VKVolodymyr Kvasnikov

Volodymyr Kvasnikov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Volodymyr Kvasnikov has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Calibration of precision electrical resistance standards in time constant measurements using the National Standard of Units of Electrical Capacitance and Loss Factor

    by Serhii Shevkun, Volodymyr Kvasnikov, Maryna Dobroliubova, Oleksii Statsenko

    The article addresses the development of a calibration method for precision AC electrical resistance standards with respect to the time constant parameter using the National Standard of Units of Electrical Capacitance and Loss Factor DETU 08-06-01. It is shown that when high-accuracy reference resistors are used in AC circuits, measurement results are significantly affected by parasitic reactive components, particularly parasitic inductance and parasitic capacitance, which lead to the appearance of a time constant and frequency dependence of impedance. An improved method for calibrating precision resistance standards by the time constant parameter using the universal reference complex impedance comparator 5100 has been developed. The method involves calibration of the comparator using an external reference standard, determination of the comparison error, application of repeated measurements, and uncertainty evaluation in accordance with modern international approaches. A measurement model equation for the determination of the time constant is proposed, taking into account the main influencing factors, such as uncertainty of the reference standard, comparator error, temperature dependence, drift of metrological characteristics, and quantization effects. An example of establishing an uncertainty budget for the calibration of MAС-2 resistance standards with a nominal resistance of 10 kOhm, using the time constant parameter, is presented. The practical significance of the work lies in ensuring the metrological traceability of time constant measurements from international standards to the national standard and working measuring instruments. The research results can be used to calibrate high-precision electrical resistance standards, digital impedance bridges, and LCR meters.

  • UNCERTAINTY EVALUATION OF THE DISSIPATION FACTOR IN THE CALIBRATION OF PRECISION CAPACITANCE STANDARDS

    by S.M. Shevkun, V.P. Kvasnikov, M.V. Dobroliubova, O.V. Statsenko, M.S. Shevkun

    This paper presents a methodological and metrological approach to thecalibration of precision capacitance standards with respect to the dissipation factor (loss factor) at the State Primary Standard of Electrical Capacitance and Dissipation Factor. The relevance of the study is driven by the need to ensure high accuracy measurements of capacitance and loss parameters in capacitors widely used in measurement systems and instrumentation, power engineering, telecommunications, and, in particular, electrical insulation testing equipment. The dissipation factor is an important characteristic of dielectric materials and capacitorsdetermining the level of energy losses in the dielectric and significantly affecting the accuracy of complex impedance measurements, as well as the results of electrical insulation diagnostics. A measurement system used for the calibration of precision capacitance standards with respect to the dissipation factor is presented, and its operating principle is described. A mathematicalmeasurement model has been developed that accounts for the main contributors affecting the determination of the dissipation factor, including measuring bridge parameters, quadrature signal errors, frequency and supply voltage instability, and parasitic losses in the measurement circuit. The measurement model equation is presented, and the physical meaning of its individual components is discussed in detail. Particular attention is devoted to the analysis of measurement uncertainty sources and the development of an uncertainty budget for the calibration procedure. An example is provided for calculating the combined standard uncertainty and expanded uncertainty of the calibration result for a precision capacitance standard with respect to the dissipation factor. The obtained results may be used in the development of calibration procedures for capacitance standards based on the dissipation factor and in ensuring the metrological traceability of capacitor parameter measurements to the State Primary Standard. References 20, figures 5, table 1.


  • A METHOD FOR CALIBRATING PRECISION VARIABLE CAPACITORS OVER THE FULL CAPACITANCE AND FREQUENCY RANGE

    by S. M. Shevkun, V. P. Kvasnikov

    The paper addresses the calibration of precision variable capacitors used as reference standards and high-accuracy elements in AC measurement circuits. The structural features of precision air capacitors are analysed, along with the factors affecting measurement results and the main sources of uncertainty during calibration. A method is proposed for calibrating precision variable capacitors over the full range of capacitance values and frequencies using the National Standard of the Units of Electrical Capacitance and Loss Factor, employing a universal automated comparator and a systematized approach to measurement uncertainty evaluation. Particular attention is given to accounting for the temperature and frequency dependences of the measurement system parameters, corrections for vernier scale readings, drift of reference standards, and the effects of mechanical hysteresis and backlash in the capacitance-setting mechanism. A measurement model equation is presented, together with an illustrative uncertainty budget and recommendations for reporting calibration results in the form of tables and calibration diagrams. The results of this work can be used to improve the accuracy and ensure metrological traceability of precision variable capacitor parameters at national metrology institutes and calibration laboratories. У статті розглянуто особливості калібрування прецизійних конденсаторів змінної ємності, які використовуються як еталонні міри та високоточні елементи вимірювальних кіл змінного струму. Проаналізовано конструктивні особливості прецизійних повітряних конденсаторів, фактори, що впливають на результати вимірювань, а також основні джерела невизначеності під час калібрування. Запропоновано метод калібрування прецизійних конденсаторів змінної ємності у повному діапазоні значень і частот на Національному еталоні одиниць електричної ємності та фактора втрат із застосуванням універсального автоматизованого компаратора та систематизованого підходу до оцінювання невизначеності вимірювань. Особливу увагу приділено урахуванню температурної та частотної залежності параметрів вимірювальної системи, поправкам на ноніус шкали, дрейфу еталонних мір, а також впливу механічного гістерезису та люфту механізму встановлення ємності. Наведено модельне рівняння вимірювань, приклад формування бюджету невизначеності та рекомендації щодо подання результатів калібрування у вигляді таблиць і калібрувальних діаграм. Результати роботи можуть бути використані для підвищення точності та забезпечення метрологічної простежуваності параметрів прецизійних змінних конденсаторів у національних метрологічних інститутах і калібрувальних лабораторіях.

  • Open Access

    Optimizing the uncertainty of measurements on a coordinate measuring machine when controlling complex geometric surfaces

    by Volodymyr Kvasnikov, Oleg Chalyi, Maryna Graf, Anatolii Perederko

    The object of this study is the process of optimizing measurement uncertainty on a coordinate measuring machine (CMM) when inspecting complex geometric surfaces. The problem addressed was insufficient accuracy and efficiency of measurements of complex parts on CMMs under production conditions. A method for optimizing measurement uncertainty has been devised, which includes a mathematical model of the measurement process and an adaptive algorithm for optimizing the control strategy, based on the Monte Carlo method. The model takes into account the geometry of surfaces and CMM characteristics, while the algorithm dynamically adjusts measurement parameters. The results demonstrate a reduction in measurement uncertainty by 15–20 % and a reduction in inspection time by 10–12 % compared to conventional methods. This is achieved by taking into account the specificity of complex surface geometry and an adaptive approach. The uniqueness of the developed method is the ability to automatically adapt to different types of CMMs and measured objects, optimizing the number and location of measurement points, the speed of probe movement, and its contact force with the surface. The method takes into account not only the geometric parameters of objects but also the characteristics of the CMM itself, which allows for high accuracy. The method is particularly effective for parts with complex geometry, in which conventional methods often lead to significant errors. Practical application is possible at machine-building enterprises for quality control of complex parts, especially in serial production. The implementation of the developed method allows for improving product quality and reducing production costs by 8–10 % due to optimization of the control process and reduction of defects

  • Open Access

    Control of linear motors with gas lubrication of the coordinate measurement system

    by V.P. Kvasnikov, V.M. Ilchenko, K.V. Molchanova

    The problem of the influence of non-Gaussian disturbance on the control system during the measurement of coordinate measuring system of mechanical quantities of objects with a complex spatial surface is described in the article. It is shown that the accuracy of the filtering of the random process of measuring mechanical quantities is significantly affected if to take into account the disturbing factors with non-Gaussian probability distribution density.

  • Open Access

    Devising a technique for assessing the accuracy of measuring electric motor torque

    by Volodymyr Kvasnikov, Dmytro Kvashuk, Mykhailo Prygara, Dmytro Siryy, Oleksii Shelukha

    The object of this study is a technique for assessing the accuracy of measuring the torques of electric motors. This technique is based on the improvement of dynamic torque measurement processes under transient operating modes. Special attention was paid to devising adaptive methods to normalize the output signal, which take into account vibrations and nonlinearities of the measuring channel. In order to improve the accuracy of measurements under conditions when the controlled parameter has different deviations from its average value, a technique for integrating time measurement intervals was proposed. That has made it possible to generalize parameter fluctuations, providing more stable measurement results. This paper reports the simulation of the process of measuring torques of electric motors under transient operating modes and under vibration conditions. That has made it possible to test the proposed technique for estimating the variance of the methodological error, which includes the integration of measurement time intervals and makes it possible to increase the accuracy of the measurement under the conditions of transient modes in electric motor operation. An algorithm for correcting the error of the dynamic torque of the electric motor has been proposed, which allows it to be corrected. This becomes possible owing to the use of a reference measure and the proposed technique for determining the deviations of the controlled parameter of the measured quantity, as well as the automatic calibration of measuring transducers. The algorithm allows for flexible settings of the corrective action, expanding the potential of electric motor control systems. It can complement soft measurement methods, as well as adjust the threshold values of deviations under different operating modes of electric motors. This allows the measured systems to better adapt to changes in operating conditions, to adjust the specified measurement accuracy under conditions of uncertainty

  • Open Access

    Modeling and algorithmization of the pricing process in electronic commerce using software agents

    by E.V. Zelenko, V.P. Kvasnikov

    The article is devoted to the improvement of the object-oriented programming method for the development of software used in electronic commerce, using an agent-oriented approach. Experimental studies were conducted to compare traditional and improved methods for developing software used in e-commerce. In the course of research due to the application of an agent-oriented approach and a platform for the development of software agents, the following were found: an increase in the speed of software implementation of the user interface and asynchronous communication between autonomous system components; reducing the number of system processes used; reduction of connectivity between system components; increasing the efficiency of the software implementation of the developed data processing algorithm in terms of calculation accuracy; expanding the set of properties and potential capabilities of the software tool.

  • Open Access

    Devising a technique for measuring torque of electric motors using machine vision

    by Volodymyr Kvasnikov, Dmytro Kvashuk, Mykhailo Prygara, Oleksii Shelukha, Kateryna Molchanova

    The object of research is the technique for measuring torques of electric motors. The main problem to be solved is the need to expand the range of informative parameters used in transmission torque converters of electric motors. This need arises from the design complications of placing the measuring devices directly on the motor shaft. As part of the study, a system was designed for determining the torques of electric motors, which combines the procedure for assessing the load on the shaft and software tools for visually determining the quantitative characteristics of such a load using machine vision. In order to acquire visual characteristics of the twisting of the shaft, a special coupling with an insert containing a liquid was designed. This coupling is able to change its shape in proportion to the load on electric motor shaft. The proposed visual control system, based on video information processing techniques, makes it possible to analyze changes in the shape of the coupling caused by the action of the torque. Features of the application of the proposed measurement technique are that there is no need to place electronic components of the measuring transducer directly on the shaft. Due to the specified features, the proposed procedure provides a solution to the problems of torque measurement in aggressive environments, which is of crucial importance for the efficiency of some specific production processes. Analysis of the visual characteristics of torque showed that the proposed approach could be applied in measuring transducers. At the same time, the results of testing the procedure confirmed that it requires the use of high-precision video recording equipment. This paves the way for the design of new, more modern, and reliable measurement systems that could be used in a wide range of industrial solutions


  • Open Access

    A METHOD OF ESTIMATING PROBABILISTIC CHARACTERISTICS OF SIGNALS IN CONDITIONS OF NON-LINEARITY OF THE MEASURING CHANNEL OF TORQUE CON-VERTERS

    by National Aviation University, V. P. Kvasnikov, D. M. Kvashuk, K. V. Molchanova, V. M. Ilchenko

    The paper proposes a method for calculating the probabilistic characteristics of signals for a wide class of nonlinear torque transducers. The presented approach is based on modeling the process of processing the input signal, taking into account the multiplicative error of the transducer. A methodology has been developed for estimating the probability density function and numerical characteristics of the output signal of a nonlinear torque transducer for different distribution laws of the input signal and types of nonlinear transformation functions. To achieve this goal, the following steps were performed: algorithms and computer programs were developed for numerical simulation and calculation of the characteristics of signals at the output of a nonlinear transducer for given input parameters, a series of computational experiments were conducted for different combinations of distribution laws of input signals and nonlinear transformation functions, the influence of different distribution laws of the input signal on the probability density function and numerical characteristics of the output signal was investigated, the influence of different types of nonlinear transformation functions on the probability density function and numerical characteristics of the output signal was studied, the obtained results were analyzed, and recommendations were formulated for the choice of the nonlinear transformation function and the distribution law of the input signal to achieve the desired characteristics of the output signal of the torque transducer. The paper discusses the features of the proposed algorithm, as well as the simulation results for a number of examples of transducers with different nonlinear characteristics and parameters of multiplicative disturbance. An analysis of the accuracy of the obtained estimates of probabilistic characteristics is carried out. The developed algorithm allows estimating the probabilistic characteristics of the output signals of nonlinear torque transducers at the design stage, which contributes to improving the quality of the development of control systems. This method can be useful for engineers and scientists involved in the design and analysis of automatic control systems with nonlinear elements.

  • Open Access

    Designing tools for assessing the reliability of electric motor torque measurements by using identifiers of anomalous deviations in a noisy signal system

    by Volodymyr Kvasnikov, Dmytro Kvashuk, Mykhailo Prygara, Jaroslav Legeta

    The problem of the reliability of measurements of rotational parameters of electric motors was solved, which was focused on the development of an algorithm for evaluating measurements under conditions of additional noise. An analysis of methodological approaches and mathematical tools used to process and interpret the uncertainty of measurement results was carried out. Cases where they may not be effective due to high noise levels were considered. To detect anomalies in the signal, an algorithm for assessing the reliability of measurements using fuzzy logic was proposed. A structural diagram of the model for measuring the torque of an electric motor under the conditions of a noisy signal was developed, where transfer functions were used to model the angular velocity and torque parameters. A method for detecting anomalies in noisy signals is presented, which identifies the amplitude and time characteristics of spiking pulses. The method includes the application of a wide range of analytical tools for deep analysis of signals and is particularly effective for detecting anomalies that may be hidden in background noise. A prototype of a measuring bench was developed, which uses neural networks to detect anomalies when measuring the rotational parameters of electric motors, which made it possible to obtain a training sample using a sample electric motor and apply it to evaluate the parameters of another electric motor. In a practical aspect, the developed methods and technological solutions for improving the reliability of measurements of rotational parameters of electric motors could be used to make corrections in existing systems. In particular, they could be used in industry, electric transport, as well as in the aerospace and military sectors where the reliability of measuring systems is important