İKİnci Karakaş

İnci Karakaş

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


İnci Karakaş has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Assessment of Real Confectionery Industry Wastewater: Characterization and Treatability with Coagulation-Flocculation

    by İnci Karakaş

    Although the content of confectionery industry wastewater varies according to the process; it is important to treat it with appropriate methods due to the high organic pollutants it contains. When these wastewaters from the confectionery industry are discharged without pre-treatment, they cause serious environmental problems such as eutrophication. In this study, real confectionery industry wastewater was taken from Gebze Plastics Organised Industrial Zone (Turkiye). Pollutant concentrations were determined by detailed characterisation of the wastewater. Lime (Ca(OH)2), polyaluminium chloride (PAC) and Ammonim Persulfate ((NH4)2S2O8) coagulants were added and chemical oxygen demand (COD), total phosphate (TP), orthophosphates (PO4-P), total nitrogen (TN) and ammonium nitrogen (NH4-N) removal by coagulation-flocculation were investigated. In the study, COD, TP, PO4-P and NH4-N removal efficiencies were ≥86% and TN removal efficiency was 43%. Conformity of confectionery industry wastewater, which causes serious environmental problems such as eutrophication in case of direct discharge to the receiving environment, to the sewage discharge criteria after pretreatment was also investigated.

  • Open Access

    Characterization of Cosmetics Industry Wastewater and Treatment by Coagulation-Flocculation Process

    by İnci Karakaş, Soner Kızıl

    The use of a wide variety of raw materials in the production of cosmetic products and the variability of the process during the production phase significantly affect wastewater characterization. Cosmetic industry wastewater contains low biodegradable components and may contain various pollutants such as ammonia, oil and grease, phosphorus and heavy metals. Heavy metals that can be found in the cosmetics industry cause cancer, neurological diseases, genetic mutations, hair loss and birth defects. In this study, pH, Chemical Oxygen Demand (COD), Total Nitrogen (TN), Total Phosphorus (TP), Suspended Solids (MLSS), Cu, Zn, colour and Orthophosphate (PO4-P) parameters were monitored in Gebze Organised Industrial Zone real cosmetics industry wastewater and their compliance with sewage discharge criteria was investigated. Pollutant removal was investigated by coagulation-flocculation process and removal efficiencies were found as COD: 75%; Cu: 92%; Zn: 94%; Colour: 84%; TN: 99%; TP: 91%; PO4-P: 92%. Different treatment alternatives should be investigated in order to realise the COD removal obtained as a result of the study more effectively. In order to protect the environment and human health, it will be important to increase the studies on the determination and removal of heavy metals by characterising the real cosmetics industry wastewater.


  • Open Access

    A critical study on the treatability of metal plating industry wastewater and real scale adaptation

    by İnci Karakaş, Soner Kızıl

    Water pollution is one of the major problems for humankind. Various pollutants could be detected in wastewater because of human activities such as industrialization, agriculture, domestic waste and etc. Removal of pollutants such as heavy metals, dyes, oils and pesticides are of great importance which affects human life negatively. Many methods have been extensively used to provide “clean water” for environment and human. Heavy metals are important industrial pollutants that need to be quickly removed from wastewater due to their high toxicity and non-biodegradable structure. In this paper, the heavy metals including copper, nickel and zinc have been examined in real wastewater from metal plating industry in Bursa, Türkiye. Concentrations of pollutants (Cu, Ni, Zn, chemical oxygen demand (COD) and SO4) in the effluent as a result of coagulation-flocculation process were determined and their compliance with sewage discharge standards was investigated. Moreover, the removal efficiencies of the pollutants were examined (Cu and Ni: 97-100%; Zn: 82-98%; COD: 32-54%; SO4: 16-23%) and the effect of the coagulant doses used on the operating cost, sludge quantity were also discussed.


  • A Case Study on Istanbul Electronic Waste Firms: ISO 14000 Environmental Management

    by Busra Saglik, Tuğçe YILMAZ KARAN, İnci Karakaş, Rüştü Uçan, Nuri Bi̇ngöl, Mesut Karahan

    Due to the limited natural resources and increasing needs, the activities carried out have negative effects on the environment. This situation has revealed the necessity for controlling environmental effects with legal practices. Consumers now expect businesses operating in the market to meet their increasing needs at the highest level and to respect the environment. The environmental management system has emerged in order to keep the environmental impacts of businesses under control in order to exist in the global market and to ensure the continuity of their existence. With the environmental management system, it aims to reduce the harmful effects of the enterprises to the environment by systematic stages and to eliminate these effects. In this study, a survey was conducted in order to reveal and evaluate the relationship between the factors affecting the transition to the ISO 14000 environmental management system and the improvements achieved. It has been determined that the companies are not obliged to obtain the documents because the audit is not sufficient in obtaining the ISO 14000 certificates, which are required by the laws of the electronic waste recycling companies.

  • MICROPOLLUTANTS IN HOSPITAL WASTEWATER AND TREATMENT IN MEMBRANE BIOREACTORS

    by İnci Karakaş, Yasemin Kaya, İlda Vergi̇li̇, Zeren Beril Özçelep, Gülsüm Yilmaz

    Mikrokirleticiler, biyolojik olarak parçalanabilirliklerinin düşük olması sebebiyle ekosistemde birikme eğilimi göstermekte ve canlı hayatı için toksik, kanserojenik ve mutajenik etkileriyle büyük bir risk oluşturmaktadır. Yaygın olarak içme suları, yüzeysel sular ve yeraltı sularında da nanogram seviyesinde tespit edilen mikrokirleticiler; hastane atıksularında çok yüksek konsantrasyonlarda bulunabilmektedir. Ülkemizde hastane atıksuları doğrudan kanalizasyon sistemine verilerek, evsel atıksularla beraber ön arıtma yapılarak veya biyolojik atıksu arıtma tesisinde arıtıldıktan sonra alıcı ortama verilmektedir. Klasik atıksu arıtma yöntemleriyle atıksulardan giderilemeyen mikrokirleticilerin, ancak ileri atıksu arıtma yöntemleriyle giderimi mümkün olabilmektedir. Bu çalışmada, hastane atıksularındaki mikrokirleticilerin membran biyoreaktörde (MBR) giderimi ve işletme parametrelerinin giderim verimleri üzerine etkisi incelenmiştir.