Michał Tylman
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Michał Tylman has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Jacek Balcerzak
Division of Molecular Engineering, Faculty of Process and Environmental Engineering, Lodz University of Technology, 213 Wólczańska Street, 93-005 Łódź, Poland
5 shared publications - Katarzyna Nawrotek
Department of Environmental Engineering, Faculty of Process and Environmental Engineering, Lodz University of Technology, Wolczanska 213 Street, 90-924 Lodz, Poland
5 shared publications - Karolina Rudnicka
Department of Immunology and Infectious Biology, Faculty of Biology and Environmental Protection, University of Lodz, Lodz, Poland
4 shared publications - Justyna Gatkowska
Department of Molecular Microbiology, Faculty of Biology and Environmental Protection, University of Lodz
3 shared publications Maria Mucha
Technical University of Łódź, Faculty of Process and Environmental Engineering, ul. Wólczańska 213, 90-924 Lodz, Poland
3 shared publicationsIwona Michalak
2 shared publications
Latest Publications
- 10 September 2018
- Published by Polish Chitin Society in Progress on Chemistry and application of Chitin and its Derivatives
- Vol. XXIII, 5-24
APPLICATIONS OF CHITOSAN–GRAPHENE OXIDE NANOCOMPOSITES IN MEDICAL SCIENCE: A REVIEW
Combinations of biopolymers with nanostructured carbon materials have been the subject of interest of many scientists in recent years. Particularly significant are nanocomposites made of chitosan, which is a linear aminopolysaccharide obtained in the process of deacetylation of chitin, and graphene oxide (GO). These systems, due to the atypical properties of both components such as non-toxicity, biocompatibility with human tissues and organs as well as bacteriostaticity, are characterised by a wide range of biomedical applications. They may be used in emergency medicine as dressing materials which accelerate wound healing, as well as carriers of drugs/genes and biological macromolecules, for example proteins, peptides and nucleic acids. In addition, CS-GO systems can potentially be used in regenerative medicine as scaffolds for cell culture. For this reason, the current publication presents the possibilities of the application of chitosan–graphene oxide nanocomposites in medicine considering the characteristics of the system components.
- 10 September 2018
- Published by Polish Chitin Society in Progress on Chemistry and application of Chitin and its Derivatives
- Vol. XXIII, 5-24
APPLICATIONS OF CHITOSAN–GRAPHENE OXIDE NANOCOMPOSITES IN MEDICAL SCIENCE: A REVIEW
Combinations of biopolymers with nanostructured carbon materials have been the subject of interest of many scientists in recent years. Particularly significant are nanocomposites made of chitosan, which is a linear aminopolysaccharide obtained in the process of deacetylation of chitin, and graphene oxide (GO). These systems, due to the atypical properties of both components such as non-toxicity, biocompatibility with human tissues and organs as well as bacteriostaticity, are characterised by a wide range of biomedical applications. They may be used in emergency medicine as dressing materials which accelerate wound healing, as well as carriers of drugs/genes and biological macromolecules, for example proteins, peptides and nucleic acids. In addition, CS-GO systems can potentially be used in regenerative medicine as scaffolds for cell culture. For this reason, the current publication presents the possibilities of the application of chitosan–graphene oxide nanocomposites in medicine considering the characteristics of the system components.
- 1 June 2018
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1161, 530-535
Structure of chitosan thermosensitive gels containing graphene oxide
- 1 June 2018
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1161, 530-535
Structure of chitosan thermosensitive gels containing graphene oxide
- Open Access
- 1 February 2017
- Published by Elsevier in Desalination and Water Treatment
- Vol. 64, 383-386
Extraction of butanol from aqueous solutions using a membrane contactor and an ionic liquid
- 1 February 2017
- Published by Elsevier in Desalination and Water Treatment
- Vol. 64, 383-386
Open AccessExtraction of butanol from aqueous solutions using a membrane contactor and an ionic liquid
- 1 November 2016
- Published by Elsevier in Carbohydrate Polymers
- Vol. 152, 119-128
Epineurium-mimicking chitosan conduits for peripheral nervous tissue engineering
- 1 November 2016
- Published by Elsevier in Carbohydrate Polymers
- Vol. 152, 119-128
Epineurium-mimicking chitosan conduits for peripheral nervous tissue engineering
- 1 July 2016
- Published by Elsevier in Journal of the Mechanical Behavior of Biomedical Materials
- Vol. 60, 256-266
Tubular electrodeposition of chitosan–carbon nanotube implants enriched with calcium ions
- 1 July 2016
- Published by Elsevier in Journal of the Mechanical Behavior of Biomedical Materials
- Vol. 60, 256-266
Tubular electrodeposition of chitosan–carbon nanotube implants enriched with calcium ions
- 20 June 2016
- Published by Wiley in Journal of Biomedical Materials Research Part A
- Vol. 104 (11) , 2701-2711
Assessment of degradation and biocompatibility of electrodeposited chitosan and chitosan–carbon nanotube tubular implants
Designing three‐dimensional tubular materials made of chitosan is still a challenging task. Availability of such forms is highly desired by tissue engineering, especially peripheral nerve tissue engineering. Aiming at this problem, we use an electrodeposition phenomenon in order to obtain chitosan and chitosan–carbon nanotube hydrogel tubular implants. The in vitro biocompatibility of the fabricated structures is assessed using a mouse hippocampal cell line (mHippoE‐18). As both implants do not induce significant cytotoxicity, they are next subjected to in vitro degradation studies in the environment simulating in vivo conditions for specified periods of time: 7, 14, and 28 days. The mass loss of implants indicates their stability at the tested time period; therefore, the materials are subcutaneously implanted in Sprague Dawley rats. The explants are collected after 7, 14, and 28 days. The assessment of composition and changes in tissues surrounding the implanted materials is made in respect to surrounding tissue thickness as well as the number of blood vessels, macrophages, lymphocytes, and neutrophils. No symptoms of acute inflammation are noticed at any point in time. The observed regular healing process allows concluding that both chitosan and chitosan–carbon hydrogel tubular implants are biocompatible with high application potential in tissue engineering. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2701–2711, 2016.
- 20 June 2016
- Published by Wiley in Journal of Biomedical Materials Research Part A
- Vol. 104 (11) , 2701-2711
Assessment of degradation and biocompatibility of electrodeposited chitosan and chitosan–carbon nanotube tubular implants
Designing three‐dimensional tubular materials made of chitosan is still a challenging task. Availability of such forms is highly desired by tissue engineering, especially peripheral nerve tissue engineering. Aiming at this problem, we use an electrodeposition phenomenon in order to obtain chitosan and chitosan–carbon nanotube hydrogel tubular implants. The in vitro biocompatibility of the fabricated structures is assessed using a mouse hippocampal cell line (mHippoE‐18). As both implants do not induce significant cytotoxicity, they are next subjected to in vitro degradation studies in the environment simulating in vivo conditions for specified periods of time: 7, 14, and 28 days. The mass loss of implants indicates their stability at the tested time period; therefore, the materials are subcutaneously implanted in Sprague Dawley rats. The explants are collected after 7, 14, and 28 days. The assessment of composition and changes in tissues surrounding the implanted materials is made in respect to surrounding tissue thickness as well as the number of blood vessels, macrophages, lymphocytes, and neutrophils. No symptoms of acute inflammation are noticed at any point in time. The observed regular healing process allows concluding that both chitosan and chitosan–carbon hydrogel tubular implants are biocompatible with high application potential in tissue engineering. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2701–2711, 2016.
- Open Access
- 3 February 2016
- Published by BioResources in BioResources
- Vol. 11 (2) , 4402-4414
The Combustive Heat of Thirteen Deciduous Wood Species
The heat of combustion relative to the mass, Qm, was evaluated for 13 deciduous wood species, ranging from low to high density. The maximum and minimum values for Qm ranged, respectively, from 19.01 kJ⋅g-1 (Sd = 7 J⋅g-1) to 21.66 kJ⋅g-1 (Sd = 6 J⋅g-1) for Populus tremula and Alnus glutinosa wood. The average value of the Qm for all wood specimens evaluated in the present study was 19.93 kJ⋅g-1 (Sd = 706 J⋅g-1), which is 1.6% higher than the value reported in the literature (Krzysik 1975). A high correlation, R = 0.99, was observed between the volumetric heat of combustion, Qv, and wood density, D0. No correlation was discovered among Qm, D0, the ash content in the wood, ac, as well as the content of the following elements in the ash: calcium (Ca), potassium (K), magnesium (Mg), sodium (Na), silica (Si), aluminum (Al), iron (Fe), copper (Cu), manganese (Mn), sulfur (S), and phosphorus (P).
- 3 February 2016
- Published by BioResources in BioResources
- Vol. 11 (2) , 4402-4414
Open AccessThe Combustive Heat of Thirteen Deciduous Wood Species
The heat of combustion relative to the mass, Qm, was evaluated for 13 deciduous wood species, ranging from low to high density. The maximum and minimum values for Qm ranged, respectively, from 19.01 kJ⋅g-1 (Sd = 7 J⋅g-1) to 21.66 kJ⋅g-1 (Sd = 6 J⋅g-1) for Populus tremula and Alnus glutinosa wood. The average value of the Qm for all wood specimens evaluated in the present study was 19.93 kJ⋅g-1 (Sd = 706 J⋅g-1), which is 1.6% higher than the value reported in the literature (Krzysik 1975). A high correlation, R = 0.99, was observed between the volumetric heat of combustion, Qv, and wood density, D0. No correlation was discovered among Qm, D0, the ash content in the wood, ac, as well as the content of the following elements in the ash: calcium (Ca), potassium (K), magnesium (Mg), sodium (Na), silica (Si), aluminum (Al), iron (Fe), copper (Cu), manganese (Mn), sulfur (S), and phosphorus (P).
- 1 January 2016
- Published by Elsevier in Carbohydrate Polymers
- Vol. 136, 764-771
Chitosan-based hydrogel implants enriched with calcium ions intended for peripheral nervous tissue regeneration
- 1 January 2016
- Published by Elsevier in Carbohydrate Polymers
- Vol. 136, 764-771
Chitosan-based hydrogel implants enriched with calcium ions intended for peripheral nervous tissue regeneration
- Open Access
- 1 December 2015
- Published by Walter de Gruyter GmbH in Ecological Chemistry and Engineering S
- Vol. 22 (4) , 565-575
Ethanol Recovery from Low-Concentration Aqueous Solutions Using Membrane Contactors with Ionic Liquids
Recovery of alcohols from diluted aqueous solutions is highly energy-intensive. In order to reduce the costs of concentration of alcohols, membrane processes (including membrane extraction) are used. This paper reports the results of ethanol concentration from diluted aqueous solutions using a hollow fiber membrane contactor with ionic liquid. The studies were performed using a contactor with microporous hollow fiber membranes. The membrane creates a barrier between the feed and extracting solvent, also providing a large mass transfer area. In the process, selected ionic liquid presenting different selectivity towards ethanol was used as extractant. The experiments were performed with feed concentrations of ethanol ranging from 1 to 5 wt.% and various feed flow rates ranging from 1 to 8 dm3/h.
- 1 December 2015
- Published by Walter de Gruyter GmbH in Ecological Chemistry and Engineering S
- Vol. 22 (4) , 565-575
Open AccessEthanol Recovery from Low-Concentration Aqueous Solutions Using Membrane Contactors with Ionic Liquids
Recovery of alcohols from diluted aqueous solutions is highly energy-intensive. In order to reduce the costs of concentration of alcohols, membrane processes (including membrane extraction) are used. This paper reports the results of ethanol concentration from diluted aqueous solutions using a hollow fiber membrane contactor with ionic liquid. The studies were performed using a contactor with microporous hollow fiber membranes. The membrane creates a barrier between the feed and extracting solvent, also providing a large mass transfer area. In the process, selected ionic liquid presenting different selectivity towards ethanol was used as extractant. The experiments were performed with feed concentrations of ethanol ranging from 1 to 5 wt.% and various feed flow rates ranging from 1 to 8 dm3/h.
- Open Access
- 1 November 2015
- Published by LUKASIEWICZ Research Network - Industrial Chemistry Research Institute in Polimery
- Vol. 61 (11/12) , 686-692
Crystallization kinetics of polycaprolactone in nanocomposites
The paper presents research results on the crystallization kinetics of polycaprolactone (PCL) with micro- and nano-additives such as talc (nucleation agent) and nanosilver (antibacterial agent). The process of isothermal crystallization was studied in a narrow temperature range 38.5—41.5 °C using Differential Scanning Calorimetry (DSC) and Thermooptical Analysis (TOA) methods. The kinetics of the process are described using the Avrami model. The parameters n and log K of the equation were calculated. Changes in the half time of crystallization, degree of crystallinity and melting temperature of the polymer under the influence of the fillers and the conditions of crystallization were analyzed.
- 1 November 2015
- Published by LUKASIEWICZ Research Network - Industrial Chemistry Research Institute in Polimery
- Vol. 61 (11/12) , 686-692
Open AccessCrystallization kinetics of polycaprolactone in nanocomposites
The paper presents research results on the crystallization kinetics of polycaprolactone (PCL) with micro- and nano-additives such as talc (nucleation agent) and nanosilver (antibacterial agent). The process of isothermal crystallization was studied in a narrow temperature range 38.5—41.5 °C using Differential Scanning Calorimetry (DSC) and Thermooptical Analysis (TOA) methods. The kinetics of the process are described using the Avrami model. The parameters n and log K of the equation were calculated. Changes in the half time of crystallization, degree of crystallinity and melting temperature of the polymer under the influence of the fillers and the conditions of crystallization were analyzed.