Mariia Kataieva
Research Subjects
Mariia Kataieva has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
National Aviation University
4 shared publications- Volodymyr Kvasnikov
State University «Kyiv Aviation Institute», Ukraine
4 shared publications - Дмитро Михайлович Квашук
Національний авіаційний університет
3 shared publications - Д.п. Орнатський
National Aviation University, Husar Lubomyr ave., 1, Kyiv, 03058, Ukraine
2 shared publications - Anastasiia Shcherban
Igor Sikorsky Kyiv Polytechnic Institute
1 shared publication - Andrii Bieliatynskyi
North Minzu University, China
1 shared publication
Latest Publications
- 26 October 2025
- Published by Springer Nature
- p. 69-82
Method of Increasing the Accuracy of Spatial Coordinates Determining Using a Coordinate-Measuring Arm
- 26 October 2025
- Published by Springer Nature
- p. 69-82
Method of Increasing the Accuracy of Spatial Coordinates Determining Using a Coordinate-Measuring Arm
- 30 May 2022
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 2 (5(36))
A Method of Correcting the Output Signal of a Scanning Probe Microscope for the Study of Nanoobjects
Recent advances in nanotechnology include the use of measuring devices that can study physical properties at the atomic and molecular levels and store high-density measurement information. It is proved that the most promising measuring instruments in the nanometer range are measuring devices based on scanning probe microscopes (SPM). Based on the analysis of studies, one of the main problems in working with nanoobjects and nanostructures is associated with ultra-low signal levels and the influence of external destabilizing factors. In this regard, the problem of improving existing and developing new methods of processing the measurement signal of SPM with increased accuracy and speed. The article considers the methods of increasing the accuracy of the output signal of the SPM considering the influence of destabilizing factors. A method of differentiation of combined signals has been developed, which involves the conversion of peaks of a multicomponent signal to reduce noise and minimize the impact of other sources of error from destabilizing factors. The advantage of the developed method is the possibility of its automation and efficient implementation for any measuring devices with a microprobe. Based on the proposed method, an algorithm for separating the combined signals was developed and a method for calculating the resolution of the SPM signal was proposed. An error correction method is proposed that is suitable for digital automated signal processing and helps to increase the accuracy and precision of measurements using SPM. Thus, the developed method of differentiation of combined signals allows to effectively adjust the hardware function of SPM to increase the reliability of recognition of combined peaks of signals while determining their intensities.
- 30 May 2022
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 2 (5(36))
A Method of Correcting the Output Signal of a Scanning Probe Microscope for the Study of Nanoobjects
Recent advances in nanotechnology include the use of measuring devices that can study physical properties at the atomic and molecular levels and store high-density measurement information. It is proved that the most promising measuring instruments in the nanometer range are measuring devices based on scanning probe microscopes (SPM). Based on the analysis of studies, one of the main problems in working with nanoobjects and nanostructures is associated with ultra-low signal levels and the influence of external destabilizing factors. In this regard, the problem of improving existing and developing new methods of processing the measurement signal of SPM with increased accuracy and speed. The article considers the methods of increasing the accuracy of the output signal of the SPM considering the influence of destabilizing factors. A method of differentiation of combined signals has been developed, which involves the conversion of peaks of a multicomponent signal to reduce noise and minimize the impact of other sources of error from destabilizing factors. The advantage of the developed method is the possibility of its automation and efficient implementation for any measuring devices with a microprobe. Based on the proposed method, an algorithm for separating the combined signals was developed and a method for calculating the resolution of the SPM signal was proposed. An error correction method is proposed that is suitable for digital automated signal processing and helps to increase the accuracy and precision of measurements using SPM. Thus, the developed method of differentiation of combined signals allows to effectively adjust the hardware function of SPM to increase the reliability of recognition of combined peaks of signals while determining their intensities.
- Open Access
- 1 January 2022
- Published by State University of Intelligent Technologies and Telecommunications in Key Title: Zbìrnik Naukovih Pracʹ Odesʹkoï Deržavnoï Akademìï Tehnìčnogo Regulûvannâ ta âkostì
- No. 2(21),p. 14-19
METHODS OF INCREASING THE ACCURACY OF MEASUREMENT WITH A SCANNING PROBE MICROSCOPE DEPENDING ON THE GEOMETRY OF THE PROBE
У статті аналіз впливу різних типів геометрії зонду скануючого зондового мікроскопу на особливості вимірювання топографії поверхні нанооб’єкта. На основі проведених досліджень запропоновано методи відновлення зображень СЗМ, які побудовані на математичній та комп'ютерній обробці даних СЗМ, що враховує конкретну форму наконечника зонду та дозволяє покращити метрологічні характеристики вимірювальної інформації. Доведено, що найефективнішим способом цифрової корекції відображення топографії поверхні є чисельна деконволюція з використанням зображення наконечника, отриманого експериментально шляхом сканування тестових структур з добре відомою топографією та подальшою комп'ютерною обробкою даних. Запропоновано метод часткового відновлення топографії, який характеризується гнучкість до поставлених метрологічних задач і спрямований на підвищення швидкодії обчислювальних операцій із забезпеченням необхідної точності вимірювальної інформації.
- 1 January 2022
- Published by State University of Intelligent Technologies and Telecommunications in Key Title: Zbìrnik Naukovih Pracʹ Odesʹkoï Deržavnoï Akademìï Tehnìčnogo Regulûvannâ ta âkostì
- No. 2(21),p. 14-19
Open AccessMETHODS OF INCREASING THE ACCURACY OF MEASUREMENT WITH A SCANNING PROBE MICROSCOPE DEPENDING ON THE GEOMETRY OF THE PROBE
У статті аналіз впливу різних типів геометрії зонду скануючого зондового мікроскопу на особливості вимірювання топографії поверхні нанооб’єкта. На основі проведених досліджень запропоновано методи відновлення зображень СЗМ, які побудовані на математичній та комп'ютерній обробці даних СЗМ, що враховує конкретну форму наконечника зонду та дозволяє покращити метрологічні характеристики вимірювальної інформації. Доведено, що найефективнішим способом цифрової корекції відображення топографії поверхні є чисельна деконволюція з використанням зображення наконечника, отриманого експериментально шляхом сканування тестових структур з добре відомою топографією та подальшою комп'ютерною обробкою даних. Запропоновано метод часткового відновлення топографії, який характеризується гнучкість до поставлених метрологічних задач і спрямований на підвищення швидкодії обчислювальних операцій із забезпеченням необхідної точності вимірювальної інформації.
- 2 November 2021
- Published by Springer Nature
- p. 145-154
Structural-Kinematic Analysis and Synthesis of Measuring Systems Using a Scanning Probe Microscope
- 2 November 2021
- Published by Springer Nature
- p. 145-154
Structural-Kinematic Analysis and Synthesis of Measuring Systems Using a Scanning Probe Microscope
- Open Access
- 30 June 2021
- Published by Politechnika Lubelska in Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
- Vol. 11 (2) , 52-55
METHOD OF OBTAINING THE SPECTRAL CHARACTERISTICS OF THE SCANNING PROBE MICROSCOPE
The article discusses methods and algorithms for digital processing and filtering when carrying out nano-measurements using a scanning probe microscope. The paper discusses frequency methods for improving images, in particular, the use of the Fourier transforms with various filtering methods to improve the quality of the resulting image. Stable computational algorithms have been developed for transforming discrete signals based on the Fourier transform. Methods for the interpretation of the numerical results of the discrete Fourier transform in such packages as Matlab, MathCad, Matematica are presented. It is proposed to use a window transform, developed based on the Fourier transform, which makes it possible to single out the informative features of the signal and to reduce the influence of the destabilizing factors that arise when processing signals from a scanning gold microscope in real conditions.
- 30 June 2021
- Published by Politechnika Lubelska in Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
- Vol. 11 (2) , 52-55
Open AccessMETHOD OF OBTAINING THE SPECTRAL CHARACTERISTICS OF THE SCANNING PROBE MICROSCOPE
The article discusses methods and algorithms for digital processing and filtering when carrying out nano-measurements using a scanning probe microscope. The paper discusses frequency methods for improving images, in particular, the use of the Fourier transforms with various filtering methods to improve the quality of the resulting image. Stable computational algorithms have been developed for transforming discrete signals based on the Fourier transform. Methods for the interpretation of the numerical results of the discrete Fourier transform in such packages as Matlab, MathCad, Matematica are presented. It is proposed to use a window transform, developed based on the Fourier transform, which makes it possible to single out the informative features of the signal and to reduce the influence of the destabilizing factors that arise when processing signals from a scanning gold microscope in real conditions.
- 1 January 2021
- Published by State University of Intelligent Technologies and Telecommunications in Key Title: Zbìrnik Naukovih Pracʹ Odesʹkoï Deržavnoï Akademìï Tehnìčnogo Regulûvannâ ta âkostì
- No. 2(19),p. 37-47
METHODS OF MEASUREMENT OF PERFORMANCE CHARACTERISTICS OF ELECTRIC GENERATORS
У статті вивчається залежність обертального моменту електрогенераторів та їх вихідних параметрів. На основі досліджень запропоновано метод вимірювання обертального моменту з використанням індуктивного сенсора, що дозволяє покращити метрологічні характеристики вимірювального каналу шляхом підвищення чутливості вимірювання. Таке підвищення досягається за рахунок того, що на котушки, які змінюють свою індуктивність під дією торсіонного навантаження на вал електродвигуна, не впливають електромагнітні перешкоди, що створюються електрогенератором під час роботи. Для обробки результатів вимірювань та дослідження похибок, використовувався моделюючий комплекс Matlab/Simulink, це дозволило візуалізувати перехідну характеристику вимірювального сигналу та оцінити можливу похибку.
- 1 January 2021
- Published by State University of Intelligent Technologies and Telecommunications in Key Title: Zbìrnik Naukovih Pracʹ Odesʹkoï Deržavnoï Akademìï Tehnìčnogo Regulûvannâ ta âkostì
- No. 2(19),p. 37-47
METHODS OF MEASUREMENT OF PERFORMANCE CHARACTERISTICS OF ELECTRIC GENERATORS
У статті вивчається залежність обертального моменту електрогенераторів та їх вихідних параметрів. На основі досліджень запропоновано метод вимірювання обертального моменту з використанням індуктивного сенсора, що дозволяє покращити метрологічні характеристики вимірювального каналу шляхом підвищення чутливості вимірювання. Таке підвищення досягається за рахунок того, що на котушки, які змінюють свою індуктивність під дією торсіонного навантаження на вал електродвигуна, не впливають електромагнітні перешкоди, що створюються електрогенератором під час роботи. Для обробки результатів вимірювань та дослідження похибок, використовувався моделюючий комплекс Matlab/Simulink, це дозволило візуалізувати перехідну характеристику вимірювального сигналу та оцінити можливу похибку.
- 1 January 2021
- Published by State University of Intelligent Technologies and Telecommunications in Key Title: Zbìrnik Naukovih Pracʹ Odesʹkoï Deržavnoï Akademìï Tehnìčnogo Regulûvannâ ta âkostì
- No. 1(18),p. 42-52
DEVELOPMENT OF INFORMATION-MEASURING DIAGNOSIS SYSTEM WORKING CHARACTERISTICS OF ELECTRIC MOTORS
У статті представлено спосіб побудови інформаційно-вимірювальної системи діагностики робочих характеристик електродвигунів. З метою передачі даних отриманих від вимірювальних датчиків до серверного додатку використовувався мікроконтролер ESP8266. Запропоновано спосіб візуалізації отриманих даних з використанням web-серверних технологій. Проведено тестування запропонованої системи з використанням електродвигуна постійного струму серії RS-775. Досліджено робочі характеристики прототипу приладу для вимірювання обертального моменту електродвигуна, який використовувався у запропонованій вимірювальній системі. Визначено його похибку шляхом розрахунку вибіркового стандартного відхилення від очікуваних результатів.
- 1 January 2021
- Published by State University of Intelligent Technologies and Telecommunications in Key Title: Zbìrnik Naukovih Pracʹ Odesʹkoï Deržavnoï Akademìï Tehnìčnogo Regulûvannâ ta âkostì
- No. 1(18),p. 42-52
DEVELOPMENT OF INFORMATION-MEASURING DIAGNOSIS SYSTEM WORKING CHARACTERISTICS OF ELECTRIC MOTORS
У статті представлено спосіб побудови інформаційно-вимірювальної системи діагностики робочих характеристик електродвигунів. З метою передачі даних отриманих від вимірювальних датчиків до серверного додатку використовувався мікроконтролер ESP8266. Запропоновано спосіб візуалізації отриманих даних з використанням web-серверних технологій. Проведено тестування запропонованої системи з використанням електродвигуна постійного струму серії RS-775. Досліджено робочі характеристики прототипу приладу для вимірювання обертального моменту електродвигуна, який використовувався у запропонованій вимірювальній системі. Визначено його похибку шляхом розрахунку вибіркового стандартного відхилення від очікуваних результатів.