Marek Dzida
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Marek Dzida has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Serhiy Ivanovich Serbin
Admiral Makarov National University of Shipbuilding , Mykolaiv , Ukraine
8 shared publications - Zygfryd Domachowski
Gdansk University of Technology, Gdansk, Poland
5 shared publications - Bohdan M. Lychko
Admiral Makarov National University of Shipbuilding , Mykolaiv , Ukraine
2 shared publications Daifen Chen
Jiangsu University of Science and Technology , Zhenjiang , China
2 shared publications- Anatoliy Shevtsov
Admiral Makarov National University of Shipbuilding, Mykolaiv
1 shared publication - Badri Diasamidze
Admiral Makarov National University of Shipbuilding , Ukraine
1 shared publication
Latest Publications
- Open Access
- 1 September 2026
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 33 (3) , 91-100
Operational Behaviour of a Gas Turbine Combustion Chamber Using Hydrogen–Ammonia Fuel
This article describes a study of a tubular–annular combustion chamber in a 25 MW gas turbine operating on a hydrogen–ammonia mixture, with the aim of determining its energy and environmental characteristics. A novel approach was developed for modelling the combustion processes of this mixture under conditions where the gaseous fuel was premixed with an oxidiser in the channels of radial–axial swirlers within flame tubes. A detailed kinetic scheme for mixture combustion within the eddy dissipation concept framework was used in three-dimensional calculations of the combustion chamber. It was found that the range of stable operation, without the formation of a flame flashback zone in the radial–axial swirler channels, was defined by an ammonia content exceeding 50% (by volume) in the mixture. The main features of the working process in the combustion chamber with different compositions of the hydrogen–ammonia mixture were analysed. The results will be useful for the design of advanced gas turbine engine combustion chambers as part of decarbonised energy systems.
- 1 September 2026
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 33 (3) , 91-100
Open AccessOperational Behaviour of a Gas Turbine Combustion Chamber Using Hydrogen–Ammonia Fuel
This article describes a study of a tubular–annular combustion chamber in a 25 MW gas turbine operating on a hydrogen–ammonia mixture, with the aim of determining its energy and environmental characteristics. A novel approach was developed for modelling the combustion processes of this mixture under conditions where the gaseous fuel was premixed with an oxidiser in the channels of radial–axial swirlers within flame tubes. A detailed kinetic scheme for mixture combustion within the eddy dissipation concept framework was used in three-dimensional calculations of the combustion chamber. It was found that the range of stable operation, without the formation of a flame flashback zone in the radial–axial swirler channels, was defined by an ammonia content exceeding 50% (by volume) in the mixture. The main features of the working process in the combustion chamber with different compositions of the hydrogen–ammonia mixture were analysed. The results will be useful for the design of advanced gas turbine engine combustion chambers as part of decarbonised energy systems.
- Open Access
- 21 February 2026
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 33 (1) , 120-127
Three-Dimensional Analysis of a Steam-Injected Gas Turbine Combustor Fuelled by an Ammonia-Hydrogen Blend
This work presents a 3D numerical study of a steam-injected combustor for a gas turbine operating on an ammonia-hydrogen fuel blend, aimed at enabling carbon-free hybrid energy systems. The research focuses on the performance and emission characteristics of a 32 MW engine’s combustor. Using Computational Fluid Dynamics (CFD) with a detailed chemical kinetics mechanism (203 reactions, 31 species), the model solves the governing equations for turbulent reacting flow. The simulations provide new insights into ammonia-hydrogen flame propagation within intensely swirled flows under staged air and steam admission. Key energy and environmental parameters for the combustor are obtained. The results support the design of advanced combustors for decarbonised gas turbine systems.
- 21 February 2026
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 33 (1) , 120-127
Open AccessThree-Dimensional Analysis of a Steam-Injected Gas Turbine Combustor Fuelled by an Ammonia-Hydrogen Blend
This work presents a 3D numerical study of a steam-injected combustor for a gas turbine operating on an ammonia-hydrogen fuel blend, aimed at enabling carbon-free hybrid energy systems. The research focuses on the performance and emission characteristics of a 32 MW engine’s combustor. Using Computational Fluid Dynamics (CFD) with a detailed chemical kinetics mechanism (203 reactions, 31 species), the model solves the governing equations for turbulent reacting flow. The simulations provide new insights into ammonia-hydrogen flame propagation within intensely swirled flows under staged air and steam admission. Key energy and environmental parameters for the combustor are obtained. The results support the design of advanced combustors for decarbonised gas turbine systems.
- Open Access
- 18 November 2025
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 32 (4) , 78-86
Evaluation of the Thermal Condition of Marine Gas Turbine Components via Telemetric Measurements
This paper focuses on assessing the thermal state of a marine gas turbine plant (MGTP), with particular attention being given to the measurement of turbine rotor component temperatures using a specially developed telemetric measurement system (TMS). The study was conducted within the framework of research aimed at evaluating the effects of reduced relative air temperature, which is supplied by the high-pressure compressor (HPC) through nozzle guide vanes (NGV) and a twisting grid (TG) inside the rotor blades (RB) of a high-pressure turbine (HPT), on the thermal state of the HPT rotor. This temperature reduction is achieved via a pre-swirl technique, in which the cooling air is directed toward rotor rotation. The results obtained demonstrate new opportunities for monitoring the thermal condition of turbine components during the modernisation of MGTPs. This approach contributes to improving the overall efficiency of the system by enabling an increase in the gas flow temperature at the inlet to the HPT’s first stage.
- 18 November 2025
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 32 (4) , 78-86
Open AccessEvaluation of the Thermal Condition of Marine Gas Turbine Components via Telemetric Measurements
This paper focuses on assessing the thermal state of a marine gas turbine plant (MGTP), with particular attention being given to the measurement of turbine rotor component temperatures using a specially developed telemetric measurement system (TMS). The study was conducted within the framework of research aimed at evaluating the effects of reduced relative air temperature, which is supplied by the high-pressure compressor (HPC) through nozzle guide vanes (NGV) and a twisting grid (TG) inside the rotor blades (RB) of a high-pressure turbine (HPT), on the thermal state of the HPT rotor. This temperature reduction is achieved via a pre-swirl technique, in which the cooling air is directed toward rotor rotation. The results obtained demonstrate new opportunities for monitoring the thermal condition of turbine components during the modernisation of MGTPs. This approach contributes to improving the overall efficiency of the system by enabling an increase in the gas flow temperature at the inlet to the HPT’s first stage.
- Open Access
- 1 June 2025
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 32 (2) , 84-93
Experimental Study of a Phase-Change Thermoacoustic Engine for Maritime Waste Heat Recovery System
Efforts to lower the temperature of waste heat from engines in industry, transportation, and power generation have gained significant attention. Due to the low exergy potential of such emissions, utilising these low-temperature heat sources with conventional engines remains a challenge. Improving existing technologies or developing new solutions is critical. For example, in modern marine 2-stroke and 4-stroke engines, cooling coolant temperatures range from 353–365 K, while liquid heat emissions to the environment typically do not exceed 320 K. Thermoacoustic technologies offer a promising approach. Thermoacoustic engines (TAEs) can harness low-temperature (LT) external heat sources to generate mechanical work. Interestingly, thermoacoustic oscillations have been observed with small temperature differences between heat sources, particularly in humid environments. This phenomenon could enable the development of LT energy-saving systems using TAEs in a two-phase working medium. However, applying thermoacoustic systems in maritime settings requires further research, particularly to improve the specific power of TAEs. This paper presents experimental results on TAEs operating with a wet working medium. Experiments have shown that in a TAE with a ‘wet’ medium based on air and water, thermoacoustic oscillations arise at 355–359 K with a temperature gradient in the matrix of 1.19–1.30 K/mm, leading to a 1.7–7-fold increase in the TAE’s acoustic power. It was also found that, under the research conditions, the droplet condensation of water vapour can occur in the ceramic matrix and on the surfaces of the TAE heat exchangers, potentially affecting the overall efficiency of energy conversion processes.
- 1 June 2025
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 32 (2) , 84-93
Open AccessExperimental Study of a Phase-Change Thermoacoustic Engine for Maritime Waste Heat Recovery System
Efforts to lower the temperature of waste heat from engines in industry, transportation, and power generation have gained significant attention. Due to the low exergy potential of such emissions, utilising these low-temperature heat sources with conventional engines remains a challenge. Improving existing technologies or developing new solutions is critical. For example, in modern marine 2-stroke and 4-stroke engines, cooling coolant temperatures range from 353–365 K, while liquid heat emissions to the environment typically do not exceed 320 K. Thermoacoustic technologies offer a promising approach. Thermoacoustic engines (TAEs) can harness low-temperature (LT) external heat sources to generate mechanical work. Interestingly, thermoacoustic oscillations have been observed with small temperature differences between heat sources, particularly in humid environments. This phenomenon could enable the development of LT energy-saving systems using TAEs in a two-phase working medium. However, applying thermoacoustic systems in maritime settings requires further research, particularly to improve the specific power of TAEs. This paper presents experimental results on TAEs operating with a wet working medium. Experiments have shown that in a TAE with a ‘wet’ medium based on air and water, thermoacoustic oscillations arise at 355–359 K with a temperature gradient in the matrix of 1.19–1.30 K/mm, leading to a 1.7–7-fold increase in the TAE’s acoustic power. It was also found that, under the research conditions, the droplet condensation of water vapour can occur in the ceramic matrix and on the surfaces of the TAE heat exchangers, potentially affecting the overall efficiency of energy conversion processes.
- Open Access
- 1 June 2023
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 30 (2) , 146-164
Understanding Fuel Saving and Clean Fuel Strategies Towards Green Maritime
Due to recent emission-associated regulations imposed on marine fuel, ship owners have been forced to seek alternate fuels, in order to meet the new limits. The aim of achieving low-carbon shipping by the year 2050, has meant that alternative marine fuels, as well as various technological and operational initiatives, need to be taken into account. This article evaluates and examines recent clean fuels and novel clean technologies for vessels. The alternative fuels are classified as low-carbon fuels, carbon-free fuels, and carbon neutral fuels, based on their properties. Fuel properties, the status of technological development, and existing challenges are also summarised in this paper. Furthermore, researchers have also investigated energy-saving devices and discovered that zero-carbon and virtually zero-carbon clean fuels, together with clean production, might play an important part in shipping, despite the commercial impracticability of existing costs and infrastructure. More interestingly, the transition to marine fuel is known to be a lengthy process; thus, early consensus-building, as well as action-adoption, in the maritime community is critical for meeting the expectations and aims of sustainable marine transportation.
- 1 June 2023
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 30 (2) , 146-164
Open AccessUnderstanding Fuel Saving and Clean Fuel Strategies Towards Green Maritime
Due to recent emission-associated regulations imposed on marine fuel, ship owners have been forced to seek alternate fuels, in order to meet the new limits. The aim of achieving low-carbon shipping by the year 2050, has meant that alternative marine fuels, as well as various technological and operational initiatives, need to be taken into account. This article evaluates and examines recent clean fuels and novel clean technologies for vessels. The alternative fuels are classified as low-carbon fuels, carbon-free fuels, and carbon neutral fuels, based on their properties. Fuel properties, the status of technological development, and existing challenges are also summarised in this paper. Furthermore, researchers have also investigated energy-saving devices and discovered that zero-carbon and virtually zero-carbon clean fuels, together with clean production, might play an important part in shipping, despite the commercial impracticability of existing costs and infrastructure. More interestingly, the transition to marine fuel is known to be a lengthy process; thus, early consensus-building, as well as action-adoption, in the maritime community is critical for meeting the expectations and aims of sustainable marine transportation.
- Open Access
- 1 June 2023
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 30 (2) , 68-75
Investigation of the Efficiency of a Dual-Fuel Gas Turbine Combustion Chamber with a Plasma‒Chemical Element
The study is devoted to the possibility of increasing the efficiency of the working process in dual-fuel combustion chambers of gas turbine engines for FPSO vessels. For the first time, it is proposed to use the advantages of plasma‒chemical intensification of the combustion of hydrocarbon fuels in the dual-fuel combustion chambers, which can simultaneously operate on gaseous and liquid fuels. A design scheme of a combustion chamber with a plasma‒chemical element is proposed. A continuous type mathematical model of a combustion chamber with a plasma‒chemical element has been developed, which is based on the solution of a system of differential equations describing the processes of chemical reactions in a turbulent system, taking into consideration the initiating effect of the products of plasma‒chemical reactions on the processes of flame propagation. A modified six-stage kinetic scheme of hydrocarbon oxidation was used to simultaneously predict the combustion characteristics of the gaseous and liquid fuels, taking into account the decrease in the activation energy of carbon monoxide oxidation reactions when the products of the plasma‒chemical element are added. The results reveal that the addition of plasma‒chemical products significantly reduces CO emissions in the outlet section of the flame tube (from 25‒28 ppm to 3.9‒4.6 ppm), while the emission of nitrogen oxides remains practically unchanged for the studied combustion chamber. Further research directions are proposed to enhance the working process efficiency of a dual-fuel combustion chamber for gas turbine engines as part of the power plant of FSPO vessels.
- 1 June 2023
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 30 (2) , 68-75
Open AccessInvestigation of the Efficiency of a Dual-Fuel Gas Turbine Combustion Chamber with a Plasma‒Chemical Element
The study is devoted to the possibility of increasing the efficiency of the working process in dual-fuel combustion chambers of gas turbine engines for FPSO vessels. For the first time, it is proposed to use the advantages of plasma‒chemical intensification of the combustion of hydrocarbon fuels in the dual-fuel combustion chambers, which can simultaneously operate on gaseous and liquid fuels. A design scheme of a combustion chamber with a plasma‒chemical element is proposed. A continuous type mathematical model of a combustion chamber with a plasma‒chemical element has been developed, which is based on the solution of a system of differential equations describing the processes of chemical reactions in a turbulent system, taking into consideration the initiating effect of the products of plasma‒chemical reactions on the processes of flame propagation. A modified six-stage kinetic scheme of hydrocarbon oxidation was used to simultaneously predict the combustion characteristics of the gaseous and liquid fuels, taking into account the decrease in the activation energy of carbon monoxide oxidation reactions when the products of the plasma‒chemical element are added. The results reveal that the addition of plasma‒chemical products significantly reduces CO emissions in the outlet section of the flame tube (from 25‒28 ppm to 3.9‒4.6 ppm), while the emission of nitrogen oxides remains practically unchanged for the studied combustion chamber. Further research directions are proposed to enhance the working process efficiency of a dual-fuel combustion chamber for gas turbine engines as part of the power plant of FSPO vessels.
- Open Access
- 4 February 2021
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 17 (4) , 866-876
Application analysis of a hybrid solid oxide fuel cell-gas turbine system for marine power plants
The results of theoretical studies of the possibilities of using hybrid solid oxide fuel cell–gas turbine (SOFC-GT) systems for marine power plants are presented. A 500 kW auxiliary marine power plant scheme using stacks of SOFCs in combination with a regenerative gas turbine operating with over-expansion based on our recent patent application is proposed. The results of mathematical modelling showed the opportunity to obtain a hybrid scheme efficiency of about 55% with the optimal values of the gas turbine compression ratio 2.0–2.2 and the exhauster compressor ratio 1.3–1.4. The application of the considered hybrid SOFC-GT system gives an increase in electrical efficiency by 19% in comparison with a cycle without a gas turbine. The aerodynamic structure of chemically reacting flows in a combustor is determined, as well as the features of the formation of toxic components during the combustion of SOFC off-gas with very low heating value.
- 4 February 2021
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 17 (4) , 866-876
Open AccessApplication analysis of a hybrid solid oxide fuel cell-gas turbine system for marine power plants
The results of theoretical studies of the possibilities of using hybrid solid oxide fuel cell–gas turbine (SOFC-GT) systems for marine power plants are presented. A 500 kW auxiliary marine power plant scheme using stacks of SOFCs in combination with a regenerative gas turbine operating with over-expansion based on our recent patent application is proposed. The results of mathematical modelling showed the opportunity to obtain a hybrid scheme efficiency of about 55% with the optimal values of the gas turbine compression ratio 2.0–2.2 and the exhauster compressor ratio 1.3–1.4. The application of the considered hybrid SOFC-GT system gives an increase in electrical efficiency by 19% in comparison with a cycle without a gas turbine. The aerodynamic structure of chemically reacting flows in a combustor is determined, as well as the features of the formation of toxic components during the combustion of SOFC off-gas with very low heating value.
- Open Access
- 1 September 2020
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 27 (3) , 89-99
Investigations of the Working Process in a Dual-Fuel Low-Emission Combustion Chamber for an FPSO Gas Turbine Engine
This investigation is devoted to an analysis of the working process in a dual-fuel low-emission combustion chamber for a floating vessel’s gas turbine. The low-emission gas turbine combustion chamber with partial pre-mixing of fuel and air inside the outer and inner radial-axial swirlers was chosen as the object of research. When modelling processes in a dual-flow low-emission gas turbine combustion chamber, a generalized method is used, based on the numerical solution of the system of conservation and transport equations for a multi-component chemically reactive turbulent system, taking into consideration nitrogen oxides formation. The Eddy-Dissipation-Concept model, which incorporates Arrhenius chemical kinetics in a turbulent flame, and the Discrete Phase Model describing the interfacial interaction are used in the investigation. The obtained results confirmed the possibility of organizing efficient combustion of distillate liquid fuel in a low-emission gas turbine combustion chamber operating on the principle of partial preliminary formation of a fuel-air mixture. Comparison of four methods of liquid fuel supply to the channels of radial-axial swirlers (centrifugal, axial, combined, and radial) revealed the advantages of the radial supply method, which are manifested in a decrease in the overall temperature field non-uniformity at the outlet and a decrease in nitrogen oxides emissions. The calculated concentrations of nitrogen oxides and carbon monoxide at the flame tube outlet for the radial method of fuel supply are 32 and 9.1 ppm, respectively. The results can be useful for further modification and improvement of the characteristics of dual-fuel gas turbine combustion chambers operating with both gaseous and liquid fuels.
- 1 September 2020
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 27 (3) , 89-99
Open AccessInvestigations of the Working Process in a Dual-Fuel Low-Emission Combustion Chamber for an FPSO Gas Turbine Engine
This investigation is devoted to an analysis of the working process in a dual-fuel low-emission combustion chamber for a floating vessel’s gas turbine. The low-emission gas turbine combustion chamber with partial pre-mixing of fuel and air inside the outer and inner radial-axial swirlers was chosen as the object of research. When modelling processes in a dual-flow low-emission gas turbine combustion chamber, a generalized method is used, based on the numerical solution of the system of conservation and transport equations for a multi-component chemically reactive turbulent system, taking into consideration nitrogen oxides formation. The Eddy-Dissipation-Concept model, which incorporates Arrhenius chemical kinetics in a turbulent flame, and the Discrete Phase Model describing the interfacial interaction are used in the investigation. The obtained results confirmed the possibility of organizing efficient combustion of distillate liquid fuel in a low-emission gas turbine combustion chamber operating on the principle of partial preliminary formation of a fuel-air mixture. Comparison of four methods of liquid fuel supply to the channels of radial-axial swirlers (centrifugal, axial, combined, and radial) revealed the advantages of the radial supply method, which are manifested in a decrease in the overall temperature field non-uniformity at the outlet and a decrease in nitrogen oxides emissions. The calculated concentrations of nitrogen oxides and carbon monoxide at the flame tube outlet for the radial method of fuel supply are 32 and 9.1 ppm, respectively. The results can be useful for further modification and improvement of the characteristics of dual-fuel gas turbine combustion chambers operating with both gaseous and liquid fuels.
- Open Access
- 1 December 2019
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 26 (4) , 149-156
Investigation of the Combustion Processes in the Gas Turbine Module of an FPSO Operating on Associated Gas Conversion Products
In this paper, we consider the issue of thermo-chemical heat recovery of waste heat from gas turbine engines for the steam conversion of associated gas for offshore vessels. Current trends in the development of offshore infrastructure are identified, and the composition of power plants for mobile offshore drilling units and FPSO vessels is analyzed. We present the results of a comparison of power-to-volume ratio, power-to-weight ratio and efficiency for diesel and gas turbine power modules of various capacities. Mathematical modeling methods are used to analyze the parameters of an alternative gas turbine unit based on steam conversion of the associated gas, and the estimated efficiency of the energy module is shown to be 50%. In the modeling of the burning processes, the UGT 25000 serial low emission combustor is considered, and a detailed analysis of the processes in the combustor is presented, based on the application of a 35-reaction chemical mechanism. We confirm the possibility of efficient combustion of associated gas steam conversion products with different compositions, and establish that stable operation of the gas turbine combustor is possible when using fuels with low calorific values in the range 7–8 MJ/kg. It is found that the emissions of NOx and CO during operation of a gas turbine engine on the associated gas conversion products are within acceptable limits.
- 1 December 2019
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 26 (4) , 149-156
Open AccessInvestigation of the Combustion Processes in the Gas Turbine Module of an FPSO Operating on Associated Gas Conversion Products
In this paper, we consider the issue of thermo-chemical heat recovery of waste heat from gas turbine engines for the steam conversion of associated gas for offshore vessels. Current trends in the development of offshore infrastructure are identified, and the composition of power plants for mobile offshore drilling units and FPSO vessels is analyzed. We present the results of a comparison of power-to-volume ratio, power-to-weight ratio and efficiency for diesel and gas turbine power modules of various capacities. Mathematical modeling methods are used to analyze the parameters of an alternative gas turbine unit based on steam conversion of the associated gas, and the estimated efficiency of the energy module is shown to be 50%. In the modeling of the burning processes, the UGT 25000 serial low emission combustor is considered, and a detailed analysis of the processes in the combustor is presented, based on the application of a 35-reaction chemical mechanism. We confirm the possibility of efficient combustion of associated gas steam conversion products with different compositions, and establish that stable operation of the gas turbine combustor is possible when using fuels with low calorific values in the range 7–8 MJ/kg. It is found that the emissions of NOx and CO during operation of a gas turbine engine on the associated gas conversion products are within acceptable limits.