Sb2O3-mediated surface reconstruction enables open-air fabrication of Sb2S3 solar cells with record efficiency and fill factor

Authors:

Abstract
Inert atmospheres suppress oxidation in high-performance Cu(In,Ga)(S,Se)2, Cu2ZnSn(S,Se)4 and Sb2(S,Se)3 solar-cell fabrication, however, they substantially increase processing costs and severely limit the scalability of these technologies. Although ambient annealing has been achieved for Cu(In,Ga)S2 and Cu2ZnSnS4 as-prepared films, the selenization process still needs an inert atmosphere. The low melting point of Sb2S3 makes open-air annealing feasible, yet the annealing temperature of approximately 360 °C inevitably induces severe surface oxidation. Beyond this processing challenge, the performance of Sb2S3 solar cells remains limited by low fill factors (< 64.0%). Here we report an open-air annealing strategy coupled with hydrothermal sulfuration for efficient Sb2S3 solar cells with a record fill factor. A cracked Sb2O3 layer is formed on the Sb2S3 surface during open-air annealing. Subsequent hydrothermal sulfuration, conducted under an air atmosphere, converts Sb2O3 into Sb2S3 and induces nanorod-like protrusion reconstruction at the absorber surface, which reduces the hole-transport barrier and enhances hole extraction. As a result, we achieve a record efficiency of 7.25% for open-air-fabricated Sb2S3 solar cells, with the fill factor exceeding 66.0% for the first time. This work offers a low-cost route for scalable high-performance Sb2S3 solar cells and establishes robust Sb2O3-mediated surface reconstruction to overcome fill-factor losses.