Soner Kizil
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Soner Kizil has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Hayal Bulbul Sonmez
Gebze Technical University
5 shared publications - Sevil Atasoy
Üsküdar Üniversitesi
3 shared publications - İnci Karakaş
Üsküdar Üniversitesi
2 shared publications - Buse Ilgım Yosmaoğlu
Üsküdar University
1 shared publication Gulsah Ozan Aydin
Gebze Institute of Technology, Department of Chemistry, PO. Box 141, 41400 Gebze, Kocaeli, Turkey
1 shared publication- Gülbeyaz Gülşen Güneysu
Üsküdar Üniversitesi
1 shared publication
Latest Publications
- 15 December 2025
- Published by Gumushane University Journal of Science and Technology Institute in Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 15 (4) , 1179-1193
Forensic and analytical profiling of ignitable liquid residues on diverse fabric types
Ignitable liquids (IL)s are crucial evidence in forensic fire investigations to determine the origin and cause of a fire. This study aimed to identify the type of accelerant used by examining the chemical changes in samples obtained from six different textile fabrics (wool, cotton, polyester, polyacrylic, polyamide and acetate) that were unburned, burned without accelerant, and burned with various ignitable liquids (kerosene, synthetic thinner, ethanol, and gasoline), using Fourier Transform Infrared Spectroscopy (FTIR) and Principal Component Analysis (PCA). The analyses determined that each ignitable liquid left distinguishable chemical traces on the fabrics with its unique characteristic FTIR bands. The study reveals that FTIR analyses supported by the PCA method can be considered a supplementary, rapid, and non-destructive technique for ignitable liquid detection in forensic fire investigations, providing additional support to standard Gas Chromatography-Mass Spectrometry (GC-MS) analysis used in routine analyses.
- 15 December 2025
- Published by Gumushane University Journal of Science and Technology Institute in Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 15 (4) , 1179-1193
Forensic and analytical profiling of ignitable liquid residues on diverse fabric types
Ignitable liquids (IL)s are crucial evidence in forensic fire investigations to determine the origin and cause of a fire. This study aimed to identify the type of accelerant used by examining the chemical changes in samples obtained from six different textile fabrics (wool, cotton, polyester, polyacrylic, polyamide and acetate) that were unburned, burned without accelerant, and burned with various ignitable liquids (kerosene, synthetic thinner, ethanol, and gasoline), using Fourier Transform Infrared Spectroscopy (FTIR) and Principal Component Analysis (PCA). The analyses determined that each ignitable liquid left distinguishable chemical traces on the fabrics with its unique characteristic FTIR bands. The study reveals that FTIR analyses supported by the PCA method can be considered a supplementary, rapid, and non-destructive technique for ignitable liquid detection in forensic fire investigations, providing additional support to standard Gas Chromatography-Mass Spectrometry (GC-MS) analysis used in routine analyses.
- Open Access
- 15 March 2025
- Published by Gumushane University Journal of Science and Technology Institute in Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 15 (1) , 184-196
Göz kozmetiği ürünlerinin spektroskopik yöntemlerle adli kanıt olarak incelenmesi
Suç soruşturmaları sırasında elde edilen kozmetik deliller, özellikle kadınlara yönelik fiziksel ve cinsel saldırı davalarında mahkemede birleştirici delil olarak kullanılabilir. Kadın suçluluğunda olay yeri inceleme ekiplerinin olay yerinde göz kalemi kalıntısı bulma oranı yüksektir. Bu delil, şüpheli, mağdur ve suç mahalli arasında bir bağlantı sağlayabilir ve ceza davalarının çözümüne yardımcı olabilir. Bu çalışma, farklı markalardan göz kalemi örneklerinin adli delil olarak incelenmesini kapsamaktadır. Bu amaçla, A4 kâğıdı, peçete, makyaj temizleme pedi ve farklı kumaşlar üzerine sürülen göz kalemi örneklerinin analizi gerçekleştirilmiştir. Ek olarak, çevresel koşulların etkilerini incelemek amacıyla göz kalemi ile lekelenen substratlar içme suyu, deniz suyu ve toprakta bir hafta, iki hafta ve bir aylık sürelerde bekletilerek zamana bağlı değişimleri incelenmiştir. İnceleme sonuçları doğrultusunda, VSC 8000 cihazı ile gerçekleştirilen analizlerde herhangi bir farklılık gözlemlenmemiştir. Stabilite testleri, çevresel faktörlerin numune üzerinde herhangi bir etkisi olmadığını ortaya koymuştur. Ayrıca, farklı substratlar üzerinde yapılan incelemelerde, polyester kumaşta pik gözlenmemiştir. Bu çalışma kapsamında elde edilen bulgular, göz kalemlerinin bileşimsel özellikleri ve çevresel koşullara karşı dayanıklılığının, adli soruşturmalarda güvenilir bir delil olarak kullanılmalarını sağladığını ancak belli kumaş tür veya türlerinde sonuç veremediğini ortaya koymuştur.
- 15 March 2025
- Published by Gumushane University Journal of Science and Technology Institute in Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 15 (1) , 184-196
Open AccessGöz kozmetiği ürünlerinin spektroskopik yöntemlerle adli kanıt olarak incelenmesi
Suç soruşturmaları sırasında elde edilen kozmetik deliller, özellikle kadınlara yönelik fiziksel ve cinsel saldırı davalarında mahkemede birleştirici delil olarak kullanılabilir. Kadın suçluluğunda olay yeri inceleme ekiplerinin olay yerinde göz kalemi kalıntısı bulma oranı yüksektir. Bu delil, şüpheli, mağdur ve suç mahalli arasında bir bağlantı sağlayabilir ve ceza davalarının çözümüne yardımcı olabilir. Bu çalışma, farklı markalardan göz kalemi örneklerinin adli delil olarak incelenmesini kapsamaktadır. Bu amaçla, A4 kâğıdı, peçete, makyaj temizleme pedi ve farklı kumaşlar üzerine sürülen göz kalemi örneklerinin analizi gerçekleştirilmiştir. Ek olarak, çevresel koşulların etkilerini incelemek amacıyla göz kalemi ile lekelenen substratlar içme suyu, deniz suyu ve toprakta bir hafta, iki hafta ve bir aylık sürelerde bekletilerek zamana bağlı değişimleri incelenmiştir. İnceleme sonuçları doğrultusunda, VSC 8000 cihazı ile gerçekleştirilen analizlerde herhangi bir farklılık gözlemlenmemiştir. Stabilite testleri, çevresel faktörlerin numune üzerinde herhangi bir etkisi olmadığını ortaya koymuştur. Ayrıca, farklı substratlar üzerinde yapılan incelemelerde, polyester kumaşta pik gözlenmemiştir. Bu çalışma kapsamında elde edilen bulgular, göz kalemlerinin bileşimsel özellikleri ve çevresel koşullara karşı dayanıklılığının, adli soruşturmalarda güvenilir bir delil olarak kullanılmalarını sağladığını ancak belli kumaş tür veya türlerinde sonuç veremediğini ortaya koymuştur.
- Open Access
- 1 January 2025
- Published by Afyon Kocatepe Universitesi Fen Ve Muhendislik Bilimleri Dergisi in Afyon Kocatepe University Journal of Sciences and Engineering
- Vol. 25 (3) , 576-584
Characterization of Cosmetics Industry Wastewater and Treatment by Coagulation-Flocculation Process
The use of a wide variety of raw materials in the production of cosmetic products and the variability of the process during the production phase significantly affect wastewater characterization. Cosmetic industry wastewater contains low biodegradable components and may contain various pollutants such as ammonia, oil and grease, phosphorus and heavy metals. Heavy metals that can be found in the cosmetics industry cause cancer, neurological diseases, genetic mutations, hair loss and birth defects. In this study, pH, Chemical Oxygen Demand (COD), Total Nitrogen (TN), Total Phosphorus (TP), Suspended Solids (MLSS), Cu, Zn, colour and Orthophosphate (PO4-P) parameters were monitored in Gebze Organised Industrial Zone real cosmetics industry wastewater and their compliance with sewage discharge criteria was investigated. Pollutant removal was investigated by coagulation-flocculation process and removal efficiencies were found as COD: 75%; Cu: 92%; Zn: 94%; Colour: 84%; TN: 99%; TP: 91%; PO4-P: 92%. Different treatment alternatives should be investigated in order to realise the COD removal obtained as a result of the study more effectively. In order to protect the environment and human health, it will be important to increase the studies on the determination and removal of heavy metals by characterising the real cosmetics industry wastewater.
- 1 January 2025
- Published by Afyon Kocatepe Universitesi Fen Ve Muhendislik Bilimleri Dergisi in Afyon Kocatepe University Journal of Sciences and Engineering
- Vol. 25 (3) , 576-584
Open AccessCharacterization of Cosmetics Industry Wastewater and Treatment by Coagulation-Flocculation Process
The use of a wide variety of raw materials in the production of cosmetic products and the variability of the process during the production phase significantly affect wastewater characterization. Cosmetic industry wastewater contains low biodegradable components and may contain various pollutants such as ammonia, oil and grease, phosphorus and heavy metals. Heavy metals that can be found in the cosmetics industry cause cancer, neurological diseases, genetic mutations, hair loss and birth defects. In this study, pH, Chemical Oxygen Demand (COD), Total Nitrogen (TN), Total Phosphorus (TP), Suspended Solids (MLSS), Cu, Zn, colour and Orthophosphate (PO4-P) parameters were monitored in Gebze Organised Industrial Zone real cosmetics industry wastewater and their compliance with sewage discharge criteria was investigated. Pollutant removal was investigated by coagulation-flocculation process and removal efficiencies were found as COD: 75%; Cu: 92%; Zn: 94%; Colour: 84%; TN: 99%; TP: 91%; PO4-P: 92%. Different treatment alternatives should be investigated in order to realise the COD removal obtained as a result of the study more effectively. In order to protect the environment and human health, it will be important to increase the studies on the determination and removal of heavy metals by characterising the real cosmetics industry wastewater.
- Open Access
- 31 August 2024
- Published by Sakarya University Journal of Science in Sakarya University Journal of Science
- Vol. 28 (4) , 794-803
Forensic comparison of Soil Samples in Omerli Dam by FTIR and ICP-OES
Soil is a one of the important physical evidence that could be encountered in any objects including car tire, shoes, or clothes. This study presents the comparison of the soils in Ömerli Dam, Istanbul-Türkiye. 35 of soil samples from 7 different regions have been collected around the lake. FTIR and ICP-OES have been utilized for structural analysis and detection of metal contect in soil samples. Moreover, textural analysis, pH, sedimentation, color tests have been systematically investigated. The image of soil samples is also captured under different light of sources by VSC 8000. The outcome shows that discrimination of soil samples could be studied using various techniques including FTIR, textural analysis, metal concentrations and their color. ICP-OES analysis showed that the soil have various elements such as Si, Fe, Mg, Ca, Cu with a different amounts which provide discrimination for soil samples. The natural pH of the samples varied between 6.1 and 8.3 that are from slightly acidic to moderately alkaline character.
- 31 August 2024
- Published by Sakarya University Journal of Science in Sakarya University Journal of Science
- Vol. 28 (4) , 794-803
Open AccessForensic comparison of Soil Samples in Omerli Dam by FTIR and ICP-OES
Soil is a one of the important physical evidence that could be encountered in any objects including car tire, shoes, or clothes. This study presents the comparison of the soils in Ömerli Dam, Istanbul-Türkiye. 35 of soil samples from 7 different regions have been collected around the lake. FTIR and ICP-OES have been utilized for structural analysis and detection of metal contect in soil samples. Moreover, textural analysis, pH, sedimentation, color tests have been systematically investigated. The image of soil samples is also captured under different light of sources by VSC 8000. The outcome shows that discrimination of soil samples could be studied using various techniques including FTIR, textural analysis, metal concentrations and their color. ICP-OES analysis showed that the soil have various elements such as Si, Fe, Mg, Ca, Cu with a different amounts which provide discrimination for soil samples. The natural pH of the samples varied between 6.1 and 8.3 that are from slightly acidic to moderately alkaline character.
- Open Access
- 28 July 2024
- Published by Turkish Journal of Engineering in Turkish Journal of Engineering
- Vol. 8 (3) , 427-435
A critical study on the treatability of metal plating industry wastewater and real scale adaptation
Water pollution is one of the major problems for humankind. Various pollutants could be detected in wastewater because of human activities such as industrialization, agriculture, domestic waste and etc. Removal of pollutants such as heavy metals, dyes, oils and pesticides are of great importance which affects human life negatively. Many methods have been extensively used to provide “clean water” for environment and human. Heavy metals are important industrial pollutants that need to be quickly removed from wastewater due to their high toxicity and non-biodegradable structure. In this paper, the heavy metals including copper, nickel and zinc have been examined in real wastewater from metal plating industry in Bursa, Türkiye. Concentrations of pollutants (Cu, Ni, Zn, chemical oxygen demand (COD) and SO4) in the effluent as a result of coagulation-flocculation process were determined and their compliance with sewage discharge standards was investigated. Moreover, the removal efficiencies of the pollutants were examined (Cu and Ni: 97-100%; Zn: 82-98%; COD: 32-54%; SO4: 16-23%) and the effect of the coagulant doses used on the operating cost, sludge quantity were also discussed.
- 28 July 2024
- Published by Turkish Journal of Engineering in Turkish Journal of Engineering
- Vol. 8 (3) , 427-435
Open AccessA critical study on the treatability of metal plating industry wastewater and real scale adaptation
Water pollution is one of the major problems for humankind. Various pollutants could be detected in wastewater because of human activities such as industrialization, agriculture, domestic waste and etc. Removal of pollutants such as heavy metals, dyes, oils and pesticides are of great importance which affects human life negatively. Many methods have been extensively used to provide “clean water” for environment and human. Heavy metals are important industrial pollutants that need to be quickly removed from wastewater due to their high toxicity and non-biodegradable structure. In this paper, the heavy metals including copper, nickel and zinc have been examined in real wastewater from metal plating industry in Bursa, Türkiye. Concentrations of pollutants (Cu, Ni, Zn, chemical oxygen demand (COD) and SO4) in the effluent as a result of coagulation-flocculation process were determined and their compliance with sewage discharge standards was investigated. Moreover, the removal efficiencies of the pollutants were examined (Cu and Ni: 97-100%; Zn: 82-98%; COD: 32-54%; SO4: 16-23%) and the effect of the coagulant doses used on the operating cost, sludge quantity were also discussed.
- 6 June 2024
- Published by Wiley in ChemistrySelect
- Vol. 9 (22)
Chemical and Imaging Analysis of Questioned Document Paper by FTIR, ICP and Video Spectral Comparator (VSC) for Forensic Discrimination
Forensic document examination has been considered one of the most important fields in the forensic science. For this, a quick, effective, and cheap techniques for evaluation of forensic evidence is highly required. This study explores the comparison of A4 document paper by chemical and physical analysis. 16 of white A4 paper from different brands were analyzed by FTIR for investigation of structural characteristics. Video Spectral Comparator 8000 has been used to compare the A4 papers under different light source. The inorganic filler composition in the paper is also explored by ICP‐OES. The calcium carbonate content in document papers play a discriminant role which found to be between 16.02 % and 35.54 %. Also, water contact angle has been utilized in order to examine the surface of paper which is generally related to the inorganic filler and other additives. The WCA results ranged between 83° and 111° that enable quick and easy way to compare A4 document papers. The experimental results have demonstrated that besides FTIR methods, other methods such as ICP‐OES for elemental composition, WCA for wetting test, VSC for visualization under different light of source could have been applied for comparison of document papers in case of criminal cases.
- 6 June 2024
- Published by Wiley in ChemistrySelect
- Vol. 9 (22)
Chemical and Imaging Analysis of Questioned Document Paper by FTIR, ICP and Video Spectral Comparator (VSC) for Forensic Discrimination
Forensic document examination has been considered one of the most important fields in the forensic science. For this, a quick, effective, and cheap techniques for evaluation of forensic evidence is highly required. This study explores the comparison of A4 document paper by chemical and physical analysis. 16 of white A4 paper from different brands were analyzed by FTIR for investigation of structural characteristics. Video Spectral Comparator 8000 has been used to compare the A4 papers under different light source. The inorganic filler composition in the paper is also explored by ICP‐OES. The calcium carbonate content in document papers play a discriminant role which found to be between 16.02 % and 35.54 %. Also, water contact angle has been utilized in order to examine the surface of paper which is generally related to the inorganic filler and other additives. The WCA results ranged between 83° and 111° that enable quick and easy way to compare A4 document papers. The experimental results have demonstrated that besides FTIR methods, other methods such as ICP‐OES for elemental composition, WCA for wetting test, VSC for visualization under different light of source could have been applied for comparison of document papers in case of criminal cases.
- Open Access
- 30 April 2024
- Published by Turkish Journal of Engineering in Turkish Journal of Engineering
- Vol. 8 (2) , 353-369
Forensic examination of lipsticks as trace evidence under different environmental conditions
Trace evidence such as fingerprints, biological fluids, fibres, glass, hairs, soils, and cosmetics have been considered most of the important materials on the crime scene, which can be potentially transferred or exchanged between two surfaces when one makes contact to another. Cosmetic products are one of the valuable trace pieces of evidence on crime scene that are generally used for beautification, moisturize, reinforcement of the skin, nutritiveness, and improve the feeling or sensory aspects. In this study, different lip cosmetic products including wax lipstick, liquid lipstick, gloss and lip balm were investigated as forensic evidence. For this, 102 of lip cosmetic samples (20 of lipstick, 14 of lip gloss, 22 of lip balm and 46 of liquid lipstick) were analyzed by using Fourier-transform Infrared spectroscopy (FTIR). The differentiation between lip cosmetic products is detected. The effect of environmental conditions is studied. For this, lip cosmetic products are kept in various water medium such as simulated sea water, tap water, and distilled water in order to track the chemical stability by FTIR. Moreover, they are kept in different time of intervals from 1 day to 1 month to investigate the change over time. Staining of lip products to various substrates including fabric, glass and paper towel have been also explored. The effect of substrate type, lip cosmetic products, time and water sources have been systematically explored by FTIR and video spectral comparator (VSC). All the samples have been examined under different light sources such as visible light, UV-A (365 nm), infrared (695 nm) and spot (fluorescence) to observe the distinctive features of lip cosmetic samples on different substrates. The results have demonstrated that lip products including wax, liquids lipstick, gloss and lip balm have distinguishing character which is observed by FTIR and VSC8000. Moreover, the chemical stability of lip cosmetic products under different water sources could be characteristic tools for differentiating of lip cosmetic products. The outcomes show that cosmetic trace evidence found in water source could be critical evidence in crime scene investigation.
- 30 April 2024
- Published by Turkish Journal of Engineering in Turkish Journal of Engineering
- Vol. 8 (2) , 353-369
Open AccessForensic examination of lipsticks as trace evidence under different environmental conditions
Trace evidence such as fingerprints, biological fluids, fibres, glass, hairs, soils, and cosmetics have been considered most of the important materials on the crime scene, which can be potentially transferred or exchanged between two surfaces when one makes contact to another. Cosmetic products are one of the valuable trace pieces of evidence on crime scene that are generally used for beautification, moisturize, reinforcement of the skin, nutritiveness, and improve the feeling or sensory aspects. In this study, different lip cosmetic products including wax lipstick, liquid lipstick, gloss and lip balm were investigated as forensic evidence. For this, 102 of lip cosmetic samples (20 of lipstick, 14 of lip gloss, 22 of lip balm and 46 of liquid lipstick) were analyzed by using Fourier-transform Infrared spectroscopy (FTIR). The differentiation between lip cosmetic products is detected. The effect of environmental conditions is studied. For this, lip cosmetic products are kept in various water medium such as simulated sea water, tap water, and distilled water in order to track the chemical stability by FTIR. Moreover, they are kept in different time of intervals from 1 day to 1 month to investigate the change over time. Staining of lip products to various substrates including fabric, glass and paper towel have been also explored. The effect of substrate type, lip cosmetic products, time and water sources have been systematically explored by FTIR and video spectral comparator (VSC). All the samples have been examined under different light sources such as visible light, UV-A (365 nm), infrared (695 nm) and spot (fluorescence) to observe the distinctive features of lip cosmetic samples on different substrates. The results have demonstrated that lip products including wax, liquids lipstick, gloss and lip balm have distinguishing character which is observed by FTIR and VSC8000. Moreover, the chemical stability of lip cosmetic products under different water sources could be characteristic tools for differentiating of lip cosmetic products. The outcomes show that cosmetic trace evidence found in water source could be critical evidence in crime scene investigation.
- 31 December 2023
- Published by Echo Academic Publishing in Environmental Research and Technology
- Vol. 6 (4) , 279-287
The evaluation of fibrous disposable facemask for oil sorption and efficient oil/water separation
During the pandemic period, people have used various personal protective equipment including gloves, face mask and face shields. Among them, disposable face mask plays a critical role to control the spread of COVID-19. Hence, there is an urgent need to evaluate and suspend such waste materials from environment. Herein, we have investigated the potential use of disposable face mask as oil sorbent material for efficient oil/water separation due to their hydrophobic/oleophilic characteristics. Some structural characterization techniques are employed to examine the face mask. A number of tests including absorbency, oil/water separation stability in oils and waters, selective removal of oils in different water medium have been systematically investigated. The outcomes show that waste face mask have great potential in the field of oil-water separation that achieve selectively separate the oil from oily wastewater.
- 31 December 2023
- Published by Echo Academic Publishing in Environmental Research and Technology
- Vol. 6 (4) , 279-287
The evaluation of fibrous disposable facemask for oil sorption and efficient oil/water separation
During the pandemic period, people have used various personal protective equipment including gloves, face mask and face shields. Among them, disposable face mask plays a critical role to control the spread of COVID-19. Hence, there is an urgent need to evaluate and suspend such waste materials from environment. Herein, we have investigated the potential use of disposable face mask as oil sorbent material for efficient oil/water separation due to their hydrophobic/oleophilic characteristics. Some structural characterization techniques are employed to examine the face mask. A number of tests including absorbency, oil/water separation stability in oils and waters, selective removal of oils in different water medium have been systematically investigated. The outcomes show that waste face mask have great potential in the field of oil-water separation that achieve selectively separate the oil from oily wastewater.
- 1 May 2020
- Published by Elsevier in Journal of Environmental Management
- Vol. 261, 109911
One-pot fabrication of reusable hybrid sorbents for quick removal of oils from wastewater
- 1 May 2020
- Published by Elsevier in Journal of Environmental Management
- Vol. 261, 109911
One-pot fabrication of reusable hybrid sorbents for quick removal of oils from wastewater
- 17 August 2018
- Published by Springer Nature in Polymer Bulletin
- Vol. 76 (4) , 2081-2096
Star PEG-based amphiphilic polymers: synthesis, characterization and swelling behaviors
- 17 August 2018
- Published by Springer Nature in Polymer Bulletin
- Vol. 76 (4) , 2081-2096
Star PEG-based amphiphilic polymers: synthesis, characterization and swelling behaviors