ABArik Beck

Arik Beck

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Arik Beck has a total of 180 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • High Temperature Stable Pt Nanoclusters Formation in Alumina-Encapsulated Pt Catalysts

    by Gennaro Liccardo, Shyama C. Mandal, Jacob Smith, Tomás Vergara, Arik Beck, Miaofang Chi, Frank Abild-Pedersen, Stacey F. Bent, Matteo Cargnello

    Metal nanoparticle sintering in high-temperature oxidizing atmospheres remains a primary deactivation pathway for platinum-group metal catalysts on alumina supports. Here, atomic layer deposition (ALD) was used to deposit alumina on supported Pt catalysts and develop alumina-encapsulated Pt/Al2O3 catalysts that were aged at 800 °C under different atmospheres and characterized by time-resolved high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), CO-probe diffuse reflectance infrared Fourier transform spectroscopy (CO-DRIFTS), and propene combustion kinetics. Within the alumina-encapsulated system, a sub-2 nm Pt cluster population formed under all oxidizing atmospheres tested but not under inert atmosphere, and this population persisted for at least 12 h at 800 °C under propene complete combustion (PCC) conditions. Unencapsulated Pt/Al2O3 controls, by contrast, developed only a transient sub-2 nm population, detected within 1 min of aging in air at 800 °C and no longer present afterward, consistent with the rapid disappearance of small particles predicted by Ostwald ripening theory. CO-DRIFTS confirmed the presence of undercoordinated Pt surface sites in all oxidatively aged samples, with no detectable signal when the sample was aged under inert atmosphere. Propene combustion rates measured after aging for an alumina-encapsulated catalyst were approximately two and five times higher than the fresh encapsulated catalyst for catalysts aged under inert atmosphere and under oxygen and steam, respectively. DFT calculations of Pt diffusion through defective Al2O3 identified kinetically accessible diffusion pathways at 800 °C, with activation barriers as low as 0.76 eV. Furthermore, Pt surface binding was calculated to be favored in the presence of O2. These results identify oxygen-driven surface segregation, mediated by defect-assisted diffusion through the ALD overcoat, as a possible mechanism responsible for nanocluster formation in this system. The persistence of the sub-2 nm cluster population for at least 12 h at 800 °C under PCC conditions demonstrates the thermal stability of these sites within the encapsulated architecture.

  • Adsorbate Site Hopping—More Facts and Fiction: Driving Forces and Relevance for Heterogeneous Catalysis

    by Jaeha Lee, Arik Beck

    Adsorbate site hopping, defined here as surface-confined migration of adsorbed species or adsorbate equivalents between distinct sites, is a widespread phenomenon in heterogeneous catalysis and includes spillover between different surface phases. Because it enables communication between spatially separated functionalities, site hopping has often been viewed as a route to bifunctional catalytic synergy and, in some cases, to performance beyond constraints imposed by Brønsted–Evans–Polanyi relationships. However, its catalytic value is conditional rather than universal. Downhill migration to a stronger binding site may increase local barriers for subsequent transformation or introduce site-regeneration penalties, while kinetically accessible hopping may remain irrelevant if it does not reduce the energetic span of the catalytic cycle. In addition, apparent rate enhancements assigned to site hopping can arise from other modes of intersite communication, including desorption–readsorption, subsurface or bulk diffusion, ion–electron intersite coupling, catalyst restructuring, or changes in active-site identity. This Perspective develops a thermodynamic and kinetic framework for distinguishing these processes and assessing when site hopping becomes catalytically consequential. We discuss driving forces, hopping barriers, coverage and dynamic surface effects, kinetic signatures, and diagnostic pitfalls, with the aim of clarifying when site hopping can be used as a catalyst design principle.

  • Open Access

    Predicting Catalyst Performance From Pt/CeO 2 Redispersion Kinetics

    by Florian Maurer, Agustin Salcedo, Maria Casapu, David Loffreda, Arik Beck, Paolo Dolcet, Mimoun Aouine, Thierry Epicier, Stephane Loridant, Philippe Vernoux, et al.

    Quantitative description of the structural dynamics of nanoparticles by kinetic data is challenging but would represent a significant knowledge leap, as this would enable the forecast of their properties, e.g., in catalysis. A striking example in catalysis is the redispersion of Pt nanoparticles into single atoms in Pt/CeO 2 ‐based catalysts. In this work, we combined environmental transmission electron microscopy (ETEM) measurements with catalytic data to monitor the individual decay of Pt nanoparticles on defined CeO 2 nanocubes. Supported by density functional theory modeling, this provides unprecedented insight into their dynamic behavior, including kinetics. We observed that the rate of noble metal redispersion is strongly dependent on the local structural environment: the presence of other nearby nanoparticles and heterogeneities on the CeO 2 surface reduced the redispersion rate. Independent of the initial particle size and local environment, the particle volume decreases linearly in time, indicating a constant flux of Pt atoms from the nanoparticles. These findings at the atomic scale were correlated to the observed changes in the integral catalytic performance, allowing a first prediction of the catalyst activity based on the redispersion process and demonstrating how atomic‐scale kinetic insights can be correlated to macroscopic effects.

  • Open Access

    Predicting Catalyst Performance From Pt/CeO 2 Redispersion Kinetics

    by Florian Maurer, Agustin Salcedo, Maria Casapu, David Loffreda, Arik Beck, Paolo Dolcet, Mimoun Aouine, Thierry Epicier, Stephane Loridant, Philippe Vernoux, et al.

    Quantitative description of the structural dynamics of nanoparticles by kinetic data is challenging but would represent a significant knowledge leap, as this would enable the forecast of their properties, e.g., in catalysis. A striking example in catalysis is the redispersion of Pt nanoparticles into single atoms in Pt/CeO 2 ‐based catalysts. In this work, we combined environmental transmission electron microscopy (ETEM) measurements with catalytic data to monitor the individual decay of Pt nanoparticles on defined CeO 2 nanocubes. Supported by density functional theory modeling, this provides unprecedented insight into their dynamic behavior, including kinetics. We observed that the rate of noble metal redispersion is strongly dependent on the local structural environment: the presence of other nearby nanoparticles and heterogeneities on the CeO 2 surface reduced the redispersion rate. Independent of the initial particle size and local environment, the particle volume decreases linearly in time, indicating a constant flux of Pt atoms from the nanoparticles. These findings at the atomic scale were correlated to the observed changes in the integral catalytic performance, allowing a first prediction of the catalyst activity based on the redispersion process and demonstrating how atomic‐scale kinetic insights can be correlated to macroscopic effects.

  • Open Access

    In situ ptychographic nanotomography captures activation, mobility, and deactivation of supported catalysts

    by Arik Beck, Mirko Holler, Tomas Aidukas, Andreas Menzel, Manuel Guizar-Sicairos, Jeroen A. van Bokhoven, Johannes Ihli

    Nanoparticles supported on the surface of porous carrier materials are the dominant form of heterogeneous catalysts today. Yet, they suffer from a common deactivation mechanism: the loss of active surface area under industrial use conditions. Deactivation often stems from the sintering of nanoparticles, a mass-transport process whose mechanism and operating length-scale are a topic of controversy. Investigating this process is challenging, requiring not only a behavioral characterization of thousands of individual particles within the spatial confines of a hierarchically structured support but also a characterization of their ensemble behavior and local support interactions. Here, we introduce in situ ptychographic X-ray computed nanotomography as a tool to facilitate this characterization, allowing a local examination of catalysts in their use-geometry under operational-relevant conditions. Applied to methane oxidation over a palladium-on-silica supported catalyst, we reveal two concurrently operating deactivation drivers, short-range ripening and long-range particle migration, each with different temperature and atmosphere dependencies. The latter enables particles to traverse hundreds of nanometers through the support. These observations expand the current understanding of sintering behavior in supported catalysts and demonstrate PXCT’s capability to resolve restructuring processes within complex porous materials.


  • Distinct Kinetic Signatures of Photodesorption from Metal Nanoparticles

    by Arik Beck, Michael J. Gordon, Phillip Christopher

    Visible photon fluxes can influence the rate and selectivity of heterogeneously catalyzed reactions on metal nanoparticle surfaces. Models describing the influence of photon fluxes have typically introduced photon flux dependent apparent thermal kinetic parameters (reaction orders, activation energies, binding energies, etc.). This has relied on empirical fitting of reaction rate data, making mechanistic interpretations of how photon fluxes influence elementary step rates challenging and inconsistent with fundamental descriptions of photochemistry on metal surfaces developed from surface science studies. Using the CO adsorption-desorption quasi-equilibrium reaction on Pt/Al2O3 catalysts as a model system, we measured steady state adsorbed CO (CO*) coverages under isothermal and isobaric (1 mbar CO) conditions as a function of temperature (473-573 K) and of 440 nm photon flux ((0.1-5.2) × 103 #hv Pt site-1 s-1) using in situ IR spectroscopy. Steady state CO* coverage on Pt was photon flux dependent with increasing photon flux causing decreasing coverage, consistent with photons driving CO* desorption rates faster than thermal CO* desorption rates. However, photon flux dependent CO* coverages were essentially temperature independent, inconsistent with models that describe photon effects using perturbations to apparent thermal kinetic parameters. Instead, 120 steady state CO* coverages as a function of temperature and photon flux are quantitatively described by a kinetic model in which the overall desorption rate is a summation of independent thermal and photon induced CO* desorption rates. Site-resolved analysis reveals distinct kinetic parameters for photon driven desorption of CO* from well-coordinated, under-coordinated, and highly under-coordinated Pt sites, with temperature-dependent apparent quantum efficiencies (AQE) consistent with temperature dependence of vibrational quanta distribution of adsorbed CO. The rigorous kinetic rate laws for independent photon and thermal driven pathways allow for predictive modeling of the influence of photon fluxes on the rates of CO* desorption under catalytic conditions. Further, the analysis provides evidence that steady state continuous wave photon fluxes can drive desorption/adsorption reactions on metal surfaces out of thermal equilibrium, reconciling surface science observations of molecular photodesorption with applied catalysis. The work establishes a general kinetic framework to be considered for photon driven processes on metals, and defines catalyst, reaction, and photon flux characteristic design principles for breaking Sabatier limitations.


  • Open Access

    Grand Challenges and Opportunities in Stimulated Dynamic and Resonant Catalysis

    by Matteo Monai, Wiebke Albrecht, Achim Alkemper, Nongnuch Artrith, Andrea Baldi, Arik Beck, Ryan T. Berry, Ettore Bianco, Floor A. Brzesowsky, Qi Dong, et al.

    Traditional heterogeneous catalysis is constrained by kinetic and thermodynamic limits, such as the Sabatier principle and reaction equilibrium. Dynamic and resonant catalysts hold promise to overcome these limitations by actively oscillating a catalyst’s physical or electronic structure at the time scale of the catalytic cycle, allowing programmable control over reaction pathways, and leading to improved rate and selectivity. External stimuli such as temperature swing, mechanical strain, electric charge, and light can perturb catalyst surfaces in different ways, altering adsorbate coverage, binding energies, and transition states beyond what steady-state catalysis allows. This work surveys the current state of dynamic catalysis, introduces the concept of “stimulando” characterization for observing transient dynamics, and outlines key modeling, mechanistic, and benchmarking strategies to advance the field toward improved chemical transformation.


  • Open Access

    In-Situ Ptychographic Nanotomography Captures Activation, Mobility, and Deactivation of Supported Catalysts

    by Arik Beck, Mirko Holler, Tomas Aidukas, Andreas Menzel, Manuel Guizar-Sicairos, Jeroen A. van Bokhoven, Johannes Ihli

    Nanoparticles supported on the surface of porous carrier materials are the dominant form of heterogeneous catalysts today. Yet, they suffer from a common deactivation mechanism: the loss of active surface area under industrial use conditions. Deactivation often stems from the sintering of nanoparticles, a mass transport process whose mechanism and operating length scale are a topic of controversy. Investigating this process is challenging, requiring not only a behavioural characterisation of thousands of individual particles within the spatial confines of a hierarchically structured support but also a characterisation of their ensemble behaviour and local support interactions. Here, we introduce in-situ ptychographic X-ray computed nanotomography as a tool to facilitate this characterisation, allowing a local examination of catalysts in their use-geometry under operational-relevant conditions. Applied to methane oxidation over a palladium-on-silica supported catalyst, we reveal two concurrently operating deactivation drivers, short-range ripening and long-range particle migration, each with different temperature and atmosphere dependencies. The latter enables particles to traverse hundreds of nanometres through the support. These observations expand the current understanding of sintering behaviour in supported catalysts and demonstrate PXCT’s capability to resolve restructuring processes within complex porous materials.

  • Open Access

    Distinct Kinetic Signatures of Photodesorption from Metal Nanoparticles

    by Arik Beck, Michael Gordon, Phillip Christopher

    Visible photon fluxes can influence the rate and selectivity of heterogeneously catalyzed reactions on metal nanoparticle surfaces. Models describing the influence of photon fluxes have typically introduced photon flux dependent apparent thermal kinetic parameters (reaction orders, activation energies, binding energies, etc.). This has involved empirical fitting of reaction rate data, making mechanistic interpretations of the influence of photon fluxes on elementary step rates challenging, and is inconsistent with fundamental descriptions of photochemistry on metal surfaces developed from surface science studies. Using the CO adsorption-desorption quasi-equilibrium reaction on Pt/Al2O3 catalysts as a model “reaction” system, we measured steady-state adsorbed CO (CO*) coverages under isothermal and isobaric (1 mbar CO) conditions as a function temperature (473 – 573 K) and of 440 nm photon flux (0.1-5.2 x 103 #hv Pt site-1 s-1) using in-situ IR spectroscopy. Steady state CO* coverage on Pt was strongly photon flux dependent with increasing photon flux causing decreasing coverage, consistent with photons driving CO* desorption rates faster than thermal CO* desorption rates. However, photon flux dependent CO* coverages were essentially temperature independent, inconsistent with models that describe photon effects using perturbations to apparent thermal kinetic parameters. Instead, 120 steady state CO* coverages as a function of temperature and photon flux are quantitatively described by a kinetic model in which the overall desorption rate is a summation of independent thermal and photon-induced CO* desorption rates. Site-resolved analysis reveals distinct kinetic parameters for the photon driven desorption of CO* from well-coordinated, under-coordinated, and highly under-coordinated Pt sites, with temperature-dependent apparent quantum efficiencies (AQE) consistent with temperature dependence of vibrational quanta distribution of CO. The rigorous kinetic rate laws for independent photon and thermal driven pathways allows for predictive modeling of operating regimes where photon fluxes can drive enhance reaction rates. This work provides evidence that steady state continuous wave photon fluxes can drive reactions on metal surfaces out of thermal equilibrium, reconciles surface science observations of molecular photodesorption with applied catalysis, establishes a general kinetic framework for photon-driven processes on metals, and defines catalyst, reaction, and photon flux characteristic design principles for breaking Sabatier limitations.