ASArnon Sakonkanapong

Arnon Sakonkanapong

*This is an algorithmically generated author record based on publicly available information.

Arnon Sakonkanapong has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Broadband Circularly Polarized Microstrip Patch Antenna Using Circular Artificial Ground Structure and Meandering Probe

    by Khanet Pookkapund, Arnon Sakonkanapong, Ryuji Kuse, Chuwong Phongcharoenpanich, Takeshi Fukusako

    To enhance axial ratio (AR) bandwidth, this research proposes a circularly polarized (CP) single-fed microstrip patch antenna using a circular artificial ground structure (AGS) and meandering probe. To achieve broader AR bandwidth, the circular AGS is populated with rectangular unit cells and partially cut unit cells along the circular contour, while the meandering probe is used to improve the impedance bandwidth. Simulations are performed and results compared with that of conventional rectangular-AGS antenna. The simulation results show that the circular-AGS antenna, given 62 mm circular ground plane, achieves broader impedance (5.12 - 9.00 GHz and 54%), AR (5.21 - 8.27 GHz and 45%) and gain bandwidths (3.85 - 7.00 GHz and 58.06%), in comparison with the rectangular-AGS antenna (4.50 - 7.45 GHz and 49%; 4.52 - 7.42 GHz and 21%; and 4.00 - 6.80 GHz and 51.58% for impedance, AR and gain bandwidths). The circular-AGS antenna is capable of converting linear polarization in the off-axial ratio band into circular polarization. To verify, a circular-AGS antenna prototype is fabricated and experiments undertaken. The experimental impedance, AR and gain bandwidths of the circular-AGS antenna are 47.82% (5.17 - 8.42 GHz), 43.81% (5.24 - 8.17 GHz) and 60.74% (3.75 - 7.00 GHz). The proposed circular-AGS antenna can achieve broader AR bandwidth and is thus ideal for broadband CP applications. The novelty of this research lies in the use of circular AGS to effectively enhance AR bandwidth, as opposed to rectangular AGS which is conventionally used in CP polarizers.


  • Open Access

    Near-Field HF-RFID and CMA-Based Circularly Polarized Far-Field UHF-RFID Integrated Tag Antenna

    by Arnon Sakonkanapong, Chuwong Phongcharoenpanich

    This research proposes an integrated high-frequency (HF) and ultrahigh-frequency (UHF) passive radio frequency identification (RFID) tag antenna for near-field (13.56 MHz) and far-field (920–925 MHz) communication. This tag antenna is advantageous for the applications with lossy material in the near-field communication and mitigates polarization loss in the far-field communications. The HF-RFID tag antenna is of square spiral structure, and the circularly polarized UHF-RFID structure consists of a square loop radiator with cascading loop feeding and shorted stub. The structure of HF-RFID tag antenna situated inside the circularly polarized UHF-RFID tag can avoid the significant effect of the near-field magnetic coupling from the square loop. The UHF-RFID tag antenna is realized by using characteristic mode analysis for wideband circular polarization. The HF-RFID structure is conjugate-matched with NXP NT3H2111 chip, and the UHF-RFID structure is conjugate-matched with NXP G2X chip. Simulations were carried out, and an antenna prototype was fabricated. The experimental results reveal that the radiation pattern of UHF-RFID tag antenna is bidirectional with a gain of 0.31 dBic. The impedance bandwidth covers the frequency range of 903–944 MHz, and the axial ratio in boresight direction at 922.5 MHz is 1.67 dB, with the axial ratio bandwidth over 863–938 MHz. The maximum near-field and far-field reading ranges are 4.9 cm and 8.7 m. The proposed integrated dual-band passive tag antenna is operationally ideal for HF-RFID and UHF-RFID applications.


  • Open Access

    Elliptical Ring Antenna Excited by Circular Disc Monopole for UWB Communications

    by Krittaya Nakprasit, Arnon Sakonkanapong, Chuwong Phongcharoenpanich

    This research proposes a compact elliptical ring antenna excited by a circular disc monopole (CDM) for ultra-wideband (UWB) communications. In the study, time- and frequency-domain pulse distortions of the antenna in the transmission mode were characterized by magnitude and phase of the antenna transfer function (Hrad). The results showed that the gain and magnitude of Hrad in the boresight direction are sufficiently flat with linear phase response. The average antenna gain is 3.9 dBi over the UWB spectrum. The antenna also exhibits low pulse distortion with the correlation factors (ρ) of 0.98 and 0.93 for the fifth-order derivative Gaussian pulse and modulated Gaussian pulse with 6 GHz band rejection. The CDM-excited elliptical ring antenna possesses several attractive features, including wide bandwidth, flat gain, compactness, low cost, and low distortion.


  • Wideband UHF Reflector Antenna for DVB Applications

    by Pracha Osklang, Arnon Sakonkanapong, Sitthichai Dentri, Kittima Lertsakwimarn, Bancha Luadang, Chuwong Phongcharoenpanich

    This paper presents the design, measurement, and development of a bow tie wideband antenna using scutcheon shape with inductive-loaded for DVB applications. The antenna consists of 3 elements; a scutcheon bow tie radiator, a line inductive-loaded and a square reflector. The element of bow tie achieves a lower frequency of 470 MHz. The element of line inductive-loaded achieves an upper frequency of 860 MHz for |S11| of less than −10 dB. The measured results of the prototype antenna are good agreement. The impedance bandwidth of 81.27%, which covering a frequency range from 374 MHz to 886 MHz. The measured gains are flat around 7 dBi over the DVB band. The HPBW in the vertical and horizontal planes are 56.8° and 117.3° at frequency of 660 MHz.

  • Open Access

    NFC-Enabled Far-Field Antenna on PET Flexible Substrate for 3G/4G/LTE Mobile Devices

    by Bancha Luadang, Arnon Sakonkanapong, Sitthichai Dentri, Rassamitut Pansomboon, Chuwong Phongcharoenpanich

    This research presents a far-field (FF) antenna with near-field communication (NFC) capability for 3G/4G/LTE mobile devices. The integrated far-and near-field communication (FNFC) antenna was fabricated using conductive silver ink on polyethylene terephthalate (PET) flexible substrate. The FF segment of the antenna is operable in the frequency range of 1.8-2.1 GHz, and the NFC antenna is of dual loop and operable at 13.56 MHz. In the antenna realization, simulations were performed and, to validate, an antenna prototype was fabricated. The experimental results revealed that the FF antenna achieved an impedance bandwidth of 37% (1.52-2.21 GHz), given |S11| of less than -6 dB, with the minimum and maximum efficiency of 92.1% and 98%. The experimental gains are 1.76-2.08 dBi across the target operating frequency band, with near-omnidirectional radiation pattern. The simulation and experimental results are in good agreement. Moreover, the FNFC antenna achieves strong magnetic field distributions in Hx, Hy, and Hz orientations and holds promising potential for 3G/4G/LTE applications.


  • Measurement of Radiated Field From Transmitting Antennas Located in Various Environments

    by Monai Krairiksh, Chainarong Kittiyanpunya, Thunyawat Limpiti, Tanawut Tantisopharak, Prapan Leekul, Paiboon Yoiyod, Bancha Luadang, Arnon Sakonkanapong, Chuwong Phongcharoenpanich


  • Multi-parents genetic algorithm optimization scheme for linear array antenna synthesis

    by Arnon Sakonkanapong, Sarayoot Todnatee, Chuwong Phongcharoenpanich

    This research has proposed the improved iterative generic algorithm (GA) optimization scheme by using multi-parents crossover and adaptation mutation to synthesize the radiation pattern of an aperiodic (nonuniform) linear array antenna. The aim of the iterative optimization is to achieve a radiation pattern with a side lobe level (SLL) less than or equal to -20dB. In the optimization, the proposed scheme iteratively optimizes the array range (spacing) and the number of array elements, whereby the array element with the lowest absolute complex weight coefficient is first removed and then the second lowest and so on. The removal (the element reduction) is terminated once the SLL is greater than -20dB and the elemental increment mechanism is triggered. The results indicate that the proposed iterative GA optimization scheme is applicable to the non-uniform linear array antenna and also is capable of synthesizing the radiation pattern with SLL less than or equal to -20dB.