EDEvrim Eliguzeloglu Dalkilic

Evrim Eliguzeloglu Dalkilic

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Evrim Eliguzeloglu Dalkilic has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect of aging on cavity adaptation of Class V cavities restored with bioactive restorative materials: a Micro-CT and SEM analysis

    by Ayşe Alanur Sağun, Cumali Çatak, Mert Ocak, Burcu Oglakci Ozkoc, Evrim Eliguzeloglu Dalkilic

  • Shear Bond Strength to Calcium Hydroxide: Does Cavity Conditioning Make a Difference for Glass Ionomer Based Materials?

    by Ceren Değer, Leyla Fazlıoglu, Zümrüt Ceren Özduman, Burcu Oglakci Ozkoc, Evrim Eligüzeloğlu Dalkılıç

    Background and Aim: Calcium hydroxide liners are commonlyused in deep cavities and their mechanical properties may affect theadhesion of restorative materials. This study evaluated the effect ofcavity conditioner application on the shear bond strength of glassionomer–based materials to a calcium hydroxide liner.Materials and Methods: Sixty acrylic blocks containing standardizedcylindrical cavities were prepared and filled with a calcium hydroxideliner (Dycal, Dentsply Caulk). The specimens were first dividedaccording to cavity conditioner application (with or without 20%polyacrylic acid) and then subdivided based on the restorative materialapplied over the liner: a conventional glass ionomer cement (Fuji IX GPCapsule, GC Dental), a resin-modified glass ionomer cement (Fuji II LCCapsule, GC Dental), or a bioactive ionic resin liner (Activa BioActiveLiner, Pulpdent) (n=10). Shear bond strength testing and failure modeanalysis were performed. Data were analyzed using two-way analysisof variance and Bonferroni post hoc tests (α=0.05).Results: Glass ionomer–based material type significantly affectedshear bond strength (p0.05). Fuji II LC showed the highestbond strength values (6.48±2.67 and 6.81±3.50 MPa), whereasFuji IX GP showed the lowest (3.54±1.98 and 4.13±1.46 MPa).Activa BioActive Liner showed comparable values (4.99±1.84 and6.39±2.34 MPa). Adhesive failures predominated in Fuji IX GP groups,whereas cohesive and mixed failures were more frequent in resin-containinggroups.Conclusion: Cavity conditioner application did not significantlyimprove bond strength to calcium hydroxide. Resin-modified glassionomer may provide more favorable interfacial performance thanconventional GIC, whereas the bioactive ionic resin liner demonstratedcomparable performance to both materials.

  • Open Access

    Marginal gap formation and fracture strength of indirect inlay restorations cemented with preheated resin composites: an in vitro study

    by Engin Işık, Evrim Eliguzeloglu Dalkilic

    Background: Optimal marginal adaptation and adequate fracture strength are critical for the long-term clinical success of indirect posterior restorations. Preheated resin composites have been proposed as alternative luting agents; however, their effects on marginal integrity and mechanical performance of inlays remain unclear. This in vitro study aimed to evaluate gap formation and fracture strength of indirect inlay restorations cemented with preheated resin composites compared with a conventional resin cement. Methods: Forty human mandibular molar teeth were divided into four groups ( n = 10/group). Group 1 used a conventional dual-cure resin cement. Group 2 used a preheated resin composite. Group 3 used a preheated bulk-fill resin composite. Group 4 served as the intact tooth control group and received no cavity preparation or restoration. Standardized Class II MOD inlay preparations were performed, with the mesial proximal box floor located in enamel and the distal box floor located in dentin. Indirect restorations were fabricated from resin nano-ceramic blocks via computer-aided design and computer-aided manufacturing (CAD-CAM). All teeth underwent thermal cycling and chewing simulation. Marginal gap formation was analyzed using micro-computed tomography (micro-CT). Fracture strength was assessed using a universal testing machine, and fracture modes were classified. Data were analyzed using the Shapiro–Wilk test and Levene’s test, followed by one-way ANOVA and repeated measures ANOVA with Bonferroni correction and Tukey’s post hoc test, and the Fisher–Freeman–Halton test. Results: Enamel margin gap volumes were significantly higher in the preheated bulk-fill composite group compared with the conventional resin cement group ( p = 0.012), while no significant differences were observed at dentin margins ( p = 0.182). All restored groups exhibited significantly lower fracture strength values compared to the intact teeth group ( p = 0.003). Fracture mode distribution showed a tendency toward more repairable fractures in the preheated bulk-fill composite group and more irreparable fractures in the conventional resin cement group. Conclusions: Preheated resin composites showed comparable performance to conventional resin cement in terms of marginal adaptation and fracture strength. However, their performance appears to be material-dependent. Therefore, preheated resin composites may be considered as potential alternative luting materials for indirect restorations within the limitations of this study. Clinical relevance: Preheated resin-based composites are increasingly considered as alternative luting agents for indirect restorations. Understanding their influence on marginal adaptation and mechanical performance may assist clinicians in selecting appropriate cementation strategies for indirect inlay restorations.

  • Open Access

    The effectiveness of novel remineralising agents in white spot lesion treatment after microabrasion

    by Burcu Oglakci Ozkoc, Aysenur Tunc Dicle, Elif Alkan, Pınar Yılmaz Atalı, Evrim Eliguzeloglu Dalkilic, Dilek Tağtekin

    In clinical practice, microabrasion and remineralising agents, or their combinations, could be effective for white spot lesions (WSL) treatment. This study


  • Open Access

    Comparative effectiveness of remineralization agents on attachment-associated enamel demineralization in clear aligner patients: A 6-Month DIAGNOdent-Based controlled clinical trial

    by Hasan Yasin Ünal, Banu Kılıç, Evrim Eliguzeloglu Dalkilic

    Background/objectives: Clear aligner attachments increase the risk of white spot lesions (WSL), with a 35.5% incidence in adolescents. The number of anterior attachments is an independent risk factor (OR = 2.192). Despite 17 million patients treated worldwide, no study has quantitatively assessed demineralization around attachment margins. To compare the effectiveness of CPP-ACP, nano-hydroxyapatite (nHAp), and fluoride varnish versus a control for attachment-associated demineralization using DIAGNOdent monitoring. Methods: This prospective controlled clinical trial evaluated 52 patients; 45 were enrolled, and 40 completed after five pre-baseline withdrawals. Participants were allocated to four groups ( n = 10 each): Group A (control, fluoride toothpaste), Group B (CPP-ACP daily), Group C (nHAp professional + home gel), and Group D (fluoride varnish quarterly). DIAGNOdent measurements were taken around attachments at baseline, 1, 3, and 6 months. Linear mixed-effects models analyzed group differences ( p < 0.05). Results: All 40 participants completed the 6-month study (100% retention). Baseline values were comparable ( p = 0.48). Mean DIAGNOdent changes at 6 months were: Control + 4.35 [95%CI: 3.77–4.93], CPP-ACP − 4.02 [− 4.47 to − 3.56], nHAp − 5.36 [− 5.99 to − 4.72], Fluoride − 4.45 [− 4.78 to − 4.11]. The main group effect was significant ( p < 0.001; η² p = 0.974). All treatments outperformed the control ( p < 0.001). nHAp showed the greatest reduction, superior to CPP-ACP ( p < 0.001) and fluoride ( p = 0.019). Fluoride exhibited a biphasic pattern. Conclusions: All remineralization protocols significantly reduced demineralization versus control, with nHAp demonstrating the highest efficacy. Early preventive intervention and regular monitoring are recommended in attachment-bearing patients. Larger randomized trials are warranted. Trial registration: ClinicalTrials.gov NCT07229105. Registered 13 November 2025. Retrospectively registered.


  • Open Access

    Evaluation of the remineralisation effect and biocompatibility of boron-doped bioactive glass material on artificial root surface caries

    by Reyhan Fidan Spor, Belma Zengin Kurt, Ezgi Balkan, Evrim Eliguzeloglu Dalkilic, Abdurrahim Kocyigit

    Root surface caries, which frequently occur due to ageing and periodontal procedures, often require minimally invasive approaches, especially in molar teet


  • Evaluation of the Effect of Ozone Gas and Nanohydroxyapatite Gel Application on Remineralization of Initial Enamel Caries: An In Vitro Study

    by Merve Kocuk, Çağla Yeloğlu, Emre Barış Muhtar, Evrim Dalkılıç, Özlem Erçin, Funda Yanıkoğlu


  • Open Access

    Effect of the use of remineralization agents before resin infiltration on the treatment of initial enamel lesions: an in-vitro study

    by Bengü Doğu Kaya, Aybike Manav Özen, Pınar Yılmaz Atalı, Ayça Sarıalioğlu Güngör, Evrim Dalkılıç, Elif Alkan, Dilek Tağtekin, Cafer Türkmen

    Aim: This study aimed to evaluate the effect of the use of remineralization agents before the application of resin infiltration on the treatment of initial enamel lesions. Materials and methods: Eighty buccal enamel samples were prepared from human molars, and artificial initial lesions were formed after 96 h of incubation with a demineralizing solution. The samples were randomly divided into 8 groups (n = 10) including a remineralizing agent (Tooth Mousse, Medical Mineral Gel, Remin Pro), resin infiltration (ICON), and a combined treatment of both. Remineralizing agents were applied in pH cycle for 7 days. Baseline, demineralization, and after-treatment fluorescence (FluoreCam and DIAGNOdent Pen), surface microhardness (HMV-2T), surface roughness (M300C), OCT (Maestro-2) and ultrasonic system (Novascope 4500) data were obtained for all groups. The sample surfaces were examined under SEM/EDX (SU3500) at x1000. Data were statistically analyzed using the Two-Way Robust ANOVA and Bonferroni tests (p < 0.05). Results: There was no statistically significant difference between the groups for microhardness, roughness, OCT, DIAGNOdent Pen, ultrasound, and FluoreCam size/intensity values (p = 0.582; p = 0.963; p = 0.884; p = 0.923; p = 0.051; p = 0.268; p = 0.793 respectively). The effect of the treatment procedure showed a significant difference (p < 0.001), except for the roughness values (p = 0.984). The lowest Calcium (Ca) ratio (%atomic) was observed in the RI group in the EDX analysis. Conclusion: Remineralizing agents and resin infiltration methods may be used in combination or alone in the treatment of initial enamel lesions. Combining remineralizing agents with resin infiltration does not alter the efficacy of the treatment.


  • Open Access

    Akışkan bulk-fill ve akışkan geleneksel kompozitlerin farklı adeziv uygulama yöntemlerine göre mikrosızıntı skorlarının değerlendirilmesi

    by Sevda Öztürk Yeşi̇lIrmak, Burcu Oglakci̇, Zümrüt Ceren Özduman, Evrim Eli̇gÜzeloğlu Dalkiliç

    Amaç: Bu in vitro çalışmanın amacı, universal adeziv sistemin farklı uygulama yöntemlerinin sınıf V akışkan kompozit restosyonların kenar mikrosızıntısı üzerine etkilerinin değerlendirilmesidir. Gereç ve Yöntem: Bu çalışmada, toplam 60 adet sağlam premolar diş kullanıldı. Dişlerin bukkal yüzeylerine, servikal kenarı dentinde ve okluzal kenarı minede olacak şekilde standardize edilmiş Sınıf V kaviteler (3 mm x 3 mm x 1.5 mm) hazırlandı. Örnekler, kompozit rezin tipi (Filtek Z250/FZ, Metafil Bulk Fill/MB ve Nova Compo HF/NC) ve universal adezivin uygulama yöntemlerine göre (selektif etch/SEE ve self-etch/SE) rastgele 6 gruba ayrıldı: Grup FZ+SEE, Grup FZ+SE, Grup MB+SEE, Grup MB+SE, Grup NC+SEE, Grup NC+SE. Örnekler, 24 saat 37° C’de distile su içerisinde bekletildi ve 10.000 döngüde termal siklusa tabi tutuldu. Ardından, %0.5 metilen mavisi solüsyonunda 24 saat süresince bekletildi. Mikrosızıntı tespiti için, stereomikroskop altında (40x büyütme) incelendi. Verilerin istatistiksel analizinde, Kruskal Wallis ve Mann-Whitney U testleri kullanıldı (p<0.05). Bulgular: Okluzal kenarda, Grup MB+SE, Grup FZ+SE’ye göre ve Grup MB+SEE, Grup FZ+SEE’ye göre istatistiksel olarak daha düşük mikrosızıntı değeri gösterdi (p0.05). Grup NC+SE hariç, diğer tüm gruplarda servikal kenarda okluzal kenara göre istatistiksel olarak daha fazla mikrosızıntı değeri gözlendi (p<0.05). Sonuç: Universal adeziv sistemin her iki uygulama yöntemi kullanılarak elde edilen Sınıf V akışkan bulk-fill kompozit rezin restorasyonların, okluzal kenardaki mikrosızıntı performansının mikrohibrit kompozit rezinlere göre daha iyi olduğu tespit edilmiştir.


  • Effect of Different Polymerization Times on the Microhardness and Intrapulpal Temperature of Glass Ionomers

    by Zeynep Buket Kaynar, Evrim Eli̇gÜzeloğlu Dalkiliç, Nazmiye Dönmez, Mağrur KAZAK