RARuth Chinyere Anyanwu

Ruth Chinyere Anyanwu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ruth Chinyere Anyanwu has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Evaluation of Growth Rate and Biomass Productivity of Scenedesmus quadricauda and Chlorella vulgaris under Different LED Wavelengths and Photoperiods

    by Ruth Chinyere Anyanwu, Cristina Rodriguez, Andy Durrant, Abdul Ghani Olabi

    Cultivation has been identified as an essential stage for biofuel production. This research has examined two important parameters for the industrial production of microalgae, namely microalgae growth rate and biomass productivity. Chlorella vulgaris and Scenedesmusquadricauda were cultivated using a closed photobioreactor (PBR). A novel approach for cultivation and energy input reduction was developed by incorporating periods of darkness during cultivation, as would happen in nature. Three different LED light sources (white, red, and green) were used to determine the conditions that result in the highest growth rate and biomass productivity. C. vulgaris and S. quadricauda responded differently to lighting conditions. It was found that, depending on the LED source and light period, different growth rates and biomass productivities were obtained. Overall, experimental results obtained in this study indicated that a white LED is more effective than green or red LEDs in increasing microalgae growth rate and biomass productivity. A maximum growth rate of 3.41 d−1 and a biomass productivity of 2.369 g L−1d−1 were achieved for S.quadricauda under a 19 h period of white light alternating with 5 h of darkness. For C. vulgaris the maximum growth rate of 3.49 d−1 and maximum biomass productivity of 2.438 g L−1d−1 were achieved by continuous white light with no darkness period.


  • Open Access

    Optimisation of Tray Drier Microalgae Dewatering Techniques Using Response Surface Methodology

    by Ruth Chinyere Anyanwu, Cristina Rodriguez, Andy Durrant, Abdul Ghani Olabi

    The feasibility of the application of a tray drier in dewatering microalgae was investigated. Response surface methodology (RSM) based on Central Composite Design (CCD) was used to evaluate and optimise the effect of air temperature and air velocity as independent variables on the dewatering efficiency as a response function. The significance of independent variables and their interactions was tested by means of analysis of variance (ANOVA) with a 95% confidence level. Results indicate that the air supply temperature was the main parameter affecting dewatering efficiency, while air velocity had a slight effect on the process. The optimum operating conditions to achieve maximum dewatering were determined: air velocities and temperatures ranged between 4 to 10 m/s and 40 to 56 °C respectively. An optimised dewatering efficiency of 92.83% was achieved at air an velocity of 4 m/s and air temperature of 48 °C. Energy used per 1 kg of dry algae was 0.34 kWh.


  • Microalgae Cultivation Technologies

    by Ruth C. Anyanwu, Cristina Rodriguez, Andy Durrant, Abdul-Ghani Olabi


  • Micro-Macroalgae Properties and Applications

    by Ruth Chinyere Anyanwu, Cristina Rodriguez, Andy Durrant, Abdul Ghani Olabi