Lucy L. Coria-Oriundo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lucy L. Coria-Oriundo has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Fernando Battaglini
INQUIMAE (CONICET), Departamento de Química Inorgánica, Analítica y Química Física, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Ciudad Universitaria, Pabellón 2, C1428EHA Buenos Aires, Argentina
9 shared publications - Sonia Wirth
Laboratorio de Agrobiotecnología, Departamento de Fisiología, Biología Molecular y Celular, Facultad de Ciencias Exactas y Naturales Universidad de Buenos Aires Ciudad Universitaria Argentina
5 shared publications Fernando Battaglini
Instituto de Química Física de los Materiales Medio Ambiente y Energía
4 shared publications- Omar Azzaroni
Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas, Argentina
4 shared publications - Santiago E. Herrera
Instituto de Química de los Materiales Ambiente y Energía (INQUIMAE‐CONICET) Facultad de Ciencias Exactas y Naturales Universidad de Buenos Aires Buenos Aires Argentina
3 shared publications Esteban Piccinini
2 shared publications
Latest Publications
- 16 September 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (41) , 35632-35644
Enhancing catalytic oxygen reduction via sulfonate and phosphate crosslinkers in redox polyelectrolyte-based O 2 –glucose membraneless enzymatic biofuel cells
The development of enzymatic biofuel cells (EBFCs) that operate under mild conditions and do not require membranes as separators is crucial for advancing low-power device technologies. The use of redox mediators for bacterial laccases represents a promising approach in these systems. In this study, a redox polyelectrolyte based on branched polyethyleneimine modified with an osmium complex (Os(im)PEI) was employed as the mediator. Os(im)PEI aggregates the nanomolar scale in the presence of species containing sulfonate or phosphate groups, depending on their concentration and ionic strength (IS). At 1 mM tripolyphosphate (TPP) under high IS, the polyelectrolyte matrix yielded particles formation (400 nm), while with 50 mM HEPES under low IS resulted in smaller particles (220 nm) along with free polyelectrolyte. These redox particles were self-assembled layer-by-layer in combination with the bacterial laccase SilA to construct a biocathode. The catalytic current density increased consistently up to the third bilayer in both systems, with the highest adsorbed mass observed in the presence of TPP. Notably, the incorporation of both species enhanced the redox polyelectrolyte’s function as an enzyme mediator compared to its free form. This enhancement, linked to increased SilA adsorption, may stem from stronger surface electrostatic interactions and changes in overall wettability—attributable to the polyelectrolyte’s globular conformation—or from specific interactions between phosphate groups and basic residues on laccase. Using these biocathodes along with a bioanode, O2-glucose membraneless EBFCs were constructed under neutral pH and static conditions, achieving power densities ranging from 25 to 47 µW cm-2. These values were comparable to, and in some cases exceeded, those reported in previous studies under similar operating conditions.
- 16 September 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (41) , 35632-35644
Enhancing catalytic oxygen reduction via sulfonate and phosphate crosslinkers in redox polyelectrolyte-based O 2 –glucose membraneless enzymatic biofuel cells
The development of enzymatic biofuel cells (EBFCs) that operate under mild conditions and do not require membranes as separators is crucial for advancing low-power device technologies. The use of redox mediators for bacterial laccases represents a promising approach in these systems. In this study, a redox polyelectrolyte based on branched polyethyleneimine modified with an osmium complex (Os(im)PEI) was employed as the mediator. Os(im)PEI aggregates the nanomolar scale in the presence of species containing sulfonate or phosphate groups, depending on their concentration and ionic strength (IS). At 1 mM tripolyphosphate (TPP) under high IS, the polyelectrolyte matrix yielded particles formation (400 nm), while with 50 mM HEPES under low IS resulted in smaller particles (220 nm) along with free polyelectrolyte. These redox particles were self-assembled layer-by-layer in combination with the bacterial laccase SilA to construct a biocathode. The catalytic current density increased consistently up to the third bilayer in both systems, with the highest adsorbed mass observed in the presence of TPP. Notably, the incorporation of both species enhanced the redox polyelectrolyte’s function as an enzyme mediator compared to its free form. This enhancement, linked to increased SilA adsorption, may stem from stronger surface electrostatic interactions and changes in overall wettability—attributable to the polyelectrolyte’s globular conformation—or from specific interactions between phosphate groups and basic residues on laccase. Using these biocathodes along with a bioanode, O2-glucose membraneless EBFCs were constructed under neutral pH and static conditions, achieving power densities ranging from 25 to 47 µW cm-2. These values were comparable to, and in some cases exceeded, those reported in previous studies under similar operating conditions.
- 11 June 2025
- Published by Springer Nature in World Journal of Microbiology and Biotechnology
- Vol. 41 (6) , 1-12
Laccase-catalyzed conversion of residual agricultural biomass to lignin-derived aromatic compounds
Lignin, one of the three major components of lignocellulosic biomass, is a promising feedstock for value-added bioproducts. However, its utilization is limited by its intrinsic heterogeneity and recalcitrance. Laccases are oxidoreductases that can act on a wide range of phenolic and aromatic compounds. SilA is a small robust thermostable laccase from the actinobacterium Streptomyces ipomoea that is active across a broad range of reaction conditions. In this study, we demonstrated that SilA transforms the lignin of sugar cane straw residue that has been pretreated by steam explosion (SCRSE), into lignin-derived aromatic compounds (LDACs), specifically 4-hydroxybenzoate, vanillate, syringate, p-coumarate and ferulate, which are in great demand across diverse industries, including chemical, pharmaceutical, food, health, and cosmetic. Additionally, incubation of SCRSE with SilA also produced acid-precipitable polymeric lignin (APPL), as an indirect indication of delignification. Finally, when the major fraction of SCRSE polysaccharides was removed by the commercial enzymatic cocktail Cellic® CTec2, there was a significant increase in the release of LDACs, particularly p-coumarate. This research demonstrates a novel biocatalytic approach to transform lignin from the main residual solid waste stream of lignocellulosic biomass after the hydrolysis of most of the structural polysaccharides, particularly in the context of sugar cane biorefineries, contributing to the sustainable and efficient use of agricultural biomass waste.
- 11 June 2025
- Published by Springer Nature in World Journal of Microbiology and Biotechnology
- Vol. 41 (6) , 1-12
Laccase-catalyzed conversion of residual agricultural biomass to lignin-derived aromatic compounds
Lignin, one of the three major components of lignocellulosic biomass, is a promising feedstock for value-added bioproducts. However, its utilization is limited by its intrinsic heterogeneity and recalcitrance. Laccases are oxidoreductases that can act on a wide range of phenolic and aromatic compounds. SilA is a small robust thermostable laccase from the actinobacterium Streptomyces ipomoea that is active across a broad range of reaction conditions. In this study, we demonstrated that SilA transforms the lignin of sugar cane straw residue that has been pretreated by steam explosion (SCRSE), into lignin-derived aromatic compounds (LDACs), specifically 4-hydroxybenzoate, vanillate, syringate, p-coumarate and ferulate, which are in great demand across diverse industries, including chemical, pharmaceutical, food, health, and cosmetic. Additionally, incubation of SCRSE with SilA also produced acid-precipitable polymeric lignin (APPL), as an indirect indication of delignification. Finally, when the major fraction of SCRSE polysaccharides was removed by the commercial enzymatic cocktail Cellic® CTec2, there was a significant increase in the release of LDACs, particularly p-coumarate. This research demonstrates a novel biocatalytic approach to transform lignin from the main residual solid waste stream of lignocellulosic biomass after the hydrolysis of most of the structural polysaccharides, particularly in the context of sugar cane biorefineries, contributing to the sustainable and efficient use of agricultural biomass waste.
- 21 February 2024
- Published by Elsevier in Journal of Power Sources
- Vol. 599
Soluble sulfonated polyaniline as an aqueous catholyte for battery applications
- 21 February 2024
- Published by Elsevier in Journal of Power Sources
- Vol. 599
Soluble sulfonated polyaniline as an aqueous catholyte for battery applications
- 28 August 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 127 (35) , 7636-7647
Phase Behavior and Electrochemical Properties of Highly Asymmetric Redox Coacervates
This work reports the phase behavior and electrochemical properties of liquid coacervates made of ferricyanide and poly(ethylenimine). In contrast to the typical polyanion/polycation pairs used in liquid coacervates, the ferricyanide/poly(ethylenimine) system is highly asymmetric because poly(ethylenimine) has approximately 170 charges per molecule, while ferricyanide has only 3. Two types of phase diagrams were measured and fitted with a theoretical model. In the first type of diagram, the stability of the coacervate was studied in the plane given by the concentration of poly(ethylenimine) versus the concentration of ferricyanide for a fixed concentration of added monovalent salt (NaCl). The second type of diagram involved the plane given by the concentration of poly(ethylenimine) vs the concentration of the added monovalent salt for a fixed poly(ethyleneimine)/ferricyanide ratio. Interestingly, these phase diagrams displayed qualitative similarities to those of symmetric polyanion/polycation systems, suggesting that coacervates formed by a polyelectrolyte and a small multivalent ion can be treated as a specific case of polyelectrolyte coacervate. The characterization of the electrochemical properties of the coacervate revealed that the addition of monovalent salt greatly enhances charge transport, presumably by breaking ion pairs between ferricyanide and poly(ethylenimine). This finding highlights the significant influence of added salt on the transport properties of coacervates. This study provides the first comprehensive characterization of the phase behavior and transport properties of asymmetric coacervates and places these results within the broader context of the better-known symmetric polyelectrolyte coacervates.
- 28 August 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 127 (35) , 7636-7647
Phase Behavior and Electrochemical Properties of Highly Asymmetric Redox Coacervates
This work reports the phase behavior and electrochemical properties of liquid coacervates made of ferricyanide and poly(ethylenimine). In contrast to the typical polyanion/polycation pairs used in liquid coacervates, the ferricyanide/poly(ethylenimine) system is highly asymmetric because poly(ethylenimine) has approximately 170 charges per molecule, while ferricyanide has only 3. Two types of phase diagrams were measured and fitted with a theoretical model. In the first type of diagram, the stability of the coacervate was studied in the plane given by the concentration of poly(ethylenimine) versus the concentration of ferricyanide for a fixed concentration of added monovalent salt (NaCl). The second type of diagram involved the plane given by the concentration of poly(ethylenimine) vs the concentration of the added monovalent salt for a fixed poly(ethyleneimine)/ferricyanide ratio. Interestingly, these phase diagrams displayed qualitative similarities to those of symmetric polyanion/polycation systems, suggesting that coacervates formed by a polyelectrolyte and a small multivalent ion can be treated as a specific case of polyelectrolyte coacervate. The characterization of the electrochemical properties of the coacervate revealed that the addition of monovalent salt greatly enhances charge transport, presumably by breaking ion pairs between ferricyanide and poly(ethylenimine). This finding highlights the significant influence of added salt on the transport properties of coacervates. This study provides the first comprehensive characterization of the phase behavior and transport properties of asymmetric coacervates and places these results within the broader context of the better-known symmetric polyelectrolyte coacervates.
- 24 July 2023
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 19 (31) , 6018-6031
Unexpected enhancement of pH-stability in Au 3+ /Ag + loaded H-bonded layer-by-layer thin films
Loading H-bonded layer-by-layer thin films with Au 3+ enhances the pH-stability.
- 24 July 2023
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 19 (31) , 6018-6031
Unexpected enhancement of pH-stability in Au 3+ /Ag + loaded H-bonded layer-by-layer thin films
Loading H-bonded layer-by-layer thin films with Au 3+ enhances the pH-stability.
- Open Access
- 27 May 2023
- Published by MDPI AG in Biosensors
- Vol. 13 (6) , 582
Development of a Redox-Polymer-Based Electrochemical Glucose Biosensor Suitable for Integration in Microfluidic 3D Cell Culture Systems
The inclusion of online, in situ biosensors in microfluidic cell cultures is important to monitor and characterize a physiologically mimicking environment. This work presents the performance of second-generation electrochemical enzymatic biosensors to detect glucose in cell culture media. Glutaraldehyde and ethylene glycol diglycidyl ether (EGDGE) were tested as cross-linkers to immobilize glucose oxidase and an osmium-modified redox polymer on the surface of carbon electrodes. Tests employing screen printed electrodes showed adequate performance in a Roswell Park Memorial Institute (RPMI-1640) media spiked with fetal bovine serum (FBS). Comparable first-generation sensors were shown to be heavily affected by complex biological media. This difference is explained in terms of the respective charge transfer mechanisms. Under the tested conditions, electron hopping between Os redox centers was less vulnerable than H2O2 diffusion to biofouling by the substances present in the cell culture matrix. By employing pencil leads as electrodes, the incorporation of these electrodes in a polydimethylsiloxane (PDMS) microfluidic channel was achieved simply and at a low cost. Under flow conditions, electrodes fabricated using EGDGE presented the best performance with a limit of detection of 0.5 mM, a linear range up to 10 mM, and a sensitivity of 4.69 μA mM−1 cm−2.
- 27 May 2023
- Published by MDPI AG in Biosensors
- Vol. 13 (6) , 582
Open AccessDevelopment of a Redox-Polymer-Based Electrochemical Glucose Biosensor Suitable for Integration in Microfluidic 3D Cell Culture Systems
The inclusion of online, in situ biosensors in microfluidic cell cultures is important to monitor and characterize a physiologically mimicking environment. This work presents the performance of second-generation electrochemical enzymatic biosensors to detect glucose in cell culture media. Glutaraldehyde and ethylene glycol diglycidyl ether (EGDGE) were tested as cross-linkers to immobilize glucose oxidase and an osmium-modified redox polymer on the surface of carbon electrodes. Tests employing screen printed electrodes showed adequate performance in a Roswell Park Memorial Institute (RPMI-1640) media spiked with fetal bovine serum (FBS). Comparable first-generation sensors were shown to be heavily affected by complex biological media. This difference is explained in terms of the respective charge transfer mechanisms. Under the tested conditions, electron hopping between Os redox centers was less vulnerable than H2O2 diffusion to biofouling by the substances present in the cell culture matrix. By employing pencil leads as electrodes, the incorporation of these electrodes in a polydimethylsiloxane (PDMS) microfluidic channel was achieved simply and at a low cost. Under flow conditions, electrodes fabricated using EGDGE presented the best performance with a limit of detection of 0.5 mM, a linear range up to 10 mM, and a sensitivity of 4.69 μA mM−1 cm−2.
- 26 September 2022
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 4 (10) , 7759-7769
Current Response Enhancement According to the Doping Anion’s Nature in Redox Polyelectrolyte─Enzyme Assemblies
- 26 September 2022
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 4 (10) , 7759-7769
Current Response Enhancement According to the Doping Anion’s Nature in Redox Polyelectrolyte─Enzyme Assemblies
- 26 April 2021
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 17 (20) , 5240-5247
Enzymes hosted in redox-active ionically cross-linked polyelectrolyte networks enable more efficient biofuel cells
Redox mediators are pivotal players in the electron transfer process between enzymes and electrodes. We present an alternative approach for redox mediation based on branched polyethyleneimine (BPEI) modified with an osmium complex. This redox polyelectrolyte is crosslinked with phosphate to produce colloidal particles with a diameter of ca. 1 μm, which, combined with glucose oxidase (GOx), can form electroactive assemblies through either layer by layer assembly (LbL) or one-pot drop-casting (OPDC). The addition of NaCl to these colloidal systems induces the formation of films that otherwise poorly grow, presenting an outstanding catalytic current. The system was tested as a bioanode delivering a power output of 148 μW per nmol of mediator. These results are explained in terms of the interactions of the ions with the polyelectrolyte and represent a new route for the development of bioelectrochemical devices involving redox mediators and enzymes.
- 26 April 2021
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 17 (20) , 5240-5247
Enzymes hosted in redox-active ionically cross-linked polyelectrolyte networks enable more efficient biofuel cells
Redox mediators are pivotal players in the electron transfer process between enzymes and electrodes. We present an alternative approach for redox mediation based on branched polyethyleneimine (BPEI) modified with an osmium complex. This redox polyelectrolyte is crosslinked with phosphate to produce colloidal particles with a diameter of ca. 1 μm, which, combined with glucose oxidase (GOx), can form electroactive assemblies through either layer by layer assembly (LbL) or one-pot drop-casting (OPDC). The addition of NaCl to these colloidal systems induces the formation of films that otherwise poorly grow, presenting an outstanding catalytic current. The system was tested as a bioanode delivering a power output of 148 μW per nmol of mediator. These results are explained in terms of the interactions of the ions with the polyelectrolyte and represent a new route for the development of bioelectrochemical devices involving redox mediators and enzymes.
- 29 September 2020
- Published by Wiley in ChemistrySelect
- Vol. 5 (36) , 11391-11398
Redox Polyelectrolyte Modified Gold Nanoparticles Enhance the Detection of Adenosine in an Electrochemical Split‐Aptamer Assay
We present an electrochemical sandwich‐type assay based on the splitting of an aptamer into two fragments. Gold nanoparticles are modified with one of the fragments and a redox polyelectrolyte. The first is used as the recognition element, while the other for the electrochemical signal generation. The split‐aptamer used here can detect adenosine, used as a model system for recognizing small molecules. The multiple binding sites on the nanoparticle, along with the high number of redox probes, yield a selective and sensitive assay for adenosine, achieving a limit of detection of 3.1 nM and a linear range up to 75 nM. The obtained results are analyzed in terms of the nanoparticle and electrode architectures. The assay can be easily extended to other small molecules and sandwich assays, representing a promising tool for detecting metabolites at the nanomolar level.
- 29 September 2020
- Published by Wiley in ChemistrySelect
- Vol. 5 (36) , 11391-11398
Redox Polyelectrolyte Modified Gold Nanoparticles Enhance the Detection of Adenosine in an Electrochemical Split‐Aptamer Assay
We present an electrochemical sandwich‐type assay based on the splitting of an aptamer into two fragments. Gold nanoparticles are modified with one of the fragments and a redox polyelectrolyte. The first is used as the recognition element, while the other for the electrochemical signal generation. The split‐aptamer used here can detect adenosine, used as a model system for recognizing small molecules. The multiple binding sites on the nanoparticle, along with the high number of redox probes, yield a selective and sensitive assay for adenosine, achieving a limit of detection of 3.1 nM and a linear range up to 75 nM. The obtained results are analyzed in terms of the nanoparticle and electrode architectures. The assay can be easily extended to other small molecules and sandwich assays, representing a promising tool for detecting metabolites at the nanomolar level.
- 22 September 2020
- Published by Springer Nature in Journal of Porous Materials
- Vol. 28 (1) , 261-269
Functionalized hierarchical wrinkled-silica spheres for laccases immobilization
- 22 September 2020
- Published by Springer Nature in Journal of Porous Materials
- Vol. 28 (1) , 261-269
Functionalized hierarchical wrinkled-silica spheres for laccases immobilization