Myeongjin Kim
Research Subjects
Research Interests
Myeongjin Kim has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Dongwon Yun
Daegu Gyeongbuk Institute of Science and Technology (DGIST)
7 shared publications - Bongsub Song
The Department of Robotics and Mechatronics Engineering, Daegu Gyeongbuk Institute of Science and Technology (DGIST), Daegu, Korea
3 shared publications Donghyun Kim
Department of Robotics Engineering Daegu Gyeongbuk Institute of Science and Technology (DGIST) 333 Techno Jungang‐daero, Hyeonpung, Dalseong‐gun Daegu 42988 Republic of Korea
2 shared publicationsJaewon Ahn
Department of Robotics Engineering Daegu Gyeongbuk Institute of Science and Technology (DGIST) 333 Techno Jungang‐daero, Hyeonpung, Dalseong‐gun Daegu 42988 Republic of Korea
2 shared publications- Jooheon Kim
Chung-Ang University
2 shared publications Junseong Bae
Department of Robotics Engineering Daegu Gyeongbuk Institute of Science and Technology (DGIST) 333 Techno Jungang‐daero, Hyeonpung, Dalseong‐gun Daegu 42988 Republic of Korea
2 shared publications
Latest Publications
- 23 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (1) , 739-750
Compact Posture Control System for Jumping Robot Using an Air Reaction Wheel
In this article, we propose a novel balance control method called air reaction wheel (ARW) for a small-scale legged jumping robot, which can generate high torque while being compact and lightweight. The ARW generates torque in the same direction through the combination of the torque induced by pushing the air, and the moment of inertia of ARW with the angular acceleration of the motor, resulting in high torque performance while being lighter and more compact than conventional balance control mechanisms. To validate the torque performance of the ARW, we conduct dynamic analysis and computational fluid dynamics simulations of the ARW and utilize a central composite face model to find the optimal shape for generating high torque. Furthermore, we verify that the proposed method generates high torque while being compact and lightweight compared to the conventional methods through theoretical analysis and comparative experiments on the ARW and existing mechanisms regarding torque performance. Finally, we conducted jump and landing experiments by attaching the optimized ARW model to a jumping robot, and through experimental results, we verified that the proposed mechanism contributes to stable jumping and landing.
- 23 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (1) , 739-750
Compact Posture Control System for Jumping Robot Using an Air Reaction Wheel
In this article, we propose a novel balance control method called air reaction wheel (ARW) for a small-scale legged jumping robot, which can generate high torque while being compact and lightweight. The ARW generates torque in the same direction through the combination of the torque induced by pushing the air, and the moment of inertia of ARW with the angular acceleration of the motor, resulting in high torque performance while being lighter and more compact than conventional balance control mechanisms. To validate the torque performance of the ARW, we conduct dynamic analysis and computational fluid dynamics simulations of the ARW and utilize a central composite face model to find the optimal shape for generating high torque. Furthermore, we verify that the proposed method generates high torque while being compact and lightweight compared to the conventional methods through theoretical analysis and comparative experiments on the ARW and existing mechanisms regarding torque performance. Finally, we conducted jump and landing experiments by attaching the optimized ARW model to a jumping robot, and through experimental results, we verified that the proposed mechanism contributes to stable jumping and landing.
- 27 August 2022
- Published by Springer Nature in International Journal of Control, Automation, and Systems
- Vol. 20 (10) , 3393-3409
Review of the Latest Research on Snake Robots Focusing on the Structure, Motion and Control Method
- 27 August 2022
- Published by Springer Nature in International Journal of Control, Automation, and Systems
- Vol. 20 (10) , 3393-3409
Review of the Latest Research on Snake Robots Focusing on the Structure, Motion and Control Method
- Open Access
- 8 April 2022
- Published by MDPI AG in Electronics
- Vol. 11 (8) , 1191
Study on the Compact Balance Control Mechanism for Guinea Fowl Jumping Robot
We developed a guinea fowl jumping robot with a one-axis momentum wheel mechanism with a passive hallux model. The Guinea fowl jumping robot was able to perform stable vertical jumping due to the linkage structure designed as a passive hallux model. Furthermore, we used the one-axis momentum wheel mechanism in the jumping robot for making the compact balance control mechanism that can control the body angle of the robot. Through the experiment, the conventional jumping robot uses the inertial tail to adjust the body angle in the air for stable landing and jumping. However, in the case of an inertial tail, it has a large volume and has a disadvantage in that stability is highly reduced when it collides with obstacles due to the shape of the inertial tail. Moreover, we performed a theoretical analysis, simulation, and experiment to verify the performance of the momentum wheel mechanism, and we confirmed that the passive hallux structure contributed to the jumping stability. Besides, we proved that the momentum wheel could adequately land on the ground by adjusting the body angle after vertical jumping. In addition, we demonstrated that the stability of the momentum wheel is higher than the inertial tail through collision simulation.
- 8 April 2022
- Published by MDPI AG in Electronics
- Vol. 11 (8) , 1191
Open AccessStudy on the Compact Balance Control Mechanism for Guinea Fowl Jumping Robot
We developed a guinea fowl jumping robot with a one-axis momentum wheel mechanism with a passive hallux model. The Guinea fowl jumping robot was able to perform stable vertical jumping due to the linkage structure designed as a passive hallux model. Furthermore, we used the one-axis momentum wheel mechanism in the jumping robot for making the compact balance control mechanism that can control the body angle of the robot. Through the experiment, the conventional jumping robot uses the inertial tail to adjust the body angle in the air for stable landing and jumping. However, in the case of an inertial tail, it has a large volume and has a disadvantage in that stability is highly reduced when it collides with obstacles due to the shape of the inertial tail. Moreover, we performed a theoretical analysis, simulation, and experiment to verify the performance of the momentum wheel mechanism, and we confirmed that the passive hallux structure contributed to the jumping stability. Besides, we proved that the momentum wheel could adequately land on the ground by adjusting the body angle after vertical jumping. In addition, we demonstrated that the stability of the momentum wheel is higher than the inertial tail through collision simulation.
- Open Access
- 24 October 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (21) , 7478
Snake Robot with Driving Assistant Mechanism
Snake robots are composed of multiple links and joints and have a high degree of freedom. They can perform various motions and can overcome various terrains. Snake robots need additional driving algorithms and sensors that acquire terrain data in order to overcome rough terrains such as grasslands and slopes. In this study, we propose a driving assistant mechanism (DAM), which assists locomotion without additional driving algorithms and sensors. In this paper, we confirmed that the DAM prevents a roll down on a slope and increases the locomotion speed through dynamic simulation and experiments. It was possible to overcome grasslands and a 27 degrees slope without using additional driving controllers. In conclusion, we expect that a snake robot can conduct a wide range of missions well, such as exploring disaster sites and rough terrain, by using the proposed mechanism.
- 24 October 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (21) , 7478
Open AccessSnake Robot with Driving Assistant Mechanism
Snake robots are composed of multiple links and joints and have a high degree of freedom. They can perform various motions and can overcome various terrains. Snake robots need additional driving algorithms and sensors that acquire terrain data in order to overcome rough terrains such as grasslands and slopes. In this study, we propose a driving assistant mechanism (DAM), which assists locomotion without additional driving algorithms and sensors. In this paper, we confirmed that the DAM prevents a roll down on a slope and increases the locomotion speed through dynamic simulation and experiments. It was possible to overcome grasslands and a 27 degrees slope without using additional driving controllers. In conclusion, we expect that a snake robot can conduct a wide range of missions well, such as exploring disaster sites and rough terrain, by using the proposed mechanism.
- 6 September 2020
- Published by Wiley in Advanced Materials Technologies
- Vol. 5 (11)
Hot Embossing Process Technology Forming Arbitrary Patterns in Real Time
With the development of mobile sensors and biosensors, an ultrafine process technology that can generate ultrafine patterns and has mass production capability has garnered attention recently. Unlike the existing hot embossing techniques, the impact print‐type hot embossing process can generate a microscale pattern that has arbitrary pattern width and depth on a polymer film in real time using a single impact header. For this reason, this process can be applied to various industrial fields that require ultrafine patterns. However, it cannot create intricate patterns due to the limitations of the two‐axis stage control system. Furthermore, its application to a mass production that requires pattern repetition is limited because of the single header system. In this paper, a three‐axis impact print‐type hot embossing system using a multiheader and two algorithms, the impacting coordinate‐based data extraction algorithm and independent driving algorithm, to overcome the limitations of previous systems is proposed. Thanks to the multiheader and control algorithm, this process can generate repetitive patterns in real time, and it can adjust the pattern resolution by controlling the pattern extraction interval. The proposed method is thus expected to be widely applicable to industrial fields that require microscale user‐defined patterns such as mobile sensors and biosensors.
- 6 September 2020
- Published by Wiley in Advanced Materials Technologies
- Vol. 5 (11)
Hot Embossing Process Technology Forming Arbitrary Patterns in Real Time
With the development of mobile sensors and biosensors, an ultrafine process technology that can generate ultrafine patterns and has mass production capability has garnered attention recently. Unlike the existing hot embossing techniques, the impact print‐type hot embossing process can generate a microscale pattern that has arbitrary pattern width and depth on a polymer film in real time using a single impact header. For this reason, this process can be applied to various industrial fields that require ultrafine patterns. However, it cannot create intricate patterns due to the limitations of the two‐axis stage control system. Furthermore, its application to a mass production that requires pattern repetition is limited because of the single header system. In this paper, a three‐axis impact print‐type hot embossing system using a multiheader and two algorithms, the impacting coordinate‐based data extraction algorithm and independent driving algorithm, to overcome the limitations of previous systems is proposed. Thanks to the multiheader and control algorithm, this process can generate repetitive patterns in real time, and it can adjust the pattern resolution by controlling the pattern extraction interval. The proposed method is thus expected to be widely applicable to industrial fields that require microscale user‐defined patterns such as mobile sensors and biosensors.
- Open Access
- 8 June 2020
- Published by MDPI AG in Electronics
- Vol. 9 (6) , 948
Development of an Electromagnetic Actuator for the Hot-Embossing Process
Hot embossing is in the spotlight due to the development of electronic devices, wearable devices, microfluidic channels, and optical devices. The conventional hot-embossing process creates a pattern on polymer film by using a previously patterned stamp that applied heat and pressure. This method has a disadvantage because it depends on the shape of the patterned stamp. For this reason, this method requires a high cost and a lot of time when replacing the stamp for making a new pattern shape or for modifying the error of the pattern. To solve this problem, the impact print-type hot-embossing method was proposed to create arbitrary patterns, and equipment for this method was assembled. In addition, patterning experiments were conducted to imprint several tens of micrometer-sized patterns in real time. For this method, we proposed an electromagnetic actuator for making the hot-embossing print type and for reducing the size of the actuator compared to previous studies. Through the patterning experiment, we determined that the proposed device could engrave fine dot patterns ranging from 60 μm to 120 μm in diameter. We verified the size of the generated pattern by using a confocal microscope, and we found the proposed hot-embossing technology can realize the desired shape in any position by using the proposed technique.
- 8 June 2020
- Published by MDPI AG in Electronics
- Vol. 9 (6) , 948
Open AccessDevelopment of an Electromagnetic Actuator for the Hot-Embossing Process
Hot embossing is in the spotlight due to the development of electronic devices, wearable devices, microfluidic channels, and optical devices. The conventional hot-embossing process creates a pattern on polymer film by using a previously patterned stamp that applied heat and pressure. This method has a disadvantage because it depends on the shape of the patterned stamp. For this reason, this method requires a high cost and a lot of time when replacing the stamp for making a new pattern shape or for modifying the error of the pattern. To solve this problem, the impact print-type hot-embossing method was proposed to create arbitrary patterns, and equipment for this method was assembled. In addition, patterning experiments were conducted to imprint several tens of micrometer-sized patterns in real time. For this method, we proposed an electromagnetic actuator for making the hot-embossing print type and for reducing the size of the actuator compared to previous studies. Through the patterning experiment, we determined that the proposed device could engrave fine dot patterns ranging from 60 μm to 120 μm in diameter. We verified the size of the generated pattern by using a confocal microscope, and we found the proposed hot-embossing technology can realize the desired shape in any position by using the proposed technique.
- 27 November 2019
- Published by Wiley in Advanced Engineering Materials
- Vol. 22 (2) , 1901011
Study of a Line‐Patterning Process Using Impact Print‐Type Hot Embossing Technology
An impact print‐type hot embossing process is a method for creating arbitrary patterns on polymer film in real‐time. This process can form 20–100 μm dot patterns and line patterns using an impact head and a high‐precision moving stage on a polymer film such as polyester (PET) film, polymethyl methacrylate (PMMA) film, polyvinyl chloride (PVC) film without the need for the embossing stamps used for conventional hot embossing processes. This technology can also create line patterns with varying widths and depths by adjusting the positions of the impact header. Moreover, the proposed process can be used to fabricate electrical channels of various widths and depths to install ultrafine electronic devices. Because the proposed method can create ultrafine patterns in real‐time, using it can reduce the cost and time required for pattern modifications and process replacements. In addition, from the result of the bending test after applying the conductive ink to the line pattern, it is known that this process is suitable for making the flexible electrical channel. The advantages of this line‐patterning method will contribute significantly to the current field of hot embossing to create ultrafine patterns by enabling small‐quantity production of various types of products while also facilitating mass production.
- 27 November 2019
- Published by Wiley in Advanced Engineering Materials
- Vol. 22 (2) , 1901011
Study of a Line‐Patterning Process Using Impact Print‐Type Hot Embossing Technology
An impact print‐type hot embossing process is a method for creating arbitrary patterns on polymer film in real‐time. This process can form 20–100 μm dot patterns and line patterns using an impact head and a high‐precision moving stage on a polymer film such as polyester (PET) film, polymethyl methacrylate (PMMA) film, polyvinyl chloride (PVC) film without the need for the embossing stamps used for conventional hot embossing processes. This technology can also create line patterns with varying widths and depths by adjusting the positions of the impact header. Moreover, the proposed process can be used to fabricate electrical channels of various widths and depths to install ultrafine electronic devices. Because the proposed method can create ultrafine patterns in real‐time, using it can reduce the cost and time required for pattern modifications and process replacements. In addition, from the result of the bending test after applying the conductive ink to the line pattern, it is known that this process is suitable for making the flexible electrical channel. The advantages of this line‐patterning method will contribute significantly to the current field of hot embossing to create ultrafine patterns by enabling small‐quantity production of various types of products while also facilitating mass production.
- 28 March 2017
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 46 (20) , 6588-6600
A p-nitroaniline redox-active solid-state electrolyte for battery-like electrochemical capacitive energy storage combined with an asymmetric supercapacitor based on metal oxide functionalized β-polytype porous silicon carbide electrodes
A unique redox active flexible solid-state asymmetric supercapacitor with ultra-high capacitance and energy density was fabricated using a composite comprising MgCo2O4 nanoneedles and micro and mesoporous silicon carbide flakes (SiCF) (SiCF/MgCo2O4) as the positive electrode material. Due to the synergistic effect of the two materials, this hybrid electrode has a high specific capacitance of 516.7 F g−1 at a scan rate of 5 mV s−1 in a 1 M KOH aqueous electrolyte. To obtain a reasonable matching of positive and negative electrode pairs, a composite of Fe3O4 nanoparticles and SiCF (SiCF/Fe3O4) was synthesized for use as a negative electrode material, which shows a high capacitance of 423.2 F g−1 at a scan rate of 5 mV s−1. Therefore, by pairing the SiCF/MgCo2O4 positive electrode and the SiCF/Fe3O4 negative electrode with a redox active quasi-solid-state PVA-KOH-p-nitroaniline (PVA-KOH-PNA) gel electrolyte, a novel solid-state asymmetric supercapacitor device was assembled. Because of the synergistic effect between the highly porous SiCF and the vigorous redox-reaction of metal oxides, the hybrid nanostructure electrodes exhibited outstanding charge storage and transport. In addition, the redox active PVA-KOH-PNA electrolyte adds additional pseudocapacitance, which arises from the nitro-reduction and oxidation and reduction process of the reduction product of p-phenylenediamine, resulting in an enhancement of the capacitance (a specific capacitance of 161.77 F g−1 at a scan rate of 5 mV s−1) and energy density (maximum energy density of 72.79 Wh kg−1 at a power density of 727.96 W kg−1).
- 28 March 2017
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 46 (20) , 6588-6600
A p-nitroaniline redox-active solid-state electrolyte for battery-like electrochemical capacitive energy storage combined with an asymmetric supercapacitor based on metal oxide functionalized β-polytype porous silicon carbide electrodes
A unique redox active flexible solid-state asymmetric supercapacitor with ultra-high capacitance and energy density was fabricated using a composite comprising MgCo2O4 nanoneedles and micro and mesoporous silicon carbide flakes (SiCF) (SiCF/MgCo2O4) as the positive electrode material. Due to the synergistic effect of the two materials, this hybrid electrode has a high specific capacitance of 516.7 F g−1 at a scan rate of 5 mV s−1 in a 1 M KOH aqueous electrolyte. To obtain a reasonable matching of positive and negative electrode pairs, a composite of Fe3O4 nanoparticles and SiCF (SiCF/Fe3O4) was synthesized for use as a negative electrode material, which shows a high capacitance of 423.2 F g−1 at a scan rate of 5 mV s−1. Therefore, by pairing the SiCF/MgCo2O4 positive electrode and the SiCF/Fe3O4 negative electrode with a redox active quasi-solid-state PVA-KOH-p-nitroaniline (PVA-KOH-PNA) gel electrolyte, a novel solid-state asymmetric supercapacitor device was assembled. Because of the synergistic effect between the highly porous SiCF and the vigorous redox-reaction of metal oxides, the hybrid nanostructure electrodes exhibited outstanding charge storage and transport. In addition, the redox active PVA-KOH-PNA electrolyte adds additional pseudocapacitance, which arises from the nitro-reduction and oxidation and reduction process of the reduction product of p-phenylenediamine, resulting in an enhancement of the capacitance (a specific capacitance of 161.77 F g−1 at a scan rate of 5 mV s−1) and energy density (maximum energy density of 72.79 Wh kg−1 at a power density of 727.96 W kg−1).
- 1 August 2014
- Published by Elsevier in Ceramics International
- Vol. 40 (7) , 10933-10943
Fabrication of UV-curable polyurethane acrylate composites containing surface-modified boron nitride for underwater sonar encapsulant application
- 1 August 2014
- Published by Elsevier in Ceramics International
- Vol. 40 (7) , 10933-10943
Fabrication of UV-curable polyurethane acrylate composites containing surface-modified boron nitride for underwater sonar encapsulant application