Juan Carlos Burgos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Juan Carlos Burgos has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Belén García
Electrical Engineering Department, Universidad Carlos III de Madrid, Leganés, Spain
8 shared publications - Daniel Pérez-Rosa
Electrical Engineering Department, Universidad Carlos III de Madrid, Leganés, 28911 Madrid, Spain
4 shared publications - Andrés Montero
Lecturer of the Department of Electrical Engineering, Universidad Carlos III de Madrid, Madrid, Spain
3 shared publications - Elmer Sorrentino
Dpto. de Conversión y Transporte de Energía Universidad Simón Bolívar Apdo. Postal 89.000 Caracas Venezuela
2 shared publications - Elmer Sorrentino
Dpto. de Ingeniería Eléctrica, Universidad Carlos III de Madrid, Madrid, Spain
2 shared publications Alejandro Moreno
Universidad Carlos III de Madrid, Leganés, Spain
1 shared publication
Latest Publications
- 24 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 30 (4) , 1641-1648
Study on the Contamination Rate of Mineral Oil in Natural-Ester Retrofilled Transformers
The replacement of mineral oil by ester (retrofilling) is a practice used in power transformers to reduce fire and environmental risk. Although measures are taken to remove traces of oil on the paper, a certain amount of mineral oil remains, which migrates over time. This article presents a study to evaluate the migration of mineral oil from paper to ester using techniques such as the iodine value or the measurement of permittivity and dielectric losses.
- 24 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 30 (4) , 1641-1648
Study on the Contamination Rate of Mineral Oil in Natural-Ester Retrofilled Transformers
The replacement of mineral oil by ester (retrofilling) is a practice used in power transformers to reduce fire and environmental risk. Although measures are taken to remove traces of oil on the paper, a certain amount of mineral oil remains, which migrates over time. This article presents a study to evaluate the migration of mineral oil from paper to ester using techniques such as the iodine value or the measurement of permittivity and dielectric losses.
- Open Access
- 22 November 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (23) , 4128
Dielectric Strength of Nanofluid-Impregnated Transformer Solid Insulation
The interest in developing new fluids that can be used as dielectric liquids for transformers has driven the research on dielectric nanofluids in the last years. A number of authors have reported promising results on the electrical and thermal properties of dielectric nanofluids. Less attention has been paid to the interaction of these fluids with the cellulose materials that constitute the solid insulation of the transformers. In the present study, the dielectric strength of cellulose insulation is investigated, comparing its behavior when it is impregnated with transformer mineral oil and when it is impregnated with a dielectric nanofluid. The study includes the analysis of the AC breakdown voltage and the impulse breakdown voltage of the samples. Large improvements were observed on the AC breakdown voltages of the specimens impregnated with nanofluids, while the enhancements were lower in the case of the impulse tests. The reasons for the increase in AC breakdown voltage were investigated, considering the dielectric properties of the nanofluids used to impregnate the samples of cellulose. The analysis was completed with a finite element study that revealed the effect of the nanoparticles on the electric field distribution within the test cell, and its role in the observed enhancement.
- 22 November 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (23) , 4128
Open AccessDielectric Strength of Nanofluid-Impregnated Transformer Solid Insulation
The interest in developing new fluids that can be used as dielectric liquids for transformers has driven the research on dielectric nanofluids in the last years. A number of authors have reported promising results on the electrical and thermal properties of dielectric nanofluids. Less attention has been paid to the interaction of these fluids with the cellulose materials that constitute the solid insulation of the transformers. In the present study, the dielectric strength of cellulose insulation is investigated, comparing its behavior when it is impregnated with transformer mineral oil and when it is impregnated with a dielectric nanofluid. The study includes the analysis of the AC breakdown voltage and the impulse breakdown voltage of the samples. Large improvements were observed on the AC breakdown voltages of the specimens impregnated with nanofluids, while the enhancements were lower in the case of the impulse tests. The reasons for the increase in AC breakdown voltage were investigated, considering the dielectric properties of the nanofluids used to impregnate the samples of cellulose. The analysis was completed with a finite element study that revealed the effect of the nanoparticles on the electric field distribution within the test cell, and its role in the observed enhancement.
- 29 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 33, 1-4
Temperature Dependency of the Dielectric Response of Nanofluid-based Transformer Insulation Systems
In the last decade the interest in the development of nanofluids for electrotechnical applications has raised notably; these fluids provide improvements in some of the main properties of conventional dielectric oils. An important number of authors have studied the properties of different nanofluids and the knowledge about this fluids is significant at the moment. As a further step it is important to study how nanofluids behave when interacting with other transformer components. In this line, the study of the interaction with the Kraft paper that constitutes part of the transformer solid insulation is one of the most important topics to be addressed. The interaction between these materials and the properties of nanofluid-cellulose insulation systems under transformer working conditions should be studied before NFs could be used in real transformers. A study on the dielectric properties of the system is presented in this work which analyses the effect of the operating temperature in the dielectric response of nanofluid-based insulation systems.
- 29 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 33, 1-4
Temperature Dependency of the Dielectric Response of Nanofluid-based Transformer Insulation Systems
In the last decade the interest in the development of nanofluids for electrotechnical applications has raised notably; these fluids provide improvements in some of the main properties of conventional dielectric oils. An important number of authors have studied the properties of different nanofluids and the knowledge about this fluids is significant at the moment. As a further step it is important to study how nanofluids behave when interacting with other transformer components. In this line, the study of the interaction with the Kraft paper that constitutes part of the transformer solid insulation is one of the most important topics to be addressed. The interaction between these materials and the properties of nanofluid-cellulose insulation systems under transformer working conditions should be studied before NFs could be used in real transformers. A study on the dielectric properties of the system is presented in this work which analyses the effect of the operating temperature in the dielectric response of nanofluid-based insulation systems.
- Open Access
Influence of Nanoparticles on the Degradation Processes of Ester-Based Transformer Insulation Systems
The use of nanofluids as dielectric liquids for transformer insulation has been widely investigated during the last decade. A number of authors have performed extensive studies on liquids produced from different types of nanoparticles and base fluids, providing evidence of their good dielectric properties. Nevertheless, nanodielectric fluids are still at the research stage, and they are far from being a solution that can be applied to real transformers. One of the aspects that might be clarified is their compatibility with the rest of the materials present in the transformer and their behavior throughout the life of the equipment. This paper studies the aging process of cellulose impregnated with an ester-based nanofluid and compares it with the process that takes place when the impregnation liquid is a natural ester. Accelerated aging experiments were performed, and physical and chemical characterization of the process with several analytical techniques was carried out. The mechanical degradation of the cellulose was studied in terms of tensile strength, and the evolution of moisture in the paper and oil was monitored throughout the aging process. The study was completed with FTIR and XPS tests aimed at studying the chemical changes of the materials during the aging process. The experimental results suggest that the degradation rate of the cellulose is not significantly affected by the presence of nanoparticles. However, the XPS study revealed that the chemical reactions involved in the degradation processes of both types of insulation might differ. Several mechanisms are proposed in this work.
Open AccessInfluence of Nanoparticles on the Degradation Processes of Ester-Based Transformer Insulation Systems
The use of nanofluids as dielectric liquids for transformer insulation has been widely investigated during the last decade. A number of authors have performed extensive studies on liquids produced from different types of nanoparticles and base fluids, providing evidence of their good dielectric properties. Nevertheless, nanodielectric fluids are still at the research stage, and they are far from being a solution that can be applied to real transformers. One of the aspects that might be clarified is their compatibility with the rest of the materials present in the transformer and their behavior throughout the life of the equipment. This paper studies the aging process of cellulose impregnated with an ester-based nanofluid and compares it with the process that takes place when the impregnation liquid is a natural ester. Accelerated aging experiments were performed, and physical and chemical characterization of the process with several analytical techniques was carried out. The mechanical degradation of the cellulose was studied in terms of tensile strength, and the evolution of moisture in the paper and oil was monitored throughout the aging process. The study was completed with FTIR and XPS tests aimed at studying the chemical changes of the materials during the aging process. The experimental results suggest that the degradation rate of the cellulose is not significantly affected by the presence of nanoparticles. However, the XPS study revealed that the chemical reactions involved in the degradation processes of both types of insulation might differ. Several mechanisms are proposed in this work.
- 25 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 37 (3) , 2403-2412
Dielectric Design of Ester-Filled Power Transformers: AC Stress Analysis
In the last 20 years the use of ester fluids as an alternative to mineral oil for transformer insulation has been an active field of research and development. These liquids have a much lower environmental impact than mineral oils, besides reducing the transformer’s fire risk. Although the use of natural and synthetic esters is nowadays frequent for certain applications, as for distribution transformers in highly populated areas, railway transformers or off-shore windmill transformers, the experience on large and medium sized units is still reduced. One of the critical aspects that must be assessed to use esters as dielectric fluids for large size transformers is the dielectric design of the equipment. The permittivity of esters and ester-impregnated cellulose are different from those of mineral-oil-cellulose systems, what has an impact on the electric field distribution in the transformer. Additionally, in some cases, the dielectric strength of ester fluids differs from that of mineral oil. This paper presents a study about the dielectric design of ester-based power transformers. The insulation system of a 400/138 kV, 280 MVA transformer was modelled using a finite element tool and a comparison of the field distribution under 50 Hz AC power voltage of both insulation systems is provided.
- 25 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 37 (3) , 2403-2412
Dielectric Design of Ester-Filled Power Transformers: AC Stress Analysis
In the last 20 years the use of ester fluids as an alternative to mineral oil for transformer insulation has been an active field of research and development. These liquids have a much lower environmental impact than mineral oils, besides reducing the transformer’s fire risk. Although the use of natural and synthetic esters is nowadays frequent for certain applications, as for distribution transformers in highly populated areas, railway transformers or off-shore windmill transformers, the experience on large and medium sized units is still reduced. One of the critical aspects that must be assessed to use esters as dielectric fluids for large size transformers is the dielectric design of the equipment. The permittivity of esters and ester-impregnated cellulose are different from those of mineral-oil-cellulose systems, what has an impact on the electric field distribution in the transformer. Additionally, in some cases, the dielectric strength of ester fluids differs from that of mineral oil. This paper presents a study about the dielectric design of ester-based power transformers. The insulation system of a 400/138 kV, 280 MVA transformer was modelled using a finite element tool and a comparison of the field distribution under 50 Hz AC power voltage of both insulation systems is provided.
- Open Access
- 25 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 27 (2) , 352-359
AC breakdown voltage of Fe3O4 based nanodielectric fluids. Part 1: Analysis of dry fluids
The interest in developing new nanodielectric fluids suitable for electrotechnical applications has increased significantly in the last decade. Several authors have reported experiences on fluids manufactured using different base fluids and nanoparticles. Most of these studies are focused on the comparison of the thermal and dielectric properties of the nanofluids and the base liquids and most authors have found that the addition of nanoparticles to insulating liquids can lead to an improvement of their dielectric properties. This two-part paper analyzes the enhancement of the AC breakdown voltage of several nanodielectric fluids prepared by dispersing variable concentrations of Fe 3 O 4 nanoparticles in a mineral oil. In the first part of the study, the performance of fluids that had been previously dried and degasified were tested. In the second part of the study the impact of the presence of moisture in the dielectric strength of the liquids is analyzed trying to get insight into the physical mechanisms that justify the observed enhancements when nanoparticles are added to insulating liquids.
- 25 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 27 (2) , 352-359
Open AccessAC breakdown voltage of Fe3O4 based nanodielectric fluids. Part 1: Analysis of dry fluids
The interest in developing new nanodielectric fluids suitable for electrotechnical applications has increased significantly in the last decade. Several authors have reported experiences on fluids manufactured using different base fluids and nanoparticles. Most of these studies are focused on the comparison of the thermal and dielectric properties of the nanofluids and the base liquids and most authors have found that the addition of nanoparticles to insulating liquids can lead to an improvement of their dielectric properties. This two-part paper analyzes the enhancement of the AC breakdown voltage of several nanodielectric fluids prepared by dispersing variable concentrations of Fe 3 O 4 nanoparticles in a mineral oil. In the first part of the study, the performance of fluids that had been previously dried and degasified were tested. In the second part of the study the impact of the presence of moisture in the dielectric strength of the liquids is analyzed trying to get insight into the physical mechanisms that justify the observed enhancements when nanoparticles are added to insulating liquids.
- Open Access
Investigation of the Lightning Impulse Breakdown Voltage of Mineral Oil based Fe3O4 Nanofluids
The recent interest in the development of nanomaterials has led researchers to the study of their electrical properties and the applications that they may have as insulating materials. One of these applications is the use of nanofluids as electrical insulation of power transformers. It has been reported that the dielectric properties of insulating liquids in which small amounts of nanoparticles have been dispersed are, in some cases, superior to those of the base fluids. Although these materials are promising, and their application could lead to advantages for the transformer design and reliability in the future, more research is necessary to evaluate different combination of materials under a wider range of experimental conditions. In this paper, a research on the lightning impulse breakdown voltage of mineral oil and several Fe3O4-based nanofluids is presented. Fluids prepared with different concentrations of nanoparticles were subjected to impulse lightning voltages considering both positive and negative polarities. As shown in this work the positive impulse breakdown voltage of the liquids showed improvements of up to 50%; in the case of the negative impulses not significant improvements were obtained.
Open AccessInvestigation of the Lightning Impulse Breakdown Voltage of Mineral Oil based Fe3O4 Nanofluids
The recent interest in the development of nanomaterials has led researchers to the study of their electrical properties and the applications that they may have as insulating materials. One of these applications is the use of nanofluids as electrical insulation of power transformers. It has been reported that the dielectric properties of insulating liquids in which small amounts of nanoparticles have been dispersed are, in some cases, superior to those of the base fluids. Although these materials are promising, and their application could lead to advantages for the transformer design and reliability in the future, more research is necessary to evaluate different combination of materials under a wider range of experimental conditions. In this paper, a research on the lightning impulse breakdown voltage of mineral oil and several Fe3O4-based nanofluids is presented. Fluids prepared with different concentrations of nanoparticles were subjected to impulse lightning voltages considering both positive and negative polarities. As shown in this work the positive impulse breakdown voltage of the liquids showed improvements of up to 50%; in the case of the negative impulses not significant improvements were obtained.
- 1 December 2018
- Published by Elsevier in Electric Power Systems Research
- Vol. 165, 94-101
Rules to estimate the expected values of zero-sequence impedances in 3-phase core-type transformers
- 1 December 2018
- Published by Elsevier in Electric Power Systems Research
- Vol. 165, 94-101
Rules to estimate the expected values of zero-sequence impedances in 3-phase core-type transformers
- Open Access
Comparison of Positive Streamers in Liquid Dielectrics with and without Nanoparticles Simulated with Finite-Element Software
In this paper, a comparison of positive streamer diffusion propagation is carried out in three configurations of oil transformers: mineral transformer oil, mineral oil with solid dielectric barriers, and a nanofluid. The results have been solved using a finite-element method with a two-dimensional (2D) axi-symmetric space dimension selected. Additionally, previous results from other research has been reviewed to compare the results obtained. As expected, it is confirmed that the nanoparticles improve the dielectric properties of the mineral oil. In addition, it is observed that the dielectric solid blocks the propagation of the streamer when it is submerged with a horizontal orientation, thus perpendicular to the applied electric field. The computer used, with four cores (each 3.4 GHz) and 16 GB of RAM, was not sufficient for performing the simulations of the models with great precision. However, with these first models, the tendency of the dielectric behavior of the oil was obtained for the three cases in which the streamer was acting through the transformer oil. The simulation of these models, in the future, in a supercomputer with a high performance in terms of RAM memory may allow us to predict, as an example, the best concentration of nanoparticles to retard the streamer inception. Finally, other dielectric issues will be predicted using these models, such as to analyze the advantages and drawbacks of the presence of dielectrics inside the oil transformer.
Open AccessComparison of Positive Streamers in Liquid Dielectrics with and without Nanoparticles Simulated with Finite-Element Software
In this paper, a comparison of positive streamer diffusion propagation is carried out in three configurations of oil transformers: mineral transformer oil, mineral oil with solid dielectric barriers, and a nanofluid. The results have been solved using a finite-element method with a two-dimensional (2D) axi-symmetric space dimension selected. Additionally, previous results from other research has been reviewed to compare the results obtained. As expected, it is confirmed that the nanoparticles improve the dielectric properties of the mineral oil. In addition, it is observed that the dielectric solid blocks the propagation of the streamer when it is submerged with a horizontal orientation, thus perpendicular to the applied electric field. The computer used, with four cores (each 3.4 GHz) and 16 GB of RAM, was not sufficient for performing the simulations of the models with great precision. However, with these first models, the tendency of the dielectric behavior of the oil was obtained for the three cases in which the streamer was acting through the transformer oil. The simulation of these models, in the future, in a supercomputer with a high performance in terms of RAM memory may allow us to predict, as an example, the best concentration of nanoparticles to retard the streamer inception. Finally, other dielectric issues will be predicted using these models, such as to analyze the advantages and drawbacks of the presence of dielectrics inside the oil transformer.
- 1 November 2014
- Published by Elsevier in Electric Power Systems Research
- Vol. 116, 439-443
About the difference between zero-sequence magnetizing impedances of a 3-phase core-type transformer
- 1 November 2014
- Published by Elsevier in Electric Power Systems Research
- Vol. 116, 439-443
About the difference between zero-sequence magnetizing impedances of a 3-phase core-type transformer