NKNaoto Kakuta

Naoto Kakuta

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Naoto Kakuta has a total of 86 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Near-infrared imaging of interfacial instability between aqueous acid and base solutions

    by Naoto Kakuta, Takato Uema, Gia Ginelle Carandang

    Buoyancy-driven instabilities often occur at the interface between two miscible reactive solutions due to complex density stratifications arising from differences in solutal concentrations and diffusion coefficients. In this study, to visualize and characterize these instabilities, two-dimensional concentration maps of sulfuric acid (H 2 SO 4 ), sodium hydroxide (NaOH), and sodium sulfate (Na 2 SO 4 ) were simultaneously obtained for a system where an aqueous H 2 SO 4 solution was layered over aqueous NaOH in a microfluidic channel and a modified Hele–Shaw cell. This measurement method exploits the distinct spectral variations of the near-infrared water absorption band induced by these species. The resulting maps revealed that the H 2 SO 4 and NaOH regions remained separated, with the product Na 2 SO 4 forming at the interface. Subsequently, the interface underwent fluctuations, triggering upward convection plumes from the H 2 SO 4 –Na 2 SO 4 boundary and downward finger-like plumes from the Na 2 SO 4 –NaOH boundary. Density profiling revealed distinct driving mechanisms for these asymmetric instabilities: a locally unstable stratification (heavy over light) at the upper interface drove Rayleigh–Taylor convection, whereas the lower interface remained statically stable, indicating that the downward fingers were driven by double-diffusive instability. Graphical abstract

  • Near-infrared imaging of buoyancy plumes in diluted ionic solutions during electrodeposition on electrode surfaces

    by Abdul Fattah Farid Nasir, Yuina Abe, Naoto Kakuta

    Understanding the development of buoyancy-driven plumes generated by electrochemical reactions is crucial for revealing how flow behavior can be influenced and optimized through electrode architecture and electrolyte formulation. However, their roles in transparent aqueous electrolyte systems remain underexplored. To address this, this study develops a near-infrared (NIR) imaging method for the in-situ visualization of buoyancy-driven plumes generated from a zinc acetate electrolyte/electrode interface during electrochemical reduction. The method uses the concentration-dependent absorbance of zinc acetate at a primary wavelength of 1579 nm, corresponding to the isosbestic point for acetate with supplementary wavelengths of 1308 and 1445 nm. Two-dimensional absorbance images of the zinc aqueous solution were acquired using a condenser-illuminated microscope coupled with an NIR camera. A custom microreactor cell was employed, which modeled a zinc–air battery configuration, and incorporated a 1 mm optical path length along with a circular, 1 mm-diameter glassy carbon working electrode. Potentiostatic reductions were performed at −1.5, −2.0, and −2.5 V using bulk zinc acetate concentrations of 0.2, 0.4, 0.6, 0.8, and 1.0 M. The quality of intensity images was enhanced through baseline correction, Wave-U-Net convolutional neural network denoising, and second-stage smoothing. The resulting images and absorbance profiles exhibited edge-initiated depletion plumes of reduced Zn 2+ that subsequently merged and redistributed species toward the central axis. In terms of potential dependence, the more cathodic potentials yielded earlier onsets with greater plume penetration. In terms of concentration dependence, lower bulk concentrations (0.2–0.4 M) displayed earlier and stronger plumes than higher concentrations (0.8–1.0 M). These findings establish NIR imaging as a practical, minimally perturbative modality for quantifying reaction-coupled concentration fields and buoyancy-driven transport, providing a guide for future electrode design, electrolyte formulation, and magnetization effects in electrochemical systems.

  • Open Access

    Effect of process parameters on grain morphology and high-temperature mechanical properties of Inconel 718 manufactured by EB-PBF

    by Hasina Tabassum Chowdhury, Aoi Morishige, Thaviti Naidu Palleda, Naoto Kakuta, Koji Kakehi, Ayumu Miyakita


  • Open Access

    Near-infrared imaging of heat transfer behavior between gadolinium and fluid during magnetization/demagnetization process of magnetocaloric effect

    by The-Anh Nguyen, Naoto Kakuta, Ken-Ichi Uchida, Hosei Nagano

    This paper reports on the application of a near-infrared (NIR) imaging system for visualizing heat transfer dynamics from a bulk gadolinium (Gd) sample to the surrounding water during the magnetization/demagnetization process of the magnetocaloric effect (MCE). The suggested approach relied on the spectral variation in water absorption band at 1150 nm wavelength within the NIR spectrum. An experimental setup integrated a telecentric uniform-illumination system, a halogen lamp, and an NIR camera to enable real-time monitoring of a single magnetization and demagnetization cycle induced by an external magnetic field, which was generated by a permanent-magnet-based magnetic circuit. Two-dimensional absorbance images captured during this cycle clearly depicted the thermal energy generated by the MCE in water. Furthermore, an analysis of the thermal boundary layer and the quantification of heat transfer from Gd to water provided insights into the dynamics over time. These results indicated the potential of our NIR imaging techniques in optimizing thermal–fluid interactions within MCE systems, thereby improving the design and efficiency of magnetic refrigeration systems.


  • Open Access

    Effects of Preheating on Thermal Behavior in Inconel 718 Processed by Additive Manufacturing

    by Hasina Tabassum Chowdhury, Thaviti Naidu Palleda, Naoto Kakuta, Koji Kakehi

    Preheating is important to improve the mechanical properties of nickel-based superalloys processed by additive manufacturing. The microstructure of IN718 was found to be influenced by the preheating temperature. Different preheating temperatures affect mechanical properties by changing microstructures. This work aims to clarify the thermal behavior for two preheated base plate temperatures (200 °C and 600 °C) on the IN718 superalloy built by the selective laser melting (SLM) process using the finite element method and experiments. The simulation findings indicate that the preheated 600 °C model has a deeper melt pool, a slower transformation of liquid to solid, and a slower cooling rate compared to the 200 °C model. As a result, the interdendritic Niobium (Nb) segregation of IN718 is reduced, thus improving the mechanical properties of additive-manufactured IN718 using the laser. The solidification map derived from the simulation indicates a columnar microstructure for the IN718 superalloy. Preheating increased the size of the dendrite structure and reduced elemental segregation, but it did not affect the morphology or size of crystal grains. We focused on comparing the temperature gradient and cooling rate for the two preheated base plate temperatures using the solidification map of IN718. The simulation confirmed that preheating does not affect the grain structure.


  • Open Access

    Effects of base plate temperature on microstructure evolution and high-temperature mechanical properties of IN718 processed by laser powder bed fusion using simulation and experiment

    by Koji Kakehi, Hasina Tabassum Chowdhury, Yusuke Shinoda, Palleda Thaviti Naidu, Naoto Kakuta, Shohei Ishisako

    Base plate preheating is a relatively new strategy to influence the mechanical properties and microstructure of IN718. Base plate preheating was studied to reduce Niobium (Nb) segregation in the interdendritic region of IN718 superalloy and to improve mechanical properties through the laser powder bed fusion (L-PBF) process. Here, we compared experimental results for high-temperature (650℃) mechanical properties of specimens built with 200℃ (PH200) and 600℃ (PH600) preheated base plates. The as-built PH200 and PH600 specimens had relatively similar grain morphologies and orientations along the building direction. The PH200 specimen showed a cellular structure and higher Nb segregation at the interdendritic region, whereas the PH600 specimen had a dendritic structure and lower Nb segregation. The lower amount of Nb segregation in the PH600 specimen is mainly because of the cooling rate difference between specimens during the L-PBF process. The PH600 specimen exhibited slightly better tensile properties, longer creep life, and elongation than the PH200 specimen in both the as-built and heat-treated conditions. These differences mainly occurred due to differences in Laves and δ-phase fractions between the PH200 and PH600 specimens. The simulation result indicates that the temperature distribution in the block remains relatively uniform during the building process.


  • Open Access

    Visualization and quantification of heat transfer from small heat sources using a near-infrared imaging method

    by The-Anh Nguyen, Naoto Kakuta

    本研究は近赤外イメージング法を用いて微小発熱体から水への熱伝達を可視化した実験的研究である。近赤外イメージング法は波長1150 nmにおける水の吸収係数の温度依存性に基づいている。水の入った厚さ(光路長)10 mmのセルの底に9 mm x 9 mm x 5 mm のフィン型ヒートシンクと誘導加熱プレートを設置し,テレセントリック照明・受光系によって吸光度画像を取得した。画像はフィン近傍での温度上昇を捉えるとともに、初期段階では顕著な自然対流は発生せず、高温領域の形状は保たれることを示した。その後、誘導加熱強度に応じて、分岐型の熱プルームが観察された。さらに、ヒートシンクからの放熱量と等価な、水の単位時間当たりの熱量変化を吸光度から求めた。放熱量は時間によらず一定で、誘導加熱強度とともに増加する合理的な結果が得られた。

  • Near-infrared imaging of water vapour in air

    by Naoto Kakuta, Shintaro Ozawa

    This study proposes a near-infrared (NIR) imaging method for two-dimensional distributions of water vapour (WV) in the open air. A wavelength of 1872 nm, at which the dependence of the absorption coefficient on the WV concentration is the largest in the v 2 + v 3 band of water molecules, was employed for imaging. The measurement system was a star imaging system, comprising a laser light source and an NIR camera. A measurement space with 0.08 m diameter and 0.30 m length was ensured to obtain the 2D absorbance images of moist air emitted from a gas nozzle and the breath air exhaled from a human subject with and without a mask. The images clearly showed the distributions of WV that flowed around a pipe and impinged on a plate. The exhaled air was clearly visualised, and the difference in air permeability between the masks was demonstrated. These results indicate the potential of the NIR imaging method for various applications that require WV flow visualisation, WV source identification, and evaporation process observation.