Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shadai Lugo Loredo has a total of 94 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    No todo lo que llega es sargazo: la diversidad oculta de macroalgas en las playas del Caribe

    by Alena B. Kharissova, Deyani Nocedo-Mena, Sergio Manuel Salcedo-Martínez, Shadai Lugo-Loredo

    Cada año, miles de toneladas de algas marinas arriban a las costas del Caribe a causa del Gran Cinturón de Sargazo del Atlántico (GASB, por sus siglas en inglés), el mayor florecimiento de la macroalga de este tipo del mundo, de hasta 8,850 km y un peso que ronda las 22 toneladas. Dichas playas, usualmente adornadas sólo por arena blanca y aguas turquesas, ahora se ven cubiertas por densas pilas en descomposición de macroalgas color pardo, conocidas coloquialmente como “sargazo”.


  • Open Access

    Hybrid CuI@g-C3N4/MoS2 Thin Films for Energy Conversion Applications: A Photoelectrochemical Characterization

    by Daniel Arturo Acuña Leal, Claudia Rosa Santiago Ramírez, Norma A. Ramos Delgado, Sadasivan Shaji, Bindu Krishnan, David Avellaneda Avellaneda, Josue Amilcar Aguilar Martínez, Shadai Lugo Loredo, Arian Espinosa Roa, Miguel Ángel Gracia Pinilla

    In this work, we report the fabrication of CuI@g-C3N4/MoS2 thin films by the thermal evaporation of Cu films and their conversion into hybrid films by a simple wet chemical method. Compared to pure CuI, CuI@g-C3N4/MoS2 shows enhanced absorption near the UV region, which improves its DC photoconductivity. The conductivity of the films is enhanced by the addition of g-C3N4/MoS2, which is distributed on the surface of the CuI film. The band gap of the films red-shifts upon adding g-C3N4/MoS2. We evaluate this material’s potential application as a photodetector and in photocatalysis by evaluating its photoelectrochemical properties using impedance spectroscopy measurements, cyclic voltammetry, and DC photoresponse measurements. We find that upon the addition of g-C3N4/MoS2, the conductivity of the films is increased, as evidenced by the time-dependent photo amperometry measurements. Also, a higher DC photoresponse is observed upon increasing the concentration of MoS2. This work marks the first time a hybrid CuI@g-C3N4/MoS2 film and its photoelectrochemical characteristics have ever been reported.


  • Open Access

    Electrochemical Performance and Design Strategies of MXene-Based Supercapacitors

    by Gopi R.R., Amritha Kadathamana, Jithin Varghese, Shadai Lugo Loredo, Andrea Cerdán-Pasarán, Soorya Pushpan, J.A. Hernández-Magallanes, Sanal K.C.

    Supercapacitors, at the forefront of energy storage, bridge the gap between traditional capacitors and batteries, renowned for high power densities, rapid charge/discharge rates, and extended cycle life. MXenes, two-dimensional transition metal carbides, nitrides, and carbonitrides, have emerged as promising supercapacitor electrode materials due to remarkable electrical conductivity and tunable surface properties. This chapter explores MXene-based supercapacitors, detailing synthesis methods, electrochemical performance, and potential applications. MXene-based supercapacitor performance, covering specific capacitance, energy density, power density, and cycling stability, is discussed. The chapter also addresses challenges in MXene-based supercapacitor development, including scalability, cost-effectiveness, and long-term stability, applications in portable electronics, wearables, and electric transportation. Providing a comprehensive overview, this chapter inspires further exploration and utilization of MXene-based supercapacitors for next-gen energy storage solutions.


  • Open Access

    2D nanosheet SnS2 solution-processed photoanodes: Unveiling enhanced visible light absorption for solar fuels applications

    by Yudania Sánchez, Maxim Guc, Sara Martí-Sánchez, Maykel Jiménez-Guerra, Shadai Lugo-Loredo, Jordi Arbiol, Alejandro Perez-Rodriguez, Jordi Martorell, Carles Ros


  • Open Access

    Anodized TiO2 Nanotubes Sensitized with Selenium Doped CdS Nanoparticles for Solar Water Splitting

    by Julián Alfaro Chacón, Andrea Cerdán-Pasarán, Isaac Zarazúa, Lourdes Ramos-Galicia, J. A. Hernández-Magallanes, K. C. Sanal, Shadai Lugo Loredo, Juan Manuel Hernández-López

    In this research, TiO2 nanotubes (NTs) were produced by electrochemical anodization of a Ti substrate where different NH4F wt.% in the electrolyte was added. NTs with diameter of 65–90 nm and 3.3–4.9 µm length were obtained and sensitized with binary cadmium chalcogenides nanoparticles, CdS and CdSe, by successive ionic layer adsorption and reaction method (SILAR). Additionally, both anions S and Se were deposited onto Cd, labeled as CdSSe and CdSeS, to evaluate the effect of the deposition order of the anion from the precursor solution to form cadmium chalcogenides. The structural, optical, and electrochemical performance were analyzed through the SEM, XRD, XPS, UV-VIS, lineal voltammetry and chronoamperometry characterizations. The increase of NH4F wt.% from 1.5% to 4.5% produced a decrement of the diameter and length attributed to the fluoride ions concentration causing solubility of the NTs. XRD confirmed the TiO2 anatase and hexagonal CdS structures. From the EDS and XPS results, the presence of small amount of Se in the sensitized samples demonstrated the doping effect of Se instead of forming ternary semiconductor. With the sensitization of the TiO2 NTs with the nanoparticles, an improved hydrogen generation was observed (reaching 1.068 mL h−1 cm−2) in the sample with CdSSe. The improvement was associated to a synergetic effect in the light absorption and higher cadmium chalcogenide amount deposited when sulfur ions were deposited before selenium.


  • Open Access

    Safe Etching Route of Nb2SnC for the Synthesis of Two-Dimensional Nb2CTx MXene: An Electrode Material with Improved Electrochemical Performance

    by Karan Kishor Singh, Soorya Pushpan, Shadai Lugo Loredo, Andrea Cerdán-Pasarán, J. A. Hernández-Magallanes, K. C. Sanal

    In this study, low-temperature synthesis of a Nb2SnC non-MAX phase was carried out via solid-state reaction, and a novel approach was introduced to synthesize 2D Nb2CTx MXenes through selective etching of Sn from Nb2SnC using mild phosphoric acid. Our work provides valuable insights into the field of 2D MXenes and their potential for energy storage applications. Various techniques, including XRD, SEM, TEM, EDS, and XPS, were used to characterize the samples and determine their crystal structures and chemical compositions. SEM images revealed a two-dimensional layered structure of Nb2CTx, which is consistent with the expected morphology of MXenes. The synthesized Nb2CTx showed a high specific capacitance of 502.97 Fg−1 at 1 Ag−1, demonstrating its potential for high-performance energy storage applications. The approach used in this study is low-cost and could lead to the development of new energy storage materials. Our study contributes to the field by introducing a unique method to synthesize 2D Nb2CTx MXenes and highlights its potential for practical applications.


  • Open Access

    Energy and Exergy Analysis of a Modified Absorption Heat Pump (MAHP) to Produce Electrical Energy and Revaluated Heat

    by Javier Alejandro Hernández-Magallanes, L. A. Domínguez-Inzunza, Shadai Lugo-Loredo, K. C. Sanal, Andrea Cerdán-Pasarán, Salvador Tututi-Avila, L. I. Morales

    The novel modified absorption heat pump (MAHP) with the H2O-LiBr working mixture for cogeneration applications is introduced. The MAHP can simultaneously produce electric energy and heat revaluation. The proposed system has the particularity that it can be powered by alternative thermal sources (such as solar energy, biomass, geothermal) or industrial waste heat, thus promoting the production and efficient use of clean energy. The effects of pressure ratio (RP), source or supply temperature (TGH), and the energy revaluation gradient (GTL) are analyzed. The critical parameters of the proposed system are evaluated, including thermal efficiency (ηTh), exergetic efficiency (ηEx), revaluated heat (Q˙A), as well as net power produced (˙Wnet). For the MAHP analysis, RP and TGH operating ranges were chosen at 1.1–15.0 and 100–160 °C, respectively. The results show that ηEx of 87% can be obtained, having the maximum performance in TGH of 120 °C, RP of 1.1, and GTL of 35 °C. The ηTh varies between 51% and 55%, having a maximum GTL of 45 °C. On the other hand, ˙Wnet achieves values between 260 and 582 kW, depending on the defined operating conditions.


  • Effect of Aminosilane Nanoparticle Coating on Structural and Magnetic Properties and Cell Viability in Human Cancer Cell Lines

    by Israel Alejandro Flores Urquizo, Tomás Constantino Hernández García, Shadai Lugo Loredo, José Trinidad Elizalde Galindo, Perla Elvia García Casillas, Jazmín Cristina Stevens Barrón, Christian Chapa González

    Magnetic nanoparticle interfaces have aroused great scientific research interest in the biomedical area since the interaction of cells or biomolecules with nanoparticles is determined by the surface properties. Currently, in medical applications, there is a need to study cell interaction and growth, along with changes in structural or magnetic properties, attributed to nanoparticle coatings. In this study the coercive field changes in NixFe3‐xO4 nanoparticles (x = 0.0, 0.2, 0.4, 0.6, 0.8, and 1.0) driven by partial or total substitution of Fe2+ content by Ni2+, and by aminosilane coating are evaluated. The nanoparticles are synthesized by the coprecipitation method. The inverse spinel structure is confirmed by X‐ray diffraction results and Raman spectra. The aminosilane coating is confirmed by energy‐dispersive X‐ray spectroscopy and Fourier transform infrared spectroscopy. Dynamic light scattering confirms a mean hydrodynamic size of 10 nm. Scanning electron microscopy micrographs of the uncoated and aminosilane‐coated samples show that the particles have a hemispherical shape. The coating increases the coercive field. In addition, uncoated Ni0.2Fe2.8O4 has the highest viability in both MCF7 and HeLa cell lines, and aminosilane coating decreases cell viability. This study contributes to future applications of nanomedicine, such as hyperthermia and drug delivery.


  • Redox-active anomalous electrochemical performance of mesoporous nickel manganese sulfide nanomaterial as an anode material for supercapattery devices

    by Mian Muhammad Faisal, Syeda Ramsha Ali, Syed Shaheen Shah, Muhammad Waqas Iqbal, Soorya Pushpan, Md. Abdul Aziz, Nayely Pineda Aguilar, Mónica María Alcalá Rodríguez, Shadai Lugo Loredo, K.C. Sanal