Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shankar Dutt has a total of 115 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Anisotropic fine structure of ion tracks in single crystals

    by Jessica Wierbik, Hendrik Heimes, Christian Notthoff, Shankar Dutt, Taleb Alwadi, Alexander Kiy, Pablo Mota-Santiago, Nigel Kirby, Patrick Kluth


  • Open Access

    Solid-state nanopore sensing reveals conformational changes induced by a mutation in a neuron-specific tRNAArg

    by Shankar Dutt, Lien B Lai, Rahul Mehta, Buddini I Karawdeniya, Y M Nuwan D Y Bandara, Andrew J Clulow, Sebastian Glatt, Venkat Gopalan, Patrick Kluth

    We demonstrate that solid-state nanopore sensing is a powerful single-molecule method for analyzing RNA conformational ensembles. As a model, we employed n-Tr20, a neuron-specific cytoplasmic tRNA$_{\mathrm{UCU}}^{\mathrm{Arg}}$, whose C50U mutation is associated with neurodegeneration in C57BL/6J mice. Maturation of the n-Tr20$^{\mathrm{C50U}}$ precursor is impaired as the mutation stabilizes a conformational ensemble different from the wild type. To gain insights into how this mutation engenders structural differences, we used solid-state nanopore sensing for the real-time identification of metastable conformers that are not easily observable by ensemble methods. Ion-current traces recorded using an 8 nm nanopore revealed broad contours of the conformational landscape of n-Tr20/n-Tr20$^\mathrm{C50U}$ $\pm$ Mg$^{2+}$. Additionally, cryo-electron microscopy analysis and small-angle X-ray scattering studies revealed structural plasticity consistent with the nanopore-sensing data. Since dynamics undergird RNA (dys)function in cellular physiology and pathology, nanopore sensing to determine RNA conformational sampling is a valuable addition to the growing RNA structural analysis toolkit.


  • Charge-Based Molecular Separation Using Conical Nanopores in SiO 2 Membranes

    by Nahid Afrin, Shankar Dutt, Alexander Kiy, Vincent Craig, Maria Eugenia Toimil-Molares, Patrick Kluth

  • Open Access

    Characterization of ion track-etched conical nanopores in thermal and PECVD SiO2 using small angle X-ray scattering

    by Shankar Dutt, Rudradeep Chakraborty, Christian Notthoff, Pablo Mota-Santiago, Christina Trautmann, Patrick Kluth

    Conical nanopores in amorphous SiO2 thin films fabricated using the ion track etching technique show promising potential for filtration, sensing, and nanofluidic applications. The characterization of the pore morphology and size distribution, along with its dependence on the material properties and fabrication parameters, is crucial to designing nanopore systems for specific applications. Here, we present a comprehensive study of track-etched nanopores in thermal and plasma-enhanced chemical vapor-deposited (PECVD) SiO2 using synchrotron-based small-angle X-ray scattering (SAXS). The nanopores were fabricated by irradiating the samples with 89 MeV, 185 MeV, and 1.6 GeV Au ions, followed by hydrofluoric acid etching. We present a new approach for analyzing the complex highly anisotropic two-dimensional SAXS patterns of the pores by reducing the analysis to two orthogonal one-dimensional slices of the data. The simultaneous fit of the data enables an accurate determination of the pore geometry and size distribution. The analysis reveals substantial differences between the nanopores in thermal and PECVD SiO2. The track-to-bulk etching rate ratio is significantly different for the two materials, producing nanopores with cone angles that differ by almost a factor of two. Furthermore, thermal SiO2 exhibits an exceptionally narrow size distribution of only 2–4%, while PECVD SiO2 shows a higher variation ranging from 8% to 18%. The impact of different ion energies on the size of the nanopores was also investigated for pores in PECVD SiO2 and shows only negligible influence. These findings provide crucial insights for the controlled fabrication of conical nanopores in different materials, which is essential for optimizing membrane performance in applications that require precise pore geometry.


  • Open Access

    Charge-based molecular separation using conical nanopores in SiO2 membranes

    by Nahid Afrin, Shankar Dutt, Alexander Kiy, Vincent Craig, Maria Eugenia Toimil-Molares, Patrick Kluth

    Membrane-based charge selective separation is emerging as an excellent platform for separating biomolecules and nanoparticles. For efficient charge-selective molecular separation, thin membranes with a well-defined surface charge and a narrow pore size distribution are desirable. This work demonstrates the application of uniform conical nanopores in a SiO2 membrane as a cutting-edge charge-based molecular separation platform. The conical nanopores were fabricated using the ion-track etching technique. The native negative surface charge of the SiO2 membrane can be altered to a positive charge by attaching an aminosilane moiety. Our separation experiments demonstrate excellent separation efficiencies of molecules based on their charges. Negatively charged nanopore membranes transport positive molecules up to 48 times more efficiently than negative molecules. In contrast, positively charged membranes transport negative molecules approximately 15 times more efficiently than positive ones. Furthermore, these membranes demonstrate effective charge-based molecular separation capabilities, successfully isolating specific molecule types from mixed solutions.

  • Open Access

    Solid-state nanopore sensing reveals conformational changes induced by a mutation in a neuron-specific tRNA Arg

    by Shankar Dutt, Lien B. Lai, Rahul Mehta, Buddini I. Karawdeniya, Y.M. Nuwan D.Y. Bandara, Andrew J. Clulow, Sebastian Glatt, Venkat Gopalan, Patrick Kluth

    We demonstrate that solid-state nanopore sensing is a powerful single-molecule method for analyzing RNA conformational ensembles. As a model, we employed n-Tr20, a neuron-specific cytoplasmic tRNA Arg UCU , whose C50U mutation is associated with neurodegeneration in C57BL/6J mice. Maturation of the Tr20 C50U precursor is impaired as the mutation stabilizes a conformational ensemble different from the wild-type. To gain insights into how this mutation engenders structural differences, we used solid-state nanopore sensing for the real-time identification of metastable conformers that are not easily observable by ensemble methods. Ion-current traces recorded using an 8-nm nanopore revealed broad contours of the conformational landscape of n-Tr20/n-Tr20 C50U ± Mg 2+ . Additionally, cryo-EM analysis and small-angle X-ray scattering studies revealed structural plasticity even more than predicted from the nanopore-sensing data. Since dynamics undergird RNA (dys)function in cellular physiology and pathology, nanopore sensing to determine RNA conformational sampling is a valuable addition to the growing RNA structural analysis toolkit. Graphical

  • Open Access

    Characterization of ion track etched conical nanopores in thermal and PECVD SiO$_{2}$ using small angle X-ray scattering

    by Shankar Dutt, Rudradeep Chakraborty, Christian Notthoff, Pablo Mota-Santiago, Christina Trautmann, Patrick Kluth

    Conical nanopores in amorphous SiO$_{2}$ thin films fabricated using the ion track etching technique show promising potential for filtration, sensing and nanofluidic applications. The characterization of the pore morphology and size distribution, along with its dependence on the material properties and fabrication parameters, is crucial to designing nanopore systems for specific applications. Here, we present a comprehensive study of track-etched nanopores in thermal and plasma-enhanced chemical vapor deposited (PECVD) SiO$_{2}$ using synchrotron-based small-angle X-ray scattering (SAXS). We present a new approach for analyzing the complex highly anisotropic 2-dimensional SAXS patterns of the pores by reducing the analysis to two orthogonal 1-dimensional slices of the data. The simultaneous fit of the data enables an accurate determination of the pore geometry and size distribution. The analysis reveals substantial differences between the nanopores in thermal and PECVD SiO$_{2}$. The track-to-bulk etching rate ratio is significantly different for the two materials, producing nanopores with cone angles that differ by almost a factor of 2. Furthermore, thermal SiO$_2$ exhibits an exceptionally narrow size distribution of only ~2-4%, while PECVD SiO$_2$ shows a higher variation ranging from ~8-18%. The impact of ion energy between 89 MeV and 1.6 GeV on the size of the nanopores was also investigated for pores in PECVD SiO$_{2}$ and shows only negligible influence. These findings provide crucial insights for the controlled fabrication of conical nanopores in different materials, which is essential for optimizing membrane performance in applications that require precise pore geometry.

  • The Effect of Electrolyte Properties on Ionic Transport through Solid-State Nanopores: Experiment and Simulation

    by Alexander Kiy, Shankar Dutt, Kasimir P. Gregory, Christian Notthoff, Maria Eugenia Toimil-Molares, Patrick Kluth

    Nanopore membranes enable versatile technologies that are employed in many different applications, ranging from clean energy generation to filtration and sensing. Improving the performance can be achieved by conducting numerical simulations of the system, for example, by studying how the nanopore geometry or surface properties change the ionic transport behavior or fluid dynamics of the system. A widely employed tool for numerical simulations is finite element analysis (FEA) using software, such as COMSOL Multiphysics. We found that the prevalent method of implementing the electrolyte in the FEA can diverge significantly from physically accurate values. It is often assumed that salt molecules fully dissociate, and the effect of the temperature is neglected. Furthermore, values for the diffusion coefficients of the ions, as well as permittivity, density, and viscosity of the fluid, are assumed to be their bulk values at infinite dilution. By performing conductometry experiments with an amorphous SiO2 nanopore membrane with conical pores and simulating the pore system with FEA, it is shown that the common assumptions do not hold for different mono- and divalent chlorides (LiCl, NaCl, KCl, MgCl2, and CaCl2) at concentrations above 100 mM. Instead, a procedure is presented where all parameters are implemented based on the type of salt and concentration. This modification to the common approach improves the accuracy of the numerical simulations and thus provides a more comprehensive insight into ion transport in nanopores that is otherwise lacking.


  • Nanopore Fabrication Made Easy: A Portable, Affordable Microcontroller-Assisted Approach for Tailored Pore Formation via Controlled Breakdown

    by Y. M. Nuwan. D. Y. Bandara, Buddini I. Karawdeniya, Shankar Dutt, Patrick Kluth, Antonio Tricoli

    With growing interest in solid-state nanopore sensing-a single-molecule technique capable of profiling a host of analyte classes-establishing facile and scalable approaches for fabricating molecular-size pores is becoming increasingly important. The introduction of nanopore fabrication by controlled breakdown (CBD) has transformed the economics and accessibility of nanopore fabrication. Here, we introduce the design of an Arduino-based, portable USB-powered CBD device, with an estimated cost of <150 USD, which is approximate to 10-100x cheaper than most commercial solutions, capable of fabricating single nanopores conducive for single molecule sensing experiments. We demonstrate the facile fabrication of 60 tailored nanopores (similar to 2.6-12.6 nm) with similar to 80% of the pores within 1 nm of the target diameter. Selected pores were then tested with double-stranded DNA, the canonical molecular ruler, demonstrating their performance for single-molecule sensing applications. The device is constructed with off-the-shelf readily available components and controlled using a highly customizable MATLAB application, which has capabilities encompassing pore fabrication, pore enlargement, and current-voltage acquisition for pore size estimation. When combined with a portable amplifier, this device also provides a fully portable sensing platform, an important step toward portable solid-state nanopore sensing applications.