S. A. Khainatskii
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
S. A. Khainatskii has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- L. Z. Boguslavskii
National Academy of Sciences of Ukraine
2 shared publications N. I. Kuskova
National Academy of Sciences of Ukraine
2 shared publicationsV. Yu. Baklar’
National Academy of Sciences of Ukraine
2 shared publicationsA. A. Smal’KO
National Academy of Sciences of Ukraine
1 shared publicationA. N. Shcherbak
National Academy of Sciences of Ukraine
1 shared publicationA. N. Yushchishina
National Academy of Sciences of Ukraine
1 shared publication
Latest Publications
- 1 July 2013
- Published by Allerton Press in Surface Engineering and Applied Electrochemistry
- Vol. 49 (4) , 296-299
The influence of the current pulse parameters on the development of a physical contact at metal pressure welding
The influence of the current pulse parameters on the development of the physical contact area between some connectable surfaces during welding of solid dissimilar metals has been studied and the results are presented in this work. Using a composite of steel 20 and copper M1 compressed by a pressure of about 50 MPa as an example, there is determined the most preferable range of the pulse current’s parameters: the current density amplitude with regard to the skin effect within the range from 1 × 109 to 2 × 109 A/m2 and the specific total energy of the treatment within the range from 0.6 × 109 to 1 × 109 J/m3, in which one can efficiently control the processes of the plastic deformation of the surfaces and, thus, control the formation of a butt welded joint.
- 1 July 2013
- Published by Allerton Press in Surface Engineering and Applied Electrochemistry
- Vol. 49 (4) , 296-299
The influence of the current pulse parameters on the development of a physical contact at metal pressure welding
The influence of the current pulse parameters on the development of the physical contact area between some connectable surfaces during welding of solid dissimilar metals has been studied and the results are presented in this work. Using a composite of steel 20 and copper M1 compressed by a pressure of about 50 MPa as an example, there is determined the most preferable range of the pulse current’s parameters: the current density amplitude with regard to the skin effect within the range from 1 × 109 to 2 × 109 A/m2 and the specific total energy of the treatment within the range from 0.6 × 109 to 1 × 109 J/m3, in which one can efficiently control the processes of the plastic deformation of the surfaces and, thus, control the formation of a butt welded joint.
- 1 October 2011
- Published by Allerton Press in Surface Engineering and Applied Electrochemistry
- Vol. 47 (5) , 456-464
Electric current treatment of liquid and crystallizing alloys in casting technologies
- 1 October 2011
- Published by Allerton Press in Surface Engineering and Applied Electrochemistry
- Vol. 47 (5) , 456-464
Electric current treatment of liquid and crystallizing alloys in casting technologies
- 1 October 2011
- Published by Allerton Press in Surface Engineering and Applied Electrochemistry
- Vol. 47 (5) , 433-440
Study of the possibility to synthesize nanocarbon at an electric discharge in solutions of organic acids. Part II: Results of the experimental investigation
It is established experimentally that a corona discharge is possible in aqueous solutions of weak electrolytes such as polybasic organic acids. There has been studied the effect of different factors on the amount of nanocarbon synthesized in the case of the electrodischarge processing of solutions of oxalic and citric acids.
- 1 October 2011
- Published by Allerton Press in Surface Engineering and Applied Electrochemistry
- Vol. 47 (5) , 433-440
Study of the possibility to synthesize nanocarbon at an electric discharge in solutions of organic acids. Part II: Results of the experimental investigation
It is established experimentally that a corona discharge is possible in aqueous solutions of weak electrolytes such as polybasic organic acids. There has been studied the effect of different factors on the amount of nanocarbon synthesized in the case of the electrodischarge processing of solutions of oxalic and citric acids.
- 1 August 2011
- Published by Allerton Press in Surface Engineering and Applied Electrochemistry
- Vol. 47 (4) , 356-361
Study of the possibility to synthesize nanocarbon at electric discharge in solutions of organic acids. Part I: Choosing the working fluid and generator parameters
The conditions necessary for performing a pulse corona discharge with a continuous plasma mass in a liquid containing carbon are determined. The organic compositions used as electrolytes have been chosen. There is proposed an approach to calculate the external controlled parameters of the pulse generator.
- 1 August 2011
- Published by Allerton Press in Surface Engineering and Applied Electrochemistry
- Vol. 47 (4) , 356-361
Study of the possibility to synthesize nanocarbon at electric discharge in solutions of organic acids. Part I: Choosing the working fluid and generator parameters
The conditions necessary for performing a pulse corona discharge with a continuous plasma mass in a liquid containing carbon are determined. The organic compositions used as electrolytes have been chosen. There is proposed an approach to calculate the external controlled parameters of the pulse generator.
- 1 August 2010
- Published by Allerton Press in Surface Engineering and Applied Electrochemistry
- Vol. 46 (4) , 304-308
Pressure effect upon the formation of the physical contact during welding metals in a solid state with the use of current pulses
By the example of the welding of heterogeneous metals of a Steel 20 + M1 Copper pair in the solid state with the use of current pulses, it is shown that the changes in the pressure within the range from 0.35 to 0.5 of the yield point of the less strong metal are more expedient. In this case, the level of the local microdeformations is found to make up from 40 to 50%, which provides a rather tight contact between the welding surfaces as applied in the studied method of welding. Thus, this allows us in the course of the further treatment to insulate them from the surrounding medium by the current and creates the possibility to obtain a welded junction without degassing or using a protective medium, which is confirmed by experimental testing.
- 1 August 2010
- Published by Allerton Press in Surface Engineering and Applied Electrochemistry
- Vol. 46 (4) , 304-308
Pressure effect upon the formation of the physical contact during welding metals in a solid state with the use of current pulses
By the example of the welding of heterogeneous metals of a Steel 20 + M1 Copper pair in the solid state with the use of current pulses, it is shown that the changes in the pressure within the range from 0.35 to 0.5 of the yield point of the less strong metal are more expedient. In this case, the level of the local microdeformations is found to make up from 40 to 50%, which provides a rather tight contact between the welding surfaces as applied in the studied method of welding. Thus, this allows us in the course of the further treatment to insulate them from the surrounding medium by the current and creates the possibility to obtain a welded junction without degassing or using a protective medium, which is confirmed by experimental testing.
- 1 June 2010
- Published by Allerton Press in Surface Engineering and Applied Electrochemistry
- Vol. 46 (3) , 230-234
On the equations of state for metals in the electric explosion models of conductors
An analytical wide-range equation of state for metals giving good agreement with the experimental results in the vast range of parameters of the state of matter is developed.
- 1 June 2010
- Published by Allerton Press in Surface Engineering and Applied Electrochemistry
- Vol. 46 (3) , 230-234
On the equations of state for metals in the electric explosion models of conductors
An analytical wide-range equation of state for metals giving good agreement with the experimental results in the vast range of parameters of the state of matter is developed.
- 1 June 2009
- Published by Allerton Press in Surface Engineering and Applied Electrochemistry
- Vol. 45 (3) , 186-192
On obtaining of ultrafine metal powders under electric explosion of conductors in a liquid. Part II: The optimum mode for the explosion of conductors in a liquid
The electric explosion of different metallic conductors in a liquid in the optimum mode has been experimentally studied. The conditions for the implementation of the optimum mode of the conductor explosion, when all the energy stored in the capacitor is injected into the conductor in the course of the first half-period of the discharge, have been determined. It has been found that the specific energy injected into the conductor in the optimum mode does not depend on the conductor sizes and circuit parameters. A correlation showing what amount of energy can be injected into the conductor in the process of its explosion in the optimum mode has been obtained. It has been shown that the size of the particles obtained in the process of the conductor explosion in the optimum mode only depends on the properties of the metal.
- 1 June 2009
- Published by Allerton Press in Surface Engineering and Applied Electrochemistry
- Vol. 45 (3) , 186-192
On obtaining of ultrafine metal powders under electric explosion of conductors in a liquid. Part II: The optimum mode for the explosion of conductors in a liquid
The electric explosion of different metallic conductors in a liquid in the optimum mode has been experimentally studied. The conditions for the implementation of the optimum mode of the conductor explosion, when all the energy stored in the capacitor is injected into the conductor in the course of the first half-period of the discharge, have been determined. It has been found that the specific energy injected into the conductor in the optimum mode does not depend on the conductor sizes and circuit parameters. A correlation showing what amount of energy can be injected into the conductor in the process of its explosion in the optimum mode has been obtained. It has been shown that the size of the particles obtained in the process of the conductor explosion in the optimum mode only depends on the properties of the metal.
- 1 April 2009
- Published by Pleiades Publishing Ltd in Technical Physics Letters
- Vol. 35 (4) , 299-301
Conditions for realization of an optimum regime of the electric explosion of conductors in liquid media
The conditions for achieving an optimum regime for the electric explosion of conductors in liquid media are determined, under which all the energy stored in a capacitor is introduced into a conductor within the first half-period of discharge. It is shown that the specific energy introduced into the conductor in the optimum regime depends only on the properties of the conductor material (metal). An equation is obtained that gives the amount of energy that can be introduced into a conductor during its explosion in the optimum regime.
- 1 April 2009
- Published by Pleiades Publishing Ltd in Technical Physics Letters
- Vol. 35 (4) , 299-301
Conditions for realization of an optimum regime of the electric explosion of conductors in liquid media
The conditions for achieving an optimum regime for the electric explosion of conductors in liquid media are determined, under which all the energy stored in a capacitor is introduced into a conductor within the first half-period of discharge. It is shown that the specific energy introduced into the conductor in the optimum regime depends only on the properties of the conductor material (metal). An equation is obtained that gives the amount of energy that can be introduced into a conductor during its explosion in the optimum regime.
- 1 February 2008
- Published by Allerton Press in Surface Engineering and Applied Electrochemistry
- Vol. 44 (1) , 36-42
On obtaining of ultrafine metal powders at electric explosion of conductors in liquid Part I. Peculiarities of explosion of conductors in liquid
The features of electric explosion and dispersion in a liquid of metallic conductors with their thermodynamic and electric parameters differing over a wide range were investigated. The experimental data analysis allowed selecting three pairs of metals being the closest in the obtained parameters of the explosion. It is obvious that the size of the obtained particles depends on the density of the energy injected into the conductor mass unit by the moment of explosion. A reverse dependence between the energy of the arc stage of the explosion and the size of the particles is found. The distribution of the obtained particles by size is more homogeneous than at the explosion of conductors in gases.
- 1 February 2008
- Published by Allerton Press in Surface Engineering and Applied Electrochemistry
- Vol. 44 (1) , 36-42
On obtaining of ultrafine metal powders at electric explosion of conductors in liquid Part I. Peculiarities of explosion of conductors in liquid
The features of electric explosion and dispersion in a liquid of metallic conductors with their thermodynamic and electric parameters differing over a wide range were investigated. The experimental data analysis allowed selecting three pairs of metals being the closest in the obtained parameters of the explosion. It is obvious that the size of the obtained particles depends on the density of the energy injected into the conductor mass unit by the moment of explosion. A reverse dependence between the energy of the arc stage of the explosion and the size of the particles is found. The distribution of the obtained particles by size is more homogeneous than at the explosion of conductors in gases.