ISIhor Shepelenko

Ihor Shepelenko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ihor Shepelenko has a total of 77 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Technological Control of Tubular Workpiece Forming During Deforming Broaching

    by Vasyl Lozynskyi, Yakiv Nemyrovskyi, Valentyn Otamanskyi, Ihor Shepelenko, Oleksandr Melnyk, Vasyl Levchenko, Liubomyr Ropyak

    Plastic forming of the workpiece is a key quality indicator during deforming broaching. This study aims at technological control over workpiece forming by establishing a relationship with technological factors, including broaching modes: interference, tool geometry, and workpiece wall thickness. The research methods used included numerical simulation of the deformation process and the stress–strain state of a plastic steel workpiece. The constructed simulation models allowed tracking stress and strain evolution on the inner and outer surfaces, revealing their differences. The approach’s originality lies in establishing the key influence of critical contact pressure in the deformation zone on strain state changes. Its appearance is influenced by interference, tool geometry, and workpiece wall thickness. Circumferential strain depends solely on interference and workpiece wall thickness, remaining independent of the angle, α. A relationship is provided to determine the interference ensuring the outer dimension. The calculation method for determining the processed hole diameter was improved, considering the real deformation zone scheme, simulation results, and elastic recovery. The relationship between the processed hole diameter, broaching modes, and workpiece wall thickness has been established. It is necessary to set the angle that ensures the absence of axial strain. A technological control scheme for forming is developed, and an application example is provided.

  • Open Access

    Improving the efficiency of fault-finding work during camshaft repairs

    by Ihor Shepelenko, Artem Krasota, Mykhailo Krasota, Ivan Vasylenko, Andrey Solovuch

    The object of this research is the process of inspecting the camshafts of internal combustion engines in the context of vehicle repair production. As the inspection of a camshaft is a highly labor-intensive process due to the need to measure a large number of its components, there is a pressing need to improve the efficiency of inspection work. An approach is proposed for inspecting components with multiple worn surfaces, which involves determining the wear on one surface and calculating the wear on another using a regression model that establishes a quantitative relationship between the wear on the surfaces. This allows for a significant reduction in the labor intensity of defect detection work without compromising the reliability of the technical condition assessment of the component. This approach has been implemented using the example of defect detection on the camshaft of a KamAZ lorry engine. A hierarchical diagram of the camshaft structure as a system, where its individual elements are subsystems, is examined. It is noted that, among the surfaces of the camshaft, the cams and journal necks are subject to the most intense wear. A statistical model of camshaft wear has been constructed in the form of a linear regression equation, establishing a quantitative relationship between the wear of the journal necks and the cams. The practical significance of the proposed approach lies in improving the efficiency of defect detection work by reducing the volume of measurements by a factor of 2.6, which reduces the labor intensity of defect detection by 40%. When inspecting a batch of 100 camshafts, this results in a saving of 3,200 measurements, or over 36 hours. The results of this research have practical significance and are important for automotive repair enterprises engaged in the repair of internal combustion engine components.

  • Open Access

    Justification of the microcutting scheme in the friction-mechanical method of applying anti-friction coatings

    by I.V. Shepelenko, Ya.B. Nemyrovskyi, M.I. Chernovol, M.V. Krasota, I.F. Vasylenko

    A review of modern approaches to substantiating the patterns of anti-friction coating formation during friction-mechanical application has made it possible to establish the importance of ensuring favourable conditions for microcutting of anti-friction material. Creating these conditions requires studying the interaction scheme of microirregularities in the contact zone between the tool and the part. From the point of view of cutting mechanics, a scheme of interaction of a single micro-irregularity, which is a model – a cutter made of 200 gray cast iron, with a contact surface made of anti-friction material – brass L63, was constructed, which made it possible to establish physical changes in the tool and machined surface system. The value of the front cutting angle has been theoretically established to ensure maximum efficiency of the microcutting process and filling of microcavities between microirregularities. The use of a model experiment, the method of similarity and dimensions made it possible to confirm the main theoretical regularities obtained using characteristic microcutting diagrams. It has been shown that the process of changing the geometry of the micro-irregularity vertex occurs in accordance with the principle of adaptability of the entire ‘tool-part’ system, according to which the minimum micro-cutting energy is realised. The results obtained are an important reserve for improving the quality of anti-friction coating application by the friction-mechanical method

  • Theoretical Calculation and Study of the Stress State of an Anti-friction Coating Applied to the Working Surface of a Camshaft Cam

    by Ihor Shepelenko, Artem Krasota, Vasiliy Gutsul, Mykhailo Krasota

    The presented studies are devoted to establishing the main patterns of stress state changes in the contact zone of the camshaft cam, the working surface of which is coated with an anti-friction coating. A method for studying the stress state of the cam working surface is proposed, which consists in selecting a calculation scheme that takes into account the operating conditions of the “cam-follower” connection, obtaining analytical dependencies for determining stresses in the contact zone, and their graphical interpretation to establish the main patterns. For the analytical study of the patterns of stress in the contact zone, the method of elasticity theory was used to solve contact problems. In this case, it was assumed that the cam and follower contact each other on a rectangular area. This made it possible to establish the main dependencies for determining the stress state in the studied zone. The calculation of circumferential and axial stresses made it possible to construct diagrams of their distribution for a cam with an anti-friction coating, as well as without an anti-friction coating. To analyze the causes of stress concentration peaks at the boundaries of the contact areas, calculations were made of the stress state of the cam surface, which is subjected only to friction stresses in the contact zone. Calculations of the stress state of the working surface of the camshaft of a KamAZ truck engine showed that compressive stresses arise in the circumferential direction, with their maximum reaching the central zone of the contact area. Tensile stresses are created at the edges of the contact area. It has been established that contact friction forces contribute to the appearance of stress peaks, the magnitude of which is related to the design features of the cam-follower friction pair of the camshaft. The calculations confirm the feasibility of using anti-friction coatings on the surfaces of camshaft cams. Applying such FANT coatings reduces stresses by 47% in the circumferential direction and 34% in the longitudinal direction, thereby reducing cam wear.

  • Increasing the Efficiency of Vehicle Maintenance and Repair using Information Technology

    by Mykhailo Krasota, Igor Shepelenko, Yuriy Kuleshkov, Ruslan Osin, Timofii Rudenko, Volodymyr Petlenko

    Mykhailo Krasota, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of Department of Exploitation and Repairing Machines, Central Ukrainian National Technical University, Kropyvnytskyi, Ukraine, https://orcid.org/0000-0001-8791-3264, e-mail: krasotamv@ukr.net. Igor Shepelenko, Professor, Doctor of Technical Sciences, Professor of Department of Exploitation and Repairing Machines, Central Ukrainian National Technical University, Kropyvnytskyi, Ukraine, ORCID: https://orcid.org/0000-0003-1251-1687, e-mail: kntucpfzk@gmail.com. Yuriy Kuleshkov, Professor, Doctor of Technical Sciences, Professor of Department of Exploitation and Repairing Machines, Central Ukrainian National Technical University, Kropyvnytskyi, Ukraine, ORCID: https://orcid.org/0000-0001-6492-6919, e-mail: kul090455@gmail.com Ruslan Osin, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of Department of Exploitation and Repairing Machines, Central Ukrainian National Technical University, Kropyvnytskyi, Ukraine, https://orcid.org/0000-0002-8927-5363, e-mail: ruslan_osin@ukr.net Timofii Rudenko, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of Department of Exploitation and Repairing Machines, Central Ukrainian National Technical University, Kropyvnytskyi, Ukraine, ORCID: https://orcid.org/0000-0001-6879-7624, e-mail: r-t-v@mail.ua Volodymyr Petlenko, PhD Student in Automobile Transport, Central Ukrainian National Technical University, Kropyvnytskyi, Ukraine, ORCID: https://orcid.org/0009-0009-4006-3202 е-mail: Tpetlenko@ukr.net The relevance of the conducted research is determined by the fact that the main objective of improving the system of technical maintenance and repair of automobiles is planning various types of work and monitoring their efficiency using information technologies. The purpose of this work is to increase the efficiency of technological processes of automobile maintenance and repair through the use of information technologies at automotive service and transport enterprises. The analysis of the order and content of work in the current activities of engineering and technical services of technical service enterprises made it possible to identify information for input data entry, form a processing algorithm, and obtain the necessary data for current and strategic planning. Proposals are provided for organizing an information management system at the enterprise during the execution of technical maintenance and repair of automobiles. It is proposed to create proprietary databases for serviced vehicles, which should include information about the vehicles as well as recording time standards for technological operations of maintenance and repair. The use of an information system for management and activity planning at enterprises of technical service for transport and technological machines will increase productivity and quality of work performance, strengthen control over personnel activities, as well as the use of rolling stock.

  • Simulation of the Forming Scheme During Deforming Broaching of Parts with Through Deformation

    by Yakiv Nemyrovskyi, Valentyn Otamanskyi, Ihor Shepelenko, Oleksandr Melnyk, Yaroslav Stepchyn

  • Modelling the Stress State of the Camshaft Cam of a Car Engine

    by Artem Krasota, Ihor Shepelenko, Mykhailo Krasota, Oleksandr Lizunkov, Ruslan Osin

  • Selection of Protective Coating Technology

    by Ihor Shepelenko, Evhen Solovykh, Volodymyr Shumliakivsky, Stanislav Katerynych, Andrey Solovuch

  • Substantiation of the Design of a Device for Machining Camshaft Cams by the Friction-Mechanical Method

    by Ihor Shepelenko, Artem Krasota, Vasiliy Gutsul, Mykhailo Krasota

    Ihor Shepelenko, Professor, Doctor of Technical Science, professor of the Department of Exploitation and repairing machines, Central Ukrainian National Technical University, Kropyvnytskyi, Ukraine, https://orcid.org/0000-0003-1251-1687, e-mail: kntucpfzk@gmail.com Artem Krasota, PhD student in Industrial Engineering, Central Ukrainian National Technical University, Kropyvnytskyi, Ukraine, ORCID: https://orcid.org/0009-0007-7700-9176, e-mail: kras.365@gmail.com Vasiliy Gutsul, Associate Professor, Candidate of Technical Sciences, Associate Professor of the Department of Higher Mathematics and Physics, Central Ukrainian National Technical University, Kropyvnytskyi, Ukraine, ORCID: https://orcid.org/0000-0003-4155-5355, e-mail: vigutsul@ukr.net Mykhailo Krasota, Associate Professor, Candidate of Technical Sciences, associate professor of the Department of Exploitation and repairing machines, Central Ukrainian National Technical University, Kropyvnytskyi, Ukraine, ORCID: https://orcid.org/0000-0001-8791-3264, e-mail: krasotamv@ukr.net An analysis of traditional friction-mechanical antifriction coating application schemes, as well as devices for their implementation, have shown their effectiveness in treating surfaces of parts with the shape of a body of revolution. However, for machining complex profile surfaces, which include camshaft cams, the use of such schemes is unacceptable due to the lack of stable contact between the tool and the part. The aim of the presented work is to substantiate the design and develop a device for finishing antifriction non-abrasive machining of camshaft cams by friction-mechanical method. The ways to achieve the goal are determined - to provide the necessary trajectory of movement of the tool or part, which copies the shape of the cam and creates the necessary conditions for the qualitative implementation of the selective transfer of antifriction material to the working surface of the part. This can be achieved through the use of a lever-type tool loading scheme that ensures a constant tool pressure force on the cam surface, taking into account its geometry. The proposed approach made it possible to develop the design of a device for applying antifriction coatings with a finishing antifriction non-abrasive treatment to the working surface of camshaft cams. Another approach to solving this problem is to use the design of a device containing copying and rubbing units. The presence of copiers in the proposed device ensures the creation of reciprocating and rotational movement of the tool along a trajectory corresponding to the shape of the cam with the required stable force. The justification of the device designs allows us to assert the possibility of providing high-quality conditions for the finishing antifriction non-abrasive machining of camshaft cams. Experimental studies that require the manufacture of the device and testing in laboratory or production conditions will allow you to choose the most effective design from the two options.


  • Changing the Stress-strain State of the Working Surface of a Part with an Antifriction Coating

    by Ihor Shepelenko, Artem Krasota, Mykhailo Krasota

    Igor Shepelenko, Professor, Doctor in Technics (Doctor of Technic Sciences), Central Ukraіnian National Technical University, Kropyvnytskyi, Ukraine, e-mail: kntucpfzk@gmail.com, ORCID ID: 0000-0003-1251-1687 Artem Krasota, post-graduate, Центральноукраїнський національний технічний університет, м. Кропивницький, Україна Mykhailo Krasota, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Central Ukraіnian National Technical University, Kropyvnytskyi, Ukraine, e-mail: krasotamv@ukr.net, ORCID ID: 0000-0001-6879-7624 The article deals with the issue of increasing the durability of the camshaft of an internal combustion engine by improving the operational properties of cams. It is determined that by studying the stress-strain state of individual elements of a part, it is possible to solve a number of technological problems. Taking into account that in most cases the destruction of a part begins from its surface, the stress-strain state of the surface layer has a significant impact on the operational properties of parts. The study of the parameters of the stress-strain state on the working surface of the cam of the camshaft of an internal combustion engine was carried out by modelling using the finite element method. The model takes into account the design features of the camshaft, the operating conditions of the cam-pusher connection, and the forces acting in the gas distribution mechanism at the moment of valve opening. To adequately reproduce the loads in the details of the studied assembly, a finite element model of the camshaft was created, with the camshaft journals in contact with the bushings and the cams in contact with one of the pushrods. The calculation results confirmed that it is in the cam-pusher contact zone that the maximum stress values are observed. To determine the ways to improve the operational properties of the working surfaces of cams, the parameters of the stress-strain state of the base cam and the cam with an antifriction coating applied by finishing antifriction non-abrasive treatment were investigated. It was found that the maximum stress is about 60 MPa for the uncoated cam and about 37 MPa for the cams with antifriction coatings. In addition, a change in the shape of the diagram was recorded: in the cams with antifriction coatings, the stresses are more evenly applied in the contact patch. The improvement in the stress state of the cams can be explained by the presence of an antifriction coating, which reduces not only the friction coefficient but also serves as a solid lubricant. The obtained regularities allow us to assert the expediency of finishing antifriction non-abrasive treatment of cams when solving the issue of increasing the durability of the camshaft.