CDClément Dixneuf

Clément Dixneuf

*This is an algorithmically generated author record based on publicly available information.

Clément Dixneuf has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Développement de sources laser à fibres en régime monofréquence, de très haute puissance et à très bas bruit d'intensité, émettant du proche infrarouge au visible

    by ClémEnt Dixneuf

    Les sources laser monofréquences de forte puissance continue, à bas bruit d’intensité et de fréquence, sont des outils métrologiques à fort potentiel pour des applications allant de la détection d’ondes gravitationnelles à la simulation quantique. Depuis quelques décennies, la technologie fibrée a permis une rapide montée en puissance des systèmes lasers autour de 1 μm, de part son excellente capacité à dissiper la chaleur résultant de ses dimensions avantageuses. Toutefois, la montée en puissance dans les amplificateurs à fibres est limitée par les effets non-linéaires, tels que la diffusion Brillouin stimulée dans le cas des lasers monofréquences. De plus, la qualité du profil spatial en limite de diffraction peut être impacté par des effets de seuil, comme les instabilités modales ou les effets de dégradation modale. Il est possible de déterminer le seuil d’apparition de ces effets en mesurant le bruit d’intensité relatif de ces lasers, qui ont un bruit proche du bruit de grenaille de la lumière aux hautes fréquences de Fourier, lorsqu’ils ne sont pas dégradés par d'autres phénomènes physiques. Un contrôle de ces propriétés, ainsi qu’une gestion thermique appropriée ont permis la mise en œuvre d’un amplificateur fibré délivrant 365 W de puissance (350 W après isolation optique), à l'état de l'art actuel des systèmes monofréquences à bas bruit d'intensité et de très haute puissance continue. Une boucle de rétroaction agissant sur les diodes de pompes de cet amplificateur a réduit le bruit d'intensité du laser au niveau du bruit de grenaille de la lumière sur une plage de fréquences allant de 2 kHz à 10 kHz. Afin de satisfaire d'autres champs d'application, ces sources de forte puissance continue peuvent également être doublées en fréquence via des configurations en simple passage dans des cristaux à fort coefficient non-linéaire. Ce procédé rend accessible la génération de longueurs d’ondes non atteignables via des milieux laser dopés aux ions de terres rares. Ces cristaux possèdent cependant des limitations thermiques, principalement liées à l’absorption des longueurs d’ondes du spectre visible, réduisant la puissance générée. L'utilisation d'une nouvelle architecture a rendu possible la génération de 17 W à 532 nm, avec une efficacité de conversion de plus de 36 % dans un cristal de PPsLT. Le fort niveau de puissance, couplé à l’efficacité de conversion élevée en simple passage a permis une étude du transfert du bruit d’intensité de l’onde infrarouge vers l’onde de seconde harmonique issue du doublage. Enfin, l'optimisation du bruit de fréquence des sources de type diodes laser ou lasers à fibres a été envisagée, via l'utilisation des propriétés des cavités laser Brillouin en anneau. Ces cavités non-résonnantes permettent de réduire de plusieurs ordres de grandeur le bruit de fréquence des sources laser et donc d’obtenir des lasers de puissance > 1W et dont les largeurs d'émission n’excèdent pas le kHz.

  • Neodymium laser-pumped ultra-low noise tunable Brillouin fiber laser around 920 nm

    by Roopa Prakash, Dia Darwich, Clément Dixneuf, Germain Guiraud, Nicholas Traynor, Kilian Le Corre, Thierry Robin, Raphaël Florentin, Mathieu Laroche, Andrea Bertoldi, et al.

    We have developed an ultra-low noise tunable Brillouin fiber laser exhibiting three orders of magnitude better frequency noise performance than the Neodymium-doped fiber laser pump and remarkable optical signal-to-noise ratio exceeding 80 dB suitable for immediate applications in coherent nonlinear conversion, quantum computing and underwater communications. In addition, we have implemented a custom optical phase-locked loop to ensure long-term stable operation and have investigated its impact on frequency noise. We demonstrate the power scalability of the single frequency (Hz-class) Brillouin laser, delivering over 500 mW with tunability across the 900 nm to 930 nm range in an all-fiber fully polarization-maintaining architecture.


  • High power ultralow-intensity noise continuous wave laser tunable from orange to red

    by Dia Darwich, Roopa Parakash, Clément Dixneuf, Yves-Vincent Bardin, Mathieu Goeppner, Germain Guiraud, Nicholas Traynor, Giorgio Santarelli, Adèle Hilico

    We report here on the development of a multi-Watt power tunable single frequency ultra-low noise laser system emitting around 620 nm. More than 5 W of output power is obtained between 616.5 nm and 630.8 nm using sum frequency generation of 1050 nm and 1550 nm tunable laser sources in a periodic poled lithium niobate crystal. The tunability is achieved through temperature and channel shift, and only limited by the crystal characteristics. An output power of 10.1 W and an optical-optical efficiency of 45% are reached at 624.5 nm. The relative intensity noise properties of the conversion process have been experimentally investigated in different configurations showing excellent agreement with the analytical prediction.


  • Ultralow-intensity noise, 10 W all-fiber single-frequency tunable laser system around 1550 nm

    by Dia Darwich, Yves-Vincent Bardin, Mathieu Goeppner, Clément Dixneuf, Germain Guiraud, Nicholas Traynor, Giorgio Santarelli, Adèle Hilico

    We report herein on the development of a linearly polarized, single-frequency tunable laser system producing more than 10 W in the 1550 nm range, using a two-stage erbium/ytterbium co-doped fiber-based master oscillator power amplifier (MOPA) architecture. The all-fiber MOPA provides an ultralow intensity noise of − 160 d B c / H z beyond 200 kHz between 1533 and 1571 nm ( Δ λ = 38 n m ) at full output power and a minimum optical signal to noise ratio of 38 dB. A good stability is obtained over 4 h at maximum power for several wavelengths with peak-to-peak fluctuation less than 3% and rms below 0.5%.


  • Robust 17 W single-pass second-harmonic-generation at 532 nm and relative-intensity-noise investigation

    by Clément Dixneuf, Germain Guiraud, Hanyu Ye, Yves-Vincent Bardin, Mathieu Goeppner, Giorgio Santarelli, Nicholas Traynor

    We demonstrate a 17 W single-frequency, low-intensity-noise green source at 532 nm, by single-pass second-harmonic generation of a 50 W continuous-wave fiber laser in a 30 mm MgO-doped periodically-poled stoichiometric lithium tantalate crystal. The maximum conversion efficiency is about 37%. A nearly Gaussian beam ( M 2 < 1.15 at 15 W) and low wavefront distortion are obtained. The system shows stable behavior over 100 h of uninterrupted operation. The evolution of the relative-intensity-noise transfer from the fundamental to the second harmonic is theoretically and experimentally investigated with high resolution.


  • Ultra-low intensity noise, all fiber 365 W linearly polarized single frequency laser at 1064 nm

    by Clément Dixneuf, Germain Guiraud, Yves-Vincent Bardin, Quentin Rosa, Mathieu Goeppner, Adèle Hilico, Christophe Pierre, Johan Boullet, Nicholas Traynor, Giorgio Santarelli

    We demonstrate a robust linearly polarized 365 W, very low amplitude noise, single frequency master oscillator power amplifier at 1064 nm. Power scaling was done through a custom large mode area fiber with a mode field diameter of 30 µm. No evidence of stimulated Brillouin scattering or modal instabilities are observed. The relative intensity noise is reduced down to −160 dBc/Hz between 2 kHz and 10 kHz via a wide band servo loop (1 MHz bandwidth). We achieve 350 W of isolated power, with a power stability < 0.7% RMS over 1100 hours of continuous operation and a near diffraction limited beam (M2 < 1.1).


  • 39 W narrow spectral linewidth monolithic ytterbium-doped fiber MOPA system operating at 976 nm

    by Nicolas Valero, Christophe Feral, Jéróme Lhermite, Stephane Petit, Romain Royon, Yves-Vincent Bardin, Mathieu Goeppner, Clément Dixneuf, Germain Guiraud, Antoine Proulx, et al.

    We report on a monolithic narrow spectral linewidth master oscillator power amplifier (MOPA) delivering up to 39 W around 976 nm with very high contrast. The amplifier is based on an ytterbium-doped large mode area (LMA) octagonal double clad (DC) active fiber with parameters optimized for long living three-level operation.


  • Robust All-Fiber 200W Single Frequency Laser at 1064 nm with Low Intensity Noise

    by C. Dixneuf, G. Guiraud, Y. V. Bardin, C. Pierre, J. Boullet, G. Santarelli, N. Traynor

    High power lasers are essential in various scientific applications, including cold atom trapping, frequency metrology or gravitational wave detection [1], where single frequency behaviour is required as well as low amplitude and frequency noise. Nevertheless, they can be useful in other industrial processes requiring good beam quality and low noise, like holography, interferometry or optical pumping of solid state lasers.


  • Multi-Watt Low Noise All-Fiber 997nm-1017nm Tunable Laser

    by B. Gouhier, C. Dixneuf, A. Hilico, G. Guiraud, N. Traynor, G. Santarelli

    Motivated by significant research efforts focused on overcoming technological challenges, fiber-based lasers are very convincing choices for numerous applications requiring high-power, low-noise laser light [1,2]. Using a master oscillator power amplifier (MOPA) architecture, it is also possible to achieve single-frequency (SF) operation at high power.


  • Low Intensity Noise High-Power Tunable Fiber-Based Laser Around 1007 nm

    by Benoit Gouhier, Clement Dixneuf, Adele Hilico, Germain Guiraud, Nicholas Traynor, Giorgio Santarelli

    We report the development of a tunable, low-noise, all-fiber, single-frequency, linearly polarized high-power master oscillator power amplifier operating over 20 nm, from 1017 nm down to 997 nm. Using Ytterbium highly-doped silica fiber with large mode area, more than 3 W of 997 nm signal was obtained with less than 2% of ASE. These figures keep improving with operating wavelength, to reach more than 16 W and 0.03% of ASE at 1017 nm. The optical signal to noise ratio exceeds 40 dB for the worst case up to more than 60 dB. In addition, relative intensity noise remains very low over the whole tuning range (-130 dBc@10 kHz) down to -160 dBc at 10 MHz. This robust laser has a strong potential to be a new workhorse for demanding applications in this spectral range.