Luca Cassano
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Luca Cassano has a total of 103 co-authors. Here are the top co-authors by number of shared publications:
- Cinzia Bernardeschi
University of Pisa, Pisa, Italy
14 shared publications - Andrea Domenici
University of Pisa
12 shared publications - Cristiana Bolchini
Dipartimento di Elettronica, Informazione e Bioingegneria, Politecnico di Milano, Milan, Italy
12 shared publications - Antonio Miele
Dipartimento di Elettronica, Informazione e Bioingegneria, Politecnico di Milano, Milan, Italy
10 shared publications - Luca Sterpone
Dipartimento di Automatica e Informatica, Politecnico di Torino, Torino, Italy
6 shared publications - Marco Ottavi
Faculty of EEMCS, University of Twente, Enschede, The Netherlands
4 shared publications
Latest Publications
- Open Access
- 9 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
- Vol. 45 (1) , 418-427
Benchmark Suite for Resilience Assessment of Deep Learning Models
The reliability assessment of systems powered by artificial intelligence (AI) is becoming a crucial step prior to their deployment in safety and mission-critical systems. Recently, many efforts have been made to develop sophisticated techniques to evaluate and improve the resilience of AI models against the occurrence of random hardware faults. However, due to the intrinsic nature of such models, the comparison of the results obtained in state-of-the-art works is crucial, as reference models are missing. Moreover, their resilience is strongly influenced by the training process, the adopted framework and data representation, and so on. To enable a common ground for future research targeting CNN resilience analysis/hardening, this work proposes a first benchmark suite of DL models commonly adopted in this context, providing the models, the training/test data, and the resilience-related information (fault list, coverage, etc.) that can be used as a baseline for fair comparison. To this end, this research identifies a set of axes that have an impact on the resilience and classifies some popular CNN models, in both PyTorch and TensorFlow. Some final considerations are drawn, showing the relevance of a benchmark suite tailored for the resilience context.
- 9 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
- Vol. 45 (1) , 418-427
Open AccessBenchmark Suite for Resilience Assessment of Deep Learning Models
The reliability assessment of systems powered by artificial intelligence (AI) is becoming a crucial step prior to their deployment in safety and mission-critical systems. Recently, many efforts have been made to develop sophisticated techniques to evaluate and improve the resilience of AI models against the occurrence of random hardware faults. However, due to the intrinsic nature of such models, the comparison of the results obtained in state-of-the-art works is crucial, as reference models are missing. Moreover, their resilience is strongly influenced by the training process, the adopted framework and data representation, and so on. To enable a common ground for future research targeting CNN resilience analysis/hardening, this work proposes a first benchmark suite of DL models commonly adopted in this context, providing the models, the training/test data, and the resilience-related information (fault list, coverage, etc.) that can be used as a baseline for fair comparison. To this end, this research identifies a set of axes that have an impact on the resilience and classifies some popular CNN models, in both PyTorch and TensorFlow. Some final considerations are drawn, showing the relevance of a benchmark suite tailored for the resilience context.
- 19 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 25 (1) , 2-3
Special Issue on Defect and Fault Tolerance in VLSI and Nanotechnology Systems (DFTS 2023) in the IEEE Transactions on Device and Materials Reliability
The ten articles in this special issue present innovative research in the field of defect and fault tolerance in VLSI and nanotechnology systems and provide readers with valuable insights into the latest advances and future trends in these challenging research areas. The focus of these articles is on the reliability in the design, technology and testing of electronic devices and systems, integrated circuits, printed modules, as well as methodologies and tools used for reliability and security prediction, verification and design validation.
- 19 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 25 (1) , 2-3
Special Issue on Defect and Fault Tolerance in VLSI and Nanotechnology Systems (DFTS 2023) in the IEEE Transactions on Device and Materials Reliability
The ten articles in this special issue present innovative research in the field of defect and fault tolerance in VLSI and nanotechnology systems and provide readers with valuable insights into the latest advances and future trends in these challenging research areas. The focus of these articles is on the reliability in the design, technology and testing of electronic devices and systems, integrated circuits, printed modules, as well as methodologies and tools used for reliability and security prediction, verification and design validation.
- Open Access
- 21 October 2024
- Published by Elsevier in Computer Science Review
- Vol. 54
Resilience of deep learning applications: A systematic literature review of analysis and hardening techniques
- 21 October 2024
- Published by Elsevier in Computer Science Review
- Vol. 54
Open AccessResilience of deep learning applications: A systematic literature review of analysis and hardening techniques
- Open Access
- 3 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Towards Dependable RISC-V Cores for Edge Computing Devices
The migration of the computation from the cloud into edge devices, i.e., Internet-of-Things (IoTs) devices, reduces the latency and the quantity of data flowing into the network. With the emerging open-source and customizable RISC-V Instruction Set Architecture (ISA), cores based on such ISA are promising candidates for several application domains within the IoT family, such as automotive, Unnamed Aerial Vehicles (UAVs), industrial automation, healthcare, agriculture etc., where power consumption, real-time execution, security and reliability are of highest importance. In this emerging new era of connected RISC-V IoT devices, mechanisms are needed for a reliable and secure execution, still meeting area, energy consumption and computation time constraints of edge devices. We propose three mechanisms towards this goal, i.e., (i) a Root of Trust module for post-quantum secure boot, (ii) hardware checkers against hardware trojan horses and microarchitectural side-channel attacks, and (iii) a fine-grained dual core lockstep mechanism for real-time error detection and correction. The paper illustrates the proposed mechanisms with related motivations and implications, as well as a discussion on future research directions.
- 3 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Open AccessTowards Dependable RISC-V Cores for Edge Computing Devices
The migration of the computation from the cloud into edge devices, i.e., Internet-of-Things (IoTs) devices, reduces the latency and the quantity of data flowing into the network. With the emerging open-source and customizable RISC-V Instruction Set Architecture (ISA), cores based on such ISA are promising candidates for several application domains within the IoT family, such as automotive, Unnamed Aerial Vehicles (UAVs), industrial automation, healthcare, agriculture etc., where power consumption, real-time execution, security and reliability are of highest importance. In this emerging new era of connected RISC-V IoT devices, mechanisms are needed for a reliable and secure execution, still meeting area, energy consumption and computation time constraints of edge devices. We propose three mechanisms towards this goal, i.e., (i) a Root of Trust module for post-quantum secure boot, (ii) hardware checkers against hardware trojan horses and microarchitectural side-channel attacks, and (iii) a fine-grained dual core lockstep mechanism for real-time error detection and correction. The paper illustrates the proposed mechanisms with related motivations and implications, as well as a discussion on future research directions.
- Open Access
- 17 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Computers
- Vol. 72 (4) , 984-997
Fast and Accurate Error Simulation for CNNs Against Soft Errors
The great quest for adopting AI-based computation for safety-/mission-critical applications motivates the interest towards methods for assessing the robustness of the application w.r.t. not only its training/tuning but also errors due to faults, in particular soft errors, affecting the underlying hardware. Two strategies exist: architecture-level fault injection and application-level functional error simulation. We present a framework for the reliability analysis of Convolutional Neural Networks (CNNs) via an error simulation engine that exploits a set of validated error models extracted from a detailed fault injection campaign. These error models are defined based on the corruption patterns of the output of the CNN operators induced by faults and bridge the gap between fault injection and error simulation, exploiting the advantages of both approaches. We compared our methodology against SASSIFI for the accuracy of functional error simulation w.r.t. fault injection, and against TensorFI in terms of speedup for the error simulation strategy. Experimental results show that our methodology achieves about 99% accuracy of the fault effects w.r.t. SASSIFI, and a speedup ranging from 44x up to 63x w.r.t. TensorFI, that only implements a limited set of error models.
- 17 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Computers
- Vol. 72 (4) , 984-997
Open AccessFast and Accurate Error Simulation for CNNs Against Soft Errors
The great quest for adopting AI-based computation for safety-/mission-critical applications motivates the interest towards methods for assessing the robustness of the application w.r.t. not only its training/tuning but also errors due to faults, in particular soft errors, affecting the underlying hardware. Two strategies exist: architecture-level fault injection and application-level functional error simulation. We present a framework for the reliability analysis of Convolutional Neural Networks (CNNs) via an error simulation engine that exploits a set of validated error models extracted from a detailed fault injection campaign. These error models are defined based on the corruption patterns of the output of the CNN operators induced by faults and bridge the gap between fault injection and error simulation, exploiting the advantages of both approaches. We compared our methodology against SASSIFI for the accuracy of functional error simulation w.r.t. fault injection, and against TensorFI in terms of speedup for the error simulation strategy. Experimental results show that our methodology achieves about 99% accuracy of the fault effects w.r.t. SASSIFI, and a speedup ranging from 44x up to 63x w.r.t. TensorFI, that only implements a limited set of error models.
- 2 June 2022
- Published by Elsevier in Journal of Systems Architecture
- Vol. 129
DETON: DEfeating hardware Trojan horses in microprocessors through software ObfuscatioN
- 2 June 2022
- Published by Elsevier in Journal of Systems Architecture
- Vol. 129
DETON: DEfeating hardware Trojan horses in microprocessors through software ObfuscatioN
- 1 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
- Vol. 42 (2) , 462-472
Optimizing the Use of Behavioral Locking for High-Level Synthesis
The globalization of the electronics supply chain requires effective methods to thwart reverse engineering and intellectual property (IP) theft. Logic locking is a promising solution, but there are many open concerns. First, even when applied at a higher level of abstraction, locking may result in significant overhead without improving the security metric. Second, optimizing a security metric is application-dependent and designers must evaluate and compare alternative solutions. We propose a metaframework to optimize the use of behavioral locking during the high-level synthesis (HLS) of IP cores. Our method operates on chip’s specification (before HLS) and it is compatible with all HLS tools, complementing industrial EDA flows. Our metaframework supports different strategies to explore the design space and to select points to be locked automatically. We evaluated our method on the optimization of differential entropy, achieving better results than random or topological locking: 1) we always identify a valid solution that optimizes the security metric, while topological and random locking can generate unfeasible solutions; 2) we minimize the number of bits used for locking up to more than 90% (requiring smaller tamper-proof memories); and 3) we make better use of hardware resources since we obtain similar overheads but with higher security metric.
- 1 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
- Vol. 42 (2) , 462-472
Optimizing the Use of Behavioral Locking for High-Level Synthesis
The globalization of the electronics supply chain requires effective methods to thwart reverse engineering and intellectual property (IP) theft. Logic locking is a promising solution, but there are many open concerns. First, even when applied at a higher level of abstraction, locking may result in significant overhead without improving the security metric. Second, optimizing a security metric is application-dependent and designers must evaluate and compare alternative solutions. We propose a metaframework to optimize the use of behavioral locking during the high-level synthesis (HLS) of IP cores. Our method operates on chip’s specification (before HLS) and it is compatible with all HLS tools, complementing industrial EDA flows. Our metaframework supports different strategies to explore the design space and to select points to be locked automatically. We evaluated our method on the optimization of differential entropy, achieving better results than random or topological locking: 1) we always identify a valid solution that optimizes the security metric, while topological and random locking can generate unfeasible solutions; 2) we minimize the number of bits used for locking up to more than 90% (requiring smaller tamper-proof memories); and 3) we make better use of hardware resources since we obtain similar overheads but with higher security metric.
- 18 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 30 (7) , 938-951
Processor Security: Detecting Microarchitectural Attacks via Count-Min Sketches
The continuous quest for performance pushed processors to incorporate elements such as multiple cores, caches, acceleration units, or speculative execution that make systems very complex. On the other hand, these features often expose unexpected vulnerabilities that pose new challenges. For example, the timing differences introduced by caches or speculative execution can be exploited to leak information or detect activity patterns. Protecting embedded systems from existing attacks is extremely challenging, and it is made even harder by the continuous rise of new microarchitectural attacks (e.g., the Spectre and Orchestration attacks). In this article, we present a new approach based on count-min sketches for detecting microarchitectural attacks in the microprocessors featured by embedded systems. The idea is to add to the system a security checking module (without modifying the microprocessor under protection) in charge of observing the fetched instructions and identifying and signaling possible suspicious activities without interfering with the nominal activity of the system. The proposed approach can be programmed at design time (and reprogrammed after deployment) in order to always keep updated the list of the attacks that the checker is able to identify. We integrated the proposed approach in a large RISC-V core, and we proved its effectiveness in detecting several versions of the Spectre, Orchestration, Rowhammer, and Flush + Reload attacks. In its best configuration, the proposed approach has been able to detect 100% of the attacks, with no false alarms and introducing about 10% area overhead, about 4% power increase, and without working frequency reduction.
- 18 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 30 (7) , 938-951
Processor Security: Detecting Microarchitectural Attacks via Count-Min Sketches
The continuous quest for performance pushed processors to incorporate elements such as multiple cores, caches, acceleration units, or speculative execution that make systems very complex. On the other hand, these features often expose unexpected vulnerabilities that pose new challenges. For example, the timing differences introduced by caches or speculative execution can be exploited to leak information or detect activity patterns. Protecting embedded systems from existing attacks is extremely challenging, and it is made even harder by the continuous rise of new microarchitectural attacks (e.g., the Spectre and Orchestration attacks). In this article, we present a new approach based on count-min sketches for detecting microarchitectural attacks in the microprocessors featured by embedded systems. The idea is to add to the system a security checking module (without modifying the microprocessor under protection) in charge of observing the fetched instructions and identifying and signaling possible suspicious activities without interfering with the nominal activity of the system. The proposed approach can be programmed at design time (and reprogrammed after deployment) in order to always keep updated the list of the attacks that the checker is able to identify. We integrated the proposed approach in a large RISC-V core, and we proved its effectiveness in detecting several versions of the Spectre, Orchestration, Rowhammer, and Flush + Reload attacks. In its best configuration, the proposed approach has been able to detect 100% of the attacks, with no false alarms and introducing about 10% area overhead, about 4% power increase, and without working frequency reduction.
- Open Access
- 7 May 2022
- Published by Elsevier in Journal of Systems Architecture
- Vol. 128, 102543
Is your FPGA bitstream Hardware Trojan-free? Machine learning can provide an answer
- 7 May 2022
- Published by Elsevier in Journal of Systems Architecture
- Vol. 128, 102543
Open AccessIs your FPGA bitstream Hardware Trojan-free? Machine learning can provide an answer
- Open Access
- 11 April 2022
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Internet of Things
- Vol. 3 (3) , 1-29
A Runtime Resource Management and Provisioning Middleware for Fog Computing Infrastructures
The pervasiveness and growing processing capabilities of mobile and embedded systems have enabled the widespread diffusion of the Fog Computing paradigm in the Internet of Things scenario, where computing is directly performed at the edges of the networked infrastructure in distributed cyber-physical systems. This scenario is characterized by a highly dynamic workload and architecture in which applications enter and leave the system, as well as nodes and connections. This article proposes a runtime resource management and provisioning middleware for the dynamic distribution of the applications on the processing resources. The proposed middleware consists of a two-level hierarchy: (i) a global Fog Orchestrator monitoring the architecture status and (ii) a Local Agent on each node, performing a fine-grain tuning of its resources. The co-operation between these components allows one to dynamically adapt and exploit the fine-grain nodes view for fulfilling the defined system-level goals, for example, minimizing power consumption while meeting Quality of Service requirements such as application throughput. This hierarchical architecture and the adopted policies offer a unified optimization strategy that is unique with regard to existing approaches that typically focus on a single aspect of resource management at runtime. A middleware prototype is presented and experimentally evaluated in a Smart Building case study.
- 11 April 2022
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Internet of Things
- Vol. 3 (3) , 1-29
Open AccessA Runtime Resource Management and Provisioning Middleware for Fog Computing Infrastructures
The pervasiveness and growing processing capabilities of mobile and embedded systems have enabled the widespread diffusion of the Fog Computing paradigm in the Internet of Things scenario, where computing is directly performed at the edges of the networked infrastructure in distributed cyber-physical systems. This scenario is characterized by a highly dynamic workload and architecture in which applications enter and leave the system, as well as nodes and connections. This article proposes a runtime resource management and provisioning middleware for the dynamic distribution of the applications on the processing resources. The proposed middleware consists of a two-level hierarchy: (i) a global Fog Orchestrator monitoring the architecture status and (ii) a Local Agent on each node, performing a fine-grain tuning of its resources. The co-operation between these components allows one to dynamically adapt and exploit the fine-grain nodes view for fulfilling the defined system-level goals, for example, minimizing power consumption while meeting Quality of Service requirements such as application throughput. This hierarchical architecture and the adopted policies offer a unified optimization strategy that is unique with regard to existing approaches that typically focus on a single aspect of resource management at runtime. A middleware prototype is presented and experimentally evaluated in a Smart Building case study.