Johnson William
Johnson William has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
R. Nakkeeran
Department of Electronics and Communication Engineering, Pondicherry Engineering College, Puducherry-605 014, India
8 shared publications- Panneerselvam Murugapandiyan
Department of Electronics and Communication Engineering, Anil Neerukonda Institute of Technology and Sciences, Visakhapatnam, India
6 shared publications S. Ravimaran
MAM Coll Engn, Dept Elect & Comp Sci, Tiruchirappalli 621105, Tamil Nadu, India
6 shared publications- Elizabeth Caroline Britto
IFET College of Engineering, Electronics and communication Engineering Department, Villupuram, Tamilnadu, India
4 shared publications - Senthilkumar Subramaniyan
University College of Engineering
4 shared publications - Surendar Udhayasuriyan
Department of Electronics and Communication Engineering, K.Ramakrishnan College of Engineering, Trichy, India
4 shared publications
Latest Publications
- 16 August 2024
- Published by Springer Nature in Brazilian Journal of Physics
- Vol. 54 (5) , 1-8
Design of Asymmetric Metamaterial 8-Circular Element Array Antenna for 5G MIMO Applications
- 16 August 2024
- Published by Springer Nature in Brazilian Journal of Physics
- Vol. 54 (5) , 1-8
Design of Asymmetric Metamaterial 8-Circular Element Array Antenna for 5G MIMO Applications
- 14 September 2022
- Published by Springer Nature in Wireless Personal Communications
- Vol. 128 (3) , 2155-2174
A Compact Phased Array Antenna for 5G MIMO Applications
- 14 September 2022
- Published by Springer Nature in Wireless Personal Communications
- Vol. 128 (3) , 2155-2174
A Compact Phased Array Antenna for 5G MIMO Applications
- 23 June 2022
- Published by Springer Nature in Applied Physics A
- Vol. 128 (7) , 1-14
A dual-polarized metamaterial spiral MIMO antenna for 5G applications
- 23 June 2022
- Published by Springer Nature in Applied Physics A
- Vol. 128 (7) , 1-14
A dual-polarized metamaterial spiral MIMO antenna for 5G applications
- 20 November 2021
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 47 (3) , 3473-3480
A Compact Metamaterial-Based Open-Ended CPW Band-Pass Filter for Wireless Applications
- 20 November 2021
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 47 (3) , 3473-3480
A Compact Metamaterial-Based Open-Ended CPW Band-Pass Filter for Wireless Applications
- 25 October 2020
- Published by Wiley in International Journal of Communication Systems
- Vol. 34 (1)
Design of slotted patch antenna based on photonic crystal for wireless communication
Summary: Nowadays, the wireless communication is improved in numerous ranges, and the use of the high speed of data rate in the communication systems is needed. The standing problem of high‐performance planar antenna is reduced by the recently developed artificial dielectric called photonic crystal, which is used to control and manipulate the optical property of light. This paper addresses the slotted tube antenna structure, and the investigation is done by the concept of triangular lattice structure based on the photonic crystal. This utility enhances the return loss of −57.81 dB and the voltage standing wave ratio (VSWR) of 1.002 at 2.37 THz operating frequencies. The increase in hole radius provides the shifting in zero dispersion point towards the shorter wavelength that helps for faster data rate transmission applications. Further, to characterize the model of the proposed antenna, the optimal value of the air hole, lattice constant value between holes and the thickness of the slot are found and the related parameters of such antenna are studied with the support of simulation software CST microwave studio.
- 25 October 2020
- Published by Wiley in International Journal of Communication Systems
- Vol. 34 (1)
Design of slotted patch antenna based on photonic crystal for wireless communication
Summary: Nowadays, the wireless communication is improved in numerous ranges, and the use of the high speed of data rate in the communication systems is needed. The standing problem of high‐performance planar antenna is reduced by the recently developed artificial dielectric called photonic crystal, which is used to control and manipulate the optical property of light. This paper addresses the slotted tube antenna structure, and the investigation is done by the concept of triangular lattice structure based on the photonic crystal. This utility enhances the return loss of −57.81 dB and the voltage standing wave ratio (VSWR) of 1.002 at 2.37 THz operating frequencies. The increase in hole radius provides the shifting in zero dispersion point towards the shorter wavelength that helps for faster data rate transmission applications. Further, to characterize the model of the proposed antenna, the optimal value of the air hole, lattice constant value between holes and the thickness of the slot are found and the related parameters of such antenna are studied with the support of simulation software CST microwave studio.
- 1 August 2020
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 59 (08) , 087102-13
Investigation of the influence of fluctuation in air hole radii and lattice constant on photonic crystal substrate for terahertz applications
Recently, the use of carrier frequencies in the domain of wireless bearer has been enhanced to fulfill the data transmission need. The research activities are coordinated to wireless communication with high information rates and amended security. An idea of the slotted rectangular patch antenna that depends on the photonic crystal structure is offered for a wireless communication system. The proposed antenna is contrasted with the accustomed slotted antenna. In addition, the investigation of the designed antenna is performed with various radius values and lattice constant. The negligible return loss of −43.79 dB and voltage standing wave ratio of 1.1 are accomplished at 2-μm radius with the lattice constant of a = 5 μm at fr = 2.23 THz.
- 1 August 2020
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 59 (08) , 087102-13
Investigation of the influence of fluctuation in air hole radii and lattice constant on photonic crystal substrate for terahertz applications
Recently, the use of carrier frequencies in the domain of wireless bearer has been enhanced to fulfill the data transmission need. The research activities are coordinated to wireless communication with high information rates and amended security. An idea of the slotted rectangular patch antenna that depends on the photonic crystal structure is offered for a wireless communication system. The proposed antenna is contrasted with the accustomed slotted antenna. In addition, the investigation of the designed antenna is performed with various radius values and lattice constant. The negligible return loss of −43.79 dB and voltage standing wave ratio of 1.1 are accomplished at 2-μm radius with the lattice constant of a = 5 μm at fr = 2.23 THz.
- Open Access
- 5 August 2019
- Published by European Open Science in European Journal of Engineering and Technology Research
- Vol. 4 (8) , 130-134
Design and Analysis of MIMO Spiral Antenna for GPS, WLAN and UAV Applications
This paper presents a multiband compact microstrip MIMO antenna for Unmanned Air Vehicle, GPS and WLAN applications. It consists of two symmetric triangular spiral shape patch and defected ground structure (DGS). The antenna is designed using low cost FR4 Substrate and analysed by using commercially available electromagnetic simulation software CST. The simulation results shows the designed antenna has resonance frequencies at 1.62 GHz and bandwidth from1.6027 GHz to 1.6391 GHz, at 2.42 GHz from 2.3609 GHz to 2.4667 GHz and 3.79 GHz from 3.6418 GHz to 3.7909 GHz frequency which covers GPS, WLAN and UAV(LTE band) applications respectively. Detailed physical analysis of proposed antenna is presented and the characteristics of antenna are verified by the return loss, insertion loss, gain and directivity. It is found that it has good performance for above applications. The overall size of the antenna is 28 x 20.5 mm2 which is less than the conventional antenna by 84% at lowest resonating frequency of 1.62 GHz.
- 5 August 2019
- Published by European Open Science in European Journal of Engineering and Technology Research
- Vol. 4 (8) , 130-134
Open AccessDesign and Analysis of MIMO Spiral Antenna for GPS, WLAN and UAV Applications
This paper presents a multiband compact microstrip MIMO antenna for Unmanned Air Vehicle, GPS and WLAN applications. It consists of two symmetric triangular spiral shape patch and defected ground structure (DGS). The antenna is designed using low cost FR4 Substrate and analysed by using commercially available electromagnetic simulation software CST. The simulation results shows the designed antenna has resonance frequencies at 1.62 GHz and bandwidth from1.6027 GHz to 1.6391 GHz, at 2.42 GHz from 2.3609 GHz to 2.4667 GHz and 3.79 GHz from 3.6418 GHz to 3.7909 GHz frequency which covers GPS, WLAN and UAV(LTE band) applications respectively. Detailed physical analysis of proposed antenna is presented and the characteristics of antenna are verified by the return loss, insertion loss, gain and directivity. It is found that it has good performance for above applications. The overall size of the antenna is 28 x 20.5 mm2 which is less than the conventional antenna by 84% at lowest resonating frequency of 1.62 GHz.
- 24 July 2019
- Published by Taylor & Francis in IETE Journal of Research
- Vol. 68 (2) , 1084-1090
High Gain Series Fed Two Dipole Array Antenna with Reduced Size for LTE Application
A novel series-fed two dipole antenna array with enhanced gain and reduced size is proposed covering the different frequency bands of the LTE communication technology. The proposed antenna works in the frequency range from (1.7–2.8) GHz. Also the gain of the antenna is increased to 1.5–2 dB compared with the conventional and modified STDA. The size of the proposed antenna (Circular patch STDA) is reduced by 25% approximately compared with the conventional STDA and 13% approximately with modified square patch top loading STDA.
- 24 July 2019
- Published by Taylor & Francis in IETE Journal of Research
- Vol. 68 (2) , 1084-1090
High Gain Series Fed Two Dipole Array Antenna with Reduced Size for LTE Application
A novel series-fed two dipole antenna array with enhanced gain and reduced size is proposed covering the different frequency bands of the LTE communication technology. The proposed antenna works in the frequency range from (1.7–2.8) GHz. Also the gain of the antenna is increased to 1.5–2 dB compared with the conventional and modified STDA. The size of the proposed antenna (Circular patch STDA) is reduced by 25% approximately compared with the conventional STDA and 13% approximately with modified square patch top loading STDA.
- Open Access
- 9 July 2019
- Published by European Open Science in European Journal of Engineering and Technology Research
- Vol. 4 (7) , 28-30
Dual band Stepped Impedance Interdigital Microstrip Filter for LTE Bands
In this paper, a dual band microstrip bandpass filter has been proposed utilizing three edge coupled resonators, interdigital stubs and DGS technique. To enhance the coupling degree, two interdigital coupled feed lines are employed in this filter. The suppressing cell consists of stepped impedance ladder type resonators, which provides a wide stopband. The proposed suppressing cell has clear advantages like low insertion loss in the passband and suitable roll off. The frequency response of the filter looks like a standard dual band band-pass filter. The filter exhibits a dual passband with resonant frequencies at 2.2GHz and 3.45GHz covers LTE1 and LTE22 bands.
- 9 July 2019
- Published by European Open Science in European Journal of Engineering and Technology Research
- Vol. 4 (7) , 28-30
Open AccessDual band Stepped Impedance Interdigital Microstrip Filter for LTE Bands
In this paper, a dual band microstrip bandpass filter has been proposed utilizing three edge coupled resonators, interdigital stubs and DGS technique. To enhance the coupling degree, two interdigital coupled feed lines are employed in this filter. The suppressing cell consists of stepped impedance ladder type resonators, which provides a wide stopband. The proposed suppressing cell has clear advantages like low insertion loss in the passband and suitable roll off. The frequency response of the filter looks like a standard dual band band-pass filter. The filter exhibits a dual passband with resonant frequencies at 2.2GHz and 3.45GHz covers LTE1 and LTE22 bands.
- 9 October 2018
- Published by Springer Nature in Photonic Network Communications
- Vol. 37 (1) , 38-52
Performance analysis and comparison of optical signal processing beamforming networks: a survey
- 9 October 2018
- Published by Springer Nature in Photonic Network Communications
- Vol. 37 (1) , 38-52
Performance analysis and comparison of optical signal processing beamforming networks: a survey