JJJulien Jarrige

Julien Jarrige

*This is an algorithmically generated author record based on publicly available information.

Julien Jarrige has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optical emission spectroscopy study of electrostatic discharges in vacuum

    by Capucine Sol, Julien Jarrige, Sébastien L G Hess

    Discharges in vacuum such as electrostatic discharges (ESD) occurring on satellite solar array can be assimilated to vacuum cathodic arcs, characterized by strong spatial gradients and high current densities, with currents up to a few amperes and durations of several hundred microseconds. Understanding their properties is essential for plasma physics and for space applications, as these ESDs can induce secondary arcing between adjacent solar cells, seriously deteriorating satellite performance. In this work, the plasma produced by ESDs in vacuum is investigated using optical emission spectroscopy. Emission lines from different species (aluminum and silicon) and ionization stages are analyzed over a range of ESD current from 1 A to 13 A. Excitation and ionization temperatures are derived from Boltzmann and Saha–Boltzmann methods while electron densities are obtained by Stark broadening measurements for both materials. Excitation and ionization temperatures for all species are in agreement over the investigated current range (∼ 1.5 eV) and the linear behavior of both graph types show that the plasma is close to local thermodynamical equilibrium. Despite a significant increase in emission intensity with the ESD current, no clear variation of electron temperature or density is observed. This most likely indicates an expansion of the emitting plasma volume with an increasing discharge current. Comparison with numerical simulations shows improved agreement when accounting for both the effective emitting volume and the contribution of material outgassing.

  • Self-Consistent Dynamic Simulations of the Charge–Discharge Cycles of a Spacecraft in Geostationary Orbit

    by Amandine Finot, Sébastien Hess, Julien Jarrige

    Because of their interaction with the surrounding plasma, spacecraft in operation experience high absolute and differential charging between surfaces made of different materials. Differential charging may ultimately lead to the formation of an electrostatic discharge (ESD) that equalizes the potential of the satellite and the plasma environment and, when triggered on a solar array, generates a plasma bubble that neutralizes, partially or totally, the cover glasses. Charging simulations are commonly used to evaluate the risk of ESD formation on satellites. However, as simulations do not consider the effect of ESDs, computed differential potentials on satellite can reach thousands of volts, while discharges are known to occur at lower values (typically around 500 V). This article presents the coupling between a charging model and a flashover propagation model, applied on a satellite with an 8- $\mathrm {\textbf {m}^{2}}$ solar array. Simulations are presented for several charge–discharge cycles, where the flashover almost completely neutralizes the whole surface of the solar array. A parametric study is carried out to investigate the effect of the ESD ignition voltage, the environment, and the cathode spot material on the ESD occurrence frequency, the ESD duration, and the flashover current amplitude. This type of simulation can be used to further understand parameters strengthening the ESD risks.

  • Experimental Characterization of Plasma Expansion on Solar Arrays and Comparison With Numerical Simulations of Flashover

    by Julien Jarrige, Gaël Murat, Federico Boni, Capucine Sol, Pierre Sarrailh, Sébastien Hess

    This article presents the measurements of electrostatic discharge (ESD) properties on solar arrays and comparisons with results from solar cell charging and electrostatic risk/flashover bubble simulator (SoCCER/FOEBUS) numerical simulation code, which couples a cathode spot model and a plasma expansion model. Several configurations of solar array simulants have been tested to determine the influence of key parameters such as the panel dimensions and the electrode material on the flashover current and the plasma expansion dynamics along the dielectric surface. Electrical measurements of global and local neutralization currents are used to determine ESD duration, flashover charge, and neutralization radius. In parallel, a microwave resonant probe (curling probe) has been used to measure the electron density at various distances from the ESD site and to determine the expansion velocity of the plasma bubble. A good agreement is globally found between experimental results and numerical simulations; the same trends are obtained concerning the influence of the key parameters, and flashover characteristics (duration and charge) are very similar for the largest $120\times 120$ cm array. The electron temperature and the initial plasma density in the cathode spot inferred from curling probe measurements are in line with predictions of the cathode spot model. These results present a global validation of SoCCER/FOEBUS code for the simulation of flashover on solar arrays and offer the possibility to use it for the evaluation of extreme ESDs on large solar arrays considering a worst case scenario.


  • A sheath correction method for electron density measurements with the microwave resonant curling probe

    by Federico Boni, Victor Désangles, Julien Jarrige

    A correction method accounting for plasma sheath effects that appear when performing an electron density measurement with a microwave resonant probe immersed in plasma is described. The diagnostic is the novel curling probe (CP) that has already shown promising capabilities in various plasma sources. The correction method is based on the evaluation of two effects relative to the resonant probe operation and its interface with the plasma. First, the characteristic decay length of the electromagnetic field emitted by the CP, which defines the probed volume, has been characterized for the different harmonic resonance modes. Second, a semi-analytical model has been adapted to describe the plasma structure forming near the probe, which quantitatively describes the electron density profiles across the sheath structure. The correction method is then developed uniquely from numerical simulations and is independent of other diagnostics. Experimental results inside two plasma sources, an inductively coupled plasma and an electron cyclotron resonance plasma thruster, are presented and discussed. The validity of the method is assessed (i) by comparing CP corrected densities with Langmuir probe results, (ii) by varying the probe orientation to the expanding plasma flow, and (iii) by using two harmonics of the probe. The method is shown to significantly improve the accuracy of electron density measurements. Possible improvements to the method are also discussed.


  • Open Access

    Comparison of a hybrid model and experimental measurements for a dielectric-coated coaxial ECR thruster

    by Álvaro Sánchez-Villar, Federico Boni, Victor Désangles, Julien Jarrige, Denis Packan, Eduardo Ahedo, Mario Merino

    Electrostatic probe and thrust balance measurements of a coaxial electron-cyclotron-resonance plasma thruster with magnetic nozzle are compared against numerical simulations of the device that solve self-consistently the plasma transport problem with a hybrid particle-in-cell/fluid approach and the microwave electromagnetic fields using mixed finite elements. A simple phenomenological anomalous transport model similar to those used in Hall thruster modeling is applied. Reasonable average relative errors are reported on the ion current density (8.7%) and plasma density (12.8%) profiles along the plume. Good agreement is found in terms of relative errors on thruster performance parameters as the 90%-current divergence angle (0%–3%), utilization efficiency (3%–10%), peak ion energy (9%–15%), and energy efficiency (2%–17%). The comparison suggests that enhanced cross-field diffusion is present in the plasma. Differences in the experimental and numerical behavior of electron temperature point to the areas of the model that could be improved. These include the electron heat flux closure relation, which must correctly account for the axial electron cooling observed.


  • The curling probe: A numerical and experimental study. Application to the electron density measurements in an ECR plasma thruster

    by Federico Boni, Julien Jarrige, Victor Désangles, Tiberiu Minea

    The measurement of electron density is a key issue in understanding and controlling plasma applications. To date, plasma density in electric thrusters has been mainly evaluated with electrostatic techniques, such as the Langmuir probe, which could be quite invasive. In this paper, we propose the application of a microwave resonant probe, the curling probe, to the diagnostic of an electrodeless plasma thruster. The measurable electron density range and the probe accuracy are found to be limited by the probe natural frequency. We present the numerical study and the experimental characterization of three curling probes with different natural frequencies (700, 1400, and 3000 MHz, approximately). First, an analytical equation of the natural frequency as a function of geometrical parameters is drawn from 2D numerical simulations. Then, a procedure based on solid dielectric etalons is proposed for the absolute calibration of the probe. Finally, measurements are performed in the plume of an electron cyclotron resonance plasma thruster. Electron densities from 108 to 1011 cm−3 have been obtained in agreement with hairpin and Langmuir probes results. A wall-embedded probe has enabled measurements inside the thruster source with minimal plasma perturbation. A possible curling probe configuration, embedded in a reactor wall, is proposed as a fully non-invasive diagnostic for plasma sources.


  • Open Access

    Characterization of diamagnetism inside an ECR thruster with a diamagnetic loop

    by S. Correyero, M. Merino, Paul-Quentin Elias, J. Jarrige, D. Packan, E. Ahedo

    The plasma-induced magnetic field in an electron cyclotron resonance plasma thruster is measured non-intrusively by means of a diamagnetic loop that encloses the plasma flow. The calibration process is described, and parasitic currents in the thruster walls and plasma oscillations are identified as the dominant sources of uncertainty. The integrated magnetic flux is seen to depend on the applied power and less significantly on the mass flow rate. The effect of the diamagnetic loop radius is also studied by testing two loops of different diameters. To estimate the perpendicular electron pressure in the plasma from the loop measurements, two plasma beam models, 1D and 2D, are used. While both models give similar results for the small loop, they differ significantly for the large loop, showing the relevance of 2D effects when a large diamagnetic loop is used.


  • Direct Thrust Measurement of an Electron Cyclotron Resonance Plasma Thruster

    by Théo Vialis, Julien Jarrige, Ane Aanesland, Denis Packan

    Direct thrust measurements of an electron cyclotron resonance plasma thruster are performed with a thrust balance. The thruster performances are deduced, and the influence of power and mass-flow rate is studied. The measured thrust is around 1 mN for 50 W of microwave power input and 0.1  mg/s of xenon, corresponding to 1000 s of specific impulse and 11% of total efficiency. It is found that the thrust is increased by 25% when the walls of the plasma source are covered with a dielectric layer. Comparisons are made between the direct thrust measurements and the indirect thrust measurements obtained with electrostatic probes in the plasma beam.


  • 3D ion velocity distribution function measurement in an electric thruster using laser induced fluorescence tomography

    by P. Q. Elias, J. Jarrige, E. Cucchetti, F. Cannat, D. Packan

    Measuring the full ion velocity distribution function (IVDF) by non-intrusive techniques can improve our understanding of the ionization processes and beam dynamics at work in electric thrusters. In this paper, a Laser-Induced Fluorescence (LIF) tomographic reconstruction technique is applied to the measurement of the IVDF in the plume of a miniature Hall effect thruster. A setup is developed to move the laser axis along two rotation axes around the measurement volume. The fluorescence spectra taken from different viewing angles are combined using a tomographic reconstruction algorithm to build the complete 3D (in phase space) time-averaged distribution function. For the first time, this technique is used in the plume of a miniature Hall effect thruster to measure the full distribution function of the xenon ions. Two examples of reconstructions are provided, in front of the thruster nose-cone and in front of the anode channel. The reconstruction reveals the features of the ion beam, in particular on the thruster axis where a toroidal distribution function is observed. These findings are consistent with the thruster shape and operation. This technique, which can be used with other LIF schemes, could be helpful in revealing the details of the ion production regions and the beam dynamics. Using a more powerful laser source, the current implementation of the technique could be improved to reduce the measurement time and also to reconstruct the temporal evolution of the distribution function.


  • Electron dynamics and ion acceleration in expanding-plasma thrusters

    by T Lafleur, F Cannat, J Jarrige, P Q Elias, D Packan

    In most expanding-plasma thrusters, ion acceleration occurs due to the formation of ambipolar-type electric fields; a process that depends strongly on the electron dynamics of the discharge. The electron properties also determine the heat flux leaving the thruster as well as the maximum ion energy, which are important parameters for the evaluation of thruster performance. Here we perform an experimental and theoretical investigation with both magnetized, and unmagnetized, low-pressure thrusters to explicitly determine the relationship between the ion energy, E i , and the electron temperature, T e 0 . With no magnetic field a relatively constant value of is found for xenon, while when a magnetic nozzle is present, is between about 4–5. These values are shown to be a function of both the magnetic field strength, as well as the electron energy distribution function, which changes significantly depending on the mass flow rate (and hence neutral gas pressure) used in the thruster. The relationship between the ion energy and electron temperature allows estimates to be made for polytropic indices of use in a number of fluid models, as well as estimates of the upper limits to the performance of these types of systems, which for xenon and argon result in maximum specific impulses of about 2500 s and 4500 s respectively.