JGJerzy Girtler

Jerzy Girtler

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jerzy Girtler has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Quantumness in Diagnostics of Marine Internal Combustion Engines and Other Ship Power Plant Machines

    by Jerzy Girtler, Jacek Rudnicki

    The article provides proof that the diagnostics of marine internal combustion engines and other ship power plant machines should take into account the randomness and unpredictability of certain events, such as wear, damage, the variations of mechanical and thermal loads, etc., which take place during machine operation. In the article, the energy E, like the other forms (methods) that it can be converted into (heat and work), is considered the random variable Et; at time t, this variable has the mean value E ¯ t {\bar E_t} , which is the observed value of the statistic E ¯ s t {\bar E_{st}} with an asymptotically normal distribution N ( E ( E t ) , σ t n ) N\left( {E\left( {{E_t}} \right),{{{\sigma _t}} \over {\sqrt n }}} \right) , irrespective of the functional form of the random variable Et. A proof is given that shows that the expected value estimated in the above way, considering the time t of the performance of task Z by a marine internal combustion engine or other ship power plant machine, can be used to determine the machine’s possible action (DM). When compared to the required action (DW) needed for task Z to be performed, this possible action makes it possible to formulate an operating diagnosis concerning whether the engine or machine of concern is able to perform task Z. It is assumed that an energy device of this type is able to perform a given task when the inequality DM≥DW holds. Otherwise, when DM < DW, the device cannot perform the task for which it was adopted in the design and manufacturing phase, which means that it is in the incapability state, although it still can be started and convert energy into the form of heat or work..


  • Open Access

    A Concept of Determining the Relation between Load and Wear of Tribological Systems of Ship Main Selfignition Engines by Using Probabilistic Approach

    by Jerzy Girtler

    This paper presents a proposal of simultaneous consideration of load and wear associated with it , of tribological systems of ship main engines (intended for ship propulsion) . Based on results of investigations it was assumed that both the load Q (i.e. a cause of wear ) and the wear Z (i.e. an effect of load occurrence) considered in a given time t (0 ≤ t ≤ t n ) are random variables Q t and Z t ,respectively. There was characterized operational principle of ship main engines in definite external conditions (WZ) as well as consequences of excessive load of engines. Three hypotheses highlighting relations existing between load and wear of the above mentioned systems, have been proposed. The first of them deals with explanation of stochastic relation between load and wear, the second highlights why it is possible to assume that the load Q t and the wear Z t are positively correlated , and the third - why it is possible to assume that coefficient of correlation between Q t and Z t may be taken close to one.


  • Open Access

    Features of Load and Wear of Main Propulsion Devices on Sea-Going Ships with Piston Combustion Engines and Their Impact on Changes in Technical States of the Systems

    by Jerzy Girtler

    The paper presents the specificity of operation of propulsion systems of seagoing ships which causes the need to control the load on them, especially on their engines called main engines. The characteristics of the load on the propulsion systems, especially on the main engines as well as on the shaft lines and propellers driven by the engines, along with the process of wear in tribological joints (sliding tribological systems) of the machines have been described herein. Using examples of typical types of wear (both linear and volumetric) for the tribological systems of this sort, interpretation of states of their wear has been provided with regards to the wear levels defined as acceptable, unacceptable and catastrophic. The following hypotheses have been formulated: 1) hypothesis explaining necessity to consider the loads on the systems under operation as stochastic processes; 2) hypothesis explaining a possibility of considering the processes as stationary; and 3) hypothesis explaining why it can be assumed that a given technical state of any tribological system can be considered as dependent only on the directly preceding state and stochastically independent of the states that existed earlier. Accepting the hypotheses as true, a four-state continuous-time semi-Markov process has been proposed in the form of a model of changes in condition of a propulsion system (PS) of any ship. The model includes the most significant states affecting safety of a ship at sea, such as: s0 - PS ability state, s1 - PS disability state due to damage to the main engine (ME), s2 - PS disability state due to damage to the shaft line (SL) and s3 - PS disability state due to damage to the propeller (P). Probability of occurrence (changes) of the states has also been demonstrated.


  • Open Access

    Analysis of Catalitic Reactors Usefulness to Reduce Pollution Generated by Piston Combustion Engines with Regard to Ship Main Engines

    by Edyta Zielińska, Jerzy Girtler, Kazimierz Lejda

    The article presents results which indicate that the use of catalytic reactors to reduce emissions of harmful compunds contained in the exhaust gas is important in the operation of vehicle motors operation. Efforts of the shipbuilding industry to reduce the toxicity of exhaust gas emitted by the main engines have been indicated and pointed to the desirability of the use of these catalysts in maritime transport. It has been pointed out that studies of the harmful substances in exhaust gases performer at vehicle inspection stations have an impact on increasing the safety of drivers and other road users and contribute to preserving the natural environment by reducing the danger coming from cars operating on Polish roads. An opinion has been expressed that the most serious threats to the environment are emitted by car transport exhaust fumes, which are characterized by significant emission of toxic compounds excreted into the atmosphere from tailpipe emissions. It has been demonstrated that a fully functioning catalytic reactor, operating in a steady state at appropriate temperatures and the composition of the mixture close to stoichiometric ratio, can reduce emissions of carbon monoxide, hydrocarbons and nitrogen oxides by more than 90%. Also, an assessment has been presented reporting the efficiency of catalytic reactors of spark ignition engines operating in a test vehicle inspection station. The results of research in the evaluation of their performance were correlated with their operation waveforms. Such an approach is justified by the fact that during the operation of each vehicle the wear of its assemblies and components is different - including the catalytic reactor. The catalytic layer undergoes aging so that there are changes in the structure and chemical composition of the catalyst bed, while the overlapping of layers of different chemical compounds that block access to the active layer of the reactor. An opinion has also been expressed that it would be advisable to take steps to use research results presented in this article for research of catalytic reactors similar use in diagnostic systems of marine combustion engines, especially the main ones, which exhaust emissions are incomparably greater than in the case of car engines.


  • Open Access

    Operation Evaluation Method for Marine Turbine Combustion Engines in Terms of Energetics

    by Marek Dzida, Jerzy Girtler

    An evaluation proposal (quantitative determination) of any combustion turbine engine operation has been presented, wherein the impact energy occurs at a given time due to Energy conversion. The fact has been taken into account that in this type of internal combustion engines the energy conversion occurs first in the combustion chambers and in the spaces between the blade of the turbine engine. It was assumed that in the combustion chambers occurs a conversion of chemical energy contained in the fuel-air mixture to the internal energy of the produced exhaust gases. This form of energy conversion has been called heat. It was also assumed that in the spaces between the blades of the rotor turbine, a replacement occurs of part of the internal energy of the exhaust gas, which is their thermal energy into kinetic energy conversion of its rotation. This form of energy conversion has been called the work. Operation of the combustion engine has been thus interpreted as a transmission of power receivers in a predetermined time when there the processing and transfer in the form (means) of work and heat occurs. Valuing the operation of this type of internal combustion engines, proposed by the authors of this article, is to determine their operation using physical size, which has a numerical value and a unit of measurement called joule-second [joule x second]. Operation of the combustion turbine engine resulting in the performance of the turbine rotor work has been presented, taking into account the fact that the impeller shaft is connected to the receiver, which may be a generator (in the case of one-shaft engine) or a propeller of the ship (in the case of two or three shaft engine).


  • Open Access

    A Model of Fuel Combustion Process in The Marine Reciprocating Engine Work Space Taking Into Account Load and Wear of Crankshaft-Piston Assembly and The Theory of Semi-Markov Processes

    by Jerzy Girtler

    The article analyses the operation of reciprocal internal combustion engines, with marine engines used as an example. The analysis takes into account types of energy conversion in the work spaces (cylinders) of these engines, loads of their crankshaft-piston assemblies, and types of fuel combustion which can take place in these spaces during engine operation. It is highlighted that the analysed time-dependent loads of marine internal combustion engine crankshaft-piston assemblies are random processes. It is also indicated that the wear of elements of those assemblies resulting from their load should also be considered a random process. A hypothesis is formulated which explains random nature of load and the absence of the theoretically expected detonation combustion in engines supplied with such fuels as Diesel Oil, Marine Diesel Oil, and Heavy Fuel Oil. A model is proposed for fuel combustion in an arbitrary work space of a marine Diesel engine, which has the form of a stochastic four-state process, discrete in states and continuous in time. The model is based on the theory of semi-Markov processes


  • Open Access

    The semi-Markov model of the process of appearance of sea-going ship propupsion system ability and inability states in application to determining the reliablity of these systems

    by Jerzy Girtler

    The article presents possible application of the theory of semi-Markov processes in creating the eight-state model of the process of appearance of the propulsion systems ability and inability states on sea-going vessels performing transportation tasks in a relatively long operating time t (t → ∞). The model has been proved to be able to be successfully used for determining the reliability of the abovementioned systems. The probability of faultless operation in time t was assumed the measure of system reliability. Operating situations of sea-going vessels were characterised, with special attention being paid to the fact that the loads of propulsion system components of these vessels are of random nature. These loads lead to damages which for this reason were also considered random events. It was also assumed that the damages provoke the appearance of states of inability of particular ship propulsion system components which means that these states are random events as well. The states of ability of a given ship propulsion system have been assumed to exist when all components of this system are in the state of ability. In case when at least one component is in the state of inability, the entire system is in the state of inability. Conditions were formulated for the reliability model of an arbitrary system to be able to be worked out in the form of the semi-Markov process. The need for the use of technical diagnostics in reliability examination of sea-going ship propulsion systems was indicated. In conclusions, certain qualities of the article were highlighted which are, in author’s opinion, of highest importance in reliability examination of sea-going ship propulsion systems.


  • Open Access

    Application of theory of semi-Markov processes to determining distribution of probabilistic process of marine accidents resulting from collision of ships

    by Jerzy Girtler

    In this paper is presented possible application of the theory of semi-Markov processes to elaborating an eight-state model of the process of occurrence of serviceability state and unserviceability states of sea-going ships making critical manoeuvres during their entering and leaving the ports. In the analysis it was taken into account that sea-going ships are in service for a very long time t (t → ∞). The model was elaborated to determine the probability (P0) of correct execution of critical manoeuvres during ship’s entering and leaving the port as well as the probabilities Pj(j = 1, 2, 3, …, 7) of incorrect execution of critical manoeuvres by a ship, that leads to marine accidents. It was assumed that such accidents result from: ship’s grounding on port approaching fairway, collision with a ship on port approching fairway, collision with a pierhead during passing through port entrance, collision with a hydrotechnical structure during ship’s passing through port channels, collision with a port quay during coming alongside it and collision with a ship already moored to the quay. The probability (P0) was assumed a measure of safe execution of a critical manoeuvre. The probability characterizes possibility of avoiding any collision during ship’s entering and leaving the port. The probability Pa = 1 - P0 was assumed a measure of occurrence of a collsion and - consequently - marine accident. The probability Pa was interpreted as a sum of the probabilities Pj(j = 1, 2, 3, …, 7) of occurrence of all the selected events. In summing up the paper, attention was drawn to its merits which - in opinion of this author - are crucial for research on real process of accidents during entering the port and leaving it by sea-going ship in difficult navigation conditions.


  • Possibility of Application of the Theory of Semi-Markov Processes to Determine Reliability of Diagnosing Systems / MOŻLIWOŚĆ ZASTOSOWANIA TEORII PROCESÓW SEMI-MARKOWA DO OKREŚLENIA NIEZAWODNOŚCI SYSTEMÓW DIAGNOZUJĄCYCH

    by Jerzy Girtler

    The paper provides justification for the necessity to define reliability of diagnosing systems (SDG) in order to develop a diagnosis on state of any technical mechanism being a diagnosed system (SDN). It has been shown that the knowledge of SDG reliability enables defining diagnosis reliability. It has been assumed that the diagnosis reliability can be defined as a diagnosis property which specifies the degree of recognizing by a diagnosing system (SDG) the actual state of the diagnosed system (SDN) which may be any mechanism, and the conditional probability p(S*/K*) of occurrence (existence) of state S* of the mechanism (SDN) as a diagnosis measure provided that at a specified reliability of SDG, the vector K* of values of diagnostic parameters implied by the state, is observed. The probability that SDG is in the state of ability during diagnostic tests and the following diagnostic inferences leading to development of a diagnosis about the SDN state, has been accepted as a measure of SDG reliability. The theory of semi-Markov processes has been used for defining the SDG reliability, that enabled to develop a SDG reliability model in the form of a seven-state (continuous-time discrete-state) semi-Markov process of changes of SDG states.