems of reduced dimension. The very short heat pulses propagation simulating isolated heat waves is modeled with reference to Knudsen number, as well as the solutions for the periodic initial function. The exact solutions of the above problems in the model of thin films of capillary-porous bodies are obtained.
- Open Access
- 17 April 2024
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 112,p. 316-326
Stress state analysis of a cylindrical tank with water of an under water sports palace
The paper analyzes the stress state of a cylindrical tank, which is one of the main structural elements of a sports facility - an underwater sports palace. In the calculation of the cylindrical shell of the tank of constant thickness, the moment theory was used. The reservoir is, in fact, a swimming pool for conducting training sessions on underwater swimming in fins, diving, diving, is considered fixed in its base and filled with liquid (water of a special composition, homogeneous in depth, with a given specific gravity). It is known that integration of the calculation equations of the moment theory (of circular cylindrical shells), namely: a) differential equations of equilibrium; b) equations of deformations; c) equations of forces attributed to the unit length of the coordinate line (tangential forces, bending moments), is a complex mathematical problem associated with solving a system of partial differential equations with variable coefficients. Only the calculation of the curve of a cylindrical shell ultimately leads to a system of differential equations with constant coefficients. Under the assumption of significant depth of the tank compared to the thickness of its walls and the value of the radius of the cylinder base (which allows us to consider it as infinitely long), displacements and forces (tangential and transverse), bending moments are analytically found. The locations of the cylinder surface points, in which the indicated forces and moments acquire maximum values, have been determined; sketches of their diagrams, determining the character of change of these physical quantities (parameters) along the height of the tank, have been given. The results obtained in the work can be further used to clarify and improve engineering methods of calculation of structural elements of sports facilities of this type, both at the stages of their design and in the modes of real operation in order to prevent situations associated with the loss of their strength and stability.
- 17 April 2024
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 112,p. 316-326
Open AccessStress state analysis of a cylindrical tank with water of an under water sports palace
The paper analyzes the stress state of a cylindrical tank, which is one of the main structural elements of a sports facility - an underwater sports palace. In the calculation of the cylindrical shell of the tank of constant thickness, the moment theory was used. The reservoir is, in fact, a swimming pool for conducting training sessions on underwater swimming in fins, diving, diving, is considered fixed in its base and filled with liquid (water of a special composition, homogeneous in depth, with a given specific gravity). It is known that integration of the calculation equations of the moment theory (of circular cylindrical shells), namely: a) differential equations of equilibrium; b) equations of deformations; c) equations of forces attributed to the unit length of the coordinate line (tangential forces, bending moments), is a complex mathematical problem associated with solving a system of partial differential equations with variable coefficients. Only the calculation of the curve of a cylindrical shell ultimately leads to a system of differential equations with constant coefficients. Under the assumption of significant depth of the tank compared to the thickness of its walls and the value of the radius of the cylinder base (which allows us to consider it as infinitely long), displacements and forces (tangential and transverse), bending moments are analytically found. The locations of the cylinder surface points, in which the indicated forces and moments acquire maximum values, have been determined; sketches of their diagrams, determining the character of change of these physical quantities (parameters) along the height of the tank, have been given. The results obtained in the work can be further used to clarify and improve engineering methods of calculation of structural elements of sports facilities of this type, both at the stages of their design and in the modes of real operation in order to prevent situations associated with the loss of their strength and stability.
- Open Access
- 23 February 2024
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 7,p. 365-381
ALGEBRAIC ADJUSTMENT OF MEASURED TRIANGLE ELEMENTS
It is difficult to align the measured elements of the triangle. A method of alignment using algebraic circles is proposed. If six elements are measured in a triangle: angles A, B, C, lengths of opposite sides a, b, c with mean square errors mA, mB, mC, ma, mb, mc, the values of the equalized elements must satisfy the requirements of the equations where D is the metric parameter of the triangle (the metric value through which the mathematical relationship between the sides and angles of the triangle is established), that is, the value of the diameter of the circle. If , which are found by formulas (1) and condition (2) is fulfilled, then this confirms the validity of the theorem of sines. In fact, it is a symmetrical set, because the number and composition of the upper indices corresponds to the number and composition of the lower indices, and this is a reflection of dimensions, since the triangle ABC has pairs of opposite elements: а- А; b- B; c- C. Let's construct the graph G Do of the diameter of the circle circumscribed around the aligned triangle, for which we will first construct the graphs G Di of the diameters of the circles circumscribed around the T-triangles, which are shown in fig. 1, and then combine them. Three vertices a, b, c form a "plane" - this is a metric field. The reflection of the metric field is the field of angular measurements - a "plane" defined by three points A, B, C. Note that for a measured triangle, the reflection of the metric field in the angular one is not unambiguous, so the first plane in fig. 1 is "inclined" to the second. After determining the most likely metric parameter Do of the triangle, it is possible to bring these planes into full correspondence. That is, Do is a "lens" [4],[8] with the help of which we obtain an unambiguous mapping of the metric field in the angular field and vice versa.
- 23 February 2024
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 7,p. 365-381
Open AccessALGEBRAIC ADJUSTMENT OF MEASURED TRIANGLE ELEMENTS
It is difficult to align the measured elements of the triangle. A method of alignment using algebraic circles is proposed. If six elements are measured in a triangle: angles A, B, C, lengths of opposite sides a, b, c with mean square errors mA, mB, mC, ma, mb, mc, the values of the equalized elements must satisfy the requirements of the equations where D is the metric parameter of the triangle (the metric value through which the mathematical relationship between the sides and angles of the triangle is established), that is, the value of the diameter of the circle. If , which are found by formulas (1) and condition (2) is fulfilled, then this confirms the validity of the theorem of sines. In fact, it is a symmetrical set, because the number and composition of the upper indices corresponds to the number and composition of the lower indices, and this is a reflection of dimensions, since the triangle ABC has pairs of opposite elements: а- А; b- B; c- C. Let's construct the graph G Do of the diameter of the circle circumscribed around the aligned triangle, for which we will first construct the graphs G Di of the diameters of the circles circumscribed around the T-triangles, which are shown in fig. 1, and then combine them. Three vertices a, b, c form a "plane" - this is a metric field. The reflection of the metric field is the field of angular measurements - a "plane" defined by three points A, B, C. Note that for a measured triangle, the reflection of the metric field in the angular one is not unambiguous, so the first plane in fig. 1 is "inclined" to the second. After determining the most likely metric parameter Do of the triangle, it is possible to bring these planes into full correspondence. That is, Do is a "lens" [4],[8] with the help of which we obtain an unambiguous mapping of the metric field in the angular field and vice versa.
- Open Access
- 26 December 2023
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 6,p. 276-292
THE PROBLEM OF RELIABILITY OF GEODESIC NETWORKS
В наш час теорія надійності широко використовується в будівельному виробництві, а також використовується і в області геодезії. Шляхом абстрагування її положення можна з успіхом перенести і на системи, які, здавалося б, не знаходяться в динамічному стані. Візьмемо, наприклад, пункти полігонометричної (нівелірної) мережі в місті. Здавалося б, що така мережа знаходиться в статичному стані, однак з плином часу вона зазнає змін, тобто вона знаходиться в непомітній динаміці і надійність її поступово знижується. Під надійністю в широкому сенсі цього слова розуміють здатність технічного пристрою (системи, мережі) до безперебійної (безвідмовної) роботи упродовж заданого проміжку часу у певних умовах. Такий проміжок часу зазвичай зумовлено часом виконання деякої задачі, яка здійснюється приладом чи системою і є частиною загальної операційної задачі в вирішенні топографо-геодезичних робіт. В даний час проблема надійності стає однією з вузлових проблем техніки та організації управління. Забезпечення надійної роботи всіх елементів системи – є першорядною важливістю.
- 26 December 2023
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 6,p. 276-292
Open AccessTHE PROBLEM OF RELIABILITY OF GEODESIC NETWORKS
В наш час теорія надійності широко використовується в будівельному виробництві, а також використовується і в області геодезії. Шляхом абстрагування її положення можна з успіхом перенести і на системи, які, здавалося б, не знаходяться в динамічному стані. Візьмемо, наприклад, пункти полігонометричної (нівелірної) мережі в місті. Здавалося б, що така мережа знаходиться в статичному стані, однак з плином часу вона зазнає змін, тобто вона знаходиться в непомітній динаміці і надійність її поступово знижується. Під надійністю в широкому сенсі цього слова розуміють здатність технічного пристрою (системи, мережі) до безперебійної (безвідмовної) роботи упродовж заданого проміжку часу у певних умовах. Такий проміжок часу зазвичай зумовлено часом виконання деякої задачі, яка здійснюється приладом чи системою і є частиною загальної операційної задачі в вирішенні топографо-геодезичних робіт. В даний час проблема надійності стає однією з вузлових проблем техніки та організації управління. Забезпечення надійної роботи всіх елементів системи – є першорядною важливістю.
- Open Access
- 24 November 2023
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 5,p. 286-305
PROPERTIES OF TRUE ERRORS OF GEODESIC MEASUREMENTS IN THE ALGEBRAIC CIRCLE
Істинні похибки можливо знайти коли ми знаємо істинне значення вимірюваної величини. В геодезичних вимірах та і в будь – яких інших вимірюваннях істинне значення вимірюваної величини невідоме, тому приймається якесь найбільш ймовірне значення цієї величини, сума ймовірних похибок повинна дорівнювати нулю, сума істинних похибок повинна дорівнювати нулю, тому необхідно дослідити ймовірні та істинні похибки в алгебраїчному колі. Розглядається новий метод оцінки точності вимірів він відрізняється від традиційних тим, що в результаті обробки вимірів однієї величини одержують не тільки загальну середню квадратичну похибку, а й середні квадратичні похибки всіх вимірів.
- 24 November 2023
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 5,p. 286-305
Open AccessPROPERTIES OF TRUE ERRORS OF GEODESIC MEASUREMENTS IN THE ALGEBRAIC CIRCLE
Істинні похибки можливо знайти коли ми знаємо істинне значення вимірюваної величини. В геодезичних вимірах та і в будь – яких інших вимірюваннях істинне значення вимірюваної величини невідоме, тому приймається якесь найбільш ймовірне значення цієї величини, сума ймовірних похибок повинна дорівнювати нулю, сума істинних похибок повинна дорівнювати нулю, тому необхідно дослідити ймовірні та істинні похибки в алгебраїчному колі. Розглядається новий метод оцінки точності вимірів він відрізняється від традиційних тим, що в результаті обробки вимірів однієї величини одержують не тільки загальну середню квадратичну похибку, а й середні квадратичні похибки всіх вимірів.
- Open Access
- 25 September 2023
- Published by Kyiv National University of Construction and Architecture in Urban development and spatial planning
- No. 84,p. 392-406
ANALYTICAL SUBSTANTIATION OF DETERMINATION OF INTEGRAL CHARACTERISTICS OF ROTOR SYSTEMS OF URBAN CRANES
Присвячено актуальній проблемі аналітичного обґрунтування визначення інтегральних характеристик роторних систем містобудівельних кранів, знання котрих необхідне для проведення подальшого балансування їх роторів на вибігу (чи у процесі пуску). Це дозволяє відмовитись від використання контактних вібраційних давачів та іншої спеціальної апаратури задля моніторингу процесу балансування. Крім того, виникає можливість оптимізації рушійного моменту (у процесі пуску) та гальмівного моменту при вибігу роторної системи. Мета роботи полягає у розробці алгоритму визначення інтегральних характеристик роторної системи при пуску/вибігу за спеціального співвідношення коефіцієнтів моментів – складових сумарного моменту опору обертанню. Використані підходи та моделі математичної фізики та класичного варіаційного числення. Отримані у роботі результати стануть у нагоді для уточнення й вдосконалення інженерних методів розрахунку роторних систем будівельних/містобудівельних кранів, працюючих у перехідних режимах (пуск, вибіг, реверс тощо), як на стадіях їх проектування, так і в режимах реальної експлуатації.
- 25 September 2023
- Published by Kyiv National University of Construction and Architecture in Urban development and spatial planning
- No. 84,p. 392-406
Open AccessANALYTICAL SUBSTANTIATION OF DETERMINATION OF INTEGRAL CHARACTERISTICS OF ROTOR SYSTEMS OF URBAN CRANES
Присвячено актуальній проблемі аналітичного обґрунтування визначення інтегральних характеристик роторних систем містобудівельних кранів, знання котрих необхідне для проведення подальшого балансування їх роторів на вибігу (чи у процесі пуску). Це дозволяє відмовитись від використання контактних вібраційних давачів та іншої спеціальної апаратури задля моніторингу процесу балансування. Крім того, виникає можливість оптимізації рушійного моменту (у процесі пуску) та гальмівного моменту при вибігу роторної системи. Мета роботи полягає у розробці алгоритму визначення інтегральних характеристик роторної системи при пуску/вибігу за спеціального співвідношення коефіцієнтів моментів – складових сумарного моменту опору обертанню. Використані підходи та моделі математичної фізики та класичного варіаційного числення. Отримані у роботі результати стануть у нагоді для уточнення й вдосконалення інженерних методів розрахунку роторних систем будівельних/містобудівельних кранів, працюючих у перехідних режимах (пуск, вибіг, реверс тощо), як на стадіях їх проектування, так і в режимах реальної експлуатації.
- Open Access
- 25 September 2023
- Published by Kyiv National University of Construction and Architecture in Urban development and spatial planning
- No. 84,p. 206-218
THE PREREQUISITES FOR CREATING A GEOSPATIAL DATASET OF THE STATE CADASTRE OF NATURAL TERRITORIES OF RESORTS
Проаналізовано основні проблемні питання сучасного стану геопросторових даних Державного кадастру природних територій курортів, визначено вимоги до даних та метаданих цього кадастру з урахуванням чинного законодавства у сфері національної інфраструктури геопросторових даних (далі – НІГД). Авторами сформовано та запропоновано рішення щодо створення набору геопросторових даних Державного кадастру природних територій курортів, а також методику формування цього набору в частині меж територій курортів державного значення, їх округів, зон санітарної (гірничо-санітарної) охорони, враховуючи чинну містобудівну і землевпорядну документації за наявності. Результати дослідження дозволять забезпечити вихідними даними розробників планувальної документації та забезпечити дотримання землекористувачами обмежень у використанні природних ресурсів у межах округів курортів. Також було встановлено потребу у геопросторових даних про артезіанські свердловини, які розташовані на території курортів, з метою відновлення меж першої зони санітарної (гірничо-санітарної) охорони. Опрацювання вихідних даних дослідження було здійснено у геоінформаційному середовищі QGIS, а також у програмному середовищі Digitals.
- 25 September 2023
- Published by Kyiv National University of Construction and Architecture in Urban development and spatial planning
- No. 84,p. 206-218
Open AccessTHE PREREQUISITES FOR CREATING A GEOSPATIAL DATASET OF THE STATE CADASTRE OF NATURAL TERRITORIES OF RESORTS
Проаналізовано основні проблемні питання сучасного стану геопросторових даних Державного кадастру природних територій курортів, визначено вимоги до даних та метаданих цього кадастру з урахуванням чинного законодавства у сфері національної інфраструктури геопросторових даних (далі – НІГД). Авторами сформовано та запропоновано рішення щодо створення набору геопросторових даних Державного кадастру природних територій курортів, а також методику формування цього набору в частині меж територій курортів державного значення, їх округів, зон санітарної (гірничо-санітарної) охорони, враховуючи чинну містобудівну і землевпорядну документації за наявності. Результати дослідження дозволять забезпечити вихідними даними розробників планувальної документації та забезпечити дотримання землекористувачами обмежень у використанні природних ресурсів у межах округів курортів. Також було встановлено потребу у геопросторових даних про артезіанські свердловини, які розташовані на території курортів, з метою відновлення меж першої зони санітарної (гірничо-санітарної) охорони. Опрацювання вихідних даних дослідження було здійснено у геоінформаційному середовищі QGIS, а також у програмному середовищі Digitals.