LFLiang Fang

Liang Fang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Liang Fang has a total of 68 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sb2O3-mediated surface reconstruction enables open-air fabrication of Sb2S3 solar cells with record efficiency and fill factor

    by Yuqian Huang, Miao Wang, Chen Qian, Wenjuan Wang, Yujing Wu, Shixing Teng, Liang Fang, Bao Lei, Xu Wu, Jinshui Cheng, et al.

    Inert atmospheres suppress oxidation in high-performance Cu(In,Ga)(S,Se)2, Cu2ZnSn(S,Se)4 and Sb2(S,Se)3 solar-cell fabrication, however, they substantially increase processing costs and severely limit the scalability of these technologies. Although ambient annealing has been achieved for Cu(In,Ga)S2 and Cu2ZnSnS4 as-prepared films, the selenization process still needs an inert atmosphere. The low melting point of Sb2S3 makes open-air annealing feasible, yet the annealing temperature of approximately 360 °C inevitably induces severe surface oxidation. Beyond this processing challenge, the performance of Sb2S3 solar cells remains limited by low fill factors (< 64.0%). Here we report an open-air annealing strategy coupled with hydrothermal sulfuration for efficient Sb2S3 solar cells with a record fill factor. A cracked Sb2O3 layer is formed on the Sb2S3 surface during open-air annealing. Subsequent hydrothermal sulfuration, conducted under an air atmosphere, converts Sb2O3 into Sb2S3 and induces nanorod-like protrusion reconstruction at the absorber surface, which reduces the hole-transport barrier and enhances hole extraction. As a result, we achieve a record efficiency of 7.25% for open-air-fabricated Sb2S3 solar cells, with the fill factor exceeding 66.0% for the first time. This work offers a low-cost route for scalable high-performance Sb2S3 solar cells and establishes robust Sb2O3-mediated surface reconstruction to overcome fill-factor losses.

  • Atomically Precise Nanometer‐Sized Pt Catalysts with an Additional Photothermy Functionality

    by Runguo Wang, Dong Chen, Liang Fang, Wentao Fan, Qing You, Guoqing Bian, Yue Zhou, Wanmiao Gu, Chengming Wang, Licheng Bai, et al.

    Atomically precise ~1‐nm Pt nanoparticles (nanoclusters, NCs) with ambient stability are important in fundamental research and exhibit diverse practical applications (catalysis, biomedicine, etc.). However, synthesizing such materials is challenging. Herein, by employing the mixture ligand protecting strategy, we successfully synthesized the largest organic‐ligand‐protected (~1‐nm) Pt23 NCs precisely characterized with mass spectrometry and single‐crystal X‐ray diffraction analyses. Interestingly, natural population analysis and Bader charge calculation indicate an alternate, varying charge ‐layer distribution in the sandwich‐like Pt23 NC kernel. Pt23 NCs can catalyze the oxygen reduction reaction under acidic conditions without requiring calcination and other treatments, and the resulting specific and mass activities without further treatment are sevenfold and eightfold higher than those observed for commercial Pt/C catalysts, respectively. Density functional theory and d‐band center calculations interpret the high activity. Furthermore, Pt23 NCs exhibit a photothermal conversion efficiency of 68.4 % under 532‐nm laser irradiation and can be used at least for six cycles, thus demonstrating great potential for practical applications.


  • Nitrogen doped CoP on ammoniated black phosphorus nanosheets enabling highly efficient hydrogen evolution electrocatalysis

    by Liang Fang, Yanping Xie, Feiya Xu, Miao Wang, Gang Wang

    Developing a rational and cost-effective approach for designing highly-efficient and sustainable electrocatalysts is essential for clean and renewable hydrogen energy. Herein, we report nitrogen-doped CoP on two-dimensional ammoniated black phosphorus (BP) nanosheets (N-CoP/NH2-BP) as novel and highly-active heterostructure electrocatalysts for the hydrogen evolution reaction (HER). Using the reactive defects on the BP nanosheets as the original sites under NH3 gas, N-doped CoP nanocrystals were grown on the surface of the BP nanosheets that were functionalized with NH2 groups at their edge. The N-CoP/NH2-BP heterostructure exhibits low overpotentials of 90 and 246 mV at 10 and 200 mA cm−2, respectively, in an alkaline electrolyte. The excellent HER activity should be attributed to the synergistic effect between N-doped CoP and NH2-functionalized BP, in which NH2-BP, with its high electron mobility and hydrophilicity, accelerates the charge transfer and offers more active sites, moreover, N-doped CoP modulates the electronic structure of CoP for enhanced HER activity. This work not only provides a novel and effective electrocatalyst, but also opens up a straightforward strategy for the design of phosphorene-based electrocatalysts for highly efficient hydrogen evolution and beyond.


  • Large-scale synthesis of polyynes with commercial laser marking technology

    by Liang Fang, Yanping Xie, Shujie Sun, Wei Zi

    The space-confined synthesis method has been an efficient way for the preparation of linear carbon chains. However, the large-scale preparation of linear carbon chains still faces many challenges due to the lack of methods for the large-scale synthesis of precursors, such as short carbon chains (polyynes), and regulation technology for the transport of reactants in one-dimensional space. Here, we report a facile method for the rapid preparation of polyynes in large quantities using a commercial laser marking machine. Spectroscopic characterizations show that a large number of polyynes, such as C8H2, C10H2, C12H2, and C14H2, can be produced by ablating the graphite plate immersed in the organic liquid using a laser marking machine. The results of in situ Raman spectroscopy investigation of C2n H2-filled single-walled carbon nanotubes further confirm that a variety of polyyne molecules are synthesized. Meanwhile, in situ Raman spectroscopy also shows that the local heating treatment can accelerate the filling process of C2n H2 into one-dimensional channels. This work provides new insights into the study of linear carbon chains and space-confined synthesis methods.

  • Open Access

    Synthesis and Stockpile of Polyynes in Paraffin

    by Tao Luo, Liang Fang, Weiwei Chang, Tianxiang Zhu, Yi Liu, Xinluo Zhao

    The polyynes are extremely unstable and reactive, even extremely explosive and dangerous if they have high-purity and high-yield, and their long-term and safe storage is still a challenge. We first used the paraffin as an organic solvent in a submerged DC electric arc for polyyne preparation and found the presence of C8H2 and C10H2 in trapping gas. Then, the polyynes with high-purity and high-yield were placed in solid paraffin at room temperature and successfully extracted after one month. The SERS of polyynes in paraffin at different storing times were measured, and a series of Ag-C bonds of silver alkyne were observed in the SERS of single isolated polyynes separated by HPLC. Furthermore, the polyynes extracted from paraffin were filled into open-ended single-walled carbon nanotubes (SWCNTs), and the long linear carbon chains (LLCCs) were grown inside SWCNTs after heat treatment at 850 °C for 1 hour. Except L band at 1836, the 2L at 3649, 3L at 5427, and 4L band at 7250 cm-1 were observed in the normal Raman spectra. This work not only solves the problem of polyynes storage but also opened new avenues for exploring the exceptional physical properties and various applications of polyynes, LLCCs (carbyne) and LLCCs@SWCNTs.

  • Smallest carbon nanowires made easy: Long linear carbon chains confined inside single-walled carbon nanotubes

    by Weiwei Chang, Fu Liu, Yifan Liu, Tianxiang Zhu, Liang Fang, Qianqian Li, Yi Liu, Xinluo Zhao


  • Purification of polyynes via carbides

    by Liang Fang, Tianxiang Zhu, Weiwei Chang, Yi Liu, Xinluo Zhao


  • In situ formation of highly exposed NiPS 3 nanosheets on nickel foam as an efficient 3D electrocatalyst for overall water splitting

    by Liang Fang, Yanping Xie, Peiyin Guo, Jingpei Zhu, Shuhui Xiao, Shujie Sun, Wei Zi, Hongbin Zhao

    Vertical NiPS 3 nanosheets in situ grown on conducting nickel foam were fabricated by a facile one-step chemical vapor transport method and used as an efficient bifunctional catalyst for overall water splitting.


  • The nanoscale control of disorder-to-order layer-stacking boosts multiferroic responses in an Aurivillius-type layered oxide

    by Shujie Sun, Yuan Li, Xiaofeng Yin, Changhui Liu, Xiaoning Li, Ruixia Ti, Liang Fang, Tianfu Zhang, Ranran Peng, Yalin Lu

    A layer structure with local disorder generated via mixed-layer stacking and slipped Bi 2 O 2 -layer defects can induce novel features and excellent performance.